A question about List

Can anyone please explain what the square symbol after an added file name in a List object is.

It is the run-time type signature.
*see full list in the 'Type Signatures' section in this link: http://java.sun.com/j2se/1.5.0/docs/guide/jni/spec/types.html
Z boolean
B byte
C char
S short
I int
J long
F float
D double
L fully-qualified-class ; fully-qualified-class
[ type type[]
( arg-types ) ret-type method type
For example, the Java method: long f (int n, String s, int[] arr); has the following type signature: (ILjava/lang/String;[I)J

Similar Messages

Urgent help! question about list.toStirng()?

currently, i am working on a word counter programe, i stored each word and it's corresponding occurrence in a linkedlist. now i need to sort the list in the decreasing order of occurrence.
and the output would look like this:
not 2
a 2
i 1
am 1
girl 1
yet 1
woman 1
but the output so far i got looks like the following:
[not   2, a   2, i   1, am   1, girl   1, yet   1, woman   1]
and i know it becasue i uesed the "list.toString()"method. the question is how can i convert this format to the previous one or i could reach it in someway else?would anyone give me some tips?
the following code is i used for sorting:
public String results() //Compare the occurrences of every two words in the list and reorder each node of
{                       //the list in decreasing order of it's corresponding occurrence
       String str = "";
       ListIterator iter = list.listIterator();
       int length = list.size();
       int i,j;
       int count1, count2;
       WordNode temp1, temp2;
      for(i = 0; i < length-1; i++)
            for(j = i + 1; j<length; j++)
               temp1 = (WordNode)list.get(i);
               temp2 = (WordNode)list.get(j);
               count1 = temp1.getCount();
               count2 = temp2.getCount();
               if(count1 < count2)
                    list.remove(i);
                    list.add(i,temp2);
                    list.remove(j);
                    list.add(j,temp1);
      str = list.toString(); //Call the toSting() method in WordNode class to get each word and it's occurrence
      return str;
}much appreciated.

Hi there,
The problem you have here is that you are not separating the distinct phases of your program. These are:
- build the sorted list
- print report
Thus, if I had to write the code below, I would change your results by two methods:
List sortedResult = sortWords();
printReport(sortedResult);
My sortWords() would be your results(), except that I would return list at the end, not list.toString().
Then, I would have all the flexibility in the world inside my printReport( List ) method. As a start, it would probably look like this:
public void printReport(List aList) {
Iterator iter = list.iterator();
while(iter.hasNext()) {
    System.out.println(iter.next());
}Regards,
Manuel Amago.

Question about free down loading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns if I down load Mavericks then what will happen to Bangla

Question about free downloading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns is, if I download Mavericks then what will happen to Bangla language in mountain lion? Samar Laha

No reason to be embarassed. You are not alone.
You will need an external drive. If you have a Time Machine drive without enough disk space you can create the clone there however it's advised that you keep your Time Machine and clone on separate drives. If the drive dies you loose both types of backup.
Download and install the clone software. Everyone has their favorite. These are the two most common applications used. I prefer SuperDuper because of it's simplicity in setting up. It's also free for the first clone where with CCC you have to give a Credit Card then cancel if you do not want to keep.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
Select your drive in the To popup. Click on Copy Now. That's it.
Yes, it really is that simple....

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Follow-up on question about copying 10.4

I only got one reply to my question about how to copy OS 10.4 from one internal drive to another and unfortunately, the response was cut short. Something about if I had another computer with Firewire, using it and that's as far as the response went. Yes, I have a laptop and have Firewire, but still don't know how to use it to help.

If you just wish to make a duplicate of one hard drive to another hard drive in the same G5, then do this:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the second internal drive. Source means the internal startup drive.

Follow-up question about forms and SharePoint Online

I asked a question about life after InfoPath earlier, and got a good answer:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
pages and workflow.
Neither of those are available in SharePoint Online, so what would you do?

Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
is hosted by another server.
By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out. XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
Mike G.

Questions about 3702i and WSM (WSSI)

I have several questions about the 3702i AP and the WSM that do not seem to be answered in the data sheets/documentation.
Any insight would be appreciated.
1. Is the WSM officially supported on the 3702 AP? The documentation seems to conflict on this.
For example, at the top of the WSM data sheet: "Flexible add-on third radio module for the Cisco Aironet 3600i or Cisco Aironet 3600e Series Access Points". Then later on in the page graphic shows the 3700 series radios too. I have found multiple pages that have similar conflicting information.
2. Can the WSM be used WITHOUT MSE and Cisco Prime? If so, are there any limitations?
3. How does the licensing work? Where is the license installed -- WLC, MSE, Prime? Do ANY of the features work without the license?
3a. How do you order the license? The SKU listed on the data sheet (L-WIPS-MM-1AP) is not a valid part number in CCW.
4. Is it possible to do sniffing with a WSM? (the idea being not having to dedicate an AP to sniffing, or taking down a client-serving AP to sniff)
Thank you.

Ok, so you are talking about off-channel scanning, which is actually a very short duration 50ms, that the AP is actually off-channel to scan.
http://mrncciew.com/2013/03/16/configuring-rrm/
Are you thinking of this bullet point?
Access points with wireless security module: The Cisco Aironet® Access Point Module for Wireless Security aggressively scans all channels without affecting the data-serving radios in the 2.4- and 5-GHz bands.
To me, that's just saying that the WSM is scanning and not interferring with the AP's normal radios.
HTH,
Steve

Question about download file in OAS4

Question about download file in OAS4:
I use Oracle Application Server 4.0.7 on my Windows NT 4.0 SP6;
I use PL/Sql Cartridge developer a document system; It's use the
upload/download in PL/Sql Cartridge;
I read the document , the Upload/download in Pl/Sql Base on the
Oracle Application Server's Content Service. the Problem is when I
download a document, If I upload a Html or MsWord file, It will store in a LongRaw column, when me download ; It's tell me can't
find a application to open this file; I will select a application
from list to open the download file;
As normal, It will open MsWord Automatic when download a "doc" file ; also It will open a new window of Browser to view a Html file;
I check the download process on client Browser; when download
file, The content-type always return "application/octet-stream";
Also the download File will lost the postfix of the file,
So Browser don't open the File Automatic;
I think If I set the correct Content-Type , Browser can know how open the file; So I use owa_content.set_content_type procedure
set the Doc file to "application/msword" , but the WEb Server always
return "application/octet-stream";
I didn't know how to do this problem, Plese help me.
null

I have a Tecra M2 and rely on your email update to ensure I have the latest drivers on my machine.
When I received a Toshiba support email on 14 April 2005 giving reference to a QFE from Microsoft I assumed it would be necessary for my Tecra.
I was very confused when I found that this QFE and subsequent ones posted on the 16 April 2005 relate to Pre SP2 critical updates no9t required if one has already taken earlier advice of updating to Service Pack, at the very least your narrative should make mention of this. I find it very difficult to believe that your updates are two+ years out of date.

Question about Kurts comments discussing the seperation of AIA & CDP - Test Lab Guide: Deploying an AD CS Two-Tier PKI Hierarchy - Kurt L Hudson MSFT

Question about the sentence in bold. What is the meaning behind this comment?
How would you separate the role of the AIA and CDP from a CA subordinate server? I can see where I add a CES and CEP server which has those as well, but I don't completely understand his comment. Because in this second step, (http://technet.microsoft.com/en-us/library/tlg-key-based-renewal.aspx)
he shows how to implement CES and CEP.
This is from the guide located at: http://technet.microsoft.com/library/hh831348.aspx
Step 3: Configure APP1 to distribute certificates and CRLs
In the extensions of the root CA, it was stated that the CRL from the root CA would be available via http://www.contoso.com/pki. Currently, there is not a PKI virtual directory on APP1, so one must be created.
In a production environment, you would typically separate the issuing CA role from the role of hosting the AIA and CDP.
However, this lab combines both in order to reduce the number of resources needed to complete the lab.
Thanks,
James

My concern is, they have a 2-3k base of xp systems, over this year they are migrating them to Windows 7. During this time they will also be upgrading hardware for the existing windows 7 machines. The turnover of certificates are going to be high, which
from what I've read here, it worries me.
http://blogs.technet.com/b/askds/archive/2009/06/24/implementing-an-ocsp-responder-part-i-introducing-ocsp.aspx
The application then can go to those locations to download the CRL. There are, however, some potential issues with this scenario. CRLs over time can get rather large
depending on the number of certificates issued and revoked. If CRLs grow to a large size, and many clients have to download CRLs, this can have a negative impact on network performance. More importantly, by
default Windows clients will timeout after 15 seconds while trying to download a CRL. Additionally,
CRLs have information about every currently valid certificate that has been revoked, which is an excessive amount of data given the fact that an application may only need the revocation status for a few certificates. So,
aside from downloading the CRL, the application or the OS has to parse the CRL and find a match for the serial number of the certificate that has been revoked.
With the above limitations, which mostly revolve around scalability, it is clear that there are some drawbacks to using CRLs. Hence, the introduction of Online Certificate
Status Protocol (OCSP). OCSP reduces the overhead associated with CRLs. There are server/client components to OCSP: The OCSP responder, which is the server component, and the OCSP Client. The OCSP Responder accepts status
requests from OCSP Clients. When the OCSP Responder receives the request from the client it then needs to determine the status of the certificate using the serial number presented by the client. First the OCSP Responder determines if it has any cached responses
for the same request. If it does, it can then send that response to the client. If there is no cached response, the OCSP Responder then checks to see if it has the CRL issued by the CA cached locally on the OCSP. If it does, it can check the revocation status
locally, and send a response to the client stating whether the certificate is valid or revoked. The response is signed by the OCSP Signing Certificate that is selected during installation. If the OCSP does not have the CRL cached locally, the OCSP Responder
can retrieve the CRL from the CDP locations listed in the certificate. The OCSP Responder then can parse the CRL to determine the revocation status, and send the appropriate response to the client.

Question about Rescheduling Start Date of a Task

Question about Rescheduling Start Date of a Task
I'm trying to determine whether the 'Reschedule' action is appropriate to my situation...
I have a service that consists of 4 tasks. The first 3 tasks will be completed immediately and then the request's 4th task will sit in a queue for about a month so that all of these requests can be grouped together and fulfilled during a few overnight work sessions.
While the 4th task is waiting to be fulfilled, the technician will be contacting the requestor to schedule the work to be done sometime during a 3 day window. The technician needs to specify which of the 3 days each request will be worked on. I'm not sure if I should store the date in a service form field or have the technician reschedule the task so that the start date of the task is set to one of the 3 days. If I use the reschedule feature, are there any downsides?
The advantage of using the reschedule feature is that the scheduled start date can be displayed in ServiceManager's task list and can therefore be sorted on and queried. This wouldn't be possible if I stored the date in a dictionary field on the service form. In that case, I'd have to use custom reports to group the tasks by start date.
Please let me know your thoughts...
Thanks,
Scott

This strikes me as a very good use of this feature, since your need to to have the date for this task rescheduled/reflected in ServiceManager. This is the specific effect of using this feature.
For the benefit of others reading this post, remember: this rescheduled date will not change the due date for the service.

Questions about CIN tax procedure choice and pricing schemas

Hi all,
I have to implement SAP on a Indian company and I'm verifying all particularity about this country (in particular tax procedures and the great number of differents tax conditions used).
I have two questions about tax procedures and pricing schemas. Every feedback about thse points will be appreciated.
a) To choose tax procedure TAXINN or TAXINJ which are the elements that I have to consider?
I have read lot of documentation about CIN implementation and Iu2019m oriented to choose TAXINN schema, but If possible I would to understand better which are on behalf of one choice or another.
b) To define pricing schemas for India, after check with local users and using examples of documents (in particular tax invoice) actually produced, I have understood that taxes have to be applied on amount defined starting from price list, minus discounts recognized to customer plus surcharges eventually to bill (packing, transport, etc.).
Itu2019s correct for any type of taxes that tax amount is calculated on u201Cnet valueu201D defined at item level or there are exceptions to this rule?
Thanks in advance
Gianpaolo

hi,
this is to inform you that,
a) About point 1 I know the difference between the 2 tax procedures (conditions or formulas). I also have read in others post in the FORUM that TAXINN is preferable. So I would to understand which are the advantages to choose instead TAXINJ. There are particular reasons or it'a only an alternative customizing setting?
a.a. for give for posting the link : plese give me the advantages of TAXINJ and TAXINN
CIN - TAXINN and TAXINJ
b) About point 2, to define which value has to be used as base amount to calculate taxes isn't a choice, but is defined depending by fiscal requirement of the country, in this case India fiscal requirement. I know that, as Lakshmipathi
write as answer on my question, exception could be, but it was important for me to understand if I have understood correctly the sequence of the pricing condition in the schema in "normal" situation.
b.b. you can create your own pricing procedure for this and go ahead.
hope this clears your issue.
balajia

Few questions about difference between Satellite P70 , L70, S70

Hello, i have many questions about the series P70 , L70, S70 that come with a 1920x1080 panel.
1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it ?
3) Do all three (P70, L70, S70 series) come with the same TFT Panels ?
4) Which of the above series supports mSata ?
5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
6) All of the above, come with a S-ATA II or S-ATA III interface ?
7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
Thank you in advance.

>1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
What Sat L70 and S70 models do you mean exactly? There are different L70-xxx and S70-xxx models on the market which supports different hardware specifications.
>2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it?
As you can see in this [Sat P70 HDD replacement document,|http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports 2nd HDD bay BUT even if there is an 2nd HDD bay this does not mean that you could use 2nd HDD. In case the 2nd HDD bay would be equipped with HDD connector, you could use the 2nd HDD
I found also the [Sat L70/S70 HDD replacement |http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] document on Toshiba page and there I can see that 2nd HDD bay is not available
> 3) Do all three (P70, L70, S70 series) come with the same TFT Panels?
See point 1). Different P70, L70, S70 models were equipped with different hardware parts.
> 4) Which of the above series supports mSata?
As far as I know only some P70 models are equipped with an 256GB mSATA-SSD.
> 5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
See point 4) not all models supports the same hardware specifications
> 6) All of the above, come with a S-ATA II or S-ATA III interface ?
I dont think that SATA III is supported. I guess it would be SATA II
> 7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
Not easy to answer because there are too many models released in Europea.
And not all models are available in each country. So I guess you will need to look for models which were released in your country.

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

EBS 12.1.3: a few questions about cloning

Hi,
We have EBS 12.1.3 on AIX 7.1.
A few questions about cloning from shared application tier environment to non-shared application tier environment. We have been following "Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]"
Source environment (shared app tier):
- Two active application nodes and LB
- One active database and one passive database setup with Oracle Data Guard.
- SSL termination at the load balancer
- PCP implemented
Target environment (non-shared app tier):
- One active application node
- One active database node
- No SSL
- No PCP
After the cloning was completed we noticed the following problems in the target system:
1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
Workaround:
Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
<webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
<sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
<login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
<externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
Run AutoConfig and start application tier.
Is there a better and supported solution for this?
2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
3. As apps user run cmclean.sql
4. Restart application tier
Is there a better solution for this?
3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?
4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?
5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
Thanks for your answers in advance.
BR,
TH

1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
Workaround:
Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
<webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
<sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
<login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
<externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
Run AutoConfig and start application tier.
Is there a better and supported solution for this?No, you need to edit the context file manually and run AutoConfig.
2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
3. As apps user run cmclean.sql
4. Restart application tier
Is there a better solution for this?You are following the best approach. You could update the node details from the backend if you want.
3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?By default, Rapid Clone will create the target database in noarchivelog mode.
4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? Correct.
What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?You can copy the application tier node files while the application is up. And, you do not need to shutdown the application to run "Maintain Snapshot Information".
5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
If it is working from one browser, then it should not be an EM issue. Have you tried from a different client and see if this works? Have you changed any setting in your IE browser? Please make sure you add the EM URL to the trusted sites list.
Thanks,
Hussein

A question about List

Similar Messages

Maybe you are looking for