A problem about GP parameters mapping.

Hi, all.
I tried to group two parameters together.
Those are both structured parameter with cardinality 0.n.
But when I groupped them together , the cardinality became 0.1 .
I had no idea how this happened. Can anyone give me a hand?
Thanks

This is a system bug for NW7.01.

Similar Messages

How to pass input parameter (parameterized mapping) to java mapping program

Hello
I have a question about the parameterized mapping with Java (PI 7.1).
In the operation mapping (using Java-class) I defined a inputer parameter (string). I think I am supposed to retrieved the value using:
arg0.getInputParameters().getString("myInputParameterName");
where arg0 is the TransformationInput object.
However I am not able to get the value, I got runtime exception saying the inputer parameter doesn't exit.
Then I figured out maybe I need to bind the OM input parameter to Java mapping parameter, just like in case of message mapping, you need to bind OM parameter to MM parameter. However there is no way to define input parameter for the java mapping program.
Anybody has done java mapping with parameterized mapping?
Anybody can give any hint for this?
Thanks
Jayson

InputParameters params = container.getInputParameters();
DynamicConfiguration conf = (DynamicConfiguration) params.getValue(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Edited by: Anand on Dec 10, 2008 4:13 PM

Parameterized Mapping - Binding Problem

Hi All,
I am using a parameterized mapping and i have given 2 import parameters in OM and also in Interface Determination. I am getting below error. anyone faced this problem before?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TX_MISSING_IDET_PROP</SAP:Code>
<SAP:P1>B113C2A0483E11E1C980A298F37B7F02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Parameter binding (ID = B113C2A0483E11E1C980A298F37B7F02) for interface determination is missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

After creating binding variable in ESR, you have to create binding variable in the interface determination. The value you pass over there is saved in the created variable in operation mapping. Hope you understand.
Refer setting parameter values in interface determination portion of the link
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
Also activate and refresh cache. Sometime this might be due to caching problem and not properly set the parameter values.
Hope that helps.

A problem about calling Labview vi in VB

Hi all:
I meeting a problem about data transfer and parallel operation between VB and Labview.
Actually, I want develop a VB program, in which, the Labview VI can be called and corresponding parameters can be transferred to Labview. and then, I also can operate my system by VB program at same time. something like parallel operation (VB and Labview program).
But the question is :
1. If I use "Call" method of ActiveX in VB, and the LabVIEW subvi is not stopped (for example, a loop structure), I can not do parallel operation on VB program. The error message is "other application is busy" which is attached below. The sample codes is also attached.
2. I tried to use other methods like "OpenFrontPanel" and "Run", but I am not sure how to transfer the parameter??
3. Then I tried to use "SetControlValue" to set the parameters, but there is a error " := expected", which is very strange, because the statement I wrote is followed with the help documents [ eg: VI.SetControlValue ("string", value)], why it is still need a "=" ??
Does anybody know something about it? Thanks a lot
Message Edited by hanwei on 11-07-2008 03:18 PM
Attachments:
vb_labview_error_message_1.JPG ‏14 KB
VB_to_LV.zip ‏10 KB

I sure hope OP has solved it by now.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Problem Installing/Running Ovi Maps Plugin

Hi everyone,
I seem to be having a small problem with Ovi Maps 3.0 which I'm hoping somoene can help with. Probably an obvious solution to my problem but I can't seem to get the Ovi Maps plugin to install/run.
When I try to install nothing happens. I make sure to select accept the terms of reference but when I click the (green) Install the Free Plugin nothing happens.
Would anyone have any ideas on why this is happening? Any suggestions would be appreciated.
Thanks!

You are using IE 8 ?
Same here... and there are messages about that somewhere in an OVI-forum....Plugin can not install on IE8.
There are workarrounds described.. one is to deinstall IE8 (so you will fall back to IE7), then install with IE7 and then reinstall IE8 again..... the other workarround is to modify registry and implement plugin manually.
I decided to wait until there is a fix..... i'm not sure what the plugin will give to me..... i am a little bit disappointed about how OVI maps work on PC compared with other products......

Question about parsing parameters through url

Hello,
I have some questions about parsing parameters through a url.
What I want to build is a page with some text fields and maybe one drop down list. After user enter values into the text fields and select one option in the drop down list, then press the submit button, a report will be opened, which according to the parameters parsed.
These were what I have done:
1. create a blank page and a region
2. create one text field in the region, the name is FIRSTNAME
3. create one hidden items FN, of which the source value is item FIRSTNAME
4. create a process. the type is "Set Preference to value of Item" which set PN with the value of FIRSTNAME when the page submitted
5. create a button "Submit Page and Redirect to URL", in the URL I entered:
http://dianti.local.net:9704/xmlpserver/~shichao/GuestFolder/orderdetail/orderdetail.xdo?_xpf=&_xpt=0&_xdo=%2F~shichao%2FGuestFolder%2Forderdetail%2Forderdetail.xdo&FIRSTNAME=&FN.&_xt=orderdetail&_xf=pdf&_xmode=4
My problem is: it seems working for the first time after I entered a value in the FIRSTNAME text field and press submit button, but when I come back to the page (the report was opened in the same page, wondering how to open it in a new window?), the value is saved in the text field and after I enter another value and submit the page again. It still parse the old value to the report. The value of the parameter doesn't change.
What's the reason? and is this the correct way to build what I want?
Thank you in advance.
Best Regards,
Shichao

Hi Scott,
Thank you again for the help.
But this didn't answer my question exactly. I have tested what you created and the problem remains. When I first time enter a value in the text field and press the button, it goes to page 2, but the parameter didn't parsed. When I go back to page 1 and then click the button again. After that I can see the value I parsed on page 2. Same thing happens when I try to enter a new value. So which means the button has to been pressed twice to parse the parameter.
Due to the limitation of my knowledge of Apex. I don't know how to fix it. Could you please help me again and hope you understand what the problem is. Thank you very much.
Shichao

An old and difficult problem about "UnsatisfiedLinkError"

Hi dear all,
I have been struck with the problem about "UnsatisfiedLinkError". I have a c++ class HelloWorld with a method hello(), and I want to call it from within a java class. In fact, I have succeeded in calling it on the windows platform. But when I transfer it to linux, the error "UnsatisfiedLinkError" comes out. I have tried to take the measures as Forum has suggested, but it failed.
The source code is very simple to demonstrate JNI.
"HelloWorld.h"
#ifndef INCLUDEDHELLOWORLD_H
#define INCLUDEDHELLOWORLD_H
class HelloWorld
public:
void hello();
#endif
"HelloWorld.cpp"
#include <iostream>
#include "HelloWorld.h"
using namespace std;
void HelloWorld::hello()
cout << "Hello, World!" << endl;
"JHelloWorld.java"
public class JHelloWorld
public native void hello();
static
System.loadLibrary("hellolib");
public static void main(String[] argv)
JHelloWorld hw = new JHelloWorld();
hw.hello();
"JHelloWorld.cpp"
#include <iostream>
#include <jni.h>
#include "HelloWorld.h"
#include "JHelloWorld.h"
JNIEXPORT void JNICALL Java_JHelloWorld_hello (JNIEnv * env, jobject obj)
HelloWorld hw;
hw.hello();
All the files are in the same directory and all the processes are under the dirctory:
1. javac JHelloWorld.java
2. javah -classpath . JHelloWorld
3. g++ -c -I/usr/java/jdk1.3/include -I/usr/java/jdk1.3/include/linux JHelloWorld.cpp HelloWorld.cpp
4. ld -shared -o hellolib.so *.o
5. java -cp . -Djava.library.path=. JHelloWorld
Exception in thread "main" java.lang.UnsatisfiedLinkError: no hellolib in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at JHelloWorld.<clinit>(JHelloWorld.java:7)
Tried another measure:
i) export LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH
ii)java -cp . JHelloWorld
The same error came out as above.
I really don't know what is wrong with it.
Would you like to help me as soon as possible?
Thanks.
Regards,
Johnson

Hi Fabio,
Thanks a lot for your help.
It is very kind of you.
Regards,
Johnson

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Problem while activating message mapping

Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.

Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine

Problem about Handling of Empty Files in File Adapter

Hello everyone,
NetWeaver 2004s --- XI
In Sender i have a File Adapter.
Now i meet a problem about Handling of Empty Files. When i send empty file, but don't cerate a leer message.
I have seen following text in help document. But in adapter configuration i can not find the correspond parameter.
can you give me some tips?
Thx in advance
best regards
Yaning
SAP Help Document über File Adapter
+Handling of Empty Files
Specify how empty files (length 0 bytes) are to be handled.
○       Do Not Create Message
No XI messages are created from empty files.
The files are processed according to the selected Processing Mode.
For example, if the processing mode is Delete, empty files are deleted in the source directory.
○       Process Empty Files
XI messages are created with an empty main payload.
The files are processed according to the selected Processing Mode.
○       Skip Empty Files
No XI messages are created from empty files.
Empty files are skipped and remain in the source directory.+
Help Docu

hi,
it's available since Sp19 for XI 3.0
and the corresponding SPS fpr XI 7.0
http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
so probably you need to install the new SP
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Problem about sales order stock stock transfer and batch determination

Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
Can anybody help me? Is there anything else I need to do? Thanks very much.

I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted from SAP.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Problem in data source mapping - CAF entity service.

Hi,
I created an external service for the bapi given below.
It has 2 tables as input parameters.
In entity service I created attributes(for input parameters) for table1 and table2. but in data source i couldn't map more than one attribute to the MATNRSELECTION and PLANTSELECTION.The attributes of the bapi are under the same collection.
I'm using NWDS version 7.0.06.
BAPI_MATERIAL_GETLIST (To List all Materials for a Particular Plant)
Input Parameters:
Table1: MATNRSELECTION
MATNRSELECTION-SIGN
MATNRSELECTION-OPTION
MATNRSELECTION-MATNR_LOW
Table 2: PLANTSELECTION
PLANTSELECTION-SIGN
PLANTSELECTION-OPTION
PLANTSELECTION-PLANT_LOW
Regards,
Shobhendra

in your entity if you did create 2 attributes for one material number and one for plant, you can map them to the corresponding MATNRSELECTION-MATNR_LOW and PLANTSELECTION-PLANT_LOW.
For the sign and option, you should uncheck the IsNull parameter in the "Entity to External Operation parameters" mapping window of the Datasource Tab of your entity. And you should set default values like sign = I and option = EQ or something like that.
But if you want to pass a list of material numbers or plants, I do have a recollection from last year experiments of some limitation using collections as input parameters. maybe somebody else had better success with that

Problem in JDBC Adapter Mapping

Hi all,
I am working on a scenario wherein i am trying to connect an ORACLE DB to SAP 4.7 system using XI 3.0 . I configured the JDBC Adapter and the JDBC adpter is picking up the message but i have a problem in JDBC adpter Mapping.
The error message is like this:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_ORACLE_MSGMAP_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_ORACLE_MSGMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
How to map the "Resultset" from the Adapter to a target message? Can anybody throw some light on how to get the message from the JDBC adpter and map it to some other message format...Any documents regarding this ?
Waitin for ur replies...
Bye,
Romit Shankar Arun.

Hi,
Does your other SDN post "Inserting data through JDBC adapter" refer to the same problem?
I assume you use XMLSPY for creating XSDs.
I used the XSD posted by you in the other forum thread and tried to generate the XML structure and it does not seem to generate the XML structure in the format required by the JDBC adapter.
sample file generated from your XSD posted in the other forum thread:
<?xml version="1.0" encoding="UTF-8"?>
<resultset xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Untitled1.xsd">
     <row action="INSERT">
          <CUSTOMER_NUMBER>String</CUSTOMER_NUMBER>
          <COUNTRY_KEY>String</COUNTRY_KEY>
          <FIRST_NAME>String</FIRST_NAME>
          <LAST_NAME>String</LAST_NAME>
          <AUTHORIZATION_GROUP>String</AUTHORIZATION_GROUP>
          <INDUSTRY_KEY>String</INDUSTRY_KEY>
          <ACCOUNT_GROUP>String</ACCOUNT_GROUP>
          <INTIAL_CONTACT>String</INTIAL_CONTACT>
          <COMPANY_CODE>String</COMPANY_CODE>
          <CITY>String</CITY>
          <CITY_CODE>String</CITY_CODE>
          <COUNTRY_CODE>String</COUNTRY_CODE>
          <DISTRICT>String</DISTRICT>
          <FAX_NUMBER>String</FAX_NUMBER>
          <HOUSE_NUMBER>String</HOUSE_NUMBER>
          <POSTAL_CODE>String</POSTAL_CODE>
          <REGION>String</REGION>
          <TELEPHONE_NUMBER>String</TELEPHONE_NUMBER>
     </row>
</resultset>
Compare the above to the template i have mentioned.
Hope this helps.
Regards,
Sridhar

Parameterized mapping in PI 7.31 Dual Stack

Hi All,
I am working on PI 7.31 Dual Stack. I am getting the below exception in parameterized mapping:
com.sap.aii.utilxi.misc.api.BaseRuntimeException; com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter TestVal does not exist.
I could test in MM test tab but facing the issue in runtime. Please suggest me where I am going wrong.
Thanks,
Madhurima

Hi Madhurima,
Have you checked if your PI version and patch level is being affected with this note 1933139 - Errors during execution of operation mapping with message mapping parameters names different from the operation mapping parameter names?
Regards.

A problem about GP parameters mapping.

Similar Messages

Maybe you are looking for