A problem due to a namespace conflict!!

Dear Edwin,
The problem of the proxy, was partially solved. this
has been "overcame" by using a private ISP
and not our university network. Though the
compilation of the example
orabpel/samples demos/AmazonFlow.bpel
was successful, there is still a problem.....
as shown in (1), since I am not able to execute the
AmazonFlow process instance with BPEL manager (see 2).
I would appreciate any help from you..
Thank you very much in advance!!!
Abdelkder
--------------- (1) -------------------
C:\orabpel\samples\demos\AmazonFlow>SETLOCAL
Buildfile: build.xml
main:
[bpelc] [Error] AmazonWebServices.wsdl:9:45: src-resolve.4.2: Error resolvin
g component 'soapenc:Array'. It was detected that 'soapenc:Array' is in namespac
e 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespac
e are not referenceable from schema document 'http://soap.amazon.com/schemas3/Am
azonWebServices.wsdl'. If this is the incorrect namespace, perhaps the prefix of
'soapenc:Array' needs to be changed. If this is the correct namespace, then an
appropriate 'import' tag should be added to 'http://soap.amazon.com/schemas3/Ama
zonWebServices.wsdl'.
[bpelc] bpelc> validating "C:\orabpel\samples\demos\AmazonFlow\AmazonFlow.bp
el" ...
[bpelc] bpelc> BPEL suitcase deployed to: C:\orabpel\domains\default\deploy
BUILD SUCCESSFUL
Total time: 1 minute 41 seconds
C:\orabpel\samples\demos\AmazonFlow>ENDLOCAL
When I execute the process with the BPEL manager I get
the following error in the BPEL server command prompt.
----------------- (2)------------------
<BaseCubeSessionBean::logError> Error while invoking bean "process manager": Fai
led to read wsdl.
Error happened when reading wsdl at "http://dekdouk:9700/orabpel/default/AmazonF
low/1.0/AmazonFlow.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error
reading file: No route to host: connect".
Make sure wsdl exists at that URL and is valid.
<2005-01-22 03:16:41,406> <ERROR> <default.collaxa.cube.engine.agents> <SimpleJo
b::execute> Error while executing agent.
An error occured while attempting to execute the job "dispatch" for agent "dispa
tch". The exception reported was : Dispatcher schedule error.
An error occurred while scheduling a batch message with the dispatcher. The exce
ption is: Couldn't initialize JMS resources.
An exception thrown while initializing JMS destination "java:comp/env/jms/collax
a/BPELWorkerQueue", the reason is Unable to create a connection to "dekdouk/213
.181.171.6:9,127" as user "null".
Please check your jms server configuration and make sure that you have configure
d the "java:comp/env/jms/collaxa/BPELWorkerQueue" destination and make sure that
your JMS server is up and running.

Similar Messages

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

OMB02904: Namespace conflict for map name

Hello all,
I was running an OMB script which was to create the several Mappings, and after the creation of all the mappings it was supposed to commit. This script was being run in UNIX env, but unfortunately the UNIX session got killed and script terminated, persumably before commit, because I do not see any of the mappings in OWB.
So I started the script again but got this message,
OMB02904: Namespace conflict for map name MAP_1: PRS-00303: Name <MAP_1> Already reserved under your user name. with
oracle session ID: 31
I cleaned up the oracle sessions in Design Rep, but still getting the same error message both at command line and in GUI.
Has anyone else in the forum experienced similar problem. Any suggestions or pointer on How to fix thi will be appreciated.
TIA

It seems that the mapping got created. Have you tried to refresh the OWB client to see the mapping by clicking on the "Synchronize this view with the repository" button (second icon from the left just under the "Project" menu entry)? If this is true, you will either have to delete the existing mapping and commit, or rename your mapping.
Regards:
Igor

My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has initializing problems due to an icc profile issue.

my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

Mobile circuit problem due to technical problem wi...

i bought nokia C3 with one year warranty.
once it had some problem due to water falling on it..i repaired it with other agency.
after some time its circuit was short and it stopped working..when i consulted nokia care for the same,they were not ready to take the responsibility for the same..
this is my second Nokia mobile in which i had a loss..of around INR 6000/-
i can't bear this amount every time..i suggest you to take a corrective action and pls do the needful..ASAP..so that i can have a clear idea about the further action to be taken against you.

How is Nokia Care responsible if you got your set repaired at non Nokia care place(voids terms of warranty) after spilling water on it ( which also voids terms of warranty)?
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

OMB02904 Namespace Conflict Creating Mapping

Hi, we are running OWB 11GR2 on Windows and I am having trouble creating a mapping as allegedly it already exists. I can find no trace of this either through the GUI, through OMBPlus, or even using the JAVA APIs to find the offending mapping. It is also not visible in owbsys.all_iv_xform_maps or owbsys.all_iv_objects.
I cannot OMBDROP the mapping as it does not exist !
The full message in OMBPLUS is OMB02904 Namespace Conflict for map name WORK_SELF_EMPLOYED_INCOM_TA1M1: API0408 Within same namespace domain one object has already used the name WORK_SELF_EMPLOYED_INCOM_TA1M1
If you have any suggestions they would be gratefully received !
Phil

Our repository DB uses a Windows character set WE8MSWIN1252.
I have done a trawl through mappings and tables through all our Modules in a couple of ways (note my OMBPlus may not be the best you have ever seen). Note that these code snippets do work with 'real' mappings, but they do not find my phantom mapping.
set objectToFind WORK_SELF_EMPLOYED_INCOM.*
OMBCC '/IDP'
set moduleList [OMBLIST MODULES]
#set moduleList [list IPS2_SA1]
foreach moduleName $moduleList {
puts "Module name = $moduleName"
OMBCC '/IDP/$moduleName'
set tableList [OMBLIST TABLES '$objectToFind']
foreach tableName $tableList {
puts "=== Found table $moduleName/$tableName"
set mapList [OMBLIST MAPPINGS '$objectToFind']
foreach mapName $mapList {
puts "=== Found mapping $moduleName/$mapName"
============================================
Java API based search
set mapToFind WORK_SELF_EMPLOYED_INCOM_TA1M1
set repManager [java::call oracle.owb.connection.RepositoryManager getInstance]
set owbConnection [$repManager getConnection]
set projectManager [java::call oracle.owb.project.ProjectManager getInstance]
set project [$projectManager getWorkingProject]
# for every module
set modList [$project getOracleModuleNames]
set modCnt [$modList length]
for {set ic1 0} {$ic1 < $modCnt} {incr ic1} {
# Find your Oracle module
set modName [$modList get $ic1]
set modObj [$project findOracleModule $modName]
if {("$modName" != "RELEASES") && ("$modName" != "ARCHIVE")} {
# Proc logit defined earlier to output to a file
logit "Processing module $projName/$modName"
set mapList [$modObj getMapNames ]
set mapCnt [$mapList length]
for {set ic2 0} {$ic2 < $mapCnt} {incr ic2} {
set mapName [$mapList get $ic2]
if { "$mapName" == "$mapToFind" } {
logit "======= Found the bugger $mapName"
===============================
Nothing here either ....
SELECT *
FROM owbsys.all_iv_xform_maps
WHERE business_name LIKE 'WORK_SELF_EMPLOYED_INCOM%';
SELECT *
FROM owbsys.all_iv_objects
WHERE object_name LIKE 'WORK_SELF_EMPLOYED_INCOM%';

HT1386 has anyone ever had synch problems due to "PAIRING RECORD IS MISSING

Has anyone ever had synch problems due to "Pairing record missing"? Just downloaded new IOS on my computer and this is what message came up

Try rebooting your computer.

Problem due to Namespace in XML

Hi,
From XI (Outbound proxy from R/3), using an XML package I am calling a webservice of a 3rd party system to create a contract. The webservice is failing. The 3rd party system is saying that it is failing becuase of the additonal lines in XML (like namespace details and hypens in the XML). Please see the below XML message that is displayed in Payload in SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" ?>
<b>-</b> <<b>ns0:MT_SM_Contract xmlns:ns0="http://test.com/xi/sm"></b>
<b>-</b> <CONTRACTS>
<b>-</b> <Control>
<createdWhen>2006-06-09T06:09:52</createdWhen>
<destinationAddress />
<documentGUID>495f31bc-9f99-4e56-9db7-ce5dc7095785</documentGUID>
<operation staticValue="Change" />
<schemaVersion>31N</schemaVersion>
<sourceAddress>Global</sourceAddress>
<version>3.00</version>
</Control>
Is it possible to remove the namespace details and Hypens in XI before calling the Webservice.
Thanks
Sri

Kumar,
While defining MT, delete the name space that is automatically read in XML NameSpace field.
Go to Q no 12 in the following link:
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
-Naveen.

Failover cluster failed due to mysterious IP conflict ?

I'm having a mysterious problem with my Failover cluster,
Cluster name: PrintCluster01.domain.com
Members: PrintServer01.domain.com andPrintServer02.domain.com
in the Failover Cluster Management – Cluster Event I received the Critical error message 1135 and 1177:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 15/06/2011 9:07:49 PM
Event ID: 1177
Task Category: None
Level: Critical
Keywords:
User: SYSTEM
Computer: PrintServer01.domain.com
Description:
The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk.
Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is
connected such as hubs, switches, or bridges.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 15/06/2011 9:07:28 PM
Event ID: 1135
Task Category: None
Level: Critical
Keywords:
User: SYSTEM
Computer: PrintServer01.domain.com
Description:
Cluster node 'PrintServer02' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run
the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node
is connected such as hubs, switches, or bridges.
After further investigation, I found some interesting error here, from the very first critical error message logged in the Event viewer on PrintServer02:
Log Name: System
Source: Tcpip
Date: 15/06/2011 9:07:29 PM
Event ID: 4199
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: PrintServer02-VM.domain.com
Description:
The system detected an address conflict for IP address 192.168.127.142 with the system having network hardware address 00-50-56-AE-29-23. Network operations on this system may be disrupted as a result.
192.168.127.142 --> secondary IP of PrintServer01
how could that be possible it conflict by one of the PrintServer01 node ? the detailed is as below:
**From PrintServer01**
Ethernet adapter Local Area Connection* 8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
Physical Address. . . . . . . . . : 02-50-56-AE-29-23
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 169.254.1.183(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
I have double check in all of the cluster members that all IP addresses is now unique.
however I'm sure that I the IP is static not by DHCP as from the IPCONFIG results below:
From **PrintServer01** (the Active Node)
Windows IP Configuration
Host Name . . . . . . . . . . . . : PrintServer01
Primary Dns Suffix . . . . . . . : domain.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.com
domain.com.au
Ethernet adapter Local Area Connection* 8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
Physical Address. . . . . . . . . : 02-50-56-AE-29-23
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 169.254.1.183(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Cluster Public Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-50-56-AE-29-23
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.127.155(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : 192.168.127.88(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : 192.168.127.142(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : 192.168.127.143(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : 192.168.127.144(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.127.254
DNS Servers . . . . . . . . . . . : 192.168.127.10
192.168.127.11
Primary WINS Server . . . . . . . : 192.168.127.10
Secondary WINS Server . . . . . . : 192.168.127.11
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Cluster Private Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection #2
Physical Address. . . . . . . . . : 00-50-56-AE-43-EC
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.184.2.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
From **PrintServer02**
Windows IP Configuration
Host Name . . . . . . . . . . . . : PrintServer02
Primary Dns Suffix . . . . . . . : domain.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.com
domain.com.au
Ethernet adapter Local Area Connection* 8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
Physical Address. . . . . . . . . : 02-50-56-AE-5F-E5
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 169.254.2.86(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Cluster Public Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-50-56-AE-79-FA
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.127.172(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : 192.168.127.119(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.127.254
DNS Servers . . . . . . . . . . . : 192.168.127.10
192.168.127.11
Primary WINS Server . . . . . . . : 192.168.127.11
Secondary WINS Server . . . . . . : 192.168.127.10
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Cluster Private Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection #2
Physical Address. . . . . . . . . : 00-50-56-AE-77-8D
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.184.2.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Any help would be greatly appreciated.
Thanks,
AWT
/* Server Support Specialist */

I
am facing the same scenario as the original poster. This is on Server 2008 R2 SP1.
WIndow event log entries follow the same pattern. The MAC address listed in connection with the duplicate IP belonged to the passive node.
Interestingly, the Cluster.log begins to explode with activity a few milliseconds before the first Windows event is logged.
2012/07/11-15:20:59.517 INFO [CHANNEL fe80::8145:f2b9:898e:784e%37:~3343~] graceful close, status (of previous failure, may not indicate problem) ERROR_IO_PENDING(997)
2012/07/11-15:20:59.517 WARN [PULLER SQLTESTSQLB] ReadObject failed with GracefulClose(1226)' because of 'channel to remote endpoint fe80::8145:f2b9:898e:784e%37:~3343~
is closed'
2012/07/11-15:20:59.517 ERR [NODE] Node 1: Connection to Node 2 is broken. Reason GracefulClose(1226)' because of 'channel to remote endpoint fe80::8145:f2b9:898e:784e%37:~3343~
is closed'
2012/07/11-15:20:59.517 WARN [RGP] Node 1: only local suspects are missing (2). moving to the next stage (shortcut compensation time 05.000)
2012/07/11-15:20:59.548 WARN [NETFTAPI] Failed to query parameters for fe80::5efe:169.254.1.79 (status 80070490)
2012/07/11-15:20:59.548 WARN [NETFTAPI] Failed to query parameters for fe80::5efe:169.254.1.79 (status 80070490)
2012/07/11-15:20:59.579 INFO [CHANNEL 192.168.3.22:~3343~] graceful close, status (of previous failure, may not indicate problem) ERROR_SUCCESS(0)
2012/07/11-15:20:59.579 WARN cxl::ConnectWorker::operator (): GracefulClose(1226)' because of 'channel to remote endpoint 192.168.3.22:~3343~ is closed'
2012/07/11-15:20:59.829 INFO [GEM] Node 1: EnterRepairStage1: Gem agent for node 1
2012/07/11-15:21:00.141 INFO [GEM] Node 1: EnterRepairStage2: Gem agent for node 1
2012/07/11-15:21:00.499 WARN [RCM] Moving orphaned group Available Storage from downed node SQLTESTSQLB to node SQLTESTSQLA.
2012/07/11-15:21:00.499 WARN [RES] IP Address <Cluster IP Address>: WorkerThread: NetInterface ef150d1a-f4a1-4f4f-a5c7-6e7cb2bfacab changed to state 3.
2012/07/11-15:21:00.499 WARN [RCM] Moving orphaned group MSSTEST from downed node SQLTESTSQLB to node SQLTESTSQLA.
2012/07/11-15:21:00.546 WARN [RES] IP Address <SQL IP Address 1 (DEVSQL)>: Failed to delete IP interface 2003B882, status 87.
2012/07/11-15:21:00.562 WARN [RES] Physical Disk <Cluster Disk 2>: PR reserve failed, status 170
2012/07/11-15:21:00.577 WARN [RES] Physical Disk <Cluster Disk 1>: PR reserve failed, status 170
2012/07/11-15:21:00.593 WARN [RES] Physical Disk <Cluster Disk 3>: PR reserve failed, status 170
2012/07/11-15:21:02.215 WARN [NETFTAPI] Failed to query parameters for 192.168.3.32 (status 80070490)
2012/07/11-15:21:02.215 WARN [NETFTAPI] Failed to query parameters for 192.168.3.32 (status 80070490)
2012/07/11-15:21:05.864 DBG [NETFTAPI] received NsiParameterNotification for fe80::5cd:8cc2:186:f5cb (IpDadStatePreferred )
2012/07/11-15:21:06.565 ERR [RES] Physical Disk <Cluster Disk 2>: Failed to preempt reservation, status 170
2012/07/11-15:21:06.581 ERR [RES] Physical Disk <Cluster Disk 2>: OnlineThread: Unable to arbitrate for the disk. Error: 170.
2012/07/11-15:21:06.581 ERR [RES] Physical Disk <Cluster Disk 2>: OnlineThread: Error 170 bringing resource online.
2012/07/11-15:21:06.581 ERR [RHS] Online for resource Cluster Disk 2 failed.
2012/07/11-15:21:06.581 WARN [RCM] HandleMonitorReply: ONLINERESOURCE for 'Cluster Disk 2', gen(0) result 5018.
2012/07/11-15:21:06.581 ERR [RCM] rcm::RcmResource::HandleFailure: (Cluster Disk 2)
2012/07/11-15:21:06.581 WARN [RES] Physical Disk <Cluster Disk 2>: Terminate: Failed to open device \Device\Harddisk5\Partition1, Error 2
2012/07/11-15:21:06.581 ERR [RES] Physical Disk <Cluster Disk 1>: Failed to preempt reservation, status 170
2012/07/11-15:21:06.581 ERR [RES] Physical Disk <Cluster Disk 1>: OnlineThread: Unable to arbitrate for the disk. Error: 170.
2012/07/11-15:21:06.581 ERR [RES] Physical Disk <Cluster Disk 1>: OnlineThread: Error 170 bringing resource online.
Full cluster log here:
https://skydrive.live.com/redir?resid=A694FDEBF02727CD!133&authkey=!ADQMxHShdeDvXVc

Problem cf10 installation xml error - Conflicting values for output property method

We just completed a ColdFusion 10 installation on Windows Server 2008 R2. After taking care of some configuration issues, we're now faced with a problem that we can't figure out. Searches on Google for the error returned almost nothing.
The error occurs when xmltransform is called in a CFC file. The error we get from CF is:
An error occured while Transforming an XML document
             Failed to compile stylesheet. 1 error detected.
It's not very helpful. In the coldfusion-error.log file, we have this entry:
Error at xsl:output on line 2 column 193
XTSE1560: Conflicting values for output property method
Anyone have any ideas how to fix this? Is it something simple that we overlooked, or a fundamental difference in the way CF10 handles xmltransform?
Thanks,
Jamie Carter

Here is the XSLT:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns="http://www.w3.org/1999/xhtml">
<xsl:output method="html" doctype-public="-//W3C//DTD XHTML 1.0 Transitional//EN" doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" media-type="application/xhtml+xml" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\aacc_main_browse.xsl" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\rotator\aacc_home_rotator.xsl" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\nav\aacc_home_side_menu.xsl" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\news\aacc_home_news.xsl" />
<xsl:template match="page">

        <div class="home_rotator_nav_div">
          <div class="nav" id="nav"><xsl:comment>nav div</xsl:comment></div>
        </div>
        <div id="home_rotator_container">
          <xsl:call-template name="home_side_menu" />
            <xsl:choose>
              <xsl:when test="string-length(text/child::*[attribute::seq=12])=0" >
                <xsl:comment>emergency alert not active</xsl:comment>
              </xsl:when>
              <xsl:otherwise>
                <div id="emergency">
                <div id="emergencyClose">
                  <a onclick="document.getElementById('emergency').style.display='none';">
                    close <img src="/aacc-cms/general/images/icons/controls/close.png" />
                    </a>
                  </div>
                  <div id="emergencyHeader"><h1>AACC Alert</h1></div>
                  <xsl:apply-templates select="text/child::*[attribute::seq=12]" />
                  <br /><br />
                </div>
              </xsl:otherwise>
            </xsl:choose>
          <div class="home_rotator_img">
                <xsl:call-template name="aacc_home_rotator" /><xsl:comment>rotator</xsl:comment>
          </div>
        </div>
<div id="body_container_top_bg"><div id="body_container_bottom_bg"><div id="homepage_body_container">
        <div class="bottom_center_home">
          <div id="bottom_center_content">
            <xsl:if test="string-length(image/child::*[attribute::seq=1]/imgFile)>0" >
              <div id="homepage_ad_1a">
                <xsl:apply-templates select="image/child::*[attribute::seq=1]" />
              </div>
            </xsl:if>
            <div id="homepage_ad_1b">
              <xsl:comment>bottom ad</xsl:comment>
              <a href="#"><xsl:apply-templates select="image/child::*[attribute::seq=2]" /></a>
            </div>
          </div>
        </div>
       <div id='e2campus' style="visibility:hidden;"> <script type="text/javascript" src="http://widgets.omnilert.net/f300fe3c5dccfdb6d076ecb0048934fa-1791">//</script> </div>
        <div id="body_bottom_left_home">
          <div id="body_bottom_right_home">
            <h2>AACC Highlights </h2>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=7])>0" >
                  <div id="tertiary_1_txt1" ><xsl:apply-templates select="text/child::*[attribute::seq=7]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=8])>0" >
                  <div id="tertiary_1_txt2" ><xsl:apply-templates select="text/child::*[attribute::seq=8]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=9])>0" >
                  <div id="tertiary_1_txt3" ><xsl:apply-templates select="text/child::*[attribute::seq=9]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=10])>0" >
                  <div id="tertiary_1_txt4" ><xsl:apply-templates select="text/child::*[attribute::seq=10]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=11])>0" >
                  <div id="tertiary_1_txt5" ><xsl:apply-templates select="text/child::*[attribute::seq=11]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <xsl:if test="string-length(image/child::*[attribute::seq=3]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=3]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=4]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=4]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=5]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=5]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=6]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=6]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=7]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=7]" />
                </div>
              </div>
            </xsl:if>
          </div>
          <div class="bottom_left_home">
            <h2 style="font-size:16px; font-weight:bold;"><a href="/newsroom" style="color:#ffffff;">AACC Newsroom</a></h2>
            <div id="home_news_content">
              
              <div id="news_articles" class="news_articles">
              Loading newsroom feed...
                <img src="/aacc-cms/general/image/cleardiv.png" />
              </div>
            </div>
          </div>
        </div>
      </div>
    </div>
</div>
</xsl:template>
<xsl:template match="image/child::*[attribute::seq < 3]" ><xsl:call-template name="genImg" /><br /></xsl:template>
<xsl:template match="image/child::*[attribute::seq > 2]" ><xsl:call-template name="genImg" /></xsl:template>
</xsl:stylesheet>

When I click on an email address on a web page, a page no longer opens in my email program. Not sure if this is a problem due to Firefox or due to recent installation of Office 2010. I use a PC with Vista.

When I click on an email address embedded in a web page, a page would open in my email program with this address in the "To" line. I recently installed Microsoft Office 2010 and now when I click on an email address nothing happens. I am not sure if this is due to Office 2010 or a Firefox problem. I use a PC with Vista.

https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

Vodafone Sure Signal problem due to BT stability

Just a quick post to help any Vodafone Sure Signal users who are struggling to make calls.
There are major compatibility issues between SS and the various BT hubs. Go to the vodafone forum to see how many people are struggling to make calls and many suggestions on what to do. I am surprised no one has started a 'class action' against Vodafone!
This post relates to a different problem as I am one of the lucky ones who has managed to get the hub & SS talking to each other properly.
I recently returned from holiday to find that my Sure Signal wouldn't work at all. Classic problem all three lights on but no calls in or out. Tech support sorted it out and it started working --- well sort of!
However over half the time I just got a beep when trying to make a call and never received incoming calls. Anyway after a lot of investigations I noticed that stability of the 'Ping' (latency) on the line was absolutely awful. It didn't affect browsing too much but clearly the SS is very susceptible to lost packets and long ping times.
Spoke with BT Tech Experts who asked me to monitor and report back to them.
I found a piece of software that automates the ping testing called surprise surprise Ping Tester see www pingtester.net You can run it in eval mode.
I set it to ping Google every hour for 1000 seconds and found that about 8% of the pings were getting lost and that a considerable amount of the time the ping was over 200ms.
Monitoring started on a Saturday but I didnt start recording the info till Sunday. Then miraculously on Monday morning some time after 9.17 am on Monday the problem went away. (8% lost pings to zero) I suspect that a BT engineer reset something but have no proof of this.
Anyway the problem has gone away for now. See below for actual results. The records for 10 am - 1.00 pm are missing because I left the spreadsheet open and ping tester couldn't write to the file.
I am continuing to monitor the ping and have noticed occasional deteriorations for a couple of hours but so far it has always returned to zero lost pings.
Start Time
To
Sent
Received
Lost
Loss Rate
Min Time
Max Time
Avg Time
19/01/2014 17:34
19/01/2014 17:35
128
118
10
7.81%
34 ms
271 ms
41 ms
19/01/2014 18:00
19/01/2014 18:08
500
464
36
7.20%
34 ms
191 ms
39 ms
19/01/2014 19:00
19/01/2014 19:09
500
458
42
8.40%
34 ms
132 ms
39 ms
19/01/2014 20:00
19/01/2014 20:08
500
465
35
7.00%
34 ms
130 ms
38 ms
19/01/2014 21:00
19/01/2014 21:08
500
468
32
6.40%
34 ms
188 ms
39 ms
19/01/2014 22:00
19/01/2014 22:08
500
461
39
7.80%
34 ms
155 ms
39 ms
19/01/2014 23:00
19/01/2014 23:17
1000
918
82
8.20%
34 ms
343 ms
39 ms
20/01/2014 00:00
20/01/2014 00:17
1000
911
89
8.90%
34 ms
214 ms
39 ms
20/01/2014 01:00
20/01/2014 01:17
1000
922
78
7.80%
34 ms
238 ms
38 ms
20/01/2014 02:00
20/01/2014 02:17
1000
920
80
8.00%
34 ms
131 ms
38 ms
20/01/2014 03:00
20/01/2014 03:17
1000
930
70
7.00%
34 ms
154 ms
39 ms
20/01/2014 04:00
20/01/2014 04:17
1000
920
80
8.00%
34 ms
143 ms
38 ms
20/01/2014 05:00
20/01/2014 05:17
1000
940
60
6.00%
34 ms
160 ms
39 ms
20/01/2014 06:00
20/01/2014 06:17
1000
929
71
7.10%
34 ms
153 ms
38 ms
20/01/2014 07:00
20/01/2014 07:17
1000
946
54
5.40%
34 ms
129 ms
37 ms
20/01/2014 09:00
20/01/2014 09:17
1000
913
87
8.70%
34 ms
322 ms
40 ms
20/01/2014 14:00
20/01/2014 14:17
1000
1000
0
0.00%
33 ms
76 ms
35 ms
20/01/2014 15:00
20/01/2014 15:17
1000
1000
0
0.00%
32 ms
94 ms
34 ms
20/01/2014 17:00
20/01/2014 17:17
1000
1000
0
0.00%
33 ms
828 ms
39 ms
20/01/2014 18:00
20/01/2014 18:17
1000
999
1
0.10%
33 ms
879 ms
47 ms
20/01/2014 19:00
20/01/2014 19:17
1000
1000
0
0.00%
33 ms
119 ms
35 ms
21/01/2014 00:00
21/01/2014 00:17
1000
1000
0
0.00%
33 ms
83 ms
35 ms
21/01/2014 01:00
21/01/2014 01:17
1000
1000
0
0.00%
33 ms
72 ms
35 ms
21/01/2014 02:00
21/01/2014 02:17
1000
1000
0
0.00%
33 ms
66 ms
35 ms
21/01/2014 03:00
21/01/2014 03:17
1000
1000
0
0.00%
32 ms
91 ms
34 ms
21/01/2014 04:00
21/01/2014 04:17
1000
1000
0
0.00%
33 ms
73 ms
35 ms
21/01/2014 05:00
21/01/2014 05:17
1000
1000
0
0.00%
33 ms
75 ms
35 ms
21/01/2014 06:00
21/01/2014 06:17
1000
1000
0
0.00%
33 ms
88 ms
35 ms
21/01/2014 07:00
21/01/2014 07:17
1000
1000
0
0.00%
34 ms
733 ms
36 ms
21/01/2014 08:00
21/01/2014 08:17
1000
1000
0
0.00%
33 ms
378 ms
38 ms
21/01/2014 11:00
21/01/2014 11:17
1000
1000
0
0.00%
32 ms
404 ms
36 ms
21/01/2014 12:00
21/01/2014 12:17
1000
1000
0
0.00%
33 ms
220 ms
35 ms

I assume that the Vodaphone box connects via an Ethernet cable?
Which port do you have it plugged into, as there are issues with the Gigabit ports, where packets are lost due to auto-negotiation issues on the Ethernet link.
The Ethernet link pulses on some hardware devices, get corrupted, causing the Gigabit ports to keep swapping between 1Gb and 100Mb, this results in packet loss.
This can be overcome on a computer, by setting the network card to 1Gb Full Duplex, and not Auto Negotiate.
I doubt that this option is available on the Vodaphone device.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems with XMLType and namespace

Dear subscribers:
I have been using XMLType successfully with simple XMLs - without namespaces. Now I must handle messages with "xmlns" and it seems XMLType is failing.
I tested the following XML, extracted from w3c.org examples:
<?xml version="1.0"?>
<bk:book xmlns:bk=''urn:loc.gov:books''
xmlns:isbn=''urn:ISBN:0-395-36341-6''>
<bk:title>Cheaper by the Dozen</bk:title>
<isbn:number>1568491379</isbn:number>
</bk:book>
The result of xmlt.getRootElement() is book.
However, the use of xmlt.extract( 'book' ) returns an empty object:
xmlt1 := xmlt.extract( 'book' );
dbms_output.put_line( 'StringVal: ' || xmlt1.getStringVal() );
ORA-30625: method dispatch on NULL SELF argument is disallowed
The following usages also raise errors:
xmlt1 := xmlt.extract( 'bk:book' );
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00601: Invalid token in: 'bk:book' ORA-06512: at "SYS.XMLTYPE", line 111
xmlt1 := xmlt.extract( 'bk::book' );
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00601: Invalid token in: 'bk::book' ORA-06512: at "SYS.XMLTYPE", line 111
xmlt1 := xmlt.extract( 'book', 'bk' );
ORA-31013: Invalid XPATH expression ORA-06512: at "SYS.XMLTYPE", line 119
I am using Oracle version 10.2.0.1.0. Had someone also faced this problem?
The code I used to test is at the end of this message.
Thanks in advance
====================================
DECLARE
xml varchar2(32000);
xmlt XMLType;
xmlt1 XMLType;
root varchar2(3000);
BEGIN
--Example from w3c.org
xml := '<?xml version="1.0"?>
<bk:book xmlns:bk=''urn:loc.gov:books''
xmlns:isbn=''urn:ISBN:0-395-36341-6''>
<bk:title>Cheaper by the Dozen</bk:title>
<isbn:number>1568491379</isbn:number>
</bk:book>';
xmlt := XMLType( xml );
root := xmlt.getRootElement();
dbms_output.put_line( 'StringVal: ' || xmlt.getStringVal() ); -- The XML is ok
dbms_output.put_line( 'Namespace: ' || xmlt.getNameSpace() ); -- Returns NULL
dbms_output.put_line( 'Root element: ' || root ); -- Returns book
dbms_output.put_line( 'Exists: ' || xmlt.existsNode('book') ); -- Returns ZERO
xmlt1 := xmlt.extract( 'bk:book' ); Raises error (see above)
xmlt1 := xmlt.extract( 'bk::book' ); Raises error (see above)
xmlt1 := xmlt.extract( 'book', 'bk' ); Raises error (see above)
--xmlt1 := xmlt.extract( 'book' );
dbms_output.put_line( 'StringVal: ' || xmlt1.getStringVal() ); Raises error
END;
/

If you put your XML into a namespace then you also need to extract from that namespace.... e.g.
No namespace...
SQL> select t.xml.extract('myroot')
2 from (select XMLTYPE('<myroot><mychild>test</mychild></myroot>') as xml from dual) t
3 ;
T.XML.EXTRACT('MYROOT')
<myroot>
<mychild>test</mychild>
</myroot>Put XML in namespace and now the extract returns nothing...
SQL> ed
Wrote file afiedt.buf
1 select t.xml.extract('myroot')
2* from (select XMLTYPE('<myroot xmlns="fred"><mychild>test</mychild></myroot>') as xml from dual) t
3 /
T.XML.EXTRACT('MYROOT')
--------------------------------------------------------------------------------------------------------Extract, specifying the namespace to extract from and now returns the result...
SQL> ed
Wrote file afiedt.buf
1 select t.xml.extract('myroot', 'xmlns="fred"')
2* from (select XMLTYPE('<myroot xmlns="fred"><mychild>test</mychild></myroot>') as xml from dual) t
SQL> /
T.XML.EXTRACT('MYROOT','XMLNS="FRED"')
<myroot xmlns="fred">
<mychild>test</mychild>
</myroot>
SQL>;)

Import problem due to Character set

I did an export of an entire schema using Original export utility(not Datapump) in 10G Release 1 (10.1.0.3.0). When i tried to import it. I got the error mentioned below. It is something to do with the character set. What settings do i have to give during import to bypass this Character set problem? After taking the export dmp file i deleted the Schema. So i all i've got is the export dmp file.
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing MOTORGM's objects into 'MOTORGM2'
. . importing table "SKU_DETAILS" 1872 rows imported
. . importing table "COMP_LLU_DETAILS" 1877 rows imported
. . importing table "SHIP_ROUTING" 0 rows imported
. . importing table "SHIP_ROUTING_CODE" 0 rows imported
. . importing table "AI_DETAILS" 103 rows imported
. . importing table "AI_DETAILS_BKP" 103 rows imported
IMP-00019: row rejected due to ORACLE error 12899.
IMP-00003: ORACLE error 12899 encountered.
ORA-12899: value too large for column "MOTORGM2"."CLASS_REC"(actual: 1017, maximum: 255)
Column1....
Column2....

-- db unicode charset
SQL> create table z_test_unicode (c varchar2(5));
Table created.
SQL> insert into z_test_unicode values('éèîàö');
insert into z_test_unicode values('éèîàö')
ERROR at line 1:
ORA-01401: inserted value too large for column
SQL> insert into z_test_unicode values('é');
1 row created.
SQL> select vsize(c) from z_test_unicode;
VSIZE(C)
3
SQL> insert into z_test_unicode values('éà');
insert into z_test_unicode values('éà')
ERROR at line 1:
ORA-01401: inserted value too large for column
SQL> drop table z_test_unicode
2 /
Table dropped.
-- db without unicode charset
Connected.
SQL> create table z_test_unicode (c varchar2(5));
Table created.
SQL> insert into z_test_unicode values('éèîàö');
1 row created.
SQL> commit;
Commit complete.
SQL> select vsize(c) from z_test_unicode;
VSIZE(C)
5
On possible solution to investigate for this kink of issue :
try to take a look at the init param : nls_lenght_semantics (by default set to Byte) --> to be changed to CHAR
SQL> show parameter semanti
NAME TYPE VALUE
nls_length_semantics string BYTE

Javac problem due to a wrong classpath - WHY?

Hi,
this is the initial part of my classpath:
luca@linux:~> echo $classpath
:/java/jdk/jre/lib/rt.jar:/java/jikes/rvm/2.3.0.1/rvm.classes:
As you can see the first entry is the rt.jar, while the second is a wrong path that leads to a directory tree where there are both classes and sources. In particular, under rvm.classes there is a structure similar to the java one, with the java directory, java/lang, etc.
With this (wrong) classpath, when I try to compile an application, the compiler stops due to problems compiling java.lang.Thread under rvm.classes. I've solved the problem inserting the right classpath in the second entry, but I'd like to know why the compiler asks me to compile Thread since it should be already available from rt.jar (which is the first entry).
Thanks,
Luca

You don't need to put rt.jar in the classpath, the compiler will automatically look there for classes. So perhaps you are confusing the compiler by putting it there. Take it out.

A problem due to a namespace conflict!!

Similar Messages

Maybe you are looking for