A question about 'long' dataType in NT platform

Why the maximum of the 'long' dataType in NT
paltform is only 4k? I looked up some Oracle
reference books which told me the maximum must be 2G.
My Oracle version is 8.0.5.0.0
Thanks for your advice if you can help me to solve this question.

Hi,
how did you figure out, the size of long?
In PLSQL the maximum for a varchar2 is 4k.
You have to use varchar2 to retrieve the long content. But look at dbms_sql, there are procedures to extract portions of long columns.
HTH
Detlev
null

Similar Messages

Question about long audiobook files before I buy Zen Mi

I am in the market to buy a hard dri've MP3 player for the purpose of playing audio books. Specifically, I want to download audio books from my local library's netlibrary account and listen to them on the go (these files are 32kbps DRM WMAs). These files have caused problems for two different players I have tried, due to their long length (most files are over 00MB, and play for 8+ hours). I have an old iRi'ver flash player, which will play these files fine, until you get about 4 hours into the file. Then, when you turn off the player, the time elapsed jumps from where you were to 2 hours or so. What this means is that you can't listen to the entire book unless you play the book for its entire duration without stopping it or turning it off. I next tried a Rio Carbon, but it has a different problem. Every time you turn off the Carbon and turn it back on, it will lose it's place in the file by 0min-hour, depending on how long the track is and how much you have listened to. The only ways around this is to either never turn the player off, or write down the time elapsed before you turn off the player, and then fast forward to that time when you turn the Carbon back on. After fighting with it for a week, I returned the Carbon.
So my question is, has anyone actually used a Zen Micro to listen to a very long audiobook, and does it have any weird issues like I have experienced with other players? All I want the thing to do is remember where I left off when I power off the device, within a few seconds.
Thanks

Lots of people have audio books on their micros and i havent head of anyone complaining about them. one good feature the micro has that i believe other dont is the ability to place book marks in a song/audio book at a set time so you can automatically go to where you want without searching.so you could save the book marks for each chapter or something.

The question about RAW datatype in VBA with OO4O

Hi all.
I have developed a sort of VBA program with oo4o.
When I issued "select rawtohex(saddr),saddr from v$session where rownum < 2" and I displayed the result on excel spread sheet.
The result was below.
RAWTOHEX(SADDR) SADDR
C0000000E14ADDF0 �
I found I couldn't display a raw datatype result without using RAWTOHEX function.
But, I query the table using "*",such as " select * from v$session" sometime. So I have to display the raw datatype result without using oracle function.
I heard that the "RAW" datatype is a array of byte, so I used byte array.
The following is my first idea and the result is wrong.
The result is 'FF000000......', not 'C000000....'
Is there any good idea?
Dim oSession As Object
Dim oDatabase As Object
Dim oRs As Object
Dim cntCol, cntRow As Long
Dim rowNum, colNum As Long
Dim sraw() As Byte
Dim k As Integer
Dim hexaString As String
Set oSession = CreateObject("OracleInProcServer.XOraSession")
Set oDatabase = oSession.DbOpenDatabase(gTargetServer, gUserID & "/" & gPasswd, 0&)
Set oRs = oDatabase.DbCreateDynaset(gSqlString, 0&)
cntCol = oRs.Fields.Count
cntRow = oRs.RecordCount
ReDim resData(cntRow, cntCol) ' the variant type array to store result
'To store column title.
For colNum = 0 To cntCol - 1
resData(0, colNum) = oRs.Fields(colNum).Name
Next colNum
'To store data.
For rowNum = 1 To cntRow
For colNum = 0 To cntCol - 1
Select Case oRs.Fields(colNum).Type
Case 11
sraw = oRs.Fields(colNum).Value
For k = 0 To UBound(sraw)
hexaString = hexaString & Hex(sraw(k)) '<= here.***********
Next k
resData(rowNum, colNum) = hexaString
Case Else
resData(rowNum, colNum) = oRs.Fields(colNum).Value
End Select
Next colNum
oRs.MoveNext
Next rowNum
I hope I get helps.
Bill.

But, I query the table using "*",such as " select * from v$session" sometimeCan't you use
select rawtohex(saddr) hexaddr, t.* from v$session t
(if you really need '*' ) ?
Rgds.

Question about Java implementation in Linux platform

Hello,
I shall implement one Java program in Linux platform. I'm a newer to linux. Need I install some special software in Linux platform to compile and run JAVA program?
Thank you in advance
java_linux

Sorry, this forum is about Sun Studio, which is a collection of native compilers and tools. About Java, please use Java forum; for example, one of these: http://forums.sun.com/category.jspa?categoryID=5

Had to change my Apple ID because the original email address is no longer valid. How do I change the iCloud user name on iMac? I found instructions about signing out of iCloud and signing back end. It asks questions about contact, etc.

Had to change Apple ID due to email address no longer valid. Trying to change id for icloud...saw direction online about signing out of icloud and signing back in...when it ask questions about contacts, photos, etc. being deleted how do I answer those? That just sort of freaks me out.

For the ones that give you an option, select the option you want (keep on the Mac or Delete). For the ones that are simply warning you, click on Delete from Mac.
They will all come back when you sign back on, since all you did was change your existing Apple ID to a new email address. It's the same iCloud account, just with a different name.
It's the only way to get your updated ID signed onto iCloud.
Cheers,
GB

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

Question about subclips in a long project

Hello all;
I am editing a 1 hour long documentary in full HD with a lot of clips and so forth in it. What I have been doing is for some segments creating a sequence in another project, rendering it and saving it as a H264 Full HD format, the same as the main project. Then importing that rendered version into the main project instead of all the component parts. This makes it harder if I want to change anything in that segment, but it cuts down on the load time of the main project, and seems to work OK.
My question is - when I finally render the whole 1 hour project, will these included clips get degraded because they will be (I guess) rerendered? Is there a better strategy for this? Also, I'm doing the project in three 20 minute sections that I intend to simply run back to back in Encore when I'm done. Is that likely to be a problem.
Thanks in advance for any advice on this.
Jim G.

Hello again.
I hope you don't mind if I ask you a follow up question about this issue of consolidating complex sequences into a rendered video file and then using that in a longer sequence. On CS5 within the Export screen there is a button labeled, "Match Sequence Settings" if I render a segment with that selected and import that into a longer sequence is that a problem too? Or do I have to select something like AVI lossless? Or should I avoid that as well?
Finally, for After Effects segments that I want to incorporate into Premier, I can use the Dynamic LInk thing, but it seems to mess with the color when I see it in Premiere. Would it be OK to use the lossless renders from AE in the CS5 timeline?
I apologize for pestering you with these questions.
Thanks, Jim Greeson

Question about the new JAVA Update J2SE 5.0 Release 3

Here is some info about this update:
Java 2 Platform, Standard Edition (J2SE) 5.0 Release 3 allows applications and applets developed for the J2SE 5.0 platform to run on Mac OS X v 10.4.2 and later.
This update does NOT CHANGE the DEFAULT VERSION of Java on your Mac from Java 1.4.2 to J2SE 5.0, though Java applications that require J2SE 5.0 may specifically request it. You can change the preferred Java version for applications and applets by using the new Java Preferences utility. This utility is installed by the J2SE 5.0 update at /Applications/Utilities/Java/J2SE 5.0/.
http://docs.info.apple.com/article.html?artnum=302412
HERE IS MY QUESTION---
This update makes me nervous cause I don't know much about Java. IF I change my default version to this new 5.0 will it mean that some of the older Java stuff on the web won't work? Should I just download this and ignore it? What should I do about this update?
Thanks for the help!
Renée

I too seem to be suffering issues with loading web pages after the 10.4.3/Java 5.0 update. I have reinstalled both updates, changed the java settings, emptied all the caches, and tried various combinations thereof, and I still have problems with web pages loaded. most of the problems appear to be related to rendering frames and images - In fact a couple of web sites I navigate to (upon looking at the source for the page" state "It appears your browser does not support frames." I think this is something broken in the latest release. Unfortunately, I cannot reinstall the latest copy of Safari, because the installer states "This version of Safari cannot be installed. It requires version 10.4.2." I guess I am in a pickle until Apple comes out with another update. BTW I have some pages that Safari will not render but IE running on the same box will. I also noticed that the problem propagated to other applications that use Java....For instance the Dashboard widget from google (Google Maps) no longer renders the tiled (framed?) map pieces...instead you get the ubiquitous "?" icon.

Question about RAM CL

Hi guys. I'm finalizing my PC build and have a question about ram CL that I cannot find answers to on the tweakers page here. http://ppbm7.com/index.php/news/planning?showall=&start=3
I'd like to use these two ram sticks as an example.
Transcend JetRam™ High-Performance 8GB DDR3-1333 240-Pin Module : CL9, 6-Layer PC Board
Transcend JetRam™ High-Performance 8GB DDR3-1600 240-Pin Module : CL11, 6-Layer PC Board, Ultimate cross-platform compatibility and stability
My question is, which is better for video editing? On the one hand we have 1333mhz at with a CL of 9. On the other, we have faster 1600mhz ram, but at a higher CL of 11. Now, I'm not one to get caught up in the technicalities like it may seem, but I do want to understand these so I can make informed decisions, especially when price is a factor. In this case however, they are the same price...

From http://ppbm7.com/index.php/news/cpu-mobo
Make up your mind about the number of memory sticks you want to install. On the X79 platform, do you want to use 4 slots, or do you want to fully populate all 8 slots? This is very important especially with i7-3930K / 4930K CPU's, which have a rather finicky memory controller.
Make a shortlist of quad or octo packs of memory sticks in the size you want, limiting yourself to ONLY sticks using 1.5V or less.
Check the motherboard manufacturer's site QVL list to see which of the sticks on your shortlist are approved. Pay attention to the number of slots for which they are approved. Some modules are approved for 4 slots only, others for fully populated use.
Check the memory manufacturer's site QVL list to see which motherboards are approved.
Try to establish if there are users that have been successful in using the sticks on your shortlist and delete any that were giving trouble to others. NewEgg can be a good source for that.
Now that you have a very short shortlist, contact the Technical Support departments of both the motherboard manufacturer and the memory manufacturer and ask them to confirm or deny the compatibility of the memory modules in the quantity you need.
If both confirm compatibility, check the physical height of the modules including heatsink in relation to the intended CPU cooler. Do they fit without modding?
In general, only buy matched sets of memory sticks. There are too many different sticks with the same type number, that will cause grief when bought as four single sticks, but you limit the risk by only buying quad sets or octo sets for fully populated X79 platforms.
CAS latency is no longer important, in fact, with the finicky nature of the memory controller of the Sandy Bridge-E, it can be advantageous to choose a higher CAS latency for improved compatibility. What can be important - relatively speaking, only in single digit % performance differences - is the rated speed of the memory, 1333 or 1600 or 2133 or even 2400.
Even though the X79 platform only supports - at least officially - up to DDR3-1600, one can use XMP profiles in the BIOS to have the memory run at its rated speed of say 2133. For my new 'Monster' I followed these steps and ended up with a fully populated 8 x 8GB octo set of G.Skill RipjawsZ F3 DDR3-2133 sticks that are running without any problems at 2180 MHz.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Questions about Indexing and Using an Indexing POA

Although I have only about 50 users, at least 15 of them have in excess of 100,000 messages in their accounts and the POA (version 7.0.2) is regularly slowing to a crawl. (I just know that plans for revolution are fomenting!) I have embarked on a campaign to reduce these accounts by archiving everything off to get mail accounts down to 3000 or fewer pieces. I have achieved user buy-in, but have worked on only a few users so far.
In another closely related thread, it was suggested to me that the PO speed issues relate to broken indexes. And I suspect that given so many messages, the indexes were never getting fully rebuilt with the default QF POA settings. I am trying to fix that situation in addition to reducing mail account sizes. So, I have set up a second POA on another server and dedicated it to the indexing task. The /qfinterval is set for 1 hour, other /qf switches at default. The POA-QF does no mail delivery, but it does do nightly user upkeep.
The POA-QF seems to be steadily working away and making progress at reducing the number of unindexed messages. However, I have questions about what I am seeing and what more I can do:
1. Is the progress I am seeing real progress? For example I have a user with over 100,000 messages to be indexed and every time I check the logs, the count drops by about 500 messages per hourly QF cycle. I assume that if I just let it keep running, it will eventually get caught up and fixed. Not only with this user, but with all the others as well. Will my patience (and theirs) be rewarded? Are there any gotchas I need to prepare for?
2. One user has recently had virtually all of her messages successfully moved to archive. I can see them in the Archive, and do not see them in the online account. However, now over a week later, QF still shows >130,000 items still left to index for that user. The POA-QF is making slow, steady progress reducing that number, but why is this user's QF count still so high? Does it just need more time, or is there something amiss for this user?
3. I may want to rebuild indexes for single users from scratch. I have seen the TID 3105742 which tells how to do this: Essentially you turn off mail delivery functions, and make some other switch changes to dedicate the POA to indexing for just a single user, and then you let the POA rebuild the indexes. The implication of that scenario is that the POA is now enjoying exclusive access to the user's databases.
If I want to use my secondary POA-QF to rebuild a user's index from scratch, does the main POA have to be offline and the user out of GWise? That is, Does the QF process require exclusive access in order to rebuild indexes from scratch?
Thanks for any thoughts or suggestions.
Peter Smick

pgsmick wrote:
> 1. Is the progress I am seeing real progress? For example I have a user with
> over 100,000 messages to be indexed and every time I check the logs, the count
> drops by about 500 messages per hourly QF cycle. I assume that if I just let
> it keep running, it will eventually get caught up and fixed. Not only with
> this user, but with all the others as well. Will my patience (and theirs) be
> rewarded? Are there any gotchas I need to prepare for?
Set this switch for this indexing POA - /qflevel=999 - this will index
everything in one run. It will take a long time, but with no qflevel switch you
are indeed only indexing 500 messages at a time, and if the user has that much
mail, it might never really catch up.
>
> 2. One user has recently had virtually all of her messages successfully moved
> to archive. I can see them in the Archive, and do not see them in the online
> account. However, now over a week later, QF still shows >130,000 items still
> left to index for that user. The POA-QF is making slow, steady progress
> reducing that number, but why is this user's QF count still so high? Does it
> just need more time, or is there something amiss for this user?
>
This is odd, because really the index count should drop to nothing, but with the
above switch this might get resolved as well.
> 3. I may want to rebuild indexes for single users from scratch. I have seen
> the TID 3105742 which tells how to do this: Essentially you turn off mail
> delivery functions, and make some other switch changes to dedicate the POA to
> indexing for just a single user, and then you let the POA rebuild the indexes.
> The implication of that scenario is that the POA is now enjoying exclusive
> access to the user's databases.
Not really - the POA is not enjoying exclusive access to the user's database,
the indexer is just avoiding an attempt to index anything else.
> If I want to use my secondary POA-QF to rebuild a user's index from scratch,
> does the main POA have to be offline and the user out of GWise? That is, Does
> the QF process require exclusive access in order to rebuild indexes from
> scratch?
No - QF never requires exclusive access. That said, you may find that an
extremely vigorous QF can cause slowdowns for the user.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Questions about editing with io HD or Kona 3 cards

My production company is switching from Avid to Final Cut Pro. I have a few editing system questions (not ingesting and outputting, just questions about systems for the actual editors - we will have mac pros with either kona 3 or io HD for ingest and outputs)
1) Our editors work from home so they most likely will be using MacBook Pros - Intel Core 2 Duo 2.6GHz 4GB computers with eSata drives to work on uncompressed HD, will they be able to work more quickly in FCP if they are using the new Mac Pro 8-Core (2 Quad-Core 2.8GHz Intel Xeon) or will the mac book pro's be able to hold their own with editing hour long documentaries, uncompressed HD
2) Will having an AJA Kona 3 (if we get the editors mac pros) or io HD (for the mac book pros) connected be a significant help to the editor's and their process, will it speed up their work, will it allow them to edit sequences without having to render clips of different formats? Or will they be just as well off without editing with the io HD?
I'm just trying to get a better understanding of the necessity of the AJA hardware in terms of working with the editors to help them do what they have to do with projects that have been shot on many formats- DVCPro tapes, Aiptek cameras that create QTs and P2 footage.
Thanks

1. with the IoHD, laptops become OK working with ProRes and simply eSata setups. Without the Io, they can't view externally on a video monitor (a must in my book). It will not speed up rendering a ton, nor will it save renders of mixed formats. The idea is to get all source footage to ProRes with the Io, and then the Io also lifts the CPU from having to convert ProRes to something you can monitor externally on a video monitor, and record back to any tape format you want... all in real time.
2. Kona 3's on Towers would run circles around render times on a Laptop... no matter what the codec, but the Kona does not really speed renders up. That's a function of the CPU and just how fast is it. (lots of CPU's at faster speeds will speed up render times).
I'd recommend you capture to ProRes with Io's or the Kona 3 and don't work in uncompressed HD. You gain nothing doing it quality wise at all. And you only use up a ton of disk space (6 times the size in fact) capturing and working in uncompressed HD, which from your post, you're not shooting anyway. The lovely thing about ProRes is that it's visually lossless, efficient, and speeds up the editing process. Mixing formats can be done, but it's better to go to ProRes for all source footage, and edit that way.
With either the Kona or the Io, you then can output to uncompressed HD tape... that's what they do for you no matter what codec you've edited in. ProRes is designed to be the codec of choice for all HD projects when you're shooting different formats especially... Get them all singing the same tune in your editing stations, and you'll be a much happier camper. Only reason to buy laptops is portability... otherwise you're much better off with towers and the Kona 3 speed wise.
Jerry
Message was edited by: Jerry Hofmann

Question about internet security...please help!

Hi everyone,
I have a question about the macbook's internet security.
A few days ago I became aware that my sibling was using a laptop for internet use at my house which he got from a person that I do not trust. He is very computer-savy and we're worried that he may have installed some form of spy ware on that laptop and in turn, may have tried (or succeeded) in accessing my Macbook through some form of spyware. My house is hooked up with a D-Link wireless router, and at the time, it had no internet/access-password.
So my question is, could this person have accessed my computer and personal information remotely by and through the laptop that my sibling got from him. I was under the impression that Mac's have very strong firewalls, but I have also heard that as long as he knew what he was doing, he could have accessed my computer. I don't have a wireless "network" set up at my house, I just simply use the router for internet. But my sibling told me that this guy was his "network administrator" which leads me to believe that he must have had remote access to the laptop.
Can anyone with knowledge on this problem please weigh in and let me know what I need to do to confirm that no one has accessed anything from my macbook.
Thanks!

One option if you want to be extra safe is turning on FileVault (System Preferences -> Security), which will encrypt everything on your computer so that if somehow someone does gain access to your computer they will have a next to zero chance of being able to read anything they get from your computer. You have to have a lot of extra hard drive space on your computer to turn it on though.
Also, a "network" is just a connection between computers, regardless of the internet is involved or not. So when you connect your computer to the router which gives you the internet, you are putting your computer on a network. Now I believe that in order for this person whom you don't trust to gain remote access to your computer, they would have to have more information such as an IP address for your computer, through the router in order to get to it.
One thing I think is very important to consider that isn't on the technical side of things is something called "Social Engineering" which is a form of cracking, or hacking. You can do your own research, but in a nutshell Social Engineering is getting people that have access to something I'm trying to hack to give me information. For instance, this person you don't trust could be giving your brother the computer in the hopes that he will download something through your router to that laptop which could give him IP addresses and other information. And then when he gets that laptop back he could scan it for useful information and your brother wouldn't know he did anything wrong at all. The best way to avoid this is purely education and communication. Even if your brother doesn't share the same suspicions about this person, surely he will understand the need to be careful and smart when it comes to sharing personal information in the digital world.

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

A question about 'long' dataType in NT platform

Similar Messages

Maybe you are looking for