A message on the screen said I need to update Firefox but I checked and it is current
When I opened Firefox (the homepage is www.google.com) there was a message saying I needed to update Firefox, and after a couple times, I checked and Firefox is current, it doesn't have an update. My computer OS is Mac 10.5.8. I also have concerns the computer has recently been tampered with thru the internet. I'm computer illiterate.
== This happened ==
Just once or twice
== in the last couple weeks
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Similar Messages
-
having problems upgrading general on my i pad
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
Hi
My mini i pad has frozen. I cant turn it off or opporate the screen. I have a nessage on screan telling me my storage is full in i cloud but I cant navigate to settings or closeTry this to get rid of the message.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
[This is the second time I have typed this out. I don't understand where these things disappear to. Anyway . . .]
Originally, some months ago, I was at my Yahoo e-mail site, and a notice came up suggesting that I update my Firefox. I clicked for them to go ahead and start the process. It didn't install anything, but this *thing* appeared on my (Mac) desktop that said *yahoo_firefox_3.6.8_setup_is.dmg*. I continued to get noticed to upgrade, and I thought by clicking on that button did that.
Tonight, I decided to try again. This time, the same thing happened. It downloaded on my desktop, but didn't install. Now I have two files sitting on my (Mac) desktop. The original that says 3.6.8 and the new one which says the same thing except that it is a 5.0 version. I have a Mac OS X 10.4.11 system.
My questions: How do I install Firefox from my desktop with the file thingy they sent me? and (2) What version do I use?When I clicked on the second site mentioned, I got such EXPLICIT, step-by-step directions!!! Thank you so much. I'd been wondering what that window was that kept popping up with the Firefox icon and that other funny thing. The word *install* was never mentioned. Pictographs were never my thing.
When I looked under the initial system requirements, it said that OS X 10.4.5 and higher were good for 5.0. I didn't check further. Under your advice, I'll go with the older version. Thank you for taking the time to help me. -
Recently I upgraded to 5.0 on my IMac (OS X 10.5.8). Shortly after I began to get popups telling me I need a Firefox software update. When I click on "About Firefox" , it tells me updates are available and gives me the link to the website. When I do a check on the website, it tells me I'm up to date. Are these popups some kind of malware? If so, how can I get of them?
Actually it was just for 10.5 and 10.7 only as the 10.6 was a typo in release notes.
http://www.mozilla.com/en-US/firefox/5.0.1/releasenotes/
Worked around an issue in Mac OS X 10.7 that could cause Firefox to crash
Worked around an issue caused by Apple's "Java for Mac OS X 10.'''5''' Update 5" where the Java plugin would not be loaded
http://blog.mozilla.com/products/2011/07/08/firefox-5-minor-update-for-mac-coming-soon/ -
Firefox was unable to open google, and I saw there was an update for that problem, but I am unable to install the update (or any update for that matter) as well as removing Firefox. Every time I try to do so, I get a message that I must close Firefox first (even though there are no windows open). I checked applications to be sure, and it does not appear Firefox is running when this happens.
Hi kshikuma. This happens to me sometimes, as well.
To solve this issue, open the Windows Task Manager by hitting Ctrl+Alt+Del.
Go to the "Processes" tab and see if a process named "firefox.exe" or "plugin-container.exe" is opened. Close any and all such processes by right-clicking them and selecting "End Process". -
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
I conneced the Apple TV and it worked fine at first. It has worked well for some time. We are using them in our school this year, as well as converting to all apple products. I have been able to pull up my computer screen through Apple TV onto our projectors. However, tonight when I started apple TV, the mirroring icon came up, and everything seemed fine. Then a message came up that the Apple TV Box needed an update. I clicked on the button to run it now, and it seemed fine. The mirroring worked for about 5 minutes after the update, then I got a screen that had a picture of the Apple TV Box and a USB cord directed toward a picture of the iTunes icon. The light on the frontof the component flashed, and I couldn't go to the menu at all. I wouldn't do anything. I no longer cold see the Airplay/mirroring icon on my computer either. I tried to shut everything off and reboot the computer and the Apple TV box. However, none of this worked.
Any suggestions??? I'm a high school football coach, and this is how our team will watch film this year. I really need to get this rectified by the end of the week, as our team will go into camp for the next two weeks.Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for IOS4.3.3 but when the update was complete the apps would no longer work. They would just flash when I tapped the screen to bring them up but will stay displayed. What is the problem?
I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3 -
I have a windows 7 ultimate pc. It is 64 bit and had Itunes running on it. it said i needed to update itunes. (was at 11.1.62). during the load it reported i needed system admin privliges I am in admin acct. it then could not start the mobile device driver.it reported my c++ for visual was bad. i reloaded the c++ libary.
it still would not load. so i removed itunes and dounloaded a freash copy. same problem. I just use itunes to load my ipads and iphone. but this is driving me to wards a different OS.Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
the old version of itunes had a drop down box listing songs that did not sync newer version does not how can i see what songs did not sync, The box message on the screen says 19 items did not sync to your ipad, see itunes for more information. Where do I look??
Hello Tonchee
If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
what do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated…… and now they are gone!!!!!! WHat do i do!!!!!! Is this some type a virus???? my mac is protected!!!!! tried to chat with an IT person but they keep asking if its like a tech problem and it is just iphoto
You should get your keyboard checked as it's repeating on a lot of keys and makes you look silly.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I have an iPhone 3G. I removed the simm card and placed it in another phone. Now I want to use it to just play music. I keep seeing a message on the screen that says the simm card is missing. Are there settings I can use to prevent this message?
no are gonna need a SIM card in the iphone for it to work even to play music on it
Maybe you are looking for
-
Can no longer play KCRW Left, Right and Center
Since upgrading my 5G ipod to latest version. It will no longer play certain podcasts. The one listed above is one nbut there are others. Buzzcast from CNET is one it stopped playing for a time but then after teh latest itunes update it now plays it
-
My speaker is no longer working on my IPhone 4s; I can't listen to music, hear the phone ring or listen to Siri. I can hear everything just fine with earbuds or when it is connected to a docking station. I reset all content & settings, powered down
-
Hi I have a scenario where the PI receives an XML response (the interface is of a predefined xsd type) from an HTTP destination; I need to pass the same to the ABAP system using an RFC. Can I use any standard mapping function to map the XML file of
-
Bug Report: Static LOV's and PDF Printing with Tabular Forms
I have a tabular form, which acts as an editable report. Some columns are 'Standard Report Column' and some are Select Lists, using Static LOV's with the contents of Yes;Y,No;NThe purpose of the page is to allow users to edit yes/no attributes of a r
-
Specify baseline amount in MIRO?
Hi -- can anyone tell me if it's possible to manually specify a baseline amount (for cash discounts) when entering an invoice in MIRO? I found some SAP help text which says 'During document entry, the amount qualifying for cash discount can be determ