A question about accessing elements of dinamically created components

hi, I've created a component called User_Tab. This has a
label inside called "label_IDUser";
Now, the problem is that when I dinamically instantiate the
component (on the root), It seems that I cannot change the text
property of the label:
//inside a cicle for (for a=0;a<3;a++){
this.attachMovie("User_Tab", "mc_UserChannel"+a,
this.getNextHighestDepth(), {_x:x_Pos, _y:y_Pos});
this["mc_UserChannel"+a].label_IDUser.text = "Hello";
//end cicle for
If i trace the property for the first movie
trace("ECHO:" + mc_UserChannel0.label_IDUser.text); //
I get the expected result. But this result DOES NOT DISPLAY
IN THE MOVIE (which gets attached but whose label remains empty)...
Thanks in advance!
Davide

No, no mask...the problem seems to be that I cannot reach the
object...If I drag the object "User_Tab" on the stage instead of
using attachMovie to create it dinamically, it works...When I use
attach movie, it does not. But i have to put that object on the
stage dinamically.

Similar Messages

Question: about accessing Nik collection through Lightroom

I have recently purchased and installed Nik collection. I have no problem reaching the plug-ins in Photoshopbut can't in Lightroom (except for HDR)

Thanks! Technology senses my fear and always makes it difficult for me! Ha! I can use the Nik programs so if I have to, I'll work on them there.
Date: Sat, 13 Apr 2013 16:27:45 -0700
From: [email protected]
To: [email protected]
Subject: question: about accessing Nik collection through Lightroom
    Re: question: about accessing Nik collection through Lightroom
    created by trihelm2 in Photoshop Lightroom - View the full discussion
I suspect there are potential issues on some systems with the Google "combined" version, when I installed it I had recieved a copy of the Google complete version free because of my purchase history. I was advised that I could install over the Individual Plugins I had. I never got as far as trying it with Lightroom, only in Elements. The plugins appeared but the load times were abysmal and I mean realy bad , far longer than the Nik individual Installs, so I dumped it and reverted to the originals. Pity cos I wanted the Sharpen Plugin that I have'nt got. After reverting all was back to normal The Nik individual Plugins load very quickly. It was this that convinced me there is a difference in the Google setup.There are people on here with far more knowledge than me, hopefully one of them can help you, alternatively you might try asking Google for help with this.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5232723#5232723
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5232723#5232723
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5232723#5232723. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Question about DBCA generate script o create RAC database 2 node cluster

Question about creating two node RAC database 11g after installing and configuration 11g clusterware. I've used DBCA to generate script to create a rac database. I've set
environment variable ORACLE_SID=RAC and the creating script creates instance of RAC1 and RAC2. My understanding is that each node will represent a node, however there should only be one database with a name of 'RAC'. Please advise

You are getting your terminology mixed up.
You only have one database. Take a look, there are one set of datafiles on shared storage.
You have 2 instances which are accessing one database.
Database name is RAC. Instance names are RAC1, RAC2, etc, etc.
Also, if you look at the listener configuration and if your tnsnames is setup properly then connecting to RAC will connect you to either one of the instances wheras connecting to RAC1 will connect you to that instance.

Questions about Access Manager tutorials available in netbeans site

Hi
Thank you for reading my post
I have some questions about two tutoral which i find in :
http://www.netbeans.org/kb/55/amsecurity.html and
http://www.netbeans.org/kb/55/amsecurity-liberty.html
here is my problem :
we have some web services, now we want to have authentication applied for consumer who try to access our web services.
we need to have most possible flexibility because we may deploy the server for a customer with an already established Identity database ( Database Table with user details)
Also we need to have Transport level security using SSL.
I read and studied both of them and now i have some questions :
-I think Securing Web Services Using the SAML or UserNameToken is what we need for authentication and autorization of web service consumers?
is that right?
-Does Sun Java System Access Manager provide flexibility to authenticate user/password with a database table content?
-How we can apply roles in Sun Java System Access Manager when we authenticate users ?
Thanks

Imagine that we want to have an end to end security for our web services
we thought that we could use message level encryption to protect the soap message and also we should protect our web services from un-authenticated acess,
we will use userName token for this.
Our customer has large database which contains many user/password and role of those users.
some of web services should be available to higher role (manager) and not for all users.
so we should check a user role before we allows him/her to access a web service.
my question is whether Sun Access manager can help us with this? or there are other configuration or packages that we should apply to have this feature.
to explain more :
our client side is a swing application, users enter username/password to login into system. after they loged in, we send user/pass every time user want to request some data from some services. (is it good to send user/pass every time?)
We want Sun Access Manager to handle users authentication .
We also need to handle role related authorization, can Sun access manager handle this?
Thanks

Question about SAP client setting when create new connection in CR2008

Dear All,
I have a question about SAP client setting in Crystal Report 2008 when I try to create a new connection use SAP OpenSQL(SAP Table,Cluster,or Function).
I have a SAP IDES environment with 5 clients.
While I try to create a CR standard report use SAP OpenSQL, I entered 800 into Client field in u201CUser logon credentialsu201D. The connection can be created and I can get table list. After I built a report ,I can not get data from IDES client 800, but I can get data from client 000.
I am sure client 800 has data.I checked client 800 table with Tcord se16.
I also did other tests and felt confused a lot.
Even inexistent client, such as u201C00u201Dand u201C8000u201D can be used for creating connection.
I just want to know how can I get data from client 800.
Thanks for your kindly help!
Wayne

Dear Ingo,
Thanks for your reply!
I am not sure about your suggestion clearly. What's your mean all the authorizations to use CR?
Maybe I should clarify my operations.
I logon CR2008 as administrator and created two SAP connections with different client.
There is a table named "/BEV3/CHBALLG" be showed in these connections.
I checked clients "000" and "800" both have data in the table.
I can use client 000 connection create report and get right data, but the report base on client 800 connection could not get data.
If change to another table,such as "/SAPDMC/LSOFIL", I can get data both form these connections.
I found one thing is very weird. Client "00" and "8000" do not exist in my IDES environment, but I can use them for creating connection.
May I have your further suggestions?
Wayne

Question about swapping Hard-Drives/Creating Recovery Discs

I have a laptop, Toshiba Satellite C655-S5082, with Windows 7 Home Premium 64-Bit OEM Operating System already installed on it so it did NOT come with an Installation or Recovery disc.
My problem here is two-fold... First I would like to change the hardware on the PC by changing Hard-Drives from the one that came with the laptop to a large capacity one however since the laptop came with the Operating System already installed onto it I can not install it onto the new Hard-Drive (which for all further purposed we will call Hard-Drive B) now I thought that I could create the recovery discs using Toshiba's Recovery Media Center to create the 4 DVDs however I do not even know if this will help at all since Hard-Drive B does not have a recovery partition on it.
This however is where my second problem comes into play, when I try to create the recovery discs using the Recovery Media Center I insert the DVD and begin the burning process, however about 75% of the way through the first disc the program slows down and a window pops up asking me if I would like to open the disc with Windows Explorer as if it has just recognized the disc again, I exit out of this and it comes up a few minutes later with an error code of 020150-20-0000000 and a message stating it can not read a file located within the ZZImages directory and then crashes, freezes and I have to end the process via the Task Manager then eject the disc via Windows Explorer 'My Computer' link.
As you can see my problem is two fold so my questions to the Toshiba Support Team/Administration are...
1. If I insert the new HDD into the laptop and begin using the recovery discs created via the Recovery Media Center will it be able to install the OS to that HDD and allow the OEM Product Key to be used to verify the OS?
2. If I can do the above process how do I fix the Recovery Media Center application from crashing and effectively ruining my DVD's, so that I may create the proper recovery dics?
3. If I can't do the above process due to the Recovery Partitions not being located on that new Hard Drive is there a way to copy and or transfer that Recovery Partition to the new Hard Drive so that the recovery discs do work?
4. If neither of the above processes work will Toshiba be willing to send me a Windows 7 Home Premium 64-Bit OEM Installation disc via the mail or the .iso/.img file of the disc via e-mail so that I may burn them to a disc myself and install the OS onto the new Hard Drive?
I do have the appropriate Product ID/Product Key for the OEM OS as well as the Serial Number of the specific laptop itself. Please get back to me as soon as possible. Thank you!

Satellite C655-S5082
create the recovery discs ... comes up a few minutes later with an error code
This sometimes occurs because of the media. Try using a disc from a different source.
Follow the instructions in the section Creating recovery DVDs/media, which begins on p. 68 of the User's Guide.
Satellite C640/C650 Series User’s Guide
I do not even know if this will help at all since Hard-Drive B does not have a recovery partition on it
It doesn't make any difference what's on hard drive B. All of it will be replaced.
For this, see the section Restoring from recovery DVDs/media, which begins on p. 71 of the User's Guide. You want to recover to "out-of-box state."
After you have restored to the new hard disk, it will contain everything that the original had, including even all the recovery partitions. So you will even be able to burn recovery discs again from the new hard drive.
..the OEM Product Key
The version of Windows which is restored (not installed) to the new hard drive is pre-activated. You won't need to fool around with the product key.
..will Toshiba be willing to send me a Windows 7 Home Premium 64-Bit OEM Installation disc
If all else fails, you can always order recovery discs from Toshiba directly.
Order Toshiba Recovery Media
Your questions indicate that you do not understand the procedure above. If my explanation is insufficient, please feel free to ask for clarification.
questions to the Toshiba Support Team/Administration
One more thing. There are no Toshiba support folks here. We are all users just like you.
-Jerry

The question about cost element

business scenario:
1,now create a blended activity type rate that includes three costs(water + electricity, etc...). That way, when confirm an activity, it have all the costs taken care of. However, here three costs will goto a single cost element.
question: after confirmation, how to translate the cost into original three cost element?
Please explain me all the steps to be required.
Thanks in advance!

Use Costing sheet to book the cost of Water, Electricity etc. to different Cost Elements.
1. T.code: OPL1, select the costing variant that has been mantained in the T. Code OPUV "CstgVariantPlan".
2. Go to the valuation variant in control tab of the costing variant.go to the overhead tab and click on the costing sheet.
3. Inside the costing sheet select the costing sheet and check the base for that costing row. Here you ca see that the cost element range or the Groups are mentioned so any cost that is hitting these cost elements will be used for the calculation of the overhead and that will be calculated and distributed based on the overhead rate and the will be loaded on the credit cost element.
Reward points if helpful.
Venkat

I have a question about photoshop elements 11

can i create templates on elements 11 of customize templates of skins on games with elements 11

I believe that Amazon (the actual Amazon, and not semi-affiliated merchents) WAS a certified Adobe reseller. However, with the CC (Creative Cloud), I am not sure about that any longer - others can verify their certification.
As CS 5 is discontinued software, I would NOT expect Adobe to be selling that version - anywhere.
Research ANY reseller, and very, very carefully.
Also, do gain the rights to manipulate and post ALL © material - that is not only smart, but also honest and ethical.
Good luck,
Hunt
PS - you might also want to explore two other, current Adobe programs: Photoshop Elements 11, and Premiere Elements 11. They are often sold in bundles, for about the MSRP on one. Together, they will handle most Still Image editing needs, and also Video creation and editing. They are both very inexpensive, but powerful programs.

Newbie question about Premiere Elements Organizer

This is a pre-newbie – let’s say “virgin” question. If there is an answer already posted elsewhere, please send me a link.
I’m about to install Premiere Elements 9 to do some clip editing and animation from still images. This would be my first attempt to edit clip or do some animation from still images, besides using Windows Media Maker with my HS students. However, I have been a pretty serious photographer for 20+ years with 1,000’s of images which I now work on in PS CS5 Extended and Lightroom 3. I use Adobe Bridge and LR library to catalogue and organize my images. I’d like to continue to use AB / LR Library to organize my new clips and projects. From reading Bill’s posts, it seems I can use Adobe Bridge, copy my original file, resize in Photoshop, and save in a new folder to use for a Premiere project. This would seem to be most intuitive way for me to work. I already have keywords, metadata, actions in PS… etc. But I think Bill is using Premiere Pro, while I’ll be installing Premiere Elements, which comes bundled with Elements Organizer. Do I need to install or use Elements Organizer? What are the advantages/disadvantages or EO? I guess I’m a little worried about installing the programs and having EO automatically acquire images using presets/defaults that I don’t want to use as well as issues with subfolders, etc. I'm running Windows 7.
Thanks
FYI- this is a great animation project
http://www.thejohnnycashproject.com/#/explore/TopRated

ziggycat4 wrote:
I guess I’m a little worried about installing the programs and having EO automatically acquire images using presets/defaults that I don’t want to use as well as issues with subfolders,
EO doesn't do much with the files themselves, just maintains links to the sources.
For folders you are best to use the folder view in EO to move them as it doesn't keep track of folder locations when changed in Windows Explorer. From the File options in Bridge I think that is pretty much the same.
ziggycat4 wrote:
I would like to get as much input as possible on the advantages/disadvantages of using EO vs say Adobe Bride from others who use Elements Organizer.
Any insights would be appreciated.
Can anyone who has used both EO and AB comment on how EO handles missing (hidden) files, syncing issues, computer hanging up or crashing....etc?
I've only messed around a little with Bridge. But to me it seems lightening fast by comparison to EO. The features Albums and Tags in EO seem much the same as Collections and Keywords in Bridge.
EO has Face Recognition abilities - getting more sophisticated in each version. I've not seen this feature in Bridge.
By default EO allows you to open a file in any of:
Photoshop
Photoshop Elements
Premiere Elements
A single used-defined application (I have mine set to ColorPilot).
Bridge only seems to link to Photoshop.
Missing files can be located manually or by allowing EO to search for them.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Basic question about accessing card reader from browser

Hi,
I am very new to card technology. I have a very basic and general question not directly related to java cards.
I need to write a web application that allows the user to read a card with a card reader.
For that I maybe need to write an applet that has to access a native DLL and call methods
to get the card ID. I already have that DLL (written in Delphi) that reads multi-technology cards.
Then pass that ID to the application server to retrieve complete information
about the card holder and display them on the user browser.
Please could someone guide me on useful resources for that kind of development, for example
already existing developments, personal experience, design solutions ?
Thanks.
Adriano

Hi Joseph,
One thing I forgot to tell is that I work with contactless cards and readers.
Contactless cards use radio frequency. Despite this fact, the problem stays the same. I already have a Delphi DLL that reads contactless cards.
What I need is a way to retrieve card holder information from a client browser. The card contains a unique ID. My idea is to use an applet that reads that ID on the client-side and then calls a servlet on the server-side to retrieve holder information associated with that ID, i.e. first and last names, and finally displays them on the client browser.
So the card contains only the unique ID, a database on the server-side contains all other related data.
Technically the applet has to call the DLL via JNI.
Do you think that using an applet that way is a good solution, do you see simpler solutions, is there security issues ?
Thanks.

Question about accessing CIFS with LUM user (permissions)

Hi there,
I have a question related to accessing a CIFS mount throught a user in a linux box.
First of all, its a system based in OES11 sp2 & SLES 11 SP3. I have a cifs mount
in /media/nss, with novell cifs, coming from a NSS Filesystem. This mount is mounted
with a username/password with password policy, etc. I have four users LUM-enabled,
in the Linux box, which should access the CIFS mount, but I have a permission denied.
I have set trustees for the primary group for the 4 lum-enabled users and also I have
addedd permissions for a group in the NSS volume, and add this group to the membership
of the users, but doesnt works.
I guess Im missing something or Im doing something wrong. Could anybody give me a pointer?
Thanks!

Antoniogutierrez,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Basic questions about Premiere Elements 8

I'm new to this forum and although I use Photoshop Elements extensively, I am just trialling Premiere Elements 8. I have a number of questions from my (very limited) testing so far:
1. Most of the videos that I download from my Sony DCR-DVD110 DVDs behave fine, but one of them only has half an audio track. The full audio was there on the DVD, but in the project it appears that the second half of the audio has been moved to overlay the first half, instead of following on. The video format is VOB. Has anyone else had this problem, or could suggest how it can be remedied?
2. I understand from the help that I can split incoming video from a DV camcorder using the timecode on the tape. However, I do not seem to get the same option when downloading from DVD as above. The scene-splitter in the project list only allows content detection (which is unreliable), or regular divisions. Does anyone know if there a timecode on the VOB files, and is there a way of using this to split video into clips that is more reliable than scene detection?
3. I do not understand the red/green line that appears under the Timeline ruler, just above the video. In one project, I have cleared clips out of the timeline and copied new ones in. The green or red line no longer changes at clip boundaries. Where it is green, the clip audio plays back, but not the video. Where it is red, both play. I do not seem to be able to find out what this means, let alone how to change it, and do not know how I set it in the first place. Does anyone know what this coloured line means, and how to change it so that all of the clips play both audio and video?
4. When I start the program from the Welcome Screen, it gives me the option of opening an old project. Even though I select the project that I wish to open, this does not happen. Premiere Elements 8 starts, but the project does not load. Is this just a limitation of the trial version, or a common problem? Can I skip the Welcome screen and go straight into Premiere Elements 8?
I'm looking to buy Premiere Elements 8 along with an upgrade to Photoshop Elements 8, for the compatibility and common file organiser, but so far the above problems are putting me off a purchase. The programme also does not seem to be as intuitive as Studio 7, which was the last video editing software that I used (some years ago, taking data from a DV camcorder).
Your help and any recommendations that you may be able to add would be most welcome.

Virtually all of your problems are related to your trying to edit video from a DVD camcorder. Although the program is supposed to be able to work with these video files, they can be very problematic if your computer's operating system is not fully updated, you lack the current version of Quicktime and you do not have the proper codecs installed.
The red lines you're seeing above your video on the timeline are indications of this. These are indications that your video needs to be rendered by the program in order for the program to work with it.
If you'd like to try to work with DVD cam video despite these liabilities, there are things you can do to improve performance somewhat.The FAQs to the right of this forum explain how and why.
http://forums.adobe.com/thread/415317?tstart=0
But I recommend you convert your VOB files to DV-AVIs before you bring them into Premiere Elements. This will likely remedy nearly all of your problems (assuming your computer's hardware and software are up to the necessary specs and are fully updated).

Questions about accessing Oracle9i Database Release 2

Hi
I'm new to this whole process. My question is how do I access the Application Development portion(SQL+). Do I have to subscribe to the OTN network in order to receive a username, password and host string, in order to log into the SQL Plus application. Is there any documentation that explains how I am able to access the Oracle 9i Database and all of its functions. What do I have to do in order to access The OTN network

This is fairly basic but it should get you to where you need: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a90842/ch1.htm
OTN

Question about Access database linking in SharePoint

I have a database table I created in Access 2010, I can get it into SharePoint as a list and then create a calendar view. I used the SharePoint icon under Database Tools in Access. My problem is that when I enter new information in the Access
Database I am not able to get SharePoint to reflect this update.
I should state that I am extremely rusty with Access and SharePoint.
I appreciate any help that can be offered and I thank you in advance.

Check out few synchronization options from the following link, hope it helps
https://support.office.com/en-us/article/Synchronize-a-SharePoint-2010-list-with-Access-2010-975bfb97-c799-4fce-b7cc-3db3b397f116
Cheers,

Question about Photoshop Elements 8

I am a new user and just downloaded the trial version of Photoshop Elements 8. I have Windows 7. When I go to Create/Slideshow I get the message "Phfotoshop Elements not responding? Can I correct this and if so, how?

Try reinstalling the application and see if this works.

A question about accessing elements of dinamically created components

Similar Messages

Maybe you are looking for