A friend just texted me and said that my computer has a virus because it is sending emails.She told me to change my passwords on my email act. (which I did) and on m Facebook acct. which I did. She said that I should run a virus scan on my computer.

I have a Macbook Air. How do I check to see if I have a virus.

The following from the User Tips section of the forum has some good advice: Viruses, Trojans, Malware - and other aspects of Internet Security
I don't know if it is discussed in there, but every case recently where I have been receiving spam emails from friends of mine has been due to the password on their email account being hacked rather than from any malware on their Mac or PC computer.

Similar Messages

How do i enable my Itunes account? When i try to purchase or update it says "Your Apple ID has been disable." I have contacted Apple 3 times and they told me to change my password each time and i told them i tried that, but it didn't work.They didn't help

When i try to purchase or update it says "Your Apple ID has been disabled." I have contacted Apple 3 times and they told me to change my password each time and i told them i tried that, but it didn't work.They said they would try to fix it and they never contacted me after that. I have an ipod touch 2nd generation.

What did itunes support tell you?
If you did everything it says then you contacted them.
From the article you linked:
If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance."

When I send emails they are including a link to my facebook account which I don't want.

When I send emails they include a picture and a link to facebook. I can't get rid of it?

Check to make sure you do not have a signature attached to the account in question. If you do try removing it and seeing if that helps.
I don;t use FaceBook so I am not sure if this is a default behavior of having FaceBook enabled on the Mac. Hopefully someone who uses it will chime in.
regards
Message was edited by: Frank Caggiano

I changed my password on my aol account but it did not change on the SMTP server which is preventing me from answering email. Help

I changed my aol password but the SMTP server password did not change so I can't send mail. How can I change the SMTP password?

Go into Settings > Mail, Contacts, Calendars and select the account, then tap the account on the popup that you should get, and then tap on the SMTP server name

How to change a password for an OpenLDAP user, which fails when using Lion's System Preferences?

The Problem
Users are unable to change their password using System Preferences -> Users & Groups on a Mac that is connected to an LDAP server (specifically, OpenLDAP).
This error appears to be a result of OS X 10.7.4 now sending the username of the user rather than their full DN (e.g. it's sending bobsmith, notuid=bobsmith,ou=Users,dc=companyname,dc=com).
(a bug report for this issue has been filed with Apple and can be seen on OpenRader @http://openradar.appspot.com/11768796)
Steps to Reproduce:
Try to change the password using the System Preferences -> Users & Groups prefpane on Lion. It fails with the following error message:
The password for the account “bobsmith” was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.
Expected Results:
The password should be changed.
Actual Results:
The error appears, and on the LDAP server, an error like the following is logged:
Jun 28 08:42:21 ldap3 slapd[7810]: conn=10518785 op=2 RESULT oid= err=21 text=Invalid DN
This error appears to be a result of OS X 10.7.4 now sending the username of the user rather than their full DN (e.g. it's sending bobsmith, notuid=bobsmith,ou=Users,dc=companyname,dc=com)
Notes: This was encountered by someone else over at the AFP548.com forums who ended up patching their LDAP server to resolve the issue. This shouldn't require patching LDAP to resolve, however. Lion needs to (at least have an option to) send the full DN of a user requesting to change their password, not the short username:
Text from above forum link (in case it is taken down):
So, I’ve got this OpenLDAP server with network home directories at home that all of my Mac machines authenticate to. Everybody can bounce around to whatever Mac is available. It works great.
Anyway, with Snow Leopard, I was able to change user passwords via System Preferences. However, that got broken when I upgraded to Lion (amongst other things). Both Snow Leopard and Lion send exop’s to the ldap server, but for whatever reason, the id is screwed up in Lion (or at least, it’s screwed up on the two machines at home I tested this with). Instead of sending the user’s DN, e.g. “uid=user,cn=users,ou=something,dc=somewhere,dc=com”, the ldap server is only sent the uid, e.g. “user”. The ldap server is expecting a DN here, so naturally, it fails with the error “Invalid DN”.
Bummer.
So, to work around that, I had to patch OpenLDAP (version 2.4.26 in this case). Now, when my server can’t resolve the id it’s given during a password change, it will look at the bind DN, and if the id string is contained within the bind DN string, it will just use the bind DN as the entry to change. I figured this would still allow me to manually specify password changes via an admin account while still giving users the ability to change their own passwords without having to point them at a webpage (lame).
I should point out that all my accounts have the uid as part of the DN… I guess if you were doing some kind of crazy SASL mappings, this might not work for you…
Anyway, here’s the patch in case anyone else is interested… If it works for you, great. If not, oh well.
-- passwd.c 2011-06-30 11:13:36.000000000 -0400 +++ passwd.lion_compatability.c 2012-02-13 22:48:54.213214617 -0500 @@ -18,4 +18,5 @@ #include +#include #include @@ -59,4 +60,5 @@ int freenewpw = 0; struct berval dn = BER_BVNULL, ndn = BER_BVNULL; + ber_int_t err; assert( ber_bvcmp( &slap_EXOP_MODIFY_PASSWD, &op->ore_reqoid ) == 0 ); @@ -102,11 +104,8 @@ if ( !BER_BVISEMPTY( &id ) ) { - rs->sr_err = dnPrettyNormal( NULL, &id, &dn, &ndn, op->o_tmpmemctx ); - id.bv_val[id.bv_len] = idNul; - if ( rs->sr_err != LDAP_SUCCESS ) { - rs->sr_text = "Invalid DN"; - rc = rs->sr_err; - goto error_return; - } + err = dnPrettyNormal( NULL, &id, &dn, &ndn, op->o_tmpmemctx ); + } + + if ( !BER_BVISEMPTY( &id ) && (err == LDAP_SUCCESS) ) { op->o_req_dn = dn; op->o_req_ndn = ndn; @@ -116,4 +115,16 @@ ber_dupbv_x( &dn, &op->o_dn, op->o_tmpmemctx ); ber_dupbv_x( &ndn, &op->o_ndn, op->o_tmpmemctx ); + if ( !BER_BVISEMPTY( &id ) ) { + /* See if the id matches the bind dn */ + if ( strstr( dn.bv_val, id.bv_val ) == NULL ) + { + rs->sr_err = err; /* From dnPrettyNormal */ + rs->sr_text = "Invalid DN"; + rc = rs->sr_err; + goto error_return; + } + Statslog( LDAP_DEBUG_STATS, "%s Invalid id (%s) specified; using bind DN (%s)\n", + op->o_log_prefix, id.bv_val, dn.bv_val, 0, 0 ); + } op->o_req_dn = dn; op->o_req_ndn = ndn; @@ -123,4 +134,8 @@ } + if ( !BER_BVISEMPTY( &id ) ) { + id.bv_val[id.bv_len] = idNul; + } + if( op->o_bd == NULL ) { if ( qpw->rs_old.bv_val != NULL ) { "
UPDATE (still not working, though)
I tried to change my password with dscl too, like so:
$ dscl -u bobsmith -p /LDAPv3/ldap -passwd /Users/bobsmith
...and this generated the following after I input my current password and a new one:
Password: New Password: passwd: DS error: eNotYetImplemented DS Error: -14988 (eNotYetImplemented)
On my OpenLDAP server, it generated:
Jul 3 11:47:51 ldap slapd[7810]: conn=12282745 fd=1633 ACCEPT from IP=10.0.1.3:64485 (IP=0.0.0.0:636) Jul 3 11:47:51 ldap slapd[7810]: conn=12282745 fd=1633 closed (TLS negotiation failure) Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 fd=1633 ACCEPT from IP=10.0.1.3:64486 (IP=0.0.0.0:636) Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 fd=1633 TLS established tls_ssf=256 ssf=256 Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 op=0 SRCH base="" scope=0 deref=0 filter="(objectClass=*)" Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 op=0 SRCH attr=supportedSASLMechanisms defaultNamingContext namingContexts schemaNamingContext Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 op=0 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 op=1 BIND dn="uid=bobsmith,ou=Users,dc=mycompany,dc=com" method=128 Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 op=1 BIND dn="uid=bobsmith,ou=Users,dc=mycompany,dc=com" mech=SIMPLE ssf=0 Jul 3 11:47:51 ldap slapd[7810]: conn=12282746 op=1 RESULT tag=97 err=0 text= Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=2 SRCH base="ou=Users,dc=mycompany,dc=com" scope=2 deref=0 filter="(&(|(objectClass=posixAccount)(objectClass=inetOrgPerson)(objectClass=shadowAccount))(|(uid=bobsmith)(cn=bobsmith)))" Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=2 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=3 SRCH base="ou=Users,dc=mycompany,dc=com" scope=2 deref=0 filter="(&(|(objectClass=posixAccount)(objectClass=inetOrgPerson)(objectClass=shadowAccount))(|(uid=bobsmith)(cn=bobsmith)))" Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=3 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=4 SRCH base="ou=Users,dc=mycompany,dc=com" scope=2 deref=0 filter="(&(|(objectClass=posixAccount)(objectClass=inetOrgPerson)(objectClass=shadowAccount))(|(uid=bobsmith)(cn=bobsmith)))" Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=4 SRCH attr=objectClass apple-generateduid uid uidNumber userPassword cn Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=4 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=5 EXT oid=1.3.6.1.4.1.4203.1.11.1 Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=5 PASSMOD old Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=5 RESULT oid= err=53 text=old password value is empty Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 op=6 UNBIND Jul 3 11:47:56 ldap slapd[7810]: conn=12282746 fd=1633 closed
If I run the same dscl command from a Snow Leopard machine, it works without an error:
$ dscl -u bobsmith -p /LDAPv3/myldapserver.com -passwd /Users/bobsmith Password: New Password:
It generates these logs on the server
Jul 3 12:03:29 ldap slapd[7810]: conn=12293658 fd=1283 ACCEPT from IP=10.0.1.2:51013 (IP=0.0.0.0:636) Jul 3 12:03:29 ldap slapd[7810]: conn=12293658 fd=1283 TLS established tls_ssf=256 ssf=256 Jul 3 12:03:29 ldap slapd[7810]: conn=12293658 op=0 SRCH base="" scope=0 deref=0 filter="(objectClass=*)" Jul 3 12:03:29 ldap slapd[7810]: conn=12293658 op=0 SRCH attr=supportedSASLMechanisms namingContexts dnsHostName krbName Jul 3 12:03:29 ldap slapd[7810]: conn=12293658 op=0 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 12:03:29 ldap slapd[7810]: conn=12293658 op=1 UNBIND Jul 3 12:03:29 ldap slapd[7810]: conn=12293658 fd=1283 closed Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 fd=1283 ACCEPT from IP=10.0.1.2:51014 (IP=0.0.0.0:636) Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 fd=1283 TLS established tls_ssf=256 ssf=256 Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 op=0 SRCH base="" scope=0 deref=0 filter="(objectClass=*)" Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 op=0 SRCH attr=supportedSASLMechanisms namingContexts dnsHostName krbName Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 op=0 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 op=1 BIND dn="uid=bobsmith,ou=Users,dc=mycompany,dc=com" method=128 Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 op=1 BIND dn="uid=bobsmith,ou=Users,dc=mycompany,dc=com" mech=SIMPLE ssf=0 Jul 3 12:03:29 ldap slapd[7810]: conn=12293659 op=1 RESULT tag=97 err=0 text= Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=2 SRCH base="ou=Users,dc=mycompany,dc=com" scope=2 deref=0 filter="(&(|(objectClass=posixAccount)(objectClass=inetOrgPerson)(objectClass=shadowAccount))(|(uid=bobsmith)(cn=bobsmith)))" Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=2 SRCH attr=uid cn Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=2 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=3 SRCH base="ou=Users,dc=mycompany,dc=com" scope=2 deref=0 filter="(&(|(objectClass=posixAccount)(objectClass=inetOrgPerson)(objectClass=shadowAccount))(|(uid=bobsmith)(cn=bobsmith)))" Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=3 SRCH attr=uid cn Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=3 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=4 SRCH base="ou=Users,dc=mycompany,dc=com" scope=2 deref=0 filter="(&(|(objectClass=posixAccount)(objectClass=inetOrgPerson)(objectClass=shadowAccount))(|(uid=bobsmith)(cn=bobsmith)))" Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=4 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=5 EXT oid=1.3.6.1.4.1.4203.1.11.1 Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=5 PASSMOD id="uid=bobsmith,ou=Users,dc=mycompany,dc=com" new Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=5 RESULT oid= err=0 text= Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=6 SRCH base="ou=Users,dc=mycompany,dc=com" scope=2 deref=0 filter="(&(|(objectClass=posixAccount)(objectClass=inetOrgPerson)(objectClass=shadowAccount))(|(uid=bobsmith)(cn=bobsmith)))" Jul 3 12:03:31 ldap slapd[7810]: conn=12293659 op=6 SEARCH RESULT tag=101 err=0 nentries=1 text= Jul 3 12:03:32 ldap slapd[7810]: conn=12293659 op=7 UNBIND Jul 3 12:03:32 ldap slapd[7810]: conn=12293659 fd=1283 closed

Hi Koen,
I tried to test this, but for me its working sorry(!). Here are the details of what I did in case that helps you diagnose....
# add the 2 test users
ldapadd -h $my_ldaphost -p $my_ldapport -D $my_adminuid -w $my_adminpwd <<EOF
dn: cn=TEST_A, cn=Users, dc=myco,dc=com
sn: TEST_A
mail: [email protected]
objectclass: inetorgperson
objectclass: orcluser
objectclass: orcluserv2
objectclass: organizationalperson
objectclass: person
objectclass: top
uid: TEST_A
cn: TEST_A
dn: cn=TEST_B, cn=Users, dc=myco,dc=com
sn: TEST_B
mail: [email protected]
objectclass: inetorgperson
objectclass: orcluser
objectclass: orcluserv2
objectclass: organizationalperson
objectclass: person
objectclass: top
cn: TEST_B
uid: TEST_B
EOF
# reset the passwords
sqlplus /nolog <<EOF
conn orasso/${orclpasswordattribute}@${my_sid}
set serveroutput on
exec wwsso_oid_integration.reset_passwd(p_user => 'TEST_A', p_subscriber_nickname => null, p_newpwd => 'password1');
exec wwsso_oid_integration.reset_passwd(p_user => 'TEST_B', p_subscriber_nickname => null, p_newpwd => 'password1');
exit
EOF
[oracle@myhost bin]$ ldapbind -D cn=TEST_A,cn=Users,dc=myco,dc=com -w password1
bind successful
[oracle@myhost bin]$ ldapbind -D cn=TEST_B,cn=Users,dc=myco,dc=com -w password1
bind successful

I just installed Snow Leopard 10.6.3, everything seems fine except I can't send email (I can receive email)

I have installed Snow Leopard 10.6.3. I can receive email, why can't I send email?

If you are not using your normal internet connection it could be that you need to obtain the web address for the smtp server (handles outgoing mail) for the connection you are using. Many internet providers will not let you use their smtp server if your connection is not on their network.
Hope this helps,
Ray

GPP runs in System account even if specified that it should run i user context

The user 'xlsx' preference item in the 'USER-Microsoft-Office Group Policy object did not apply because it failed with error code '0x80070005 Access is denied.' This error was suppressed.
I have a problem with GPP that should make a program (Libreoffce or Microsoft office) the default opening option for certain file-types (.doc, xls, .ppt etc...)
But the GPP runs in system account even tho I have set the policy to "Run in user's security context"

Hi Martin,
Thank for your patiences!
Here is another log of a user that I'm certain that it is a failure on
2013-07-04 08:06:04.800 Entering ProcessGroupPolicyExFolderOptions()
2013-07-04 08:06:04.800 SOFTWARE\Policies\Microsoft\Windows\Group Policy\{A3F3E39B-5D83-4940-B954-28315B82F0A8}
2013-07-04 08:06:04.801 BackgroundPriorityLevel ( 0 )
2013-07-04 08:06:04.801 DisableRSoP ( 0 )
2013-07-04 08:06:04.801 LogLevel ( 2 )
2013-07-04 08:06:04.801 Command subsystem initialized. [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.818 Background priority set to 0 (Idle).
2013-07-04 08:06:04.819 ----- Parameters
2013-07-04 08:06:04.819 CSE GUID : {A3F3E39B-5D83-4940-B954-28315B82F0A8}
2013-07-04 08:06:04.819 Flags : (   ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
2013-07-04 08:06:04.819          ( X ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
2013-07-04 08:06:04.819          (   ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
2013-07-04 08:06:04.819          (   ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
2013-07-04 08:06:04.819          ( X ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
2013-07-04 08:06:04.819          (   ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
2013-07-04 08:06:04.819          (   ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the current policy.
2013-07-04 08:06:04.819          (   ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
2013-07-04 08:06:04.820          (   ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
2013-07-04 08:06:04.820          (   ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
2013-07-04 08:06:04.820 Abort Flag : Yes (0x003967d0)
2013-07-04 08:06:04.820 HKey Root : Yes (0x000015e0)
2013-07-04 08:06:04.820 Deleted GPO List : No
2013-07-04 08:06:04.820 Changed GPO List : Yes
2013-07-04 08:06:04.820 Asynchronous Processing : Yes
2013-07-04 08:06:04.820 Status Callback : No (0x00000000)
2013-07-04 08:06:04.821 WMI namespace : No (0x00000000)
2013-07-04 08:06:04.821 RSoP Status : Yes (0x068ced48)
2013-07-04 08:06:04.821 Planning Mode Site : (none)
2013-07-04 08:06:04.821 Computer Target : No (0x00000000)
2013-07-04 08:06:04.821 User Target : No (0x00000000)
2013-07-04 08:06:04.821 Calculated list relevance. [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.822 ----- Changed - 0
2013-07-04 08:06:04.822 Options : (   ) GPO_FLAG_DISABLE - This GPO is disabled.
2013-07-04 08:06:04.822            (   ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2013-07-04 08:06:04.822 Options (raw) : 0x00000000
2013-07-04 08:06:04.822 Version : 2293795 (0x00230023)
2013-07-04 08:06:04.822 GPC : LDAP://CN=User,cn={A357D87E-6F4D-4762-9F9A-6B5D3BE436F7},cn=policies,cn=system,DC=domain,DC=net
2013-07-04 08:06:04.822 GPT : \\domain.net\sysvol\domain.net\Policies\{A357D87E-6F4D-4762-9F9A-6B5D3BE436F7}\User
2013-07-04 08:06:04.822 GPO Name : {A357D87E-6F4D-4762-9F9A-6B5D3BE436F7}
2013-07-04 08:06:04.822 GPO Link : (   ) GPLinkUnknown - No link information is available.
2013-07-04 08:06:04.823             (   ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2013-07-04 08:06:04.823             (   ) GPLinkSite - The GPO is linked to a site.
2013-07-04 08:06:04.823             (   ) GPLinkDomain - The GPO is linked to a domain.
2013-07-04 08:06:04.823             ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2013-07-04 08:06:04.823             (   ) GP Link Error
2013-07-04 08:06:04.823 lParam : 0x00000000
2013-07-04 08:06:04.823 Prev GPO : No
2013-07-04 08:06:04.823 Next GPO : Yes
2013-07-04 08:06:04.823 Extensions : [{00000000-0000-0000-0000-000000000000}{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}{3BFAE46A-7F3A-467B-8CEA-6AA34DC71F53}{BEE07A6A-EC9F-4659-B8C9-0B1937907C83}{CF848D48-888D-4F45-B530-6A201E62A605}][{25537BA6-77A8-11D2-9B6C-0000F8080861}{88E729D6-BDC1-11D1-BD2A-00C04FB9603F}][{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}][{5794DAFD-BE60-433F-88A2-1A31939AC01F}{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}][{A3F3E39B-5D83-4940-B954-28315B82F0A8}{3BFAE46A-7F3A-467B-8CEA-6AA34DC71F53}][{B087BE9D-ED37-454F-AF9C-04291E351182}{BEE07A6A-EC9F-4659-B8C9-0B1937907C83}][{E4F48E54-F38D-4884-BFB9-D4D2E5729C18}{CF848D48-888D-4F45-B530-6A201E62A605}]
2013-07-04 08:06:04.823 lParam2 : 0x33d71cd8
2013-07-04 08:06:04.824 Link : LDAP://OU=ou,DC=domain,DC=net
2013-07-04 08:06:04.827 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.830 Read GPE XML data file (1124 bytes total).
2013-07-04 08:06:04.831 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.831 Starting filter [AND FilterCollection].
2013-07-04 08:06:04.831 Starting filter [AND NOT FilterOs].
2013-07-04 08:06:04.832 Starting filter [AND NOT FilterOs].
2013-07-04 08:06:04.832 Starting filter [AND NOT FilterOs].
2013-07-04 08:06:04.833 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.841 ----- Changed - 1
2013-07-04 08:06:04.841 Options : (   ) GPO_FLAG_DISABLE - This GPO is disabled.
2013-07-04 08:06:04.841            (   ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2013-07-04 08:06:04.842 Options (raw) : 0x00000000
2013-07-04 08:06:04.842 Version : 12517567 (0x00bf00bf)
2013-07-04 08:06:04.842 GPC : LDAP://CN=User,cn={F45570D0-E3E9-4C02-B471-11E5708EC6F8},cn=policies,cn=system,DC=domain,DC=net
2013-07-04 08:06:04.842 GPT : \\domain.net\SysVol\domain.net\Policies\{F45570D0-E3E9-4C02-B471-11E5708EC6F8}\User
2013-07-04 08:06:04.842 GPO Display Name : USER-Microsoft-Office
2013-07-04 08:06:04.842 GPO Name : {F45570D0-E3E9-4C02-B471-11E5708EC6F8}
2013-07-04 08:06:04.842 GPO Link : (   ) GPLinkUnknown - No link information is available.
2013-07-04 08:06:04.842             (   ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2013-07-04 08:06:04.842             (   ) GPLinkSite - The GPO is linked to a site.
2013-07-04 08:06:04.842             (   ) GPLinkDomain - The GPO is linked to a domain.
2013-07-04 08:06:04.843             ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2013-07-04 08:06:04.843             (   ) GP Link Error
2013-07-04 08:06:04.843 lParam : 0x00000000
2013-07-04 08:06:04.843 Prev GPO : Yes
2013-07-04 08:06:04.843 Next GPO : No
2013-07-04 08:06:04.843 Extensions : [{00000000-0000-0000-0000-000000000000}{3BFAE46A-7F3A-467B-8CEA-6AA34DC71F53}{CEFFA6E2-E3BD-421B-852C-6F6A79A59BC1}][{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}][{A3F3E39B-5D83-4940-B954-28315B82F0A8}{3BFAE46A-7F3A-467B-8CEA-6AA34DC71F53}][{C418DD9D-0D14-4EFB-8FBF-CFE535C8FAC7}{CEFFA6E2-E3BD-421B-852C-6F6A79A59BC1}]
2013-07-04 08:06:04.843 lParam2 : 0x382b2bc8
2013-07-04 08:06:04.843 Link : LDAP://OU=ou,DC=domain,DC=net
2013-07-04 08:06:04.847 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.851 Read GPE XML data file (4376 bytes total).
2013-07-04 08:06:04.852 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.853 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.857 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.861 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.864 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.868 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.872 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.876 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.880 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.884 Properties handled. [ hr = 0x80070005 "Access is denied." ]
2013-07-04 08:06:04.887 Error suppressed. [ hr = 0x80070005 "Access is denied." ]
2013-07-04 08:06:04.888 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.892 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.896 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.899 RunOnce value created [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.909 Completed get next GPO. [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.909 Completed get GPO list. [SUCCEEDED(S_FALSE)]
2013-07-04 08:06:04.927 Leaving ProcessGroupPolicyExFolderOptions() returned 0x00000000

Illustrator CC2014 won't reopen file just recently edited and closed. "Illustrator cannot open file" message.

Windows 7 Home Premium, Dell XPS desktop. First problems with AI in a LONG time. Used to be able to go to the control panel for programs and "repair" the installation, now can only un-install.
This file is originally from a previous version of AI, opened it in CC2014 and edited, nothing extensive, just text updates, and after closing, it won't open again. And the program crashed. After a re-start of the computer, I could open a different file, but not the "problem" file. After re-doing the edits on another (even earlier) copy of the source file, the same thing happened. I can place the file in InDesign, and export to pdf, which views fine. I plan to try to edit the InD pdf in Illustrator, to see what happens.
Otherwise the computer seems to be fine, all other apps seem stable. So far.

The file size is the same as the previous version. I placed the AI file into InD, made a pdf, and can open and edit that pdf in Illustrator. If I could get the "bad" file to open, I would save as to a new file, see if that would help, but since it won't open.... Just weird. I should have what I need now, so I don't plan to spend any more time on it. Thanks for thinking about it. I just hope I don't end up eventually having to uninstall/re-download and re-install Illustrator!
The only image is embedded, no link. I don't have any non-standard plug-ins. I will keep in mind about the preferences, but why only this 1 file having a problem with them? I did install some fonts for another job while also working on this; I will keep that in mind, too.
Thanks again.

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple in the past asking letting me know a purchase had been made and asking if I had made the purchase, but the item listed has alway been a purchase that I had made. Since I had received similar emails in the past, I didn't think anything of it. Because I had not purchased the item listed, I immediately clicked on the link in order to change my password, which has been suggested in authentic emails i had received from Apple in the past. The site I was redirected to was exactly the same as the Apple site where you go to change your password. I entered my userID and password and it stated a verification email would be sent, if it was not sent click "resend email." When I did not receive an email, after about 10 seconds I went to the Apple site and followed the SAME EXACT step on pages that were IDENTICAL to the FRAUDULENT website I apparently had just been at. When I clicked "Send verification email," I DID receive an email within seconds, which had a special link that brought me to a page where I could change my password, which I did. I later compared a legitimate email to the FRAUDULENT email and I DID FIND A DIFFERENCE, BUT IT WAS ALMOST UNNOTICEABLE unless you were really, really looking. I doubt it would be noticed by anyone if not comparing it closely to a real email. THE DIFFERENCE WAS AT THE BOTTOM OF THE AUTHENTIC EMAIL, THERE WERE THREE LINKS THAT COULD BE SELECTED - My Apple ID/Support/Privacy Policy. ON THE FRAUDULENT EMAIL THESE LINKS WERE NOT PRESENT!!! Just today I received an email from Apple stating my password had been changed today. I did not change my password today. When I changed after getting the fake email, I did not think about my SECURITY QUESTIONS!!! If you forget your Apple password, you are able to answer the security questions in place of your ID and you get a confirmation email. Even though I changed my password within a one minute when I did not get a confirmation email with a link to change my password right away and I went dierctly to Apple's site, apparently it was enough time to take all the information on my account - INCLUDING MY DEBIT CARD NUMBER, WHICH HAD BEEN REQUIRED WHEN I INITIALLY SET UP THE ACCOUNT!!! Today I received a call from VISA FRAUD PROTECTION asking about strange activity on my account and stating they were concerned and wanted to ensure I had used the account. I HAD NOT, AND ALL THE MONEY IN MY BANK ACCOUNT HAD BEEN STOLEN!!!!! I am writing this in hopes that many people will see it and NOT FALL VICTIM TO THIS SCAM. Please pay close attention to any emails you supposedly receive from Apple - If the links "MY APPLE ID/SUPPORT/PRIVACY POLICY," PLEASE DO NOT ASSUME IT IS AN AUTHENTIC EMAIL FROM APPLE. I suggest you immediately forward the email to apple, which I didn't do because this happened days ago. Nothing was taken from my money that was already on the Apple account, and nothing had been taken from my checking account. I guess I assumed there had been something wrong with the link in the email directing me to where I could change my password, plus I had gone to the valid Apple website and changed my password for real, and I guess I was thinking that changing my password would prevent someone from being able to acces my account info. PLEASE DO NOT FALL VICTIM TO THIS SCAM AS I DID!!!!

No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC

Just reloaded Firefox and now I am getting many advertizements.

How to get rid of all the ads? Just reinstalled Firefox and am getting many advertisements.
== This happened ==
Every time Firefox opened
== I reinstalled Firefox

hello, you have malicious addons present. please perform all these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

TS3899 my iphone does not connect to my email provider and fetch my email. I have set up a new account but get the message "server is unavailable"..I have been getting emall ok previously, this occurred when I changed my password on my email account

My iphone does not connect to my email provider and fetch my email. I have been getting emall ok previously, this occurred when I changed my password on my email account. I have "set up a new account" but get the message "server is unavailable". I have tried several things but to no avail. Does anyone have the solution?
Thanks

Did you ever fix this problem? The same thing happened when I just changed my kids passwords and now can't access their mail on their iPods or my iPad but I use the same email provider and mine is fine however I did not change my password. If you fixed it how did you?

HT203551 I changed my password on my primary account on iPhone and after deleting it is not shown asadded to my mail box

I changed my password for the primary email address on my iphone to log in with new PW i first deleted the account from my mail box,adding it again to mail box and icloud both does not show in the mail box...instead an exchange and already present yahoo account of mine stays there.How can I over come that.
Nadeem

Did you ever fix this problem? The same thing happened when I just changed my kids passwords and now can't access their mail on their iPods or my iPad but I use the same email provider and mine is fine however I did not change my password. If you fixed it how did you?

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

Just installed iOS5 on iphone4, now I cant send email?

So I just updated the operating system on my iphone4 to iOS5. Now I cant send email. I can receive email, just cant send. Have tried all the usual remedies such as re-booting, setting up the email account again, changing the outgoing mail server port from 25 to 225 etc. Anyone got any other bright suggestions?
Your dissapointed
ddiphone4

I just posted the same problem-- I have 3 e-mail accounts on my phone and 2 are fine, the third I can receive from but not send-- and like you I have done all the obvious uninstalls and re-installs

A friend just texted me and said that my computer has a virus because it is sending emails.She told me to change my passwords on my email act. (which I did) and on m Facebook acct. which I did. She said that I should run a virus scan on my computer.

Similar Messages

Maybe you are looking for