A dialog box, "resetting vi: some.vi" comes up when exiting labview.

On closing labview, a dialog box comes up. It says "resetting vi:nameofsome.vi". It stays open and will not allow wondows to shut down normally. This started when I added a DAQassistant for a frequency measurement on a usb 9401. I appreciate any comments.
Solved!
Go to Solution.

There is a really good chance that this is happening because you are using the "Abort VI" button in the toolbar. It is always best, when using a while loop, to allow all processes to finish before aborting the VI. This is particularly important when using driver VIs, such as DAQmx. I have linked a KB on this matter that you can look into. I hope this helps!
http://digital.ni.com/public.nsf/allkb/A7FB51274692BD72862565DF005062B1?OpenDocument
National Instruments
Applications Engineer

Similar Messages

Adobe CS5 Applications open/save dialog boxes size always resets

So, since the Mountain Lion update, all of my Adobe CS5 save/open window dialog boxes reset their size each time. In my case they are too small, causing me to have to enlarge the window out every time, to be able to see file names/locations etc.
Not a massive issue, but rather annoying when I think of the time I'm wasting resizing windows hundreds of times a day, especially as this never used to happen.
Is this an Adobe issue?
Can anyone using Adobe CS6 on Mountain Lion tell me if they experience this too?
Anyone on using Adobe CS5 on OSX-10.8.2 experienced this too, any suggestions?

I came here looking for this very same help. It is driving me crazy. It happened when I recently updated to Mountain Lion. It has to be a Mountain Lion problem, as I'm using the very same Adobe products that I've used for years and it never occurred before.
I'm also having the problem with Mountain Lion resizing my coverflow finder windows every time I open them. Also completely annoying.
How do I get the windows (saving and coverflow) to stay in the same position as I last had them versus resetting to some default position every time I open them or click on a new file? Very annoying.

Dialog Boxes

I'm trying to decide whether to convert from Visual Basic to Dreamweaver for content (and ultimately, website development). Does DW have a dialog box feature or some capability to open a Microsoft Word or Excel file? (the actual file, not just the resident data)
Until I develop a website, I'd like to use DW as a shell to manage files in presentations, including Microsoft, Flash, XML etc... Does this make sense or am I barking up the wrong tree?
New to all of this,
Mike

Probably stating the obvious here, but anyway...
Each of the file formats you've mentioned will require specific software installation and browser plugins in order to view them from the Web. Well, I'm not sure if MS Office, per se, has any plugins for browsers. Users will typically get a Save As dialog box when clicking on a file without a corresponding browser plugin.
The Flash plugin has a very large installed base, so unless version is an issue, that should work well. PDF is well known, too, but users can and do configure PDF browser plugins how they like. That is, some users read PDFs in the browser and some read PDFs in the external PDF reader (typically Adobe Reader).
AFAIK, RTF files will be displayed in an external application, but I think all typical desktop/laptop OSen come with an RTF capable program installed.
MS Office is a generic title for several different suites of programs that create several different file formats. These files will very likely require the visitor to install an appropriate MS Office (do they need Access and Outlook?) suite - or Open Office.
The above requirements will still apply whether you use AIR, Director, Flash, a Web page, or VB to link to those files. But yes, you can create a Web page with links to those file formats.
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.

Why can I sometimes paste text into a revision history dialog box and other times cannot?

Why can I sometimes paste copied text (from another VI's revision history, for instance or from anywhere else) into a revision history dialog box and other times cannot? All versions of LabVIEW! It's something like the control key becomes diabled. I've noticed the same thing when saving many VI's at once, some will let you paste into revision history and others will not. Aren't all VI's created equally when it comes to revision history? All versions of LabVIEW since 3 have plagued me with this problem.

Hello,
If you'd like to add text to the revision history of a VI, you can
paste into the Comment box and add all of your text at once. The
history itself can be read from this window, but cannot be directly
edited. The History field is read-only in the dialog box.
If you feel this should not be the case, your best course of action is
to express your desire for added functionality to our developers on the Product Feedback page of our website.
Message Edited by MattP on 12-19-2006 12:04 PM
Cheers,
Matt Pollock
National Instruments

How to use save as dialog box in swing

hello,
at the time of start the application by clicking the button, i hv to give the path to save my output file, how can i used this dialog box
thanks

[http://java.sun.com/docs/books/tutorial/uiswing/components/filechooser.html]

Dialog box pblm in for loop

pl check this code sample at once..
for(int i = 0 ;i< sDoc.sAwData.smVec_List.size() ; i++)
     st.execute(sqlQuery);
     System.out.println("Tables Created ");
     JOptionPane.showMessageDialog (this,"Tables Created","Tables Title",JOptionPane.WARNING_MESSAGE);
i am executing the sqlQuery in for loop
as i am keeping the st.execute(sqlQuery) in for loop usually it will iterates that many no of times according to "i";
i also have to display the Dialog box using JOptionPane at one time only.
when the sqlQuery is successfully executed.
as i kept that dialog in for loop it is displaying morethan one time according to "i";
is there anyway to display that dialog at single time ??
pl give me some suggestions and if possible along with some sample code using for loop
thanks in advance

If you want to display the dialog box only once, put
it outside the loop!!Thankyou
but the pblm is when i keep that dialog box in outside the for loop, that will display even the sql query fails to execute the statement.
i want to display that dialog if the sql query executing
successfully.
thanksinadvance
yours
rajesh

Open Model Dialog Boxes in ADF Faces

I have a comments icon in a jspx page, which when clicked should open a model dialog box, to enter some comments and save to the database. how can it be achieved?
Uday

Uday,
Have a read of the Developer's guide topic "Using Popup Dialogs" - in the ADF Developer's Guide for Forms/4GL Developers, it's section 19.3.
John

Spreadsheet Add-in connect dialog box do not appear after clean EPM-install

Clean install of EPM with allmost all values default.
version 11.1.2.1 on Win server 2008R2 and office 2010 32bit.
Smartview seems to function properly.
My impression from the documentation is that an installation of spreadsheet add-in does not require any post configuration, but maybe I am misstaken.
So what needs to be done for spreadsheet add-in to show connect dialog box?
Grant some kind of access in shared services?
Change some environment variable?
etc etc.
Edited by: 859699 on 2011-jul-20 05:30

Seems as if there is something fishy with the Essbase Java API, can this cause trouble for the Add-in?
When using the foundation diagnostic tool I get:
FAILED SVR: Essbase Java API Launch external checker with next command: C:\Oracle\MW\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** xxxxxxxx:****** http://xxxxxxxx:13080/aps/JAPI
Error: EPMVLD-01011: Result at EssbaseJAPIConnect.main(EssbaseJAPIConnect.java; Error message: 19)
Recommended Action: Make sure external checker is working.
When I try to launch that path manually I get: "The system cannot find the path specified."

Dialog box message using conditon

Hello Sir,
Actually i use numeric conditioned case structure when it fells that condition it gives me some dialog box which contais some message.
but when i click on ok button of one button dialog box, it does not disappears .
how i feed the numeric value inside that numeric control..
for that perpose i search a lot i got something dynamically calling of subvi but i do not know how to make this dyanamically called subvi.,
I need to know about dynamic subvi(pop-up vi)regarding dialog box...
But i use labview 8.5 thats why i am not able to open that example because it is in labview 5.0
Can you please tell me how to open that example ??
Example Program: Using VI Server to Call SubVIs that Run Parallel and Independently of the Calling V...
Thanks and Regard,
Ashwini Lele
Attachments:
Untitled new.vi ‏16 KB

Ashwini,
I don't understand what your exact problem is, but i can give you some feedback on the VI:
1) It is good to include timing into loops. But your comment implies, that you do not use timing in loops which are not connected to UI-controls. This is bad. You should always include timing into loops except if you want something (which has to be finit in execution!) to execute as fast as possible.
2) Your timing is 1s. This is far too long for proper interaction. Tests showed, that delays about some 100ms lead to misusage of the application. So please lower the time to something around 100-250 ms.
3) The VI checks "MR" against 4 and then decides if it should continue in the loop or to show the dialog. This is not good since the comparison is only done once in the beginning.
4) Never use the "run continuous" button!
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Using onclick events in the javascript dialog box

hi,
Iam creating dialog box to get some inputs and use it for batch processes. so, i need onclick events on that dialog box.
for example:
in my dialog box, i fix a browse button(check box) and connect the choose folder box. but, after i click okay button only i get the choose folder box. i need to see the choose folder dialog box after click the check box.. is it possible???
regards,
Subha oviya

hi bob,
The following code shows a dialog box.
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
var myDialog = app.dialogs.add({name:" Dialog Onclick Test", canCancel:true});
with(myDialog)
with(dialogColumns.add())
with(dialogRows.add())
with(dialogColumns.add())
var browse_check = checkboxControls.add({staticLabel:"Browse",checkedState:false});
if(myDialog.show() == true)
if(browse_check.checkedState == true)
var filefolder = Folder.selectDialog("Choose Files Folder");
This is my code. After run this script a dialog box appear on the screen. we check the browse check box and then click he ok button. after then a "choose folder dialog box" will appear.
i need to see the "choose folder dialog box" before press the ok button and after check the check box. IS IT POSSIBLE?
Regards,
Subha

Dialog boxes looking strange

Since the last update to the OS, all of my dialog boxes and even some programs have looked strange. Here are some examples:
http://cl.ly/1RU
http://cl.ly/1QF
http://cl.ly/g5
Does anyone have any idea what could be going on or how I could go about fixing it?

I finally had time to reinstall the OS from the DVD. I did not reformat and reinstall, just a reinstall. It did not work, my dialog boxes still look wrong. Does anyone have any other suggestions?

HT6065 Fixing file display speed in save and open dialog boxes

Has anyone else had issues with the speed at which a folder's contents are listed in a save dialog box? I will select a folder when saving a file and it will take 10-12 seconds of the spinning cog before it displays the list of files. Folder contents inside of that display their contents when clicked on right away but the first level selected is always very slow. It was fine in OS 10.8. I did a clean install of OS 10.9.

Has anyone else had issues with the speed at which a folder's contents are listed in a save dialog box? I will select a folder when saving a file and it will take 10-12 seconds of the spinning cog before it displays the list of files. Folder contents inside of that display their contents when clicked on right away but the first level selected is always very slow. It was fine in OS 10.8. I did a clean install of OS 10.9.

Problem With File Download Dialog Box

Hi all,
I have jsp page that allows a user to export oracle data to excel.
I have these code in my page:
<%@ page contentType="application/vnd.ms-excel" %>
response.setContentType ("application/vnd.ms-excel");
response.setHeader ("Content Disposition",
"filename=\"historicalrate.xls\"");
I run the page and it popups a file download dialog box with Open and Save buttons.
When I click the Save button a Save As window opens with a hr.xsl file name and Microsoft Excel Workbook(*.xls) as save type. It is what I want.
The problem I have is when I click the Open button on the file download dialog box it displays data in excel format on a browser well. Then I click File > save as on browser's tool bar the Save As window pop up with no file name and a default Text(tab delimited)(*.txt).
I need the file name and Microsoft Excel Workbook(*.xls) as default save type.
Any help would be greatly appreciated.
Please help
Thanks

I have the same problem with hui_ling.
When user click on "Open", Excel start and open excel file correctly but the file name on excel title bar. 'Cause the file name is in Japanese characters. Any one can help me?
Message was edited by:
TNTVN

I don't know what to ask for. Need a dialog box for a erorr

Can anyone tell me or show me a sample of code the will allow me to have an error dialog box.
I have a date that when the date format is wrong a dialog box pops up and informs the user of the correct date format.
This is the code that changes the background of the text box to red and stops the user for going on. I would be nice to have a dialog instead.
void DOBJText_focusLost(FocusEvent e) {
try
if (! DOBJText.getText().equals(""))
SimpleDateFormat df = new SimpleDateFormat("dd/mm/yyyy");
Date d = df.parse(DOBJText.getText());
DOBJText.setBackground(Color.white);
else
DOBJText.setBackground(Color.white);
catch (ParseException pe)
DOBJText.grabFocus();
DOBJText.setBackground(Color.red);
Thanks for any help
Craig

Sorry I should have looked Harder as I have found this.
the problem is that it opens up twice
anyone knows why this would happen ??
this is the code
void DOBJText_focusLost(FocusEvent e) {
try
if (! DOBJText.getText().equals(""))
SimpleDateFormat df = new SimpleDateFormat("dd/mm/yyyy");
Date d = df.parse(DOBJText.getText());
DOBJText.setBackground(Color.white);
else
DOBJText.setBackground(Color.white);
catch (ParseException pe)
JOptionPane.showMessageDialog( this,
"Date format needs to be DD/MM/YYYY", "Date Format Error",
JOptionPane.ERROR_MESSAGE );
}

Return key breaks dialog boxes

I have illustrator cs5 on snow leopard. When I open up a dialog box I often try to push enter when I'm done typing stuff to close it. The OK button is highlighted so you'd think this would work. But no, instead it just completely breaks the dialog. Clicking ok or cancel after pressing return does nothing. The dialog won't go away so I can't do anything with the rest of the program. I have to force quit and restart it, losing all my work. Does anyone know how to fix this?

Try this first
PC
1. Quit Illustrator.
2. Rename the AIPrefs file (for example, to AIPrefs.old) in the Users/(user)/AppData/Roaming/Adobe/Adobe Illustrator CS3 Settings folder.
3. Start Illustrator. Illustrator creates a new preferences file.
Mac
1. Quit Illustrator.
2.Go to User/username/Library/Preferences/ Adobe illustrator CS4 Settings and trash the settings folder, the whole folder not just the contents of the folder..
3. Start Illustrator. Illustrator creates a new preferences file.

A dialog box, "resetting vi: some.vi" comes up when exiting labview.

Similar Messages

Maybe you are looking for