A display, tv service, and a MBP

I’ll be going off to college soon, and as such, I’m trying to consolidate the amount of things I have to bring. I was interesting in using my external monitor as both my TV screen and my computer monitor. What is the best way to go about doing this?
I have found two solutions thus far, the first being to buy a KVM type device to switch the display over to the display to and from computer and tv, the second being to buy a box to run the tv into the computer and watching it in a window on the desktop. The problem I see with the first one is that, quite frankly, I couldn’t find a box to do this. The problem with the second one is that I don’t want my computer to be too tasked by the tv processing, and I couldn’t find a good box to take the raw tv wire into the computer.
Any suggestions would be greatly welcomed.

i am thinking of doing the same thing.. bringing my macbook pro and my 20.1" widescreen display.
i also would like some sort of tv tuner.. i'm thinking about eyetv.
http://www.elgato.com/
but the only thing is i cannot play a game and watch the tv btwn rounds..
i don't think i can run it straight to the monitor without a computer btwn.
any other suggestions?

Similar Messages

  • Iphone 3gs displays no service and cannot activate

    I cannot afford a smartphone, so my friend has given me his old iPhone 3GS when he upgraded to a newer model.
    the phone has obviously been wiped so that it's as if it just came out the factory.
    I enter the language, WiFi network info, etc. have also tried multiple WiFi hotspots, including my home Netgear/AOL, parents Huawei/TalkTalk and a pub's technicolor/plusnet.
    whenever i try to activate it, the top bar says "Searching..." and then eventually "no service", and i get a message saying the activation server is unavailable, and have tried again and again to no avail. have tried powering off, removing and re-inserting the SIM, then powering up - same errors. the SIM pins appear all present and not broken/bent etc when I look into the device.
    All I can say about the make/model is that it's an iPhone A1303, so it's a 3GS (Identify your iPhone model - Apple Support) . 16GB capacity.
    I have no way of knowing the iOS version, IMEI or baseband revision (unless there's a mac/iTunes way of getting it?)
    my friend is certain that he has never jailbroken the device, and that it has always been on O2 (the same network as me).
    my SIM works in my old Nokia, receives texts/calls etc. my Nokia gets all 4 bars of signal.
    I have also been in to visit an O2 shop, and had my tariff upgraded to one for a smartphone. They're certain it's not an O2 problem. I've probably had this SIM at least 8 years.
    Have tried activating it by itself, and via iTunes 10.6.3(25) on Mac 10.6.8. iTunes says there is no SIM installed.
    is the phone somehow blocked? how would i find out if it was? is it possible that it has been hacked to support O2 instead of another network (by a shop) - and that by scrubbing the data, it has wiped out the hack (in which case, how do i get the phone's ios/baseband/IMEI/original network)? is this a really silly thing like having to deactivate my old phone or having to register the iPhone with O2? is this a problem with the SIM, the phone hardware, the firmware or iOS? what if i got his old SIM - would that activate the phone, and is the phone just not accepting a different SIM than the original one?

    Here's what you do
    1.Make sure your phone is not plugged into the computer.
    2. Put the iPhone into recovery mode (this is NOT DFU mode). Do this by
         a). Hold down both the power/sleep button and the home button until the screen turns black/off
         b). As soon as this happens release the power button but NOT the home button
         c). If done correctly then the Apple logo will appear, KEEP HOLDING THE HOME BUTTON and eventually a connect to itunes graphic will appear. You can release the home button
    3. With the connect to itunes graphic on the screen, plug your phone into the computer. iTunes will start up if it is not already on, and then will say the phone needs restoring. Ignore this and COMPLETELY quit iTunes.
    4. With iTunes off and the graphic still on the phone screen, hold down both the power/sleep and the home button again for 9 seconds (count 100, 200, 300...) or until the screen goes black
    5. When the screen goes black release the home button straight away.
    6. It will start up with the iPhone activation screen ignore this. iTunes should have started up, if not do so. Go to the iPhone tab and either resotre from backup or set up as a new phone.
    You're welcome

  • [SOLVED] systemd display-manager.service problem

    Hi!
    After the upgrade of systemd, i noticed today this error in dmesg:
    systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    systemctl status display-manager.service
    display-manager.service
    Loaded: error (Reason: No such file or directory)
    Active: inactive (dead)
    The strange thing is why systemd tries to load a service that doesn't exist! And what is this unit for? I'm using slim to load my xfce desktop, and everything works well...
    Any idea?
    Thanks!
    EDIT: Uhm, may be the alias in slim.service, set to display-manager.service, is the problem? Or may be this is not a problem, but it is its normal behaviour , and i misunderstood something! Is it?
    Last edited by nierro (2012-07-15 17:13:42)

    nierro wrote:
    Hi!
    After the upgrade of systemd, i noticed today this error in dmesg:
    systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    systemctl status display-manager.service
    display-manager.service
    Loaded: error (Reason: No such file or directory)
    Active: inactive (dead)
    The strange thing is why systemd tries to load a service that doesn't exist! And what is this unit for? I'm using slim to load my xfce desktop, and everything works well...
    Any idea?
    Thanks!
    EDIT: Uhm, may be the alias in slim.service, set to display-manager.service, is the problem? Or may be this is not a problem, but it is its normal behaviour , and i misunderstood something! Is it?
    There has been a change regarding display managers. up until now they were WantedBy graphical.target, which was kind of stupid because this allowed you to enable multiple display managers.
    Instead graphical.target now Wants display-manager.service and all display managers are supposed to install the appropriate Alias. Afaik all display manager service files have been updated ragarding this and a "systemctl reenable slim.service" should fix it.

  • I have a macbook pro with lion os. and i want to connect it to my optoma dlp projector. when i connect through a mini display to vga adapter in MBP it detects as OPTOMA XGA but no image on the screen.

    i have a macbook pro. i want to connect it to projector and i have a minidisplay to vga adapter. i could connect my MBP to benq projector successfully and for  all other displays( Monitors). but when i connect it to optoma projector, MBP detects the display as OPTOMA XGA but nothing on bigger screen. i tried changing the resolution and refresh rate also but no changes.
    In my office we got benq projectors , for that it is working very well.(plug and play).
    and also i want to say that there is no problem with the optoma projector seems, because all other windows laptops are working well with that.
    i was struggling with this since one month. i googled it could not find anything supportive for my problem. please help me regarding this. i am new to apple. i hope there must be genius around here.
    thnak you

    Rwogera wrote:
    I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
    I need to know which MacBook Pro you have.  Only mid-2010  and later MBP's transmit sound through MiniDisplay Port to HDMI.  I have no information about the Mac Pro, so you might want to go to that Forum and ask there.

  • Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
    I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
    Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

  • How to watch iTunes rental movie on HDTV and keep MBP display off

    I would like to watch a movie on my flat screen TV. I rented the movie from the iTunes movie store, and I am attaching my MBP to the TV via the HDMI port on the TV and the sound cable to the RCA jacks.
    My understanding is that I have to use the F7 key to switch to mirror the display, but then I would like to make the MBP screen go black.
    I plan to try to watch using the front row feature and the MBP remote.
    Can this be done, and if so, how?
    Thanks,
    Boris

    My desktop was stolen a few weeks ago and I am left with this brand new hp thing.When I put itunes on and try to watch a movie or tv show I get a loud humming and after a while I can't take it anymore I turn it all off.I had actually given up and was ready to trade my ipad,ipods,and,itunes to anyone who can give me my movies and shows so I can actually watch them.Nero will stream my songs but not video and my ps3 will not see my istuff when I plug it in. Sony has gotten to be the same thing if I go anywhere on a trip I need to take a sony phone to play playstation store movies and an ipod or ipad to watch itunes stuff.
    Is there any other way to see stuff I own? If so please tell me because it seems that I have more trouble watching stuff I own than the pirates on the internet and I would think that google is where I should be going because it will play anywhere on about anything.I hope I am just a dumb old man who doesn't know how to work this stuff and someone can tell me what I can do so I can watch my movies I paid for. any help would be great.
    Thanks,
    Chris

  • Service Manager Portal not displaying VM console and related details

    Hi All,
    We have deployed private cloud with system center products using Cloud Services Process Pack and we have deployed Service Manger portal for VM provisioning in Cloud
    The Service Manger portal does not display VM console and VM details
    I have following queries
    How to take remote console of VM deployed by end user through service manager portal
    How will user come to know quota limit utilized in cloud under his account
    The VM are deployed through SCSM portal are in shutdown state how to auto start the VM after provisioning
    Please help since we are not able to find any solution for the above
    Appreciate if any workaround is available for the same
    Thanks
    Manzoor Ahmed

    The component of System Center that is capable to give console access to your VMs, is App Controller.
    Once the user are logged in here, they should see their quota, limits and resources available.
    Yes, the VMs are powered off by default when using the CSPP. You can edit the runbooks and add a task that will start them after provisioning.
    For your information:
    Many things has changed since the release of Cloud Service Process Pack. A new set of tools are provided with Windows Azure Pack to have a streamlined Infrastructure as a Service offering within the enterprise. Windows Azure Pack will leverage VMM (in the
    same way as SCSM does) but in conjunction with SPF (component within Orchestrator) to give you a framework that is identical to Windows Azure (Microsoft's own cloud) running on-premise.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

    I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
    The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
    Any suggestions?

    Dear all,
    (THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
    I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
    RUN A FULL BACK UP BEFORE DOING ANY OF THIS
    1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
    2. Connect your iPhone 4S to iTunes.
    3. Once connected, two options will show: ‘restore’ and ‘check for update’.
    4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
    5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’  (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
    A full back up is recommended before firmware upgrade.
    HOPE THIS HELPS

  • No Customer Service and lack of product display

    Today I made the trip to our local best buy in Lexington Park(California), Maryland where we have bought all of our tv's and electronics.  We have decided to get a new 70 in led tv for our living room.  My wife and I were very disappointed in the displays at the store. They didn't have any tv's on display that were bigger then 60 in.  We waited over 20 mins for a sales person to come over and ask us if we needed any help which never happened.  It was around 10:30am on a Monday morning so the store definitely wasn't busy, it is a small store and we noticed there was only one other couple in there at the time(which also no one walked over to them to ask if they needed help).  I saw 4 workers just standing around on the floor talking, there were 2 at the door as "greeters" who weren't doing anything.  So after their poor customer service and lack of displays I will never buy a tv from Best Buy again.  Also it doesn't say much when we went to WalMart and found multiple 70 in tv's on display & in stock which were cheaper than Best Buy online and in store, which is saying a lot because our local WalMart NEVER stocks anything.  I thought Best Buy was an electronics store? 

    Hello Drumm42,
    Thank your for taking the time to write to us! It is ever our goal to ensure that you get the help you need when you visit one of our stores. I regret that our representatives at the Lexington Park store didn't take that aspiration to heart when you visited recently. I know that I would be -- and have been on some occasions -- frustrated by such neglect.
    Considering that you weren't able to find a selection of TVs in the size you were hoping to purchase -- and the lack of attention from the store's staff -- it sounds like your overall experience was far less than ideal. I realize that you weren't approached while in the Home Theater department, but did you speak to a representative or manager about your experience?
    John|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Is there a way to connect 1 external thunderbolt display and 1 external HDMI display to a mid 2012 MBP (non-retina display)?

    I've had a 24" Asus HDMI montitor for a while, and just got a 27" Apple thunderbolt display. I was wondering if there was a way to connect both of these to my mid-2012 Macbook Pro (non-retina). I know you can daisy-chain 2 thunderbolt displays, so I tried plugging my Asus into the thunderbolt display (using an HDMI to mini-display port adapter) and it didn't work. Suggestions??

    Mini DisplayPort displays and adapters don't work directly with a Thunderbolt display, but will if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort device.

  • 15" MBP display scrambles (with and without 2nd mnitor)

    my macbook display goes berserk within a few minutes of turning it on. the display literally scrambles and looks like white noise, like an old black and white movie that's fallen off the reel. it looks like this:
    this problem happens every time, within 20 minutes of restarting the computer (which gets rid of the problem) when my MB is hooked up to a another monitor. there is no rhyme or reason for the scrambling, and i'm not doing the same action every time. interestingly, while the display on the macbook is scrambled, the computer works, and the second monitor remains clear.
    when my MB is on its own, the display scrambling occurs infrequently (once every couple of days, more so lately) but requires a restart to "fix" it.
    HELP! i keep losing files and having to reboot by holding down the power button as i can't see program windows to properly close them...

    so i just called my macbook dealer and they said it was proabably a faulty logic board. my warranty is expired and it's a $1000 fix. is there a way to get a logicboard used? i'm so crushed by this fault that showed up AFTER my warranty expired. i can't afford to fix this and the only alterntive seems to be to buy a new macbook...apple, you are SUCKING right now!

  • Apple Customer Service and warranty exceptions

    Hello all,
    Whilst I love my Apple hardware and software, and have had many good experiences with them over the years, unfortunately I post today with a complaint about what I perceive to be poor customer service and product quality.
    In late March/early April of 2006, I purchased a 1.83GHz MacBook Pro with great anticipation- Intel inside, Tiger OS, inbuilt webcam, and general awesomeness all round. I also purchased the 3 year AppleCare warranty, which was to be a godsend as during the following three years I would experience:
    *The replacement of the battery under the original MacBook Pro battery exchange program
    *The left fan on the unit dying in 2007
    *The logic board itself dying in late Feb/Early March 2008, thus bricking my laptop
    *Another battery replacement as the replacement for the original died before it (realistically) should have (Apple very nicely made an exception to the battery's 1 year technical warranty and replaced it for me).
    Fair enough, it's a new unit and was bound to have some problems. Unfortunately, last week the logic board died AGAIN; a mere 18 months after it was replaced in 2008. The unit is out of AppleCare warranty by 5 months or so, but I was urged by forumites and friends to call Apple, who would surely make an exception for me and pay for the replacement part, given my service history with the laptop and Apple's reputation for excellent customer service.
    Unfortunately, this has proved to not be the case. Calling customer service at Apple Australia I talked to Steven, who was firm to the point of rudeness when he stated that my laptop was out of warranty and Apple would cover nothing but the labour charges involved, as a "guesture of good will". When stretched, he offered me a $125 voucher if I wanted to purchase anything over $400 in the Apple store, and stressed he didn't have to do this but the company was attempting to provide good service to its customer.
    Despite my argument that I forked out over $3000 for this laptop a mere three years ago and am now looking at over $1000 to repair something replaced only 18 months ago, his line was that Apple provided a warranty and that was simply that (apart from a month or two grace). Five months is apparently "far outside the warranty period".
    I received no challenge to my assertion that after buying something which cost over $3000, it was reasonable for Apple to expect a consumer to pay an extra $1000 every year after the warranty finishes to replace a broken logic board. In truth, I find this near incomprehensible, considering one can buy the supposedly inferior build quality of a Dell, HP, Toshiba, etc and see it last not just beyond the warranty but another two or three years before it finally suffers something terminal.
    While from a warranty perspective Apple are well and truly within their rights to refuse to pay for the part, at the end of the day I am left to pay $1000+ for a repair for something which may only last another 12 months, plus $3500+ for a new Macbook Pro with AppleCare if I want a replacement- minus of course the $125 they are offering.
    I did some reading of the ACCC's website about my statutory rights and the Trade Practices act, and I note the following with interest:
    *Statutory conditions (goods)*
    The Trade Practices Act implies the following statutory conditions into consumer contracts:
    * The goods must be of merchantable quality. That is, they must meet a basic level of quality and performance, taking into account their price and description. They also should be free from defects that were not obvious to you at the time of purchase.
    * The goods must be fit for their purpose. That is, they should do what they are supposed to do and be suitable for any purpose that you might have made known to the supplier.
    * The goods must match the description you were given or the sample you chose from. For example, any carpet laid must be the same quality and colour as the sample you chose from.
    * You must receive clear title to the goods, including goods bought at auction. In other words, you can expect to own the goods outright and any restriction on ownership should be explained to you beforehand.
    While I don't particularly want to make a big deal of things, I hardly see $3000+ for three years use and $1000 each year thereafter to be merchantible quality or fit-for-purpose! This is supposed to be a high end laptop with excellent build quality, and yet I've a secondhand iBook that has been chugging for longer without issue than this machine!
    I told Steven from Customer Service that his offer didn't satisfy me in the slightest, and still put me in an awkward position with regards to repair and repurchase. He simply wouldn't budge, and refused to see things from my point of view (which another operator, Anu, was able to do and thus produce a much better response from myself). I have since asked to speak to his manager which- after initial resistance- I have been able to secure a future callback from. I have no idea how well discussions with he/she will go.
    What I'd like to hear from you guys and girls is your experience with similar situations, and whether you think I've a leg to stand on with regards my replacement request or the ACCC stuff above. Again, I love my Apple products but I hardly think asking them to replace the part while I pay for labour is a big ask, given the service history and my desire to continue buying and using their products.
    Love to hear your points of view on this one; thanks for taking the time to read it!
    Cheers,
    Dave.

    Dear meacod
    I have live the same, except that I Cure my MBP before it goes to die.
    A lot of older participants here just talk about Aplle care, which seem the automatic thing in front of a lack of real good quality on Apple products .
    But I think we pay the price, and my second hand MBP was much more expensive than a brand new PC with more ram, more Hard disk, and even a blue ray...
    I don't know your mbp history, but that's sure that we are not equal, in world, with Apple customer support. France is not so great, I don't know for your country.
    The only thing I think is that Apple should take care of us, as we have some unacceptable issues, for An Apple Product...
    Since 1996, when Apple was almost dead, saved by Bill Gates investment !!! , I have every year promote it, and it was not easy, but I have bring to Apple between 3 to 10 customers each year..
    since One year, I have stop that, because I don't believe anymore in Apple product's superiority .
    Oh, yes, on the paper, it's better, the system is really good. But the overall experiment can be so bad that I don't want to loose friends, or customers...
    I don't say it's always bad : I just say that it CAN BE SO BAD and that Apple DON'T take care of that...
    so, for your computer, open it, check it a lot, may be it's too late, but for instance, you talked about a fan, I have solved that case just by putting oil on the fan's axe...
    good luck

  • Bi Dashboards issue works properly some times and after not display pointers data and give un expected error and throw login window

    HI,
    I have toff situation where  we deployed bi dashboards in our site and it works some time and some times not,
    and some times it keep loading and throw a login window.
    works when
    we restart performance point service  and if not work
    we re create secure store service and generated new key and create new pps service application
    before that we stopped secure store and pps service  using c.a in application server
    we are using ssas for datasource to connect  from dashboard designer
    we have seperate server for ssas dbs
    seperate application server running: pps service and secure store service
    two web front ends:  one of running secure store
    1 Domain controller + central admin service running
    some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
    also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
    we tried every thin icreased server time out values  in ssas server
    :\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
    and in 
    c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
    maxStringContentLength="2147483647"
    maxNameTableCharCount="2147483647"
    maxBytesPerRead="2147483647"
    maxArrayLength="2147483647"
    maxDepth="2147483647" />
    even we have same issue
    is some thing happening when dashboards working some time and  after some time not 
    is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why 
    below are the logs
    Here are the results of the log analysis :
    server wfe1 
    09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller.  This may indicate the HttpRuntime executionTimeout for the Web Application
    is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
    09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical ‏‏حدث
    استثناء
    أثناء عرض
    عنصر ويب.
    قد تساعد
    معلومات التشخيص
    التالية في
    تحديد سبب
    هذه المشكلة:  Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
    انتهت
    مهلة الطلب
    أو تم
    إجهاضها. تم
    تسجيل تفاصيل
    إضافية من
    أجل المسؤول.  ‏‏رمز
    خطأ "خدمات PerformancePoint"
    هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
    09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.    
    at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)     at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()     at System.Web.HttpResponse.Flush(Boolean finalFlush)    
    at System.Web.HttpResponse.End()     at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
    09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
    the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases.  Additional Data:  Current default
    super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
    09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
    http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000  Verify that the location exists and that the user has the "Read Items" permission. 
    Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
    انتهت
    مهلة الطلب
    أو تم
    إجهاضها. تم
    تسجيل تفاصيل
    إضافية من
    أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)    
    at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
    spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
    09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
    http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000  Verify that the location exists and that the user has the "Read Items" permission. 
    Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
    انتهت
    مهلة الطلب
    أو تم
    إجهاضها. تم
    تسجيل تفاصيل
    إضافية من
    أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)    
    at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
    spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
    09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
    http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000  Verify that the location exists and that the user has the "Read Items" permission. 
    Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
    انتهت
    مهلة الطلب
    أو تم
    إجهاضها. تم
    تسجيل تفاصيل
    إضافية من
    أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)    
    at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
    spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
    09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
    http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000  Verify that the location exists and that the user has the "Read Items" permission. 
    Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
    انتهت
    مهلة الطلب
    أو تم
    إجهاضها. تم
    تسجيل تفاصيل
    إضافية من
    أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)    
    at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
    spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
    server wfe 2
    09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
    the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases.  Additional Data:  Current default
    super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
    09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
    the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases.  Additional Data:  Current default
    super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
    09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
    the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases.  Additional Data:  Current default
    super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
    09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
    the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases.  Additional Data:  Current default
    super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
    In the Roiscan logs we get an error in regards to the English Language pack:
    Review Items
    ============
    Error:                       Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack:  has unexpected
    file state(s).
    adil

    chinnijagadeesh,
    You suck!
    Signed: The rest of the universe.
    ... and quit crossposting FFS... it really is quite annoying!

  • How to connect 2 24" Cinema Displays to a non Thunderbolt MBP

    Hi I have a 2010 15" MBP and two 24" Apple Cinema Displays.  I recently purchased a Matrox DualHead2Go Digital ME graphics expander thinking I could connect the two displays to it.  However, the displays have mini displayport connectors and the Matrox is expecting DVI-D connectors.  It seems that Matrox do not have a female mini displayport to male DVI adaptor so I am stuck.
    Has anyone found a way of connecting two 24" Apple Cinema Displays to a non Thunderbolt MBP?
    Thanks in advance
    Neville

    Just got the DualHead2Go DP edition. Problem is, I need a MiniDP (female) to DP (male) adapter to connect my two Apple 24" LED displays to it... and I can't find one anywhere? basically the DualHead2go only has DP inputs. All of my devices (24" LED displays and 17" MBP) are MiniDP.
    Anyone have any ideas?
    Shane

  • Web service and servlets in the same project...web.xml?

    Hello, I have a problem with my web service.
    I have a server, which displays a web service. I programmed this service with JAXRPC.
    I have a client, in another directory. I succeded in compiling, deploying and running the web service.
    The problem is that after I tried to integrate this service in an existing project. This project contains servlets. In these servlets, I'm using sessions.
    These servlets are on the same side as the server of the web service. Because of the implementation of my code, I'd like to use in the class that represents the server of the service, the same session as the one I'm using in the servlets.
    But of course, it's not working by itself. I know there's something to do with the web.xml files.
    The thing is that I created a web.xml file for the service, and another for the servlets.
    I was thinking of joining both of them in one xml file, but everything crashes then...
    Could someone tell me how to create a project with a web service and servlets, and mostly how to configure the xml file??
    Thanks for any help
    Philippe

    Hello, I have a problem with my web service.
    I have a server, which displays a web service. I programmed this service with JAXRPC.
    I have a client, in another directory. I succeded in compiling, deploying and running the web service.
    The problem is that after I tried to integrate this service in an existing project. This project contains servlets. In these servlets, I'm using sessions.
    These servlets are on the same side as the server of the web service. Because of the implementation of my code, I'd like to use in the class that represents the server of the service, the same session as the one I'm using in the servlets.
    But of course, it's not working by itself. I know there's something to do with the web.xml files.
    The thing is that I created a web.xml file for the service, and another for the servlets.
    I was thinking of joining both of them in one xml file, but everything crashes then...
    Could someone tell me how to create a project with a web service and servlets, and mostly how to configure the xml file??
    Thanks for any help
    Philippe

Maybe you are looking for