A if statement and output error
In my form (XML dynamic) I would like to output an error message if the total of a addition is either $200.00 or $250.00.
The name for the calculated amount is called "TOTAL" as outlined in my code below.
My code:
if ( "TOTAL" = 200.00 ) then
I want to output an error message in a box called "ERRORbox"
elseif ( "TOTAL" = 250.00 ) then
I want to output an error message (same message as above) in a box called "ERRORbox"
100
endif
Thanks
We need to go little bit in to basics........
1.When you used "" around TOTAL it is considered as Static text (in other words string constant) So if you remove those "" that will be considered as variable and in runtime the value of that variable is replaced for execution.
2. In FormCalc the equal operator is represented as == not with single =
So try the following hopefully that will work..........
if ( TOTAL == 200.00 ) then
I want to output an error message in a box called "ERRORbox"
elseif ( TOTAL == 250.00 ) then
I want to output an error message (same message as above) in a box called "ERRORbox"
endif
if that did not work try the following.....some times FormCalc is picky and do string comparisons even though it suppose to do numeric comparison.
if ( TOTAL == "200.00" ) then
I want to output an error message in a box called "ERRORbox"
elseif ( TOTAL == "250.00" ) then
I want to output an error message (same message as above) in a box called "ERRORbox"
endif
Let me know if you still have issues.
Similar Messages
-
Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Error in updating OBNK Table ( Bank Statements and Reconciliations,Manual)
PLease advise ,
Bank Statements and Reconciliations,Manual Reconciliation
Client is receiving the following message:
Error in updating OBNK Table
Edited by: Philip Eller on May 20, 2008 9:03 AMHi Darpal Thiarha,
Please kindly refer to note 1132591 and note 1128677 to see if these are relevant to this issue. Upgrading to 2007A PL15 or above may avoid such issues relevant with the error 'Error in updating OBNK Table'.
Regards,
Candice Ren
SAP Business One Forums Team -
I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?
What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method. -
Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.
Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/ -
I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!
Zap the PRAM and Reset the SMC, then try again.
-
i have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?
The internet is the internet. if its not working then its something to do with your not allowing cookies from apple's site or they are having issues.
-
Please Vote if you find this to be helpful!
App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25323.app-v-powershell-script-to-query-xenapp-servers-for-app-v-publishing-errors-and-output-an-excel-document-with-the-results.aspxHi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps. -
Leopard Disk Utility and Input/Output error messages.
This post is describing a problem I had and how I managed to fix it. When I was researching the Input/Output error message I was getting a couple of people had mentioned this fix on the apple discussion boards, so I thought I would add my fix to support them. (Isn't google fab!) I've no idea if this is the right place for this so please bear with me.
Okay a bit of background:- over christmas we treated ourselves to leopard and as my laptop is now three years old I decided to do a complete reformat and installation. I used my 60GB iPod as an external harddrive and backed everything up. Installed Leopard no probs and was a very happy bunny.
The problem:- I then wanted to remove everything off my iPod. So I thought "I know I'll use Disk Utility".... I tried it with the 'default' setting and got an Input/Output error message straight away (irrespective of whether I did it as an extended journal or not.) When I tried it with the Zero Out option (can't remember exactly what it's called) it came up with the Input/Output error message right at the very end. Argh! iTunes and Finder no longer recognised it, but Disk Utility did.
My research:- After using google I saw some guys on here talking about formatting proper external harddrives using leopards disk utility and they were getting the same messages as me. It turns out it is a fault with Leopards Disk Utility. So I did what the guys recommended.
The solution:- (Thank god I had tiger!) I put in my tiger installation disk, clicked 'install tiger' and restarted the laptop. I clicked my my language, but then rather than going through the actual installation process I went to the top menu bars and chose Disk Utility (using tiger's disk one rather than my laptop's leopard one.) And erased the iPod there. Now when I quit the installation and opened my laptop up properly it worked, both iTunes and finder could see it!!! (I just had to restore my ipod in itunes - and now I'm happily transferring all my music back!)
I hope this helps someone in the same position as me!I took it to work to use my Windows PC to try and format the drive, but got the same problem. I figured either the drive (it's a 2.5" that used to be inside my AlBook) or the external housing it lives is was faulty. Only way I could test without spending more money is by putting the 2.5" drive inside my powerbook, and booting the (Ti) powerbook from a bootable firewire ipod. I successfully booted from the ipod, and had the same problem with the now internal drive: only visible in disk utility, any attempt to erase fails. Also, I plugged the small 10 GB drive that WAS in the TiBook (but which I removed to put the other, problematic drive in) into the external housing, and it connected to other machines just fine.
Turns out the problem is the hard drive itself.
So now my question becomes: If disk utility can see the hard disk when it is connected (I have it back in the external enclosure now), but gives "input/output error" messages when I try to erase/format it, is there any way I can salvage this drive? It's an 80 GB drive, and I was looking forward to making it my internal TiBook drive (replacing the old 10 GB drive that's in there now). -
[SOLVED] Input/Output error, read and writing ..
This is my brand new Seagate 500GB disk making troubles, it is formatted with NTFS for easier accessing trough Windows because it is sometimes plugged into an external case.
[dezza@dezza ~]$ sudo rm -rf store/BADDIR/
rm: cannot remove `store/BADDIR/tonsi-tonsi.r09': Input/output error
I don't hope this means it's broken Cause I filled it to the limit with valuable stuff ..
I tried remounting and rebooting ..
Last edited by dezza (2008-05-14 14:21:54)Well, it's happened on this new disk a bought a few weeks ago, can I check it to be certain that it is a bad disk somehow?
-
Macbook 2.1 and Western Digital BPVT input/output errors
Hi. After a hard drive failure in my macbook I tried upgrading to a 320GB Western digital BPVT hard disk. Unfortunately the macbook can't seem to read the disk properly when plugged in internally and it shows the capacity as 2.3TB and gives an input/output error when I try to erase the disk (it does show correctly the Description WDC WD3200BPVT).
The hard disk itself works. If I plug it into the sata caddy my windows 7 PC can see it, format, write and delete to it. AND if I plug the same caddy into the macbook as an external disk it can read it and write to it etc. The only difference I can think of is the caddy doesn't support S.M.A.R.T and as soon as the disk is put in internally I get the 2.3TB capacity and input/output errors. That said I put the hard disk in a HP laptop and it recognised the hard disk internally and installed the OS ok.
I tested the macbook with a scorpio blue BEVT 500GB and that works perfectly. So I know it's not the controller or capcity issue. Is it the BPVT? People on the discussion say this drives works fine, I'm just not sure if I'm missing something. I was fixing this computer for a friend and not 100% when it comes to Macs.
Has anyone seen this issue before? Is there anything I can do to get the hard drive to work in the mac..
Hardware used:
Western Digital Scorpio Blue WD3200BPVT Hard Disk Drive,320GB, 5400rpm, 8MB Cache, SATA 3 Gb/s
MacBook 13" circa mid 2007 (model 2.1)Hi, unfortunately not, I never found a fix. I had to swap the disk for a BEVT.
The BPVT worked in a 2009 MacBook. It appears to be the older 2007 MacBook can't read a BPVT, I tried a lot and couldn't get it to work. -
Pb of input/output error between iPod and my PBG4
Hi
I have a iPod Nano 2Go and I get all of the problems listed here : wether I try to restore or use the Disk mode, nothing worked ;
all that I could get was a message of error : one saying "1418 error" and other saying "input output error". I tried everything
all I only did was disconnect the ipod when I didn't have to do it.
I have this ipod since last month, and I am really disapointed of that problem
the worst is that Apple doesn't seem to care about it.
Is anyone getting any idea about that...???
Thanks
Kriss / F.GuianaI suggest that take a read the following first, and find a PC connect your iPod with it and follow the instruction
http://discussions.apple.com/thread.jspa?threadID=640556&tstart=0 -
URGENT! Having problem with while statement and other syntax errors
I am trying to teach myself JSP for a school project due very soon. But I keep receiving errors surrounding my while statement. The errors are:
Syntax: ";" inserted to complete BlockStatements
Syntax: "}" inserted to complete Block
I have checked it over and over again, comparing against other examples found in this forum and against servlet examples and I can see no difference. This is my file for your information. It is supposed to list all the users in the user table. Is there a simpler way to do this?
regards
rach
<%@ page language="java" import="java.sql.*, java.util.*"%>
<html>
<head>
<title></title>
</head>
<body>
<%! String selected = null; %>
<%
try{
// Connect to the database
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection con = DriverManager.getConnection("jdbc:odbc:dbtest");
catch(ClassNotFoundException e) {
System.out.println("Database driver could not be found.");
System.out.println(e.toString());
throw new UnavailableException(this, "Database driver class not found");
try{
//create SQL statement
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * from USER ORDER BY User_lastname, User_firstname");
catch(SQLException e){
System.out.println("Error connecting to the database.");
System.out.println(e.toString());
throw new UnavailableException(this, "Cannot connect to the database");
%>
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td width="10"> </td>
<td width="200" valign="top" align="center">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr><td><form method="post" action="userupdatedelete.jsp" target="content" name="userlist">
<h2>Users</h2>
</td>
</tr>
<tr>
<td width="10"> </td>
</tr>
<tr>
<td valign="top"><select size="15" name="rec">
<!-- if the resultset is not null -->
<% try {
//if (rs.next()) {
While (rs.next()){
//retrieve data from User table
String userid = rs.getString("User_ID");
String firstname = rs.getString("User_firstname");
String lastname = rs.getString("User_lastname");
out.println("<option value='userid'>lastname + ', ' + firstname</option>");
//<option value="<%=userid%>"><%=lastname + ", " + firstname%></option>
//else {
// out.println("<option> - No Users Entered - </option>");
//<option> - No Users Entered - </option>
stmt.close();
con.close();
catch (SQLException ex){
System.err.print("SQL Exception :");
System.err.println(ex.getMessage());
%>
</select>
</td>
</tr>
<tr>
<td align="center"><input type="submit" value="Update/Delete"></td>
</tr></form>
<tr>
<td><br></td>
</tr>
<tr>
<td align="center">
<form method="post" action="useraddform.jsp" name="addbuttonform">
<input type="submit" value=" Add New " name="addnew">
</tr></form>
</table>
</td>
<td width="10"> </td>
</tr>
</table>
</body>
</html>There is a problem here with the "scope" of variables namely your variables "rs" and "stmt". Variables declared within a try block are available only within that try block. Also, the type for stmt is not even given.
Change:
try{
//create SQL statement
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * from USER ORDER BY User_lastname, User_firstname");
catch(SQLException e){
System.out.println("Error connecting to the database.");
System.out.println(e.toString());
throw new UnavailableException(this, "Cannot connect to the database");
}to:
Statement stmt = null;
ResultSet rs = null;
try
//create SQL statement
stmt = con.createStatement();
rs = stmt.executeQuery("SELECT * from USER ORDER BY User_lastname, User_firstname");
catch(SQLException e)
System.out.println("Error connecting to the database.");
System.out.println(e.toString());
throw new UnavailableException(this, "Cannot connect to the database"); -
ESS ERP2005: total compensation statement and salary statement errors
Hello everyone,
I am facing two problems with ESS on NW04s J2EE SP10 w. Portal and ERP2005 Backend. Both have been discussed here but some time ago and no sufficient answer has been found so I'd like to do a recap:
1) Salary Statement (and Time Slip also).
Even if the PAY_SLIP_XY form in hrforms is correct, working within ERP transaction (PY-HF) and customized in IMG HRFOR, the iview producdes the error "<myForm>" not found. When I change <myForm> the change is recognized so obviously the customizing is correct. The same is about Time_Slip forms.
Anyway, can anyone point me to a link to integrate Adobe DS at this point, should I, or isn't this possible yet?
2) Total Compensation Satement ivew throws an ArrayIndexOutOfBoundsException -1. The first few stack trace lines are:
at com.sap.mw.jco.JCO$Record.getString(JCO.java:12778)
at com.sap.aii.proxy.framework.core.JcoBaseTypeData.getElementValueAsString(JcoBaseTypeData.java:669)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.getAttributeValueAsString(DynamicRFCModelClass.java:427)
at com.sap.xss.hr.rep.model.rfwmodel.Hrxss_Ser_Rfw_Rfc_Get_Form_Output.getHeight(Hrxss_Ser_Rfw_Rfc_Get_Form_Output.java:179)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:395)
Restarting the server doesn't help, the server was newly started as the error occured.
Maybe I missed some IMG activity? I went through the Company Compensation Management and added some values to compensation type, the structure is definied, but not sure if this is all.
Pls can anyone help. I'm just implementing the standard BP for the moment, no individual app.
Regards
CarstenHi Patrick,
no unfortunately not and as you can see we've got no answers.
But I'm still in the need to fix it. It's not very urgent, but to know the solution would be great.
In general we still have problems with print forms in ESS/MSS webdynpro implementation. The HRFORM is defined and well customized in IMG, so I think this is not the point.
As I pointed out in another post I am confused if Adobe Document Services is needed to render (PDF) print forms since ESS/MSS 600 (for ERP 2005) or what else.
Do you know?
Did you get other print forms like salary statement working?
I went through the entire post installation procedure regarding Adobe DS but it did not help.
I always get ther failure "The form is the form customized for ESS in IMG and the form does exist and is tested within HRFORM transaction.
Except the time slip (and as well total compensation), where we get this "ArrayIndexOutOfBounds" exception.
Regards
Carsten
Message was edited by:
Carsten Schön
Message was edited by:
Carsten Schön
correction: error also in total conpensation statement -
my digital ports PA,PB,PC are in high state and cannot be set low even if it is set for outputs.
ThanksThe MAX utility is the closest to the driver level and will eliminate software configuration as a possible issue. Please disconnect anything that you have connected to the DIO lines.
Use the MAX test panel for your DIO lines, configure them as outputs, and set them to a low state. Use a multimeter (DMM) to observe the line state. If it is still high then you may have a problem with your hardware. If this is the case, I advise calling National Instruments support and investigate a possible RMA (repair).
Best Regards,
Justin Britten
Applications Engineer
National Instruments
Maybe you are looking for
-
Error in writing to file '/u01/app/oracle/product/10.2.0/lib/libocr10.so'
I am in middle of Oracle 10.2.0.3 pachest installation and getting this error: Error in writing to file '/u01/app/oracle/product/10.2.0/lib/libocr10.so' I shutdown database and listenter prior to start of upgarde. Any idea? OS AIX 5.2
-
Dear all, I have created Import Purchase order with multiple account assignment. But while doing MIRO for custom vendor for planned delivery cost, system giving me the error message as below, No delivery cost can be posted in case of multiple account
-
I just install Acrobat X pro for mac on iMac 10.6.5. Everything went smoothly with one exception. I wasn't able to add the Acrobat virtual printer that was there in other versions. Is it no longer available? If so how do I create the printer? Thank
-
9.1 UI Customization for Field Display Size
Hi, Guys, Just upgrade from 9.0 to 9.1 and started to do the UI customization. I noticed it seems that we can move around those fields on the forms, but we can not resize them. Is that correct? If we can, please advise how to. How about UDFs? Frank
-
Vl31N- Updation of Partner Function and Partner Number on screen
Hello Everyone, I have a requirement of updating the Partner Fucntion(PARVW) and Partner number(PARTNER) while creation of INBOUND DELIVERY on the basis of PO. For which i have located a BADI : LE_SHP_DELIVERY_PROC ,under which method FILL_DELIVERY_H