Question about Access database linking in SharePoint

I have a database table I created in Access 2010, I can get it into SharePoint as a list and then create a calendar view. I used the SharePoint icon under Database Tools in Access. My problem is that when I enter new information in the Access
Database I am not able to get SharePoint to reflect this update.
I should state that I am extremely rusty with Access and SharePoint.
I appreciate any help that can be offered and I thank you in advance.

Check out few synchronization options from the following link, hope it helps
https://support.office.com/en-us/article/Synchronize-a-SharePoint-2010-list-with-Access-2010-975bfb97-c799-4fce-b7cc-3db3b397f116
Cheers,

Similar Messages

Question about using database links in Forms 10g

I have a form that uses a database link for the "Query Data Source Name," i.e. it is set to some_view@some_db_link
For some reason when I run a query using the DB link the query takes approximately 30 seconds. When I remove the link and go local the query takes about one second. Has anybody observed and addressed this issue before (without going local of course)?
Thanks,
Thomas

Let me first say that it is never a good idea to use a db link in the data source. It is better to create a synonym in the database and use this as the data source. If the db link changes, you only have to do this in the database, without recompiling forms.
create synonym some_view for some_view@some_db_link
This may already solve your problem. If not, than see if the query is also slow in sqlplus. You may have a problem in your connection between the two databases.

Question: about accessing Nik collection through Lightroom

I have recently purchased and installed Nik collection. I have no problem reaching the plug-ins in Photoshopbut can't in Lightroom (except for HDR)

Thanks! Technology senses my fear and always makes it difficult for me! Ha! I can use the Nik programs so if I have to, I'll work on them there.
Date: Sat, 13 Apr 2013 16:27:45 -0700
From: [email protected]
To: [email protected]
Subject: question: about accessing Nik collection through Lightroom
    Re: question: about accessing Nik collection through Lightroom
    created by trihelm2 in Photoshop Lightroom - View the full discussion
I suspect there are potential issues on some systems with the Google "combined" version, when I installed it I had recieved a copy of the Google complete version free because of my purchase history. I was advised that I could install over the Individual Plugins I had. I never got as far as trying it with Lightroom, only in Elements. The plugins appeared but the load times were abysmal and I mean realy bad , far longer than the Nik individual Installs, so I dumped it and reverted to the originals. Pity cos I wanted the Sharpen Plugin that I have'nt got. After reverting all was back to normal The Nik individual Plugins load very quickly. It was this that convinced me there is a difference in the Google setup.There are people on here with far more knowledge than me, hopefully one of them can help you, alternatively you might try asking Google for help with this.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5232723#5232723
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5232723#5232723
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5232723#5232723. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Access 2010 Linked to Sharepoint online - avoid direct access to sharepoint stored data

Hello,
I have an access 2010 application (front end) connected to SharePoint online team site (as back end).
I wish to allow my users to work with the front end but to avoid direct access to the data on SharePoint Online.
The user will open the access application and it will auto connect & work with SharePoint online.
How can I implement this?
Thank you for your help

Hi,
According to your description, my understanding is that you want to use Access 2010 to connect the SharePoint Online data.
In Access 2010, you can connect the SharePoint list as a external datasource like the capture below. It will need to input url and user credentials to access SharePoint site in the wizard. If you want to connect automatically, you will need write some custom
Micro code to achieve it.
If you have some question about Micro code to connect SharePoint list automatically, I suggest you can create a new thread in Access Development, you will get more detailed information from there.
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=accessdev
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Question about import database pk, fk

Hi
I want to ask a question about imported database. I imported database and I noticed tables doesnt have Primary key or foreign key. They havent relation between eachs. Why can this occured ?
is it about import or another something?

yeah ı am surprised none of tables have pk or fk ..
but ı want to show you http://i51.tinypic.com/2hedc9d.jpg
what is blue shapes in there ?
can be foerign keys ?

A Question about LV Database Connectivity Toolkit

Hello everyone!
I have a question about using LabVIEW DataBase Connectivity Toolkit 1.0.2 that eagerly needs your help. I don't know how to programmaticlly create a new Microsoft Access(.mdb)file (Not a new table in a existing Database)using LabVIEW Database Connectivity Toolkit1.0.2. As you know, usually we can set up the connection by creating a Universal Data Link (.udl) file and inputting the path to the DB Tools Open Connec VI in the LabVIEW DataBase Connectivity Toolkit. However, searching a table within an existing database containing a great many tables is a toilfulif job. If I want to use a new DataBase file with the date and time string as its name to log my acquisition data in each measurement process, how to do? I am sure someone of you must can resolve my question, and thanks very much for your help.

I don't know what your real design considerations are here but, from I understand from your post, this is a really bad way to go about the process of logging data -- IF you want to be able to do significant ad hoc or stored procedures analyses after it has been collected. Using separate MDB files for data that ONLY differs by one field (namely that date) is not the most efficient way to organize it. What would be much more efficient would a joined table including the date and a reference ID of some sort for the various measurements that were done. That way your stored procedures for looking at ALL measurements of type X would be very simple going across ALL dates. Making such a comparison across multiple MDB files is a much more challenging process AND doing the original data collection in that way doesn't really gain you anything.
Generally, if something is difficult to do in the DCT (Database Connectivity Toolkit) it's because it's a "not good thing" to do within MDBs. I know that others probably disagree with that but I've worked with Access since it's initial release and other RDBMs prior to that both through compiled tools, Unix scripts, etc. You may, of course, still choose to proceed in the way you've described and that may work excellently for you.

Few questions about upgrading database

Hi everyone,
greetings of the day
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,
2.I think we need to create tablespaces ,do we need to create users as well
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than creating a new sysaux tablespace
4.How come we get consistent export
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the database
2.How can we move the files to the new location
3.Can we change db_name of the database
4.Can we use the old database as well
In manual upgration using catupgrd scripts
1.Can we rename the db_name
2.can we use old database as well
3.how to move the database files to the new location
4.can we perform this kind of upgrade on a different server
5.when we startup upgrade in the new home ,how it identifies the old database in-order to upgrade the old one
Thanks

udayjampani wrote:
Hi everyone,
greetings of the day
Pl post details of source and target database versions, along with your OS details.
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,Yes.
2.I think we need to create tablespaces ,do we need to create users as wellYou can create users, but it is not necessary. You need to pre-create tablespaces only if their characteristics/locations on the target are different than on the source.
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than thisNot that I am aware of - see the steps in the Upgrade Guide - http://docs.oracle.com/cd/B19306_01/server.102/b14238/expimp.htm
4.How come we get consistent export wetherEnsure the database is started in restricted mode, so users will not be able to access the database during the export.
>
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the databaseNo - DBUA will do this automatically for you.
2.How can we move the files to the new locationYou can after the upgrade move the datafiles to wherever you want - use the ALTER DATABASE RENAME DATAFILE (http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_1004.htm#i2082829) command.
3.Can we change db_name of the databaseI do not believe this is possible with DBUA.
4.Can we use the old database as wellNo - the database will be upgraded by DBUA - there is no "old" database.
>
>
In manual upgration using catupgrd scripts
1.Can we rename the db_nameYes.
2.can we use old database as wellNo - the scripts will upgrade the database - there is no "old" database.
3.how to move the database files to the new locationSee above.
4.can we perform this kind of upgrade on a different serverPl elaborate on what you mean by this. You can copy the existing database to a different server (assuming compatible OS) and upgrade it there.
>
>
ThanksHTH
Srini

Questions about Access Manager tutorials available in netbeans site

Hi
Thank you for reading my post
I have some questions about two tutoral which i find in :
http://www.netbeans.org/kb/55/amsecurity.html and
http://www.netbeans.org/kb/55/amsecurity-liberty.html
here is my problem :
we have some web services, now we want to have authentication applied for consumer who try to access our web services.
we need to have most possible flexibility because we may deploy the server for a customer with an already established Identity database ( Database Table with user details)
Also we need to have Transport level security using SSL.
I read and studied both of them and now i have some questions :
-I think Securing Web Services Using the SAML or UserNameToken is what we need for authentication and autorization of web service consumers?
is that right?
-Does Sun Java System Access Manager provide flexibility to authenticate user/password with a database table content?
-How we can apply roles in Sun Java System Access Manager when we authenticate users ?
Thanks

Imagine that we want to have an end to end security for our web services
we thought that we could use message level encryption to protect the soap message and also we should protect our web services from un-authenticated acess,
we will use userName token for this.
Our customer has large database which contains many user/password and role of those users.
some of web services should be available to higher role (manager) and not for all users.
so we should check a user role before we allows him/her to access a web service.
my question is whether Sun Access manager can help us with this? or there are other configuration or packages that we should apply to have this feature.
to explain more :
our client side is a swing application, users enter username/password to login into system. after they loged in, we send user/pass every time user want to request some data from some services. (is it good to send user/pass every time?)
We want Sun Access Manager to handle users authentication .
We also need to handle role related authorization, can Sun access manager handle this?
Thanks

Techie Question about iWeb, outbound links, and Google Analytics

Hi,
I have a kind of pretty technical question about using Google Analytics (GA) with iWeb sites to measure clicks on outbound links. Here's the setup:
1) My website's online, and GA is working properly.
2) I don't sell stuff directly, but I do have a "Purchase" page which contains a link to a specific Amazon page.
3) I'm pretty sure I can measure how many people go to the Purchase page using GA, but how do I measure whether visitors click on the Amazon link? It would be interesting to me to be able to gauge what the conversion rate is; that is, how many people actually proceed to purchase the product at Amazon.
I've checked the GA instructions and there's a page about manually tracking clicks on outbound links but it requires some code inputting. I know zero about coding, but I'm pretty sure that in iWeb you can't get access to the source code to input the required code.
Am I wrong about this? And if I am, then does anyone here know how to measure the clickthrough rate?
Anyway, hope you can help. Thanks in advance.

I don't know about the link tracking but you could have the link take you to a redirect page which automatically sends them to Amazon.com after a preset time, 0 seconds to whatever you'd like. You can put a counter on that redirect page, like StatCounter. StatCounter can tell you how many, from where they came, i.e country and area, repeat visits, etc.
Tutorials #12 & #13 describe how to put a visible counter on a page but with a redirect page you wouldn't have to bother since it wouldn't be seen. You can get all of your information from your account on the StatCounter site.
The redirect page would be a simple plain text page titled redirect.html and would look like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="refresh"
content="0; Destination URL">
<title>Redirecting or whatever you'd like to appear at the top of the browser</title>
</head>
<body>
</body>
</html>
0 Is the number of seconds to wait before redirecting the visitor. If set to zero the visitor would not know they were being redirected. Replace Destination URL with the Amazon URL you want them to go to.
OT

Basic question about Flashback Database

Hi,
I have a very generic question about using Flashback Database.
On my testing systems, for performance testing and simulation purposes, I want to create a guaranteed restore point so I can test impact on batch when code change releases are done, before deployment in production. My confusion is with respect to redo logs, as summarized in the questions below:
1. Is it possible to change redo log files, when a guaranteed restore point has been configured?
2. If yes, will the Flashback to restore point, also change the size of the redo logs?
I could not find anything in the docs about this....hence my question....
Appreciate your time taken in responding to these questions....
Regards.

HI,
donneskold wrote:
Hi,
I have a very generic question about using Flashback Database.
On my testing systems, for performance testing and simulation purposes, I want to create a guaranteed restore point so I can test impact on batch when code change releases are done, before deployment in production. My confusion is with respect to redo logs, as summarized in the questions below:
1. Is it possible to change redo log files, when a guaranteed restore point has been configured?
1) Yes it is possible.
2. If yes, will the Flashback to restore point, also change the size of the redo logs?
2) It will not change the size of redo log file. Cannot resize a redo log file..
I could not find anything in the docs about this....hence my question....
Appreciate your time taken in responding to these questions....
Regards.
Thank you

About 'create database link ...'

Dear all,
I just have forgotten to have the exact syntax for such statement. I even used this:
create database link te
connect to testdb identified by test using 'abc';
But it failed.
Thks & Rgds,
Edward

From the looks of your statement, I'm guessing that "testdb" is your instance name, and "test" is the user name. If that's right, then the statement is wrong.
It should be like this:
create database link te
connect to test identified by <tests_password> using 'abc'Of course, fill in <tests_password>.
Note that 'abc' needs to be in the local DB's tnsnames.ora file.
Tom Best

Questions about accessing Oracle9i Database Release 2

Hi
I'm new to this whole process. My question is how do I access the Application Development portion(SQL+). Do I have to subscribe to the OTN network in order to receive a username, password and host string, in order to log into the SQL Plus application. Is there any documentation that explains how I am able to access the Oracle 9i Database and all of its functions. What do I have to do in order to access The OTN network

This is fairly basic but it should get you to where you need: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a90842/ch1.htm
OTN

Some questions about my database access bean

The following is a bean (minus imports) that access a database and populates several "articles" and then returns a set of them. pretty plain really.
The bean is modified from here to add exception cactching and 'fix' other problems along the way.
http://forum.java.sun.com/thread.jspa?threadID=727979 (thanks evnafets)
The results list is genericified(!) to avoif unchecked calls (casting) in this line result.add(article);
public class dataAccess {
    public List getNewsResults() throws NamingException{
        Context initContext = new InitialContext();
        Context envContext = (Context) initContext.lookup("java:/comp/env");
        DataSource ds = (DataSource) envContext.lookup("jdbc/mySite");
        Connection conn = null;
        Statement stmt = null;
        ResultSet rs = null;
        List<newsArticleBean> result = new ArrayList<newsArticleBean>();
        try {
            String sql = "SELECT * FROM news, users WHERE news.user = users.username";
            conn = ds.getConnection();
            stmt = conn.createStatement();
            rs = stmt.executeQuery(sql);
            stmt.execute();
            while (rs.next()) {
                newsArticleBean article = new newsArticleBean();
                article.setTitle(rs.getString("title"));
                article.setAuthor(rs.getString("author"));
                article.setEmail(rs.getString("email"));
                article.setNews(rs.getString("news"));
                article.setPictureURL(rs.getString("pictureURL"));
                article.setDate(rs.getDate("date"));
                article.setTime(rs.getTime("time"));
                result.add(article);
        } catch (SQLException e) {
            //error message goes here
        finally {
            try {
                if (rs != null) rs.close();
            } catch (Exception e) {
                //error message goes here
            try {
                if (stmt != null) stmt.close();
            } catch (Exception e) {
                //error message goes here
            try {
                if (conn != null) conn.close();
            } catch (Exception e) {
                //error message goes here
    return result;
}Some questions that would be of great help if answered:
Im not too sure what a context does or what im doing with it here. My current understanding is that it allows concurrent access of the database.
        Context initContext = new InitialContext();
        Context envContext = (Context) initContext.lookup("java:/comp/env");
        DataSource ds = (DataSource) envContext.lookup("jdbc/mySite");This section im having trouble with too.
As I see it:
I set what my sql query will be;
get a connection @ conn
now im not too sure what stmt is getting, is it getting ready to send the query.
stmt does not have an executeQuery() method, so im never actually sure when the sql query gets sent to the database. I have subbed with execute() but it does not take any arguments so the problem of not sending anything remains.
            String sql = "SELECT * FROM news, users WHERE news.user = users.username";
            conn = ds.getConnection();
            stmt = conn.createStatement();
            rs = stmt.executeQuery(sql);Any help greatly appreciated.

Some questions that would be of great help if
answered:
Im not too sure what a context does or what im doing
with it here. My current understanding is that it
allows concurrent access of the database.
Context initContext = new InitialContext();
Context envContext = (Context)
Context) initContext.lookup("java:/comp/env");
DataSource ds = (DataSource)
aSource) envContext.lookup("jdbc/mySite");
Nops, it has nothing to do with concurrent access. You use tomcat to set up a Connection Pool. This causes the tomcat server to create a pool of reusable connections on startup. The connection pool (or set of Connection objects) are given a name and the server binds the set of objects to this name in a 'registry'.
From the code, you use jndi to access the Connections from the pooled objects. While doing so, you have to provide the jndi name against which this object pool is bound to.
You'll be more clear when you read the fllowing resources.
http://java.sun.com/products/jndi/
http://tomcat.apache.org/tomcat-5.5-doc/jndi-datasource-examples-howto.html
>
This section im having trouble with too.
As I see it:
I set what my sql query will be;
get a connection @ conn
now im not too sure what stmt is getting, is it
getting ready to send the query.Yes something of that sort - basically it provides you a wrapper which can accept your query, use the connection object to access the db, execute the query and return a result set.
stmt does not have an executeQuery() method, so im
never actually sure when the sql query gets sent to
the database.er....it has and that's what you use in your code. (http://java.sun.com/j2se/1.5.0/docs/api/java/sql/Statement.html#executeQuery(java.lang.String))
I have subbed with execute() but it
does not take any arguments so the problem of not
sending anything remains.Hmmm....the execute() method is for a different purpose and it does accept arguments (http://java.sun.com/j2se/1.5.0/docs/api/java/sql/Statement.html#execute(java.lang.String))
>
            String sql = "SELECT * FROM news,
users WHERE news.user = users.username";
conn = ds.getConnection();
stmt = conn.createStatement();
rs = stmt.executeQuery(sql);Any help greatly appreciated.ram.

Basic question about accessing card reader from browser

Hi,
I am very new to card technology. I have a very basic and general question not directly related to java cards.
I need to write a web application that allows the user to read a card with a card reader.
For that I maybe need to write an applet that has to access a native DLL and call methods
to get the card ID. I already have that DLL (written in Delphi) that reads multi-technology cards.
Then pass that ID to the application server to retrieve complete information
about the card holder and display them on the user browser.
Please could someone guide me on useful resources for that kind of development, for example
already existing developments, personal experience, design solutions ?
Thanks.
Adriano

Hi Joseph,
One thing I forgot to tell is that I work with contactless cards and readers.
Contactless cards use radio frequency. Despite this fact, the problem stays the same. I already have a Delphi DLL that reads contactless cards.
What I need is a way to retrieve card holder information from a client browser. The card contains a unique ID. My idea is to use an applet that reads that ID on the client-side and then calls a servlet on the server-side to retrieve holder information associated with that ID, i.e. first and last names, and finally displays them on the client browser.
So the card contains only the unique ID, a database on the server-side contains all other related data.
Technically the applet has to call the DLL via JNI.
Do you think that using an applet that way is a good solution, do you see simpler solutions, is there security issues ?
Thanks.

Question about Oracle Database 11g: Program with PL/SQL

Hello,
I've read that:
This course is a combination of Oracle Database 11g: PL/SQL Fundamentals and Oracle Database 11g: Develop PL/SQL Program Units courses.
In order to preparing for this exam, i should read the student guide, so there are 4 pdf files. One is Oracle Database 11g: PL/SQL Fundamentals, and the other 3 are regarding to Oracle Database 11g: Develop PL/SQL Program Units (volume I, II and III). My question is, regarding to this last one (Oracle Database 11g: Develop PL/SQL Program Units), which volume should i read? I saw that volume I has 400+ pages, and the IIIrd ~80.
Which document should i read? What's the difference between them?
Thanks!

Passing the exam and becoming certified are not a matter of simply reading a book or taking a training class. While books and classroom materials as well as in-class training are all important steps in preparing for an exam, experience and research are just as important. I cannot tell you that there are 53 questions on the exam and every single question maps directly back to page 13, paragraph 3 in XX book. However, If you have the classroom material, and you have the list of exam topics, you should be able to find most of the information you need. In some cases, if you are not completely familiar with a specific topic, or you don't feel like the information in the book gives you all the information you need, you may need to do a little additional research. This is all part of preparing for an exam. This process is what makes you successful as a certified professional.
Your focus seems to be solely on the course materials that you have and what volumes and chapters you should read. I'm trying to give you a different perspective - preparing for an exam is not necessarily about taking one course or reading one book and being ready. You need to review the exam topics and be sure that you are familiar with each topic.
Regards,
Brandye Barrington

Question about Access database linking in SharePoint

Similar Messages

Maybe you are looking for