A dynamic "future" date stamp
Hello folks,
I am looking to insert a future date automatically in a dynamic stamp. That is, I would like to be able to have the stamp automatically add X days to the current date. I have seen a lot of JavaScript forums, tried many of the proposed solutions, but have yet to find something that works for my dynamic stamp. Currently my stamp looks like this:
event.value = (new Date()).toString();
AFDate_FormatEx("mmmm d, yyyy");
Amy help would be greatly appreciated. Thanks!
Thanks for the suggestion. I gave this a shot, and it simply displays today's date:
Similar Messages
-
Time-Date Stamp anywhere in Apple's future?
Does anyone know, if Apple plans to include any kind of Time-DateStamp with up-coming phones?
I'm talking about Native, On-Board, Manual capabilities. I'm still enjoying my 4S..but really detest the 3rdParty Apps
designed for this purpose.hrrogersjr wrote:
Does anyone know, if Apple plans to include any kind of Time-DateStamp with up-coming phones?
Apple has not stated what their plans are.
Time-Date stamp for what? Do you mean Photos? You want the Time/Date put onto the photo itself?
All app data has a time/date (and in some cases, where) it was created.
To see the time for Messages, open the message thread and pull the messages to the left.
Suggestions here -> http://www.apple.com/feedback/ -
RE: Dynamically mapping data to widgets
One quick and dirty solution would be something like this (though not
terribly efficient):
newPanel : Panel;
newPanel = <panelCreatedFromWindowWorkshop>.Clone(deep = TRUE);for childWidget in newPanel.children do
-- check if the childWidget field name matches field name to be
set
if childWidget.name.isEqual(source=<..FieldNameToSet..>,
ignoreCase=TRUE) then
dataWidget : dataField = dataField(childWidget);
if dataWidget.textvalue = NIL then
dataWidget.textvalue = new;
end if;
-- set the textvalue of the childWidget to required
value
dataWidget.textvalue.setvalue('WORKS !');
end if;
end for;
Your problem would have been directly solved if the Forte library class
CompoundField provided a SetDataObject( ) method corresponding to the
GetDataObject( ) method.
According to Forte Help - "The GetDataObject method returns the object
that the compound field is mapped to. If the compound field is not
mapped to an object, this method returns NIL."
Maybe Forte could consider providing this in a future release.
Another option would have been to use the GetFieldByName( ) method on
the newly created panel to get at the child widgets directly.
According to Forte help - "GetFieldByName is designed for use in dynamic
applications. For example, you can use GetFieldByName to retrieve the
names of dynamically created fields for immediate use in dynamic
applications."
This works fine for compile-time named widgets, but I couldn't get it to
work for the newPanel child widgets using the code below, or maybe I am
missing something here.
newPanel : Panel;
newPanel = <panelCreatedFromWindowWorkshop>.Clone(deep = TRUE);newPanel.name.setvalue('newPanel');
newPanel.parent = <aGridField>;
dataWidget : dataField = dataField(newPanel.getFieldByName('age'));
(OR)
dataWidget : dataField =
dataField(<aGridField>.getFieldByName('newPanel.age'));
(OR)
dataWidget : dataField =
dataField(self.window.getFieldByName('newPanel.age'));
In all cases the return value was NIL.
Maybe someone from Forte could shed more light on this.
Hope this helps.
Prashant.
From: Richard Finegan[SMTP:[email protected]]
Reply To: Richard Finegan
Sent: Thursday, August 13, 1998 2:27 PM
To: 'Forte Users Mailing List'
Subject: Dynamically mapping data to widgets
Here's what I'm trying to do:
I have a panel with a bunch of data fields that I've mapped to an
object.
I want to replicate the panel several times to programmatically
populate a
TabFolder (although the TabFolder bit isn't really relevant here, I
think).
But I can't figure out how to get at the mapped data in the replicas
of my
object...
newPanel : Panel;
newPanel = <panelCreatedFromWindowWorkshop>.Clone(deep = TRUE);
panelCreatedFromWindowWorkshop.anAttributeOfObjMappedToPanel =
something;
// tada! "something" appears in a data field of the original panel
newPanel.? = something; // how to do the same thing with the new
panel?
How do I map an object to the replicated panel? I've experimented
with
assigning "Widget.AppData" to a new object, but I can't seem to get it
to
do anything...
Thanks in advance for your help.
Richard Finegan
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi Michael,
did you find any solution?
I've the same problem. -
Hi,
In a proxy to file(receiver file adapter) scenario, is there any way to append date in a specific format(ddmmyyyy) at the end of the file name.
ex: sample23122009
Add time stamp adds the date in a different format.
If if is possible thru Receiver file adapter operating system command.
Please suggest me how to do that.
thanks.
sriHello Arunsri,
Try to use dynamic file name configuration option in receiver file adapter channel. In mapping just concatenate the date stamp as required with your filename.Take this as constant.
For this you may modify u r target structure. Add one more node as
FileName -- Node
-FileName -- Field
In content conversion use that
FileName.fieldFixedLengths - 0(Zero)
FileName.fixedLengthTooShortHandling -- Cut. So that the extra field would not appear in file.
Hopt it will helps.
Cheers
Veera -
Clearing an alert in OEM-GC that has a future date on, How do you delete?
Hi to all,
I have an alert that occurred regarding the count on targets on the agent and it has a future time stamp on it. I have tried to alter the alert metric so it en-compasses the amount of targets hoping that this would clear the alert and then when it had cleared reset the metric to it's original quota.
Does anyone know how to delete such alerts?
Thanks to all that can help.Try the solution
1. Make a SELECT * from MGMT_CURRENT_SEVERITY and get the TARGET_GUID, METRIC_GUID and KEY_VALUE.
2 login as sysman to repository database
exec EM_SEVERITY.delete_current_severity(TARGET_GUID,METRIC_GUID,KEY_VALUE);
for example:
exec EM_SEVERITY.delete_current_severity('0DEB8E6980695B7548CF98871084AD10','F95BA0D95585002889E1ABF92B2DA7C3','SYS');
Regards
Click here for step by step inst to [Transportable tablespace export and import|http://www.oracleracexpert.com/2009/09/transportable-tablespace-export-and.html]
Click here to learn [Oracle data pump export/import with examples.|http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html]
Click here to learn [Data Pump Export modes and interfaces|http://www.oracleracexpert.com/2009/08/data-pump-export-modes-and-interfaces.html]
http://www.oracleracexpert.com -
Expense reports are not processing for future date?
hi folks,
in our co.expense reports are not processing for future date, even though the end date is one month from now the expense reports are not getting paid.
can anybody assist me to come out of this issue.
thanks in advance,
regards
bhanuHI,
Could you please share how to go Debug mode in Dymanic program, I have scenarion in SAP HR , when Employee is hire , during the hiring action Infotype 32 is updating based on following conditions
********INSERT IT0032 FOR CANDIDATE ID *************
P0001-PERSG<>'5' - True
P0000-MASSN='01'/X
P0000-MASSN='H1'/X
P0000-MASSN<>'84'/X
P0000-MASSN<>'86'/X
P0000-MASSN<>'99'/X
GET_PNALT(ZHR_CREATEP0032)
RP50D-FIELDS <> ''
INS,0032,,,(P0000-BEGDA),(P0000-ENDDA)/D
P0032-PNALT=RP50D-FIELD1
P0032-ZZ_COMPID='05' _ True
Infotype record is being created but there is no data in "RP50D-FIELD1 , so i tried to debug the subroutine GET_PNALT(ZHR_CREATEP0032) as mention in Dynamic action, its not going in debugger mode.
Do you have any Idea about how to debug the program. used in dynamic action
Regards,
Madhu -
Removing date stamps from photos
Hi,
Can anyone please advise if there is a quick and easy way to remove the date stamp from photos. My brother has a heap of great landscape shots he's taken over the years, however he has always had the date stamp set on his old camera - he knows better now and won't use it in the future. How do can he improve the quality of the photos he already has by removing the date?
CheersUse the magic extractor tool.
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using/WS083AC514-D907-483b-84A1-4EA3 989C4C65_WIN.html
But you need to do the same for each of your single image.
No way to do for all in one go except for resizing the images in one go via File->Process Multiple Files to that much size which can remove date stamps.
-Garry -
LR/Mogrify Date stamping issue
I have been using LR Mogrify to date stamp upon export for months now with great success. Unfortunately after a system failure I need to reinstall all of my programs. I have re-installed LR3, Image Magick and LR Mogrify 2. And now upon export, all I see is a faint attempt at a date stamp, and sometimes even two faint attemps on the same picture. See attached. Also, I am illustrating my setting. Any thoughts why this may be ocurring? Thanks!
Your problem is that you are using a version of LabVIEW (7.4) that does not exist!
It's hard to say what the problem is without seeing your code. If you are using DAQmx to read the thermocouples, then there is a timestamp that is part of the dynamic or waveform data type that is returned. Assuming that you are using the Write to Measurement File, you should have no problems. Post what you have written. -
Hi,
I know Keynote does not have the ability to date stamp its slides. However, if you wish to do this, simply insert a table and place a custom function within a cell. The function to use is =TODAY() This auto-updates as the date changes. Hopefully, Apple will make it easier in the future to do this.You can delete the duplicate records (except the latest date one) coming from the datasource in the start routine of the transformation.
sort source_package by division attr1 attr2 ascending valid_date descending.
delete adjacent duplicates from source_package comparing division attr1 attr2.
You need to replace the actual field names in the code above. Also, if your data is coming in multiple packages, there could be a case of inconsistency. -
AD date stamp OR File date stamp?
Hi,
Im in the process of evalutating software to archive files to cheaper storage based on size and date stamp.
Problem, we unfortunately migrated from eDir to AD 2.5 years ago and products used thus far use the AD date stamp from when we migrated which is not useful.
My question is, does storage manager archive base on the date stamp of the file?
I know we have files that havn't been modified for more than 10 years.
Is there a way around this?
Thanks
AlbertNot using anything at the moment.....basically looking fo something that will do the job.
Will look at dynamic files serveices.
thanks :-)
Originally Posted by jmarton
asabadin wrote:
> Im in the process of evalutating software to archive files to cheaper
> storage based on size and date stamp.
>
> Problem, we unfortunately migrated from eDir to AD 2.5 years ago and
> products used thus far use the AD date stamp from when we migrated
> which is not useful.
>
> My question is, does storage manager archive base on the date stamp of
> the file?
>
> I know we have files that havn't been modified for more than 10 years.
>
> Is there a way around this?
How are you archiving files? Are you using a grooming rule? If so,
you can specify a filter based on create/modify/access time. This may
help for archiving files to the vault via grooming. However, to be
honest if you're wanting to archive files to cheaper storage then a
better option is Novell Dynamic File Services for Windows.
https://www.novell.com/products/dynamic-file-services/
This gives you the option of moving files to cheaper storage but still
being accessible "online" by your users, or truly archiving them to
cheaper storage (or even the cloud) and only archive managers have
access to files. It's been a while since I last looked at NDFS but I
believe you can configure policies there as well based on
create/modify/access time.
Your world is on the move. http://www.novell.com/mobility/
Supercharge your IT knowledge. http://www.novell.com/techtalks/ -
Does any one know if the iPhone camera one day will have the ability to date stamp photos taken with the iPhone
No one but Apple knows what will come in the future until they announce it. We are forbidden from speculating about it on these forums.
-
Provisioning a user in future date
Hello,
Creating a new user and provisioned to OID work properly.
Now I would like to create a user with start date in the future. OIM when the value USR_START_DATE is on the future it update the USR_PROVISIONING_DATE too on the same future date but not execute the provisioning to OID and the USR_STATUS is "Disabled Until Start Date"
If there any way to update the USR_START_DATE with a different USR_PROVISIONING_DATE and do the provioning as normal and keep USR_STATUS as Active.
thanks
TG
Edited by: TG on 1-Nov-2010 9:48 AMHello again,
i'm using the Thor.API.Operations.tcUserOperationsIntf.createUser((java.util.Map arg0).
arg0 will contain USR_PROVISIONING_DATE=today date and USR_START_DATE = to the future date.
I apply what your propose and push the USR_PROVISIONING_DATE=today date and put it on the pre-insert in Users form.
sorry it did not work, it change the value in USR_PROVISIONING_DATE to put the USR_START_DATE value and didn't provisioned
thanks
TG
Edited by: TG on 1-Nov-2010 10:47 AM -
Dynamically Set date not changing in schedule Job
Hi,
I have created a report with "Order Date" as one of the parameters on the selection screen. I have created a variant, say 'X' , to set this date parameter dynamiccaly as "Current date - 31 days".
I have scheduled this program to run in background with the 'X' variant daily at certain time.
Now, for the day on which I created this job , the Order Date is set to correct date . For ex if I am scheduling the job tdy it will be set to 06/10/08. However, for next day , that is tom this date is not getting changed. i.e Tommorrow again Order date is 06/10/08 but it should have been 07/10/08.
So basically this dynamically set date is not chaning in the scheduled job.
Any idea why this is happening and what is the corrective measure for this.
Thanks!There is an INITIALIZATION event in the program.......
Do the processing your date in that event only....
for ex....
select-options: date for order-date.
INITIALIZATION.
date-low = sy-datum or wat ever.
Thanks
Saurabh -
Purchase order error with future date
Hi,
Here one scenario like
We have created a sales order VA01-->Pur. Order ME21N with current date i.e., 05.09.2008. System able to post perfectly and post MIRO, cutomer invoice and finally released to accounting.
Now, same sales order VA01-->Pur. Order ME21N with future date i.e., 05.09.2009. System threws error message "Account requires an assignment to a cost object".
Here my question is, why system is asking this assignment if i gave future date(05.09.2009) and why system is not asking if i gave current date(05.09.2008) ? remaining all are same except date
Looking forward your comments/thoughts
thansk
anifiHi,
Thanks for your reply
regards
Edited by: Anifi on Sep 22, 2008 6:18 AM
Edited by: Anifi on Sep 29, 2008 2:05 PM -
How to disable the future dates in Date pick calendar - SQL Server Reporting Services
Hi All,
I have a scenario to run the report only for the Past days, and i have datepick calendar as a parameter for selecting Start Date and End Date. I want to control the Users by not to select the Future Dates in the End Date. In Other Words, the user should not select beyond the Current Date,
Is there any way for me to control it. Advance Thanks
Regards,
Sundarrajan.Hi
Here is a solution for ur problem: put the below code in the script, and the add
OnClientDateSelectionChanged="checkDate"
in the calenderExtender... u ll get the answer nicely.. Happy coding..
<script type="text/javascript">
function checkDate(sender,args){
alert("You cannot select a day greater than today!")
sender._selectedDate = new Date();
sender._textbox.set_Value(sender.selectedDate.format(sender._format))
}</script>
Maybe you are looking for
-
Can't get Airport Extreme to connect to Internet
I have a D-Link 320T ethernet modem. This works fine connected straight into my Mac, but as soon as its connected to the Airport I loose my internet connection. Its seems to be something to do with my setup, but I'm clueless as to what. My airport se
-
Discount for online number available?
Hello, I am thinking about purchasing a Skype online number for my UK business. At the moment, it says on Skypes website that there is a 50% discount for existing subscribers. I think this does not apply to me because this would be my first online nu
-
What are pin names and numbers rotated?
I copied an existing schematic symbol into my user data base, changed the part number and saved it. Then I placed the component into the schematic and the pin names and numbers were totally screwed up. All vertical names and numbers were rotated hori
-
ITunes 11.4 (and iOS 8.0) will not download
I am running Windows 7, Norton 360, and get my internet service from Verizon FIOS. I have been completely unable to download the iTunes 11.4 update that recently came out. If I try and update iTunes through the help menu in iTunes, the entire program
-
Has anyone had a DPS Newsstand app rejected because magazine is biannual?
Rejection from Apple is telling me magazine must be updated at least quarterly to be distributed through Newsstand, but I subscribe to multiple otehr biannual magazines through Newsstand. Is this a new rule, or is there a workaround?