A new Bug Found

Hi Mr. Steve,
I am using your example from your blog "Optional Required Fields" and i have noticed the following behaviour.
You have a table with 4 columns, Id, RowType, ValueA and ValueB.
Id and RowType is mandatory and ValueA and ValueB are not (they are forced to be mandatory by the selection of the RowType.
I created a sequence ("Test_Seq") so to populate the Id. I overriden the create method in the TestEntityImpl.java to populate the Id automatically:
protected void create(AttributeList attributeList) {
super.create(attributeList);
SequenceImpl sequence = new SequenceImpl("TEST_SEQ", getDBTransaction());
this.setId(sequence.getSequenceNumber());
I then create a jspx and dragged the TestEntities View as an ADF Creation Form.
I deleted the RowType and dragged it again as a selectOneRadio, with two static values (A and B).
In the valueChange listener i created a bean and incuded the following code so that it will not force the validate method before a selection is made:
public void RowTypeChanged(ValueChangeEvent valueChangeEvent) {
FacesContext.getCurrentInstance().getExternalContext().getRequestMap().put("RowTypeChanged","x");
I then opened the Page Definition xml file for my page and inside the binding i created an attribute value for the RowType that i have deleted earlier.
In the controller class i specified the "view.util.ConditionalValidationPageController".
By the way, i dragged your updateTest() method onto my submit button to commit the transaction.
When i run the page, everything works fine. Conditional validation works.
However, i don't want to have the Id input text enabled, so i disabled it (becuase it is populated automatically by the sequence).
When i run the page, and select a value for RowType and have the other fields empty (ValueA and ValueB), instead of showing me the error, the form goes into edit mode, bringing the last record. VERY STRANGE.
Can you please give me a solution into how i can overcome this?
Thank you
Antonis

Please email me a JAR file of the version of my demo that reproduces the problem along with the exact steps to reproduce the problem. I don't have time this week to reproduce the issue myself from scratch, but you if can help me out by doing that, it will make it easier to diagnose.
** Please remove the two large *.jar files from ./ViewController/public_html/WEB-INF/lib to make the JAR file you send me smaller.
Thanks.

Similar Messages

  • Components disarray New bug found?

    I created a dashboard using among other, sliders and progress bars (Engage 2008). I exported the dashboard to power point  and everything went OK. I decided to go back to the Xcelsius file, and to my astonishment, the sliders' width was now one fifth the original and the width of the progress bars was about five time wider !!
    The power point file was not affected
    I fixed both components widths, exported them again, went back to the original CX file....and again the same disarray!! I did this four times and the problem appeared always. Can someone tell me why is this happening?
    Or is it a new bug?
    Thanks!

    It seems very easy to mess something up on the canvas in xcelsius. Locking all the components until you need to edit one ensures you don't accidentally mess one up. Well I need to, anyway...
    Also, since I started getting weird effects like losing references, components reverting to their original size when I had edited them days ago etc, I thought it was better to lock components before saving. It seems to have reduced the incidence of such behavious but I could be imagining it: I still have unexpected and quite damaging behaviour as reported elsewhere on this forum.

  • New bug introduced with Keynote 5.2 - Set timing and order of each build has stopped working properly on Smart Builds

    Hi there,
    We're heavy users of Keynote and have noticed a new bug has recently been introduced into something that was stable. I think it has emerged in Keynote 5.2, could have been Keynote 5.1 also.
    It's in the area of Set Timing and Order of each build when used on a Smartbuild. You can no longer set the Start Build field for each instance within the Smart build when the instances are interspersed between other items. The Start build field is just blank and unselectable.
    To see this :
    1. Create a bullet point list with 4 lines
    2. Set build to Appear
    3. Set "Set Timing and Order of each Build" to on
    4. Create a Smart Build - set to flip
    5. On the Smart Build Set "Set Timing and Order of each Build" to on
    5. re-order the items in your Build Order so that they alternate between the bullet point and the smart build flip
    At this point, you used to be able to set the bullets so that they Started on Click and then set the smart builds to Start with previous. This gave you a nice and very useful effect where you could click to reveal a bullet point and at the same time flip in a corresponding image. We've used this loads of times in our company presentations.
    With a recent keynote update ( I think 5.2 maybe, could have been 5.1) this functinality has been lost. have tried it on Lion and Mountain Lion and it's not an OS issue, its a Keynote issue.
    Could anyone from Apple acknowledge that they know the issue and suggest if it will get fixed? Right now we're hunting round for an old Keynote 9 DVD so we can install a pre build 5.2 version.
    Thanks

    Hi glennelliott72,
    I've noticed the bug you describe and to me it's very irritating.
    I also found some differences in the build menu between the last release and the previous one, and between the Mac OS X and iOS versions. For instance, the blast build doesn't exist anymore in Keynote 5.2 but it's still in the version for iOS 6.
    What is your experience about?
    I currently use OX Lion.
    Thank you

  • New bug in Aperture 2.1

    I had been using Aperture 2.1 for some time with only the usual bugs, most commonly, the Viewer screen going black or blue or red occasionally, but a new bug has appeared that is forcing me to restart Aperture frequently. After making edits, when I move on to the next image in the Browser (the thumbnail highlighting changes, as it should) the image in the Viewer does not change. I have not found a way to get a new image in the Viewer except restarting Aperture. This is greatly slowing down my processing of big projects.
    Has anyone else seen this bug? Have you found a workaround beside restarting?

    Tony Finnerty wrote:
    I had been using Aperture 2.1 for some time with only the usual bugs, most commonly, the Viewer screen going black or blue or red occasionally, but a new bug has appeared that is forcing me to restart Aperture frequently. After making edits, when I move on to the next image in the Browser (the thumbnail highlighting changes, as it should) the image in the Viewer does not change. I have not found a way to get a new image in the Viewer except restarting Aperture. This is greatly slowing down my processing of big projects.
    Has anyone else seen this bug? Have you found a workaround beside restarting?
    can u guys please give us a little more info? where's the aperture library located? in your main hard drive (os x) or on another drive?
    are you sending the crash logs to apple?
    thanx,
    victor

  • New BUg in 645E MAX 2

    Hi, I found a new bug in 645E MAX 2. When you run the FSB at 145Mhz, and boot it up, the actual frequency that it will run is 87. something... I verified this in wcpuid. On top of that, I ran the sandra benchmark and that also verified that the FSB was running slower. I change the FSB to 144 and 146, and both ran fine ehehhe...

    i guess the system cant handle 145 and set itself to safe values after freezing?

  • Portal slowing down after import of application (New bug in 3.0.8 ??!!!!)

    We have two complete IAS installation (Portal 3.0.8+DB 8.1.7.0 EE) based on NT4.0. One is development, second production. Before moving application, clean prod machine is running forms very fast (least than 1 sec to show complete form). After importing application into the same schema (moved exp/imp db utility), performance is slowing down 1000%. The same form appear in 3~4 minutes.
    What's wrong with my portal.
    Does anybody move successfully from dev to prod on NT environment?
    I'll appreciate for any comments.
    Marcin

    Regarding the performance issue..
    There is a workaround provided at: Thanks for this - helped 100%
    Marcin
    PS.
    Now I complete give up. We bought IAS1.0.2, which appear rather like beta version (more 20 registered bugs found just by us). Than oracle support concern that ver. 3.0.8 of Portal will be cure for any previous bugs. Then I lost two weeks of my work trying to install new version and fighting with low performance.
    Small piece of history:
    Portal 3.0.8 for NT was available since 12 april 2001.
    31 may 2001. Now Oracle is saying that 3.0.9 will be bug free. Maybe you should sit down for a while and develop some ver 3.x.x.x test and after you don't find anything release it.
    Don't test your software on the customers.
    We bought sw, get the knowledge and want to start our project. But how we couldn't do it on platform which is changing every three weeks?!!!!!!
    It's smells like Microsoft.
    NT4.0, srvpack1, srvpack2 (dangerous),srvpack3 forget,srvpack4, srvpack5 - Y2K, . . ... .. .
    #$@$%%@!!!%%%^^
    null

  • Elements 13 - No New People Found In Your Selection

    So frustrating to see that this bug is still present in the new version. Now it's even worse.
    I try to add people tags to a photo and get the infamous "No New People Found In Your Selection". I was previously on PSE 11 and I was certain that this would be fixed in the new version.
    Nope. It's still here.
    But now it's even worse.
    It starts a leak in the app that eventually consumes all available memory
    And this is an "Upgrade"???
    The Organizer is an important part of this software and yet this issue has been around for too long.
    Adobe, please correct this problem soon. This memory leak is BAD and brings the OS to it's knees.
    Erick

    Erick,
    Please try following troubleshooting steps:
    1. C:\ProgramData\Adobe\Elements Organizer\Catalogs
    and select the catalog you are currently working in.
    2. Rename the BreezeSession.dat file present in the catalog folder to BreezeSession_old.dat
    3. Now relaunch Organizer and try adding people now.
    Thanks,
    Anwesha

  • How much money i will get, if i tell you a new bug in Firefox 8

    how much money i will get, if i tell you a new bug in Firefox 8, i found a new bug in Firefox 8, i tested this bug on chrome but their is no issue with this .

    About the only way you could get money is by reporting a serious or critical security vulnerability that has not been reported before.
    http://www.mozilla.org/security/bug-bounty.html
    http://www.mozilla.org/security/bug-bounty-faq.html

  • [svn] 4223: Some fixes for bugs found running the TC acceptance tests:

    Revision: 4223
    Author: [email protected]
    Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
    Log Message:
    Some fixes for bugs found running the TC acceptance tests:
    - Empty try {} throwing NPE while emitting code.
    - OP_Callproperty and OP_Callproplex may have a known type but default value.
    - Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
    Modified Paths:
    flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

    Re: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
    If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
    ) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
    Type the following commands:
    takeown /f C:\Windows\*.cdf
    cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
    Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
    2) Unpack the previous Support Pack or Creative official release.
    3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
    4) Make sure the following files were deleted, otherwise delete them manually:
    - For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
    - For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL.

  • Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

    9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
    Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
    And the file name would be "MIC and the date file created etc..."
    I noticed that these files where all starting with the letters MIC at the front of the filename...
    For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
    and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
    I have the latest Firmware on my MP3 Player.
    The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
    The tag showed up appropriately and I have had no problems since.
    It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

    =Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
    I used Windows Media Player to sync the files.
    I used Creative Central to transfer the files.
    These two methods produced results where the file starting with MIC turned into a voice recordings.
    I also had problems just copying and pasting the files (using windows explorer).
    I have not had any problems with any other file. I normally use MP3Tag to tag my files.
    However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
    I tried as many work arounds as possible. But once i renamed the file it worked.

  • New bug in Ultrabeat into Logic Pro 8.0.1

    Hey guys check this... a brand new bug (hope it would be only my mac, but with 8.0.0 there wasn't)
    so open ultrabeat, choose the preset called Drag & drop samples under Drum Kits.
    (just to use one free preset)
    load a file and record something, then press play in order to listen your drum and try to load an other sample to make comparison (example: load a kick, do a 4/4 drum, try to replace the kick with an other sample and check the Preview sample in ultrabeat to try comparison... )
    after this update no more Preview sample in ultrabeat voice (and than note will stop on playing when u try that function
    sorry for the english

    finally i find someone else with the same prob, o already post into apple.com too
    yes here the same, bug new in 8.0.1, cause on logic 8.0.0 all works fine (except some click noise when you pre-listen a file in autoloop)
    however here what i can say to you (it's 3 days i'm studyng this cause i make a massive use of ultrabeat)
    - no matter both power pc / intel soffer of this bug
    - i try to update to leopard from my 10.4.11 (same bug) tryin a new os installation (same bug), tryn without audio card and driver (same bug)
    so i really don't know how to solve it, cause there are only few people that have this problem
    big mistake and big mistery

  • "No new people found in your selection" problem

    I am now getting a report of "no new people found in your selection" from Elements 11. This is happening despite having people in the images and when looking at individual photos, Elements seems to indicate that there is indeed a face there. What I am now missing is the capability of running facial analysis on a group of photos and identifying the faces "in bulk." This feature did work at one time but does not now.
    All also note that when I get the boxes around faces on individual photos, Elements no longer suggests people for the faces.
    Any ideas on how to get facial recognition to start working again?

    Preferences are set: for People recognition to Analyze Photos for People Automatically.
    I tried unchecking this and running people analysis manually. Neither works:1(

  • VSphere Port Mirror - Possible Bug Found

    Hi,
    Something i came across to and thought could be worth while reporting it since i havent seen any reference to it elsewhere:
    We've configured a few "source remote port mirror rules" for a few VMs, in a way that each VM had 3 vNics that were mirrored.
    long story shot: one VM had one vNic that was E1000 and not VMXNET3 like all the others, each time i enabled the "source remote port mirror" rule for the E1000 vNic, all other port mirrors (from this VM and other VMs located on the same ESX) stopped working. problem was solved after i removed the vNic and created a new one, this time a VMXNET3 vNic.
    didnt see any reference about E1000/VMXNET3 regarding vSphere Port Mirroring. New bug maybe?

    Hi,
    Something i came across to and thought could be worth while reporting it since i havent seen any reference to it elsewhere:
    We've configured a few "source remote port mirror rules" for a few VMs, in a way that each VM had 3 vNics that were mirrored.
    long story shot: one VM had one vNic that was E1000 and not VMXNET3 like all the others, each time i enabled the "source remote port mirror" rule for the E1000 vNic, all other port mirrors (from this VM and other VMs located on the same ESX) stopped working. problem was solved after i removed the vNic and created a new one, this time a VMXNET3 vNic.
    didnt see any reference about E1000/VMXNET3 regarding vSphere Port Mirroring. New bug maybe?

  • T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no netowork

    T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no network,  so installed drivers for the chipset and network. Still no way to go on inernet.
    Folloing drivers i installed from following site. What do I do now:
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT035703
    Oss50w – chipset driver
    7ora09ww – Ethernet driver
    1ywc54ww – wifi driver

    Hi guys and thanks for your help. Yes, after authenication and working on this Windows partition, I have less than 3GB space. Also, I cannot drag and drop files from desktop, like a text file into the Windows partition. Says it doesn't have permissions to drop files.
    It looks like now I will in fact have to start from scratch and repartition the HD but put in a minimal 12GB or so into the Windows partition. Also, I tried to name the Windows label, but it's locked and under get info, it says the Windows partition is read only, ownership grayed out and says it is NT coded format. Shouldn't that be MS-DOS or FAT 32 automatically?
    I have to tell all of you that this is getting time consuming, too complicated and when I get my own ProBook, I have no desire to install VISTA or MS whatever. Plus, we have to still do the MS security pack updates and install virus software for the Windows partition, isn't that correct?
    Is there a step by step link here like a BootCamp/Windows XP Pro installation tutorial so I can move a bit faster on my next attempt?
    Thanks SteveB

  • Message "New files found in your watched folder".

    I keep getting a message "New files found in your watched folder".  But it shows me old files. If I say I want to download them, it tells me it cannot.
    PE 11   Windows 7

    Watch folders is a function of the Elements Organizer, it has nothing to do with the Editor half of the program.
    Do you want to use Watched Folders? If not, disable them by going to File > Watch Folders, then uncheck the "Watch Folders and their Sub-Folders for New Files" option. If you want to use the option, try creating a new folder and set that up as the watched folder and place your images there. The Watch Folders option can get messed up if the folder has images already in it when it is set up.

Maybe you are looking for

  • Typical scenario- urgent reply,,,

    Hi All, I  have a requirement- we get damaged products into plant- and we do value addition to the damaged product and sent it as a finished product to the customers, also we dont want to valuate it at plabt level as its customer product. And to that

  • Where can I find Flash and Acrobat Install packages for Mac OS X?

    I'm managing over 200 Macs, and I need the Package Installs for Flash and Acrobat, and I need them everytime you decide to release an update. Our Department has licenses for 50 copies CS 6 Design & Web Premium, but the Adobe Manager doesn't manage Fl

  • Relocation error from JNI

    Hi, I am writing a java program which uses JNI to call old c++ libraries, and got error message: ld.so.1:jdk/bin/sparc/native_threads/java:fatal relocaiton error:file /home/myhome/lib/libtest.so: symbol __xxxxx: referenced symbol not found libtest.so

  • Safari is Crashing Constantly

    Today, my Safari browser unexpectedly quit on me. This was out of nowhere. This has happened about 60 consecutive times and is really annoying me. It will shut off after running for about 4-6 minutes. I will post the crash log in another post. Thanks

  • G5 shuts down on wake-up

    What I thought was a cordless Logitech mouse problem has become something more fundamental and varied. At first, the mouse kept cutting out. I reverted from the most recent LCC to a prior version. I tried plugging it into a USB hub, and it worked. Th