A reference was created to embedded interop assembly

Hi
I have several warnings as below;
A reference was created to embedded interop assembly 'Accessibility' because of an indirect reference to that assembly from assembly 'System.Windows.Forms'. Consider changing the 'Embed Interop Types' property on either assembly.
What do I need to do to resolve these?
Thanks
Regards

Hi Y a h y a,
>>A reference was created to embedded interop assembly 'Accessibility' because of an indirect reference to that assembly from assembly 'System.Windows.Forms'. Consider changing the 'Embed Interop Types' property on either assembly.
Could you tell us the real project you were developing, WinForm or others? When did you get this error message?
Based on the error message, you would check whether it is related to the
Embed Interop Types property.
Reference:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/ee5b0fdf-da01-499b-862b-c50ef914c35f/warning-a-reference-was-created-to-embedded-interop-assembly-stdole?forum=visualstudiogeneral
https://social.msdn.microsoft.com/Forums/vstudio/en-US/139194b1-059b-47c6-b079-705b39e3f888/a-reference-was-created-to-embedded-interop-assembly?forum=clr
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Warning "A reference was created to embedded interop assembly 'stdole'"

I add Video Cap Active X Control in VB 2010 to display video from my camera IP, but in error list, there is 3warning like this
Warning 1
A reference was created to embedded interop assembly 'stdole' because of an indirect reference to that assembly from assembly 'AxInterop.VIDEOCAPLib'. Consider changing the 'Embed Interop Types' property on either assembly.
Warning 2
A reference was created to embedded interop assembly 'stdole' because of an indirect reference to that assembly from assembly 'Interop.VIDEOCAPLib'. Consider changing the 'Embed Interop Types' property on either assembly.
Warning 3
A reference was created to embedded interop assembly 'stdole' because of an indirect reference to that assembly from assembly 'Microsoft.VisualBasic.Compatibility'. Consider changing the 'Embed Interop Types' property on either assembly.
I 've read this link http://msdn.microsoft.com/en-us/library/ff182188.aspx but i still confuse and I don't know how to fix that case. I hope anyone can help that problems with some example
thank you

Hi ainunzariah,
You can try set the Embed Interop Types property to false for
AxInterop.VIDEOCAPLib,
Interop.VIDEOCAPLib and Microsoft.VisualBasic.Compatibility
in the References folder to see if it helps.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Db file in Replica was created in wrong folder

Hello!
I created db file at \BDB_HOME\BDB_SUBx in Master, but in Replica site db file was created in wrong folder which is BDB_HOME.
Do I miss something than setting path to DatabaseEnvironmentConfig.CreationDir ?
\BDB_HOME
|
-BDB_SUB1
-BDB_SUB2
-BDB_SUB3
FYI
Ver.5.1.19 (HA)
C#
VisualStudio.Net 2010
Thanks,
Osamu

Hi Osamu,
This is a known limitation with BDB HA at the moment. This issue is tracked internally in SR #19041. We hope to fix it, but do not guarantee that it will make it, in the next BDB release, 5.2.
Osamu, if you have access to MOS (MyOracle Support) please consult Note 1250654.1 (Doc ID 1250654.1) -- How to Correctly Replicate a Directory Structure Involving Subdirectories Between Master and Client. This article explains in detail this issue and how to work around it for now.
For reference, to explain the issue in more detail, suppose on the master the environment directory structure looks something like this:
\BDB_ENV_HOME
     \BDB_SUBDIR_1
     - DbFile_1_1.db
     - DbFile_1_2.db
     - DbFile_1_N.db
     \BDB_SUBDIR_2
     - DbFile_2_1.db
     - DbFile_2_2.db
     - DbFile_2_N.db
     \BDB_SUBDIR_M
     - DbFile_M_1.db
     - DbFile_M_2.db
     - DbFile_M_N.dbOn the client site, the environment directory structure will be incorrectly replicated and will look something similar to this (with all database files ending up under one of the subdirectories):
\BDB_ENV_HOME
     \BDB_SUBDIR_1
     \BDB_SUBDIR_2
     \BDB_SUBDIR_M
     - DbFile_1_1.db
     - DbFile_1_2.db
     - DbFile_1_N.db
     - DbFile_2_1.db
     - DbFile_2_2.db
     - DbFile_2_N.db
     - DbFile_M_1.db
     - DbFile_M_2.db
     - DbFile_M_N.dbThe workaround to resolve this issue depends on a manual hot backup. AUTOINIT should be turned off via rep_set_config with DB_REP_CONF_AUTOINIT and 0. Than the client should be bootstrapped with the databases and logs from the master and recovery should be run as described in the Berkeley DB Programmer's Reference Guide, in the Hot failover section.
Basically, copy all the databases, copy the logs, run catastrophic recovery on the new client environment directory, and start the application. By turning off AUTOINIT you might need to take care of handling the REP_JOIN_FAILURE event error.
To summarize, the workaround implies the following actions:
1. On the client environment call DbEnv::rep_set_config like this:
DbEnv::rep_set_config(DB_REP_CONF_AUTOINIT, 0);With the C# API it's something like:
DatabaseEnvironmentConfig envConfig = new DatabaseEnvironmentConfig();
envConfig.RepSystemCfg = new ReplicationConfig();
envConfig.RepSystemCfg.AutoInit = false;
DatabaseEnvironment env = DatabaseEnvironment.Open(envHomeDir, envConfig);or you could use the DatabaseEnvironment's class RepAutoInit property.
2. Handle DB_REP_JOIN_FAILURE on the client environment, which could be returned from DbEnv::rep_process_message. Handling implies setting an event callback function via set_event_notify for DB_EVENT_REP_JOIN_FAILURE like this:
DbEnv::set_event_notify(eventsHandler);where eventsHandler is a callback function that respects this signature:
void (*db_event_fcn)(DB_ENV *dbenv, u_int32_t event, void *event_info)and internally checks to see if event is DB_EVENT_REP_JOIN_FAILURE. If it is, it may trigger copying of the backup files from the master onto the client.
With the C# API you will set an EventNotifyDelegate delegate using the EventNotify property and check the NotificationEvent.
3. Start the client. Because AUTOINIT is turned off, internal init will not be performed, hence it will not remove the directory structure on the client environment.
4. If the event callback function gets notified of the DB_EVENT_REP_JOIN_FAILURE it means that the backup of the master (databases and log files of the master) is required on the client. Take a manual hot backup as per the guidelines in the Hot failover section, and copy the database and log files onto the client; this is something that the event callback function can do, when it handles DB_EVENT_REP_JOIN_FAILURE by using something like rsync to copy the files between the machines.
5. If a backup was copied onto the client, run a catastrophic recovery in the client environment either manually via db_recover -c, or programmatically by specifying the DB_RECOVER_FATAL flag to the client's DbEnv::open call (with the C# API you specify it via RunFatalRecovery)
6. After the catastrophic recovery will have been performed and the client will have started, all the replication synchronization will work as expected, replication messages will be processed correctly, and the directory structure will be maintained.
Regards,
Andrei

After upgrading recently I got this message: "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." The music/video files are still on my MacBook Pro. Is it because I'm still on 10.5.8? How do I fix this?

For your reference I’m using a MacBook Pro running 10.5.8. Several weeks ago on a Monday I received an upgrade for iTunes. When Tuesday arrived I attempted to log in so that I could download the latest freebie song(s). I was met w/this message: “The file ‘iTunes Library.itl’ cannot be read because it was created by a newer version of iTunes.”
The music/video files are still on my Mac (I’ve verified that via Searchlight), but I’m unable to open the program. Since I know that 10.5.8 is rapidly becoming prehistoric, could it be that the newest iTunes isn’t compatible w/this particular OS? I’d like to switch up, but understand that the newest OS won’t work on a Mac of this vintage (6 years old). In addition, my Adobe products (all CS2) won’t work w/anything newer than 10.5.8, so I’m reluctant to go to a newer OS (I just can’t afford the Adobe upgrade $$$ @ this point).
Is there any way to get a download of an “old” iTunes version? If there were, I’d simply refuse any future upgrades until my personal economy allows me to stop working as if it were 2006. Please advise, somebody!

I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I can't open a file in OS 922 that was created in OS X.

The web-pages I downloaded while in OS X (and stored in the HD) appear blank, (white, no logo) when I am booted in OS 922. When I try to open them, I receive a message "Sorry, could not open because the application that created it could not be found".
So OS 922 cannot find an application (in this case do they mean Safari or OSX ?) that created the file. Sounds logical since OS X didn't exist when OS 922 was created. And Safari neither I think (if that plays any role)
Question: does the Internet connection (Internet Explorer vs. Safari play any role ?)
I have no problem whatsoever with files downloaded with Internet Explorer (5.1.6 or previous versions I had). Or from OS 9.0.4 to 9.2.2.
Nor do I with photos (even with Safari and OS X) .
Only web-pages and documents (including TextEdit) done with OS X. And not all files but half of them.
G4 Mac OS X (10.4.7)

Hi, I need -
OS 9's Finder uses File Type and Creator codes embedded in files to determine how the file should be handled - what program to use to open it, and how that program should process the file.
OSX uses filename extensions rather than File Type and Creator codes.
As a result, it is not uncommon for a file created in an OSX environment to be displayed as a generic unknown-type document when the machine is booted to OS 9; and for Finder to not know how to handle it when it is double-clicked.
If you know that a certain program in OS 9 should be able to open a file, try dropping that file onto the icon for that program (or on an alias to that program) - some programs are capable of trying to open a file done that way; others won't even try.
In most cases, a file created by an OSX app will not be openable by an OS 9 app - this is understandable, given that newer programs often use more advanced formats than older ones, even versions of the same program.
If you know that you will be transporting a file from OSX to OS 9, try saving it in a form accessible by OS 9 - many programs will offer a list of alternate file formats when you do a Save As of the file, or (in some cases) an Export of it.
Question: does the Internet connection (Internet Explorer vs. Safari play any role ?)
It certainly can. If Safari saves a file in a proprietary format, then IE will probably not be able to open it. However, a file saved in plain html should be openable by most any browser.
You might experiment with the settings in OS 9's File Exchange control panel, particularly the ones listed under PC Exchange. Adjusting some of these, or creating new linkages, may allow OS 9 to handle files which are openable by your OS 9 programs, but which are not identifiable by Finder.

Need to edit a form that was created by someone else.

Hello, I have to edit a form that was created by someone else. I made numerous changes to the text and repositioned a lot of the items, and it appeared fine on my computer. However, when I open it on my PC and other systems, the fonts are substituting and I'm getting strange characters where I changed the text. I tried embedding the fonts with the Preflight embed fonts, but it is still messed up. My client is anxious...not sure what else to check. Any help would be appreciated!

You don't need to re-do the fields. If you create a new version of the PDF
file just open the old one and use the Replace Pages command to insert the
pages from the new version over the old ones. This will give you a new
version of the file, with the existing form fields still in tact. Of
course, you might need to adjust their location and/or size, but at least
you won't have to start all over again...
On Thu, Jan 22, 2015 at 11:59 PM, Laura Holancin <[email protected]>

How to include a .lvlib in a build that was created using a custom .dll

I am trying to build an executable in LV2010 that uses a .lvlib that was created using a .dll from Keyence. I have added the .lvlib to the source files as "Always Included" and I have also added all of the .vi files of the library to "Always Included." I still get the error saying "Missing External Function" when running the program. The executable seems to open fine on the development computer but not on a secondary computer. Any ideas?
Solved!
Go to Solution.

...I assumed too quickly that the problem was resolved. By specifying the path I was actually able to open the executable after installing but none of the .dll functions worked. I noticed that when I specified a path on the diagram, the .dll was no longer included in the dependencies and was no longer included in the build. I guess this would explain why none of the functions were working. I copied the .dll over to the path specified on the diagram and it still did not function.
This brings me back to the original problem I was facing. I actually removed the .lvlib. I replaced all of the library vi references with the Call Library Function and deselected the "Specify path on diagram" Boolean. When I do this, the build includes the .dll in the dependencies list and it includes the .dll file in the destination folder of the install. However, when running the executable I get a list of errors that read, "Missing external function …” I have attached an image of this error. This is the same error that occurred when I was using the library, but I thought maybe the library was the cause of the problem, which is why I used the Call Library Function instead.
*I have tried adding the .dll to the support files and I receive the same error when trying to run the executable.
*I have tried adding the .dll to the support files and making it an “always include” in the installer properties under source files. This returns the same error.
I’m really not sure where to go from here. Any help is greatly appreciated!
Attachments:
Call Library Function.jpg ‏56 KB
Error.JPG ‏23 KB

Creating an embedded Konsole in KDE, need help with "Window Rules"

Hey guys! I hate that my first post on here is asking for help, but here goes nothing:
I've been working on creating an embedded konsole that sits on your desktop, without installing any 3rd party software. The konsole will have certain properties set so that it has no title bar, no border, no task bar entry, completely transparent, etc, so that only the konsole text itself is seen.
I was able to set up the konsole profile and window settings successfully using this link as a guide. The only problem is that using the aforementioned link's method creates a persistent profile that affects all future konsoles.
My goal is to auto start a single konsole that uses a specified konsole profile and a specified window rule, but doesn't affect any other konsoles I open after startup. I've recently learned that a konsole profile can be specified with the "-profile" option which solves the first half, but I still can't figure out a way to have my window rule apply to only the startup konsole and no others.
I'm new to Arch and KDE, so any suggestions would be greatly appreciated.
Thanks!
-Grey

Look at http://userbase.kde.org/KWin_Rules and particularly 'Window Matching'.
Maybe (I didn't test it) using:
Window title - restrict the match to the title of the window.
and
KDE options:
--caption <caption> Use 'caption' as name in the titlebar
Or finding some specific matching rule which applies only to that window...

Retrieve the date a file was created in the background

EDITED CONTENT----
Apologies all...I just realized there is a specific forum for this type of question. I will post it there.
Thanks Marilyn for point this out>>>>should have read it first as suggested.
/message/2572763#2572763 [original link is broken]
Hi guru's,
I have a custom application that does some windows directory cleaning based an older than 'X' days setting. I have to do some calculation to determine if the file being processed is older than that number of day and delete it if it is. To determine the file created date I use the method DIRECTORY_LIST_FILES from CL_GUI_FRONTEND_SERVICES. This works great in the foreground but dumps in the background because the handle object reference is not created in the class constructor and subsequently does a call to a "NULL" object.
My question:
Does anyone know of a way to get the date a file was created while running in the background? If not, please read on --- I have another question regarding an alternate approach I am trying.
I have tried the following approach FM EPS_GET_DIRECTORY_LISTING to return an internal table with all files in a directory. Works fine in the background, but the created date is not in the return values. Soooooo I looped at the internal table and called this system function:
        CALL 'C_FILE_ATTRIBUTES'
            ID 'NAME'     FIELD tempfile
            ID 'TYPE'     FIELD singleFile-
            ID 'LEN'      FIELD file-len
            ID 'OWNER'    FIELD file-owner
            ID 'MTIME'    FIELD file-mtime
            ID 'MODE'     FIELD file-mode
            ID 'ERRNO'    FIELD file-errno
            ID 'ERRMSG'   FIELD file-errmsg.
This returns the MTime, which is the Modified time (in Epoch time format: number of seconds since Midnight 1 January 1970), but no created time. Does anyone know the ID for the created time? I tried CTIME but no value is returned.
Along with this question: any idea if a FM or Method exists to convert Epoch time to a standard time. I could do the calculation myself....but it seems someone would have already done this. No point in re-creating the wheel.
Thanks so much,
Quack
Message was edited by:
        Ryan Quackenboss

I will be happy to.
Please post something to this thread.
Retrieve the date a file was created in the background
I UNMARKED this question as a post and reposted in the data transfer forum.
That post is still open. Once you post there, I will mark it ANSWERED and award points.
Thanks for the help
Quack

Determine the Version (File Format) in which the report was created.

I have an application which hosts various reports, these reports are all in Crystal 8.5. I want to switch some of these reports to Crystal 11 reports and also add new reports. Hence I will be displaying both Crystal 8.5 and Crystal 11 report in my application. Is there a way to determine the File Format Schema / Version in which the Crystal report was created at run-time so that i can then call the instance of that specific report viewer on my form and display the report. My Application uses VB6.
thank you.

Hello,
Moved to Legacy SDK forum.
Yes, use the Object browser for the RDC and search on major and minor version you'll find info on how to get the report version.
If you can't figure it out I'll up date the post tomorrow with sample code.
Now that I have my test machine going again with VS 6 running I looked and I lied, the RDC only returned the version of the engine and not the report. The new CR Assemblies will allow you to get the report version.
Thank you
Don
Edited by: Don Williams on Dec 12, 2010 2:32 PM

Interop assembly generates AccessViolationException

Hi,
I am writing a .Net application that needs to read/write to an FPGA via DMA. To do this I've written some LabVIEW VIs that do the read/write, generated a .net interop assembly and successfully incorportated this into my application. The APIs generated by the LabVIEW builder are
public static void ReadDma32(int Channel, int DataBufferSize, out uint[] Data, out int NumberOfEntriesRead, out int ReadResult);
where the channel parameter identifies which DMA FIFO should be accessed. The ReadDma32 calls block until they have any data to return so it's an asynchronous process. This all works fine until I want to read from two different DMA channels at the same time. I then get a AccessViolationException with the message "Attempted to read or write protected memory. This is often an indication that other memory is corrupt." I assume this is because of some marshalling issue when two different threads call the same method at the same time. I've tried changing the execution settings (reentrant execution) on the ReadDma32 vi but this has no effect.
Does anyone have any suggestion on how to solve this issue? My only idea so far is to remove the channel parameter from the method signature and have separate read/write dma methods for each DMA FIFO defined. Not very elegant.
thanks,
Ralph
public static void WriteDma32(int channel, uint[] data, out int writeResult);

I have created interop dll for labview VI's.
I am using interop dll in .NET environment.
The method signature is
public static void ReconstructRawData(byte COMPort, double[] FlowValuesFullScaleFlow, double[] TemperaturesC, ErrorCluster errorin, byte Gastype, bool ValueFormatrealunitsFalse, out ushort GasDensity, out double[,] RawData, out ushort MaxFlow, out ushort GasID, out ErrorCluster errorout);
I am calling as shown below
byte bComPort = byte.Parse("1");
byte bGasType = byte.Parse("6");
bool blnValueFromatFalse = false;
ushort GasDensity = 0;
double[,] RawData = new double[100, 100];
//double[][] RawData = null;
ushort MaxFlow = 0;
ushort GasID = 0;
ErrorCluster ErrorIn = new ErrorCluster();
double[] dblFlowValue = new double[2];
dblFlowValue[0] = 20;
dblFlowValue[1] = 50;
double[] dblTempValue = new double[2];
dblTempValue[0] = 10;
dblTempValue[2]= 20;
But i am getting memory error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt"
Stack Trace:at System.Runtime.InteropServices.Marshal.ReadInt32(IntPtr ptr, Int32 ofs)
at System.Runtime.InteropServices.Marshal.ReadIntPtr(IntPtr ptr)
at NationalInstruments.LabVIEW.Interop.DataMarshal.MarshalArrayOut(Type arrayType, IntPtr data)
at NationalInstruments.LabVIEW.Interop.DataMarshal.MarshalOutputArray(IntPtr entryPointDataSpace, Type arrayType, Int32 terminalIndex)
Now hot to send RawData(multidimentional array) to an method of interop dll?
I have created interop dll for labview VI's.I am using interop dll in .NET environment
.The method signature is
public static void ReconstructRawData(byte COMPort, double[] FlowValuesFullScaleFlow, double[] TemperaturesC, ErrorCluster errorin, byte Gastype, bool ValueFormatrealunitsFalse, out ushort GasDensity, out double[,] RawData, out ushort MaxFlow, out ushort GasID, out ErrorCluster errorout)
;I am calling as shown below
byte bComPort = byte.Parse("1");
byte bGasType = byte.Parse("6");
bool blnValueFromatFalse = false;
ushort GasDensity = 0;
double[,] RawData = new double[100, 100];
ushort MaxFlow = 0;
ushort GasID = 0;
ErrorCluster ErrorIn = new ErrorCluster();
double[] dblFlowValue = new double[2];dblFlowValue[0] = 20;dblFlowValue[1] = 50;
double[] dblTempValue = new double[2];dblTempValue[0] = 10;dblTempValue[2]= 20;
But i am getting memory error "Attempted to read or write protected memory.This is often an indication that other memory is corrupt"
Stack Trace:
at System.Runtime.InteropServices.Marshal.ReadInt32(IntPtr ptr, Int32 ofs)at System.Runtime.InteropServices.Marshal.ReadIntPtr(IntPtr ptr)at NationalInstruments.LabVIEW.Interop.DataMarshal.MarshalArrayOut(Type arrayType, IntPtr data)at NationalInstruments.LabVIEW.Interop.DataMarshal.MarshalOutputArray(IntPtr entryPointDataSpace, Type arrayType, Int32 terminalIndex)
Now hoW to send RawData(multidimentional array) to an method of interop dll?

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

I have the following error The file "iTunes library.itl" cannot be read because it was created by a newer version of iTunes

Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks

Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden

I have had to unistall itunes and re install it. Now I get a error message - The file 'itunes library itl' cannot be read because it was created by a newer version of itunes. Help?

I had a prompt to update the software, when this was updated i tunes would not open coming up with a 404 error message. So I uninstalled it, reinstalled the 64 bit version for windows, now it wont open with the mentioned error message.

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

A reference was created to embedded interop assembly

Similar Messages

Maybe you are looking for