A problem with 5.1 speakers... HELP PLEA

I have reinstaled windows, next installed drivers from YouPAX to my X-Fi Fatalty. Now i have a problem, when i test speakers each is soundable but when i play music for example soundable are only front right and left... Whats going on?! In every configuration i have 5. speakers setted.

I had a similar problem recently and i made sure that i updated the soundcard drivers, directx and checked windows update for any new updates. I also scanned the pc for every known spyware, virus and adware! In the end the distortion went away, but of course because i had done so much i cannot say what the exact problem was. I do however feel that it was a driver problem and not a hardware one.

Similar Messages

Livedrive ir bay [problems with internal drive bay - help plea

i am also having issues with my li'vedri've ir bay, the line2 and mic2 ports are both seen on the volume mixer but they dont seem to work... i have only just recieved the sound card and dri've bay from a friend and as such i dont have the driver cd. i have looked on the drivers section on creative site but its not very clear what drivers i need i have downloaded what i thought was correct and the actual card works but not the dri've bay. i would appreciate any help.
thanks

use this cd.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Problem with inspire 280 speakers

well i own creative inspire 280 speakers but im having trouble with them. First when i connect it to some devices background electric noise appears when im not playing anything, then if I connect the jack till the end, the played sound will only be mono, the only way to play it stereo is if i dont put the 3,5mm jack till the end but it still shows some background noise. How can i solve this issue?

i have a similar problem with my 280 speakers.

Aduio problems with the mini! help!

I have serious audio problems with my Mini right now -- Please Help!
When I play iTunes, iPod, etc. I hear very bad static, and start and stops; like its an audio feed from the radio, a scratchy audo feed, that pauses.
At first i thought it was the old speakers that i run through the old display; but I plugged in Bose headphones to the mini itself and got the same bad, sound. this just started, can anybody help? thanks.

Check your Audio/MIDI Setup, making sure that your audio out settings are for 44.100khz, 2ch-16bit. I've seen some apps that arbitrarily change it to 1ch-8bit, which can cause the poor sound you're describing.

I have a problem with my microphone, please help if you can

Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.

Originally Posted by tav2000
Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.
Hi tav,
While waiting for other forum members to post..
Perhaps you havent installed the latest drivers yet? (link HERE)
Cheers!

Bought a 2nd hand iphone4. On the screen it shows "Connect to itunes" after connecting it shows in my itunes "There is a problem with your iphone" Pls help me what to do next? Thanks

Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.

It's probably broken. Is there an error number displayed by iTunes?

Printing problem with Photoshop cs4, need help

I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2. I CAN print from other programs such as TextEdit or Pages. And my printer prints a test page without any problems. However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it. Does anybody know the reason for this?? Thank you for your help.

I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon.

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

I'm still having problems with XUL Runner - please help am getting desperate!

I recently sought help over a problem I am having with FF. When I try and load it, I get a message telling me that XUL runner 1.9.2.11 is not compatible with 1.9.2.12. The advice I received was to do a clean install. I have done this a number of times - using the Uninstall option in Control Panel as well as running the uninstall utility in the Firefox program folder. Each time I reinstall, and get the same problem. The only difference is that a few days ago I was installing FF 3.6.10, and that gave the error message that XUL runner 1.9.2.11 was not compatible with 1.9.2.10.
I have FF set as my default browser, so when I click on links in e-mails, etc. I get the same failure to load symptoms. However, I found by chance that FF works OK in conjunction with System Mechanic 10 - a maintenance utility I have on my machine. If I select the on-line help option from that Menu, FF loads and runs OK. I can open new tabs and have no problem loading other pages. However, even with FF open, if I click a link in an e-mail, I get the XUL Runner error message.
Although not all symptoms are the same, I am also having problems with IE8. When I run the program it loads, shows a 'connecting' message in the tab header, then closes. If I uninstall FF, then System Mechanic selects IE8 as the default browser, and as with FF, loads OK.
Chrome and Safari both run OK (thankfully). there must be someone out there who knows what this all points to - is that person you?!
Note: Trouble shooting information retrieved using FF when opened with System Mechanic.

If you have such problems then you need remove the Firefox program folder before installing a new copy of the full Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

Problem with A300, Ask for help

Hello from Bulgaria!
In the beginning I want to apologize if I bother you at the wrong place. This was the only place i found in all your sites at "Contact us" menu. If I'm in mistake please redirect me to the right e-mail or topic.
I have extremely big problem with one of your products, and I'm afraid I can't solve him without your help. Few months ago I bought a laptop witch exact model is TOSHIBA SATTELITE PRO A300 - 1GQ. Model No.: PSAG1E - 00900NF3, Serial No.: 88549776Q. If you need another information I can tell you everything. Badly i got serious virus and the situation reach fall windows start. I know about integrated Toshiba Recovery and I used it. Windows Vista was successfully installed but the partion was not formated. Some of the system files was still corrupted and I resorted to Toshiba DVD comming with the laptop. I ran it, there was no problems until I saw Windows XP logo. I was pretty surprised because I expected Windows Vista like original one which came with the laptop from the shop. Another problem was that that installation formated whole HDD including partitions different from C:\ with Windows system files. All of my data is gone without I could be able to do something. However, th
e question is that I need Windows Vista very badly and I dont want XP. I tried to use hidden partition with Toshiba recovery again but I cant no longer access it. So I left with original XP with drivers integrated with it. The problem is that I need Vista with integrated drivers. It wouldn't be hard also if I found that drivers in your sites. Nowhere in your sites with download I could find the exact model to take it. The nearest was A210 which I think is pretty far from mine.
And it the end I ask for help if you can tell me where to download the needed drivers or anyway to put Vista back. Preliminary I thank you and I apologize again for the disturbing. I need that information badly and I don't know where I can get it from. At least show me valid e-mail to contact with Toshiba Support.

Satellite Pro A300-1GQ
This was the only place i found in all your sites at "Contact us" menu. If I'm in mistake please redirect me to the right e-mail or topic.
These forums are for United States computers. For that European machine, you probably want to post elsewhere.
Toshiba Support Forums Europe
You need to obtain a recovery disc that restores the hard drive to factory-new.
-Jerry

Problem with Creative M4500 speakers

Hi,
This is Raj. I bought creative M4500 model speakers. I am facing a very peculiar problem with these speakers.
When I connect the plug to the plug to the pin, The audio comes fine with out any problem but suddenly after 5 mins or so, I see that audio is stopped from the speakers, When I check if there is power supply to the speakers, near teh volume controllers I see that the Green buld is blowing which means that there is power supply but there is no audio. When I remove the plug and put into the pin carefully again the audio comes fine.
You may doubt that the pin may not be good or some loose contact, The power pin is perfectly fine, because when I connect any other device(cell charger and external HD power) to the same pin they work with out interruption. More over I aleays see the green light near the Volume controller always on.
I used to think that this is a small problem, but this problem is so irritating that I wanna get rid of this problem as soon as possible.
Can any one advise what could have gone wrong and suggest me any solution to get rid of this problem.
Thanks alot.
Raj Kumar

Hi,
No This does not happen all the time. This comes intermittently. Something like once in a couple of days. But once the problem rises it does not settle for 2-3 hrs, irritates like anything.
I purchased it from the local store. How ever I need to find a service centre @ my place to get some resolution for this.

Sony Liveview problem with battery drain!Help

Please help, i have just bought Liveview, i charged full for 4h, when i connected, battery drain very fast in 3 - 4 minutes when i use plugins after that Liveview turn off?? Please help me how to fix ít, i can't use ít , i think it have a problem with firmware! I use Xperia ion ics 4.0.4

If the battery is only lasting 10 mins I would advise returning this particular device so that it may be assessed.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Having problems with USB cable, please HELP!

While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
Is there anybody out there who can help me?!
Please!
Cheers!

Go to Options -> Media Card -> Mass Storage Mode Support: On
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Jpl problems with the lombard please help........

It takes 1+1 starts (the last time) or 111 before and 11+1+1+11 another.
But it will start up and it run well in 10.4.8 sometimes it crash (lately since the problem start never before) but other wise runs good.
I have looking into your other similar threads and don't since to unhesitant them well maybe mine is different i hope so.
Another thing they all end up on the logic board no before going to the OS 9 test(?) I may right.
Also my battery don't take charge anymore never used that much but is good to have it.
I hope you have the time to look at this thread and help me.
And happy New Year to you and all of you too.
nhylo

nhylo,
Unfortunately this error message is not good news. A common problem with Lombards is a failure of the L2 cache (cache memory) located on the microprocessor card. The 512K L2 cache will often appear/disappear in the System Profiler but nonetheless is still bad. The only fix is a replacement microprocessor card.
http://docs.info.apple.com/article.html?artnum=51159
As far as starting up, usually pressing the power manager reset button on the back panel will allow a successful start.
When you buy a replacement, you must make sure it can run OSX with memory in the top slot. Frankly I don't know how you can be sure of this except to purchase the card from a vendor who guarantees his product.

A problem with 5.1 speakers... HELP PLEA

Similar Messages

Maybe you are looking for