A query on the charge codes
Currently we are using terminologies "Sender" and "Receiver" for the charge codes in Duet. Is it OK if we replace the terms Sender and Receiver with the following.
Sender: Debited from
Receiver: Credited to
Are these new terminologies OK in the FICO. If not, can you please suggest a new one.
Thanks,
Veera
Accounting principles Debit the receiver and Credit the Giver (sender). The terminology would be contradicting the fundamental principles of accounting.
Similar Messages
-
To Find the SAP Query from the tranaction code or the program name
Hi,
I have a situation wherein I have to modify the sap query associated with an transaction code.But the problem is that I am unable to find the SAP Query.
<b>Please let me know how to find the SAP query from the transaction code or the program name.</b>
Thanks and Regards,
RupeshHi Rupesh,
1 use FM
RSAQ_DECODE_REPORT_NAME
2. This is one of the best and easiest way.
3. It will provide u the following info.
WORKSPACE
USERGROUP
QUERY
CLIENT
4. Thru TCode U must know the program name first.
This can be discovered using SE93.
Hope it helps.
Regards,
Amit M. -
Query using the SQL 'go' command on a JAVA code
Hi,
I am trying to create a new database on MS SQL and at the same time verify whether the data base exist already and then add a new table. The query statement works well on the query windows on MS SQL, but when the query is place using a JAVA code it gives the following error:
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'go'.
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'go'.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.executeQuery(Unknown Source)
at DataBaseCreator.main(DataBaseCreator.java:30)
I have to add that if I only query: "CREATE DATABASE NameOfDatabase" the new data base is created without a problem using JAVA, but when I try to use the following query, I got the error message.
"USE Master "
+ "IF EXISTS (SELECT * FROM SysDatabases WHERE NAME='DatesTemps') "
+ " DROP DATABASE DatesTemps"
+ " go "
+ " CREATE DATABASE DatesTemps22 "
+ " go"
+ " USE DatesTemps "
+ " CREATE TABLE Fable ( "
+ " FableID INT NOT NULL CONSTRAINT FablePK PRIMARY KEY NONCLUSTERED, "
+ " Title VARCHAR(50) NOT NULL, "
+ " Moral VARCHAR(100) NOT NULL, "
+ " FableText VARCHAR(1536) NOT NULL, "
+ " BlobType CHAR(3) NULL DEFAULT 'doc', "
+ " Blob IMAGE NULL DEFAULT NULL )"
If it is useful my complete code is the following, I appreciate in advance your comments.
import java.sql.Connection;
import java.sql.Statement;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
import java.util.*;
import java.util.Calendar;
import java.util.GregorianCalendar;
public class DataBaseCreator {
public static void main (String[] args)
Connection Time =null;
Statement stmt = null;
String data = "jdbc:odbc:DataBaseCreation";
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Time= DriverManager.getConnection(data,"","");
stmt = Time.createStatement();
//String query;
//java.sql.Timestamp ts1 = new java.sql.Timestamp(((3*60)+58)*60*1000);
// System.out.println(ts1 + " This is a Time Stamp");
ResultSet rec = stmt.executeQuery(
"USE Master "
+ "IF EXISTS (SELECT * FROM SysDatabases WHERE NAME='DatesTemps') "
+ " DROP DATABASE DatesTemps"
+ " go "
+ " CREATE DATABASE DatesTemps22 "
+ " go"
+ " USE DatesTemps "
+ " CREATE TABLE Fable ( "
+ " FableID INT NOT NULL CONSTRAINT FablePK PRIMARY KEY NONCLUSTERED, "
+ " Title VARCHAR(50) NOT NULL, "
+ " Moral VARCHAR(100) NOT NULL, "
+ " FableText VARCHAR(1536) NOT NULL, "
+ " BlobType CHAR(3) NULL DEFAULT 'doc', "
+ " Blob IMAGE NULL DEFAULT NULL )"
catch( Exception e )
System.err.println( e );
e.printStackTrace();
finally
try
stmt.close();
Time.close();
catch( Exception e )
System.err.println( e );
}Ok, first of all thanks for your answer, now what I want to do is the following:
1) I need to input ((retrieve) every minute some data (Date and Temperature), that I will get from and external device, this is not part of this code.
2) I want to store that data (Date and Temp) on a data base, here where I need the command to create the data base and to verify whether that data base already exists. In case it has already been created then create new table(s) on it. If it doesn't exist then create and then create new tables.
3) Each Day (at yyyy mm dd 00:00:00:000 will create a new table, and the name of this table will be yyyymmdd.
4) Then every minute the java code will retrieve the data and add it to the table in the data base.
5) That will be a close loop that will be running until the user interrupt it.
I haven't make the communication code yet, in order to test my code I was thinking to retrieve the data from another data base. This would be just to verify that the JAVA sequence is able to retrieve the data every minute and create new data base and tables.
For the record I am able to send the queries and retrieve information from SQL running the code in eclipse, that will cover your first observation.
I am quite new in the forum I am sorry I didn't get the use of code tags.
Sorry again as I said I am quite new on this, what's a DDL statement.
Thanks. -
In a query, for the selection field 'KNB1-ZWELS' a match-code isn't availab
Hi All,
Creating a query, for the selection field 'KNB1-ZWELS' a match-code isn't available.
Could anyone tell me the reason?
Thanks
GandalfHi,
Match Code Object is not available for the field ZWELS. If required, You need to contact a Developer for creating one . -
Unable to debug/correct the CMOD code for a variable used in a query
unable to debug/correct the CMOD code for a variable used in a query
i am using the data in a DSO in a query and using a custom coding variable in that query , but this data not coming in that query ..
can anyone suggest how to debug that cmod code for the variable?
code is written in CMOD tocde for the variable.belowis the code that i have written for a custom coding for a variable
*******Start***
IF i_step = 2.
CASE i_vnam.
WHEN 'IC_COMPCD'.
TYPES: BEGIN OF gt_itab_DyAuthTable,
username TYPE /bic/afiop_o1200-/BIC/IC_USER,
companycode TYPE /bic/afiop_o1200-COMP_CODE,
END OF gt_itab_DyAuthTable,
BEGIN OF gt_itab_Cocd_all,
companycode TYPE /BI0/MCOMP_CODE-COMP_CODE,
END OF gt_itab_Cocd_all.
DATA: gi_itab_DyAuthTable TYPE STANDARD TABLE OF gt_itab_DyAuthTable,
wa_itab_DyAuthTable TYPE gt_itab_DyAuthTable.
DATA: gi_itab_Cocd_all TYPE STANDARD TABLE OF gt_itab_Cocd_all,
wa_itab_Cocd_all TYPE gt_itab_Cocd_all.
SELECT /BIC/IC_USER
COMP_CODE FROM /bic/afiop_o1200
INTO CORRESPONDING FIELDS OF TABLE gi_itab_DyAuthTable
WHERE /bic/ic_user = sy-uname.
LOOP AT gi_itab_DyAuthTable INTO wa_itab_DyAuthTable.
IF wa_itab_DyAuthTable-companycode EQ '*'
OR
wa_itab_DyAuthTable-companycode EQ ' '.
SELECT COMP_CODE FROM /BI0/MCOMP_CODE
INTO CORRESPONDING FIELDS OF TABLE gi_itab_Cocd_all.
LOOP AT gi_itab_Cocd_all INTO wa_itab_Cocd_all.
l_s_range-low = wa_itab_Cocd_all-companycode.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDLOOP.
to exit the loop if any one value is */space/all for a user's compcode values
EXIT.
ENDIF.
ENDLOOP.
if control is here means, the comp codes values didnt have */space
LOOP AT gi_itab_DyAuthTable INTO wa_itab_DyAuthTable.
l_s_range-low = wa_itab_DyAuthTable-companycode.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDLOOP.
Endcase.
Endif. -
Need help regarding report ( i need the transaction code copy of the query)
Hi,
I want to copy the query designer fields and those field i have to use another query for that can any one give me the transaction code for copy query
thanks
phanidharRSZC = to coy quer from on infoprovider to another..
HOpe it helps
Thanks for points assigned -
i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?
Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should. -
I downloaded an ebook and a free redemption code but my credit card got changed. How can I have the charge removed?
Did you enter the code when buying the book ? If you did, and you were also charged for it, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
ipad2 shut off after down the battery but when i connect the charger with my ipad2, its not storing the power in the battery and i also not finding the error code ???
If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options. -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
FBL3N Report -not able to get all the transaction code details
Hello,
when FBL3N report ran for one the expenses account (time paid off - project charges account) , only few line items are displaying the transaction code like CJ88 and CJ8G.
can you please tell me why all the line items are not showing the transactions codes and is there any know situation when the T- codes are not displayed.
What I need to do, to get all the T- codes in the report ?
I really appreciate your help.
Regards
RadhaI know it is a line item report and I was expecting to see the transaction code details in the report for every line item. But in I'm not able to see all T- codes for all the line items
Thanks
Radha -
How to call a query from the backing bean ?
Hi all,
Another question for you guys :
I made a jspx page with an input form and a submit button.
When I click the submit button, the action my_action in my backing bean is executed.
This is the code :
public BindingContainer getBindings() {
return BindingContext.getCurrent().getCurrentBindingsEntry();
public String my_action() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("EmployeesView");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
I hoped that the query 'EmployeesView' was executed in this way, but I get the following exception :
java.lang.ClassCastException: oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding cannot be cast to oracle.binding.OperationBinding
So how should I execute the query EmployeesView ?
Second part of the question : What if I typed the name an employee in my form, and I want to
execute a query that selects all the Employees with that name ?
How do I make a query with a variable as input in the WHERE clause ?
Thanks in advance.
Edited by: Facehugger on 7-apr-2010 11:15I'm still trying all the stuff you guys says, but still no result.
This is my backing bean :
+// the button action+
+public String my_action() {+
+// get the selected rows from the multiselect table and store the objectid's in an String array+
RowKeySet rks = graph_table.getSelectedRowKeys();
Iterator itr = rks.iterator();
Object key;
int nbr_objects = 0 , i = 0;
if (rks.size()>0) nbr_objects = rks.size();
+String[] objectid = new String[nbr_objects];+
while(itr.hasNext())
+{+
key = itr.next();
graph_table.setRowKey(key);
Object o = graph_table.getRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding) o;
Row row = rowData.getRow();
+objectid[i] = row.getAttribute("Objectid").toString();+
i+;+
+}+
+// now get all the x and y values for these objectid's from the database out of the table history.+
BindingContainer bc = BindingContext.getCurrent().getCurrentBindingsEntry();
for (int j=0 ; j<nbr_objects; j+){+
+// get X and Y values for object number j+
DataPoints history = new DataPoints();
OperationBinding operationBinding = bc.getOperationBinding("retrieveHistory"); ===> operationBinding stays NULL ???+
+operationBinding.getParamsMap().put("OBJECTID", objectid[j]);+
Object retVal = operationBinding.execute();
+// ==> retVal should contain a List of all X and Y values for the provided objectid.+
+// while (retVal has values)+
+// {+
+// List_of_x_values.add(retVal.valueX);+
+// List_of_y_values.add(retVal.valueY);+
+// }+
history.add(List_of_x_values);
history.add(List_of_y_values):
+// call the soap method to do some calculations+
methodname.forecast(history);
+}+
+}+
In my application module :
public void retrieveHistory(String objectid) {
getHistory().setWhereClause("OBJECTID = '" + objectid + "'");
System.out.println("current query : "+getHistory().getQuery());
getHistory().executeQuery();
public ViewObjectImpl getHistory() {+
return (ViewObjectImpl)findViewObject("History");+
The query for the VO History : SELECT * FROM HISTORY
Please anyone ?
Edited by: Facehugger on 9-apr-2010 14:19 -
How to load a Query in the bne_stored_sql in WEB ADI table.
Hi folks ,
I have a unique requirement as follow.
I have created an VIEW , which is given in the Download WEB ADI integrator defintion.
I am trying to query this view based in few search conditions thoughr a CO code. I am not used any time loading the Query in the bne_stored_sql table to achieve such funcaitonality.
Please folks any inputs on this would be greatly appricaited.
Thanks and Regards
RaghuHi,
I am creating the layout for a sales order which will be send to a customer.
In that order the customer can see the payment conditions.
It should look like this:
net price: 1000,00 EUR
19,00% taxes: 190,00 EUR
gross price: 1190,00 EUR
payment conditions:
payable within 30 days net: 1190,00 EUR
payable within 14 days with discount of 2 %: 1166,20 EUR
to get the bold marked digits I need to have access on the following tables:
OCTG and CDC1
In the OCTG table I get the days (in this example 30)
In the CDC1 table I get the days of cash discount and the percentage (in this example 14 and 2)
but in the sales order layout in PLD only the OCTG table is shown when I create a database field and the CDC1 table isn't.
So what can I do to get this? -
Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your timeThis is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.
-
Error in the ABAP Code for Customer Exit Variable
Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
ThanksCase ZVWKNO. "write this with out comments
When '1'. "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0. "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas
Maybe you are looking for
-
HT204088 my ipad shows it is disabled,how can i get it back to normal.
My ipad shows it is disabled,how can i get it back to normal
-
I recently bought a Netgear Wireless Access Point to use in the office so we can have a wireless network. I configured the wireless network, and I am currently connected to the internet. However, I no longer can access the shared files on the Windo
-
I have a Late 2011 Mac Book Pro 17" and I want to install a Samsung 840 EV 2.5 1TB. What accessories if any do I need? I want to place my order once with all that is needed to install this equipment.
-
Send PO via rfc XML with BC 4.7
Hi Gurus, I have to send the Purchase Order to vendor via rfc XML with business connector 4.7. The vendor should receive the order via ebp XML. We are not using XI we use xCBL. SRM Server 5.5 Standalone. i use zbbp_PO_send_xml badi for this purpose.
-
Good morning. I´m installing oracle SOA suite 10g in Ubuntu. I recieve the following error: /usr/bin/ld: cannot find /usr/lib/libc_nonshared.a collect2: ld returned 1 exit status make: *** [trcroute] Erreur 1 Arrêter la sortie à partir du processus g