A script is needed

hi
i need to feel this table with '#' sign at a certain place showing up with a nice tween. than i need to switch each one in a differnt frame into to a number. 100 '#' turn into a 100 numbers in arround 5-7 sec. i was trying to make #_mc symbol than mc_anim_# for the tween and than but than i cant set up each one for a differnt timing cause the symbol is the same one so im sure im not doing it right and should be done by a script which im not so fermiliar with yet.
any ideas guys???
thanks.

hi kglad
the # is text so no shape tween in involved. it come from the left to the right in a motion tween (default preset of come on from left).after being there for a few frames it comes out the way it came in and a number comes in.that should happen in all 100 boxes begining from "user a" the first box and than afterstarting filling the line of "user a" and the vertical first line growing to the whole table. i hope i succesided to explain my self. if its to complicated let me know.
thank you so much.

Similar Messages

Ihave created a script, i need to email in pdf format.

Hi Experts,
There are 2 criterias...
1. criteria
I have created a script, i need to mail it. Please give me a step by step guide to perform it .. . Please give the comments in all the functional module to be used.
Do we have to write a separate program to send email or in the same program. i'll post my program along with this mail. I'm using this program to display report after delivery on that particular date.
REPORT ZREPORTTOEMAIL LINE-SIZE 400.
data : count, i type i.
TABLES : VBFA,         "Sales Document Flow
          VBAK,
          KNA1,
          VBKD,
          VBAP,
          LIPS,
          LIKP,
          KONP,
          KOMK,
          KOMP,
          zkna1,
          konv.
data : l_vbeln like vbfa-vbeln,
       l_posnr like vbfa-posnn,
       l_KNUMV like vbak-KNUMV,
       L_BILL_ITEM LIKE vbfa-posnn ,
       l_netwr like vbrp-netwr,
       l_MWSBP like vbrp-mwsbp.
DATA: BEGIN OF TKOMV OCCURS 50.
        INCLUDE STRUCTURE KOMV.
DATA: END OF TKOMV.
DATA: BEGIN OF TKOMVD OCCURS 50.
        INCLUDE STRUCTURE KOMVD.
DATA: END OF TKOMVD.
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
      HEADING TYPE SLIS_T_LISTHEADER,
      LAYOUT   TYPE SLIS_LAYOUT_ALV,
      EVENTS   TYPE SLIS_T_EVENT,
      REPNAME LIKE SY-REPID,
      F2CODE   LIKE SY-UCOMM VALUE '&ETA',
      G_SAVE(1) TYPE C,
      G_EXIT(1) TYPE C,
      G_VARIANT LIKE DISVARIANT,
      GX_VARIANT LIKE DISVARIANT.
DATA: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
DATA: BEGIN OF itab occurs 0,
        kunnr like likp-kunnr,      "ship to party
        NAME2   LIKE KNA1-NAME1,   "text
        ORT01   LIKE KNA1-ORT01,   "City
        BSTNK   LIKE VBAK-BSTNK,   "customer P O
        BSTDK   LIKE VBAK-BSTDK,   "date
        vbeln like likp-vbeln,      "delivery
        ernam like likp-ernam,      "person
        vstel like likp-vstel,      "shipping point
        vkorg like likp-vkorg,      "sales org
        lfdat like likp-lfdat,      "delivery date
        kunag like likp-kunag,      "sold to party
        NAME1   LIKE KNA1-NAME1,   "text
        bil_to like VBAK-KUNNR,
        name3 like kna1-name1,
        traid like likp-traid,      "transport/vehicle no
        BOLNR LIKE LIKP-BOLNR,
        wadat_ist like likp-wadat_ist, "good mov. date
        posnr like lips-posnr,      "item
        matnr like lips-matnr,      "material
        arktx like lips-arktx,      "item text
        matkl like lips-matkl,      "mat group
        werks like lips-werks,      "plant
        lgort like lips-lgort,      "stoage location
        lfimg like lips-lfimg,      "del qty
        MEINS LIKE LIPS-MEINS,
        vrkme like lips-vrkme,      "sales unit
        UMVKZ LIKE LIPS-UMVKZ,
        UMVKN LIKE LIPS-UMVKN,
        charg like lips-charg,      "batch
        vgbel like lips-vgbel,      "reference doc
        mtart like lips-mtart,      "mat type
        vkbur like lips-vkbur,      "sales office
        vkgrp like lips-vkgrp,      "sales group
        vtweg like lips-vtweg,      "Distribution Channel
        spart like lips-spart,      "division
        billno like vbak-vbeln,
        basic like komvd-kwert,
        budat like bkpf-budat,
        fin_amt like vbrp-NETWR,
END OF itab.
data : begin of jtab occurs 0,
kunnr like likp-kunnr,
name2 like kna1-name2,
vbeln like likp-vbeln,
zkunnr like zkna1-zkunnr,
zname like zkna1-zname,
end of jtab.
SELECTION-SCREEN SKIP 1 .
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE TEXT-003.
SELECT-OPTIONS   : ABC FOR LIKP-WADAT_IST DEFAULT SY-DATUM
                              NO INTERVALS   .
SELECT-OPTIONS   : S_MATNR FOR LIPS-MATNR NO INTERVALS   .
SELECT-OPTIONS   : S_VKORG FOR LIKP-VKORG NO INTERVALS.
SELECT-OPTIONS   : S_VSTEL FOR LIKP-VSTEL NO INTERVALS.
SELECT-OPTIONS   : S_VKBUR FOR LIKP-VKBUR NO INTERVALS.
SELECT-OPTIONS   : S_VKGRP FOR LIPS-VKGRP.
SELECT-OPTIONS   : S_SPART FOR LIPS-SPART.
SELECT-OPTIONS   : S_VBELN3 FOR LIKP-VBELN.
SELECT-OPTIONS   : S_MATKL FOR LIPS-MATKL NO INTERVALS,
                   S_KUNAG FOR LIKP-KUNAG.
SELECTION-SCREEN END OF BLOCK BLOCK1.
select * from likp into corresponding fields of itab
              WHERE WADAT_IST IN ABC
              AND    VBELN IN S_VBELN3
              AND    VKORG IN S_VKORG
              and VSTEL in S_VSTEL
              AND VKBUR IN S_VKBUR
              and lfart like 'Z%'
              AND    VBTYP = 'J'
              AND KUNAG IN S_KUNAG.
select * from lips into corresponding fields of itab
                WHERE VBELN = ITAB-VBELN
                AND   MATNR IN S_MATNR
                AND   MATKL IN S_MATKL
                AND VKBUR IN S_VKBUR
                AND VKGRP IN S_VKGRP
                AND SPART IN S_SPART.
IF ITAB-VRKME = 'RM' AND ITAB-MEINS = 'KG'.
ITAB-LFIMG = ITAB-LFIMG * ( ITAB-UMVKZ / ITAB-UMVKN ).
ITAB-VRKME = 'KG'.
ENDIF.
SELECT SINGLE BSTNK BSTDK INTO (ITAB-BSTNK,ITAB-BSTDK) FROM VBAK
                 WHERE VBELN = ITAB-VGBEL.
SELECT SINGLE NAME1 ORT01 FROM KNA1 INTO (ITAB-NAME2,ITAB-ORT01)
                             WHERE KUNNR = ITAB-KUNNR.
SELECT SINGLE NAME1 FROM KNA1 INTO ITAB-NAME1
                             WHERE KUNNR = ITAB-KUNAG.
*select single vbeln POSNN into (itab-billno,L_BILL_ITEM) from vbfa where VBELV = itab-vbeln
*and POSNV = itab-posnr and VBTYP_N in ('M','U').
select vbeln POSNN from vbfa up to 1 rows into (itab-billno,L_BILL_ITEM)   where VBELV = itab-vbeln
and POSNV = itab-posnr and VBTYP_N in ('M','U') order by vbeln DESCENDING .
endselect.
select single * from vbfa where vbelv = itab-billno and posnv = l_bill_item and
vbtyp_n = 'N'.
if sy-subrc = 0.
clear : itab-billno, l_bill_item.
endif.
select single budat from bkpf into itab-budat where xblnr = itab-billno and
blart = 'RV'.
select single NETWR MWSBP into (l_netwr, l_MWSBP) from vbrp where vbeln = itab-billno
and posnr = l_bill_item.
itab-fin_amt = l_netwr + l_MWSBP.
clear : l_netwr, l_MWSBP.
select single kunnr from vbpa into itab-bil_to where
vbeln = itab-BILLNO and PARVW = 'RE'.
select single name1 into itab-name3 from kna1
where kunnr = itab-bil_to.
*select single VBELV POSNV from vbfa into (l_vbeln,l_posnr)
*where VBELN = itab-vbeln and
*POSNN = itab-posnr and VBTYP_N = 'J'.
*select single VBELN POSNN from vbfa into (l_vbeln,l_posnr)
*where VBELV = itab-vbeln and
*POSNV = itab-posnr and VBTYP_N = 'M'.
select VBELN POSNN from vbfa up to 1 rows into (l_vbeln,l_posnr)
where VBELV = itab-vbeln and
POSNV = itab-posnr and VBTYP_N = 'M' order by vbeln DESCENDING.
endselect.
select single * from vbfa where vbelv = l_vbeln and posnv = l_posnr and
vbtyp_n = 'N'.
if sy-subrc = 0.
clear : l_vbeln, l_posnr.
endif.
if sy-subrc = 0.
*select single KNUMv into l_KNUMv from vbak where vbeln = l_vbeln
select single KNUMv into l_KNUMv from vbRk where vbeln = l_vbeln
select * from konv where knumv = l_knumv and kposn = l_posnr and
kschl in ('ZR00','ZR01','ZR02','ZOBC').
itab-basic = itab-basic + KONV-KBETR.
ENDSELECT.
else.
*select single KNUMv into l_KNUMv from ekko where ebeln = itab-vgbel.
*select single KBETR from konv into itab-basic where knumv = l_knumv
*and kposn = itab-posnr and kschl = 'P101'.
select single KNUMv into l_KNUMv from VBRK where VBELN = itab-BILLNO.
select * from konv where knumv = l_knumv and kposn = l_BILL_ITEM AND
kschl in ('ZR00','ZR01','ZR02','ZOBC').
itab-basic = itab-basic + KONV-KBETR.
ENDSELECT.
*zkna1-zkunnr = itab-kunnr.
*insert zkna1.
endif.
     clear : l_vbeln, L_BILL_ITEM, L_POSNR.
APPEND ITAB.
clear : itab-basic, itab-lfimg.
     ENDSELECT.
          clear : itab.
ENDSELECT.
<b>perform zscript.</b>
*&      Form zscript
      text
--> p1        text
<-- p2        text
FORM zscript .
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
DIALOG                            = 'X'
   FORM                              = 'ZREPORT2EMAIL'
   LANGUAGE                          = SY-LANGU
OPTIONS                           =
MAIL_SENDER                       =
MAIL_RECIPIENT                    =
MAIL_APPL_OBJECT                  =
RAW_DATA_INTERFACE                = '*'
SPONUMIV                          =
IMPORTING
LANGUAGE                          =
NEW_ARCHIVE_PARAMS                =
RESULT                            =
EXCEPTIONS
CANCELED                          = 1
DEVICE                            = 2
FORM                              = 3
OPTIONS                           = 4
UNCLOSED                          = 5
MAIL_OPTIONS                      = 6
ARCHIVE_ERROR                     = 7
INVALID_FAX_NUMBER                = 8
MORE_PARAMS_NEEDED_IN_BATCH       = 9
SPOOL_ERROR                       = 10
CODEPAGE                          = 11
OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'MANU'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
ELEMENT                        = 1
FUNCTION                       = 2
TYPE                           = 3
UNOPENED                       = 4
UNSTARTED                      = 5
WINDOW                         = 6
BAD_PAGEFORMAT_FOR_PRINT       = 7
SPOOL_ERROR                    = 8
CODEPAGE                       = 9
OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SEND_ERROR                     = 3
SPOOL_ERROR                    = 4
CODEPAGE                       = 5
OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " zscript
The above one is first criteria just to understand how to send mail to the customers.
<b>Second criteria</b> is i have to send the mail to the particular customer with only their details, the process should continue until it sends to all the customers with their details for that particular date.
Please help me out.
I have seen so many posts in the sdn but not able to understand the functional modules, how they declare that and how does it works...
Please provide me a good material to understand the functional module and to declare them.
Please solve this query i'll reward them with very good points.
Thanks in advance.
A.Rafique.

Hi babar haroon,
Thanks for the link.....
I went through that link, i created smart form but i was not able to get the results because the pgm gets terminated after executing. I'll show u the code, the code is active. Please check out and tell me if i have missed anything in the code...
*& Report ZZZ_TEST3
REPORT ZZZ_TEST3.
*internal table declarations
data: i_otf type itcoo occurs 0 with header line,
      i_tline type table of tline with header line,
      i_receivers type table of somlreci1 with header line,
      i_record like solisti1 occurs 0 with header line,
*Objects to send mail.
      i_objpack like sopcklsti1 occurs 0 with header line,
      i_objtxt like solisti1 occurs 0 with header line,
      i_objbin like solisti1 occurs 0 with header line,
      i_reclist like somlreci1 occurs 0 with header line,
*workarea declaration.
      w_objhead TYPE soli_tab,
      w_ctrlop TYPE ssfctrlop,
      w_compop TYPE ssfcompop,
      w_return TYPE ssfcrescl,
      w_doc_chng typE sodocchgi1,
      w_data TYPE sodocchgi1,
      w_buffer TYPE string,"To convert from 132 to 255
Variables declarations
      v_form_name TYPE rs38l_fnam,
      v_len_in LIKE sood-objlen,
      v_len_out LIKE sood-objlen,
      v_len_outn TYPE i,
      v_lines_txt TYPE i,
      v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
*call function '/1BCDWB/SF00000105'
      exporting
      formname = 'ZZZ_TEST2'
      importing
      fm_name = v_form_name
      exceptions
      no_form = 1
      no_function_module = 2
      others = 3.
      IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      w_ctrlop-getotf = 'X'.
      w_ctrlop-no_dialog = 'X'.
      w_compop-tdnoprev = 'X'.
     CALL FUNCTION '/1BCDWB/SF00000105'
      EXPORTING
        ARCHIVE_INDEX              =
        ARCHIVE_INDEX_TAB          = itab1
        ARCHIVE_PARAMETERS         =
        CONTROL_PARAMETERS         =
        MAIL_APPL_OBJ              =
        MAIL_RECIPIENT             =
        MAIL_SENDER                =
        OUTPUT_OPTIONS             =
        USER_SETTINGS              = 'X'
      IMPORTING
        DOCUMENT_OUTPUT_INFO       =
        JOB_OUTPUT_INFO            = wa
        JOB_OUTPUT_OPTIONS         =
      EXCEPTIONS
        FORMATTING_ERROR           = 1
        INTERNAL_ERROR             = 2
        SEND_ERROR                 = 3
        USER_CANCELED              = 4
        OTHERS                     = 5
     IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
CALL FUNCTION v_form_name
      EXPORTING
      control_parameters = w_ctrlop
      output_options = w_compop
      user_settings = 'X'
      IMPORTING
      job_output_info = w_return
      EXCEPTIONS
      formatting_error = 1
      internal_error = 2
      send_error = 3
      user_canceled = 4
      OTHERS = 5.
      IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      i_otf[] = w_return-otfdata[].
      CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
      format = 'PDF'
      max_linewidth = 132
      IMPORTING
      bin_filesize = v_len_in
      TABLES
      otf = i_otf
      lines = i_tline
      EXCEPTIONS
      err_max_linewidth = 1
      err_format = 2
      err_conv_not_possible = 3
      OTHERS = 4.
      IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      Convert PDF from 132 to 255.
      LOOP AT i_tline.
      Replacing space by ~
      TRANSLATE i_tline USING '~'.
      CONCATENATE w_buffer i_tline INTO w_buffer.
      ENDLOOP.
Replacing ~ by space
      TRANSLATE w_buffer USING '~'.
      DO.
      i_record = w_buffer.
      Appending 255 characters as a record
      APPEND i_record.
      SHIFT w_buffer LEFT BY 255 PLACES.
      IF w_buffer IS INITIAL.
      EXIT.
      ENDIF.
      ENDDO.
      Refresh: i_reclist,
      i_objtxt,
      i_objbin,
      i_objpack.
      clear w_objhead.
      Object with PDF.
      i_objbin[] = i_record[].
     DESCRIBE TABLE i_objbin LINES v_lines_bin.
      Object with main text of the mail.
      i_objtxt = 'Find attached the output of the smart form.'.
      APPEND i_objtxt.
     DESCRIBE TABLE i_objbin LINES v_lines_txt.
      i_objtxt = 'Regards,'.
      APPEND i_objtxt.
      i_objtxt = 'J.Jayanthi'.
      APPEND i_objtxt.
      DESCRIBE TABLE i_objtxt LINES v_lines_txt.
      Document information.
      w_doc_chng-obj_name = 'Smartform'.
      w_doc_chng-expiry_dat = sy-datum + 10.
      w_doc_chng-obj_descr = 'Smart form output'.
      w_doc_chng-sensitivty = 'F'. "Functional object
      w_doc_chng-doc_size = v_lines_txt * 255.
      Pack to main body as RAW.
      Obj. to be transported not in binary form
      CLEAR i_objpack-transf_bin.
      Start line of object header in transport packet
      i_objpack-head_start = 1.
      Number of lines of an object header in object packet
      i_objpack-head_num = 0.
      Start line of object contents in an object packet
      i_objpack-body_start = 1.
      Number of lines of the object contents in an object packet
      i_objpack-body_num = v_lines_txt.
      Code for document class
      i_objpack-doc_type = 'RAW'.
      APPEND i_objpack.
      Packing as PDF.
      i_objpack-transf_bin = 'X'.
      i_objpack-head_start = 1.
     i_objpack-head_num = 1.
      i_objpack-head_num = 0.
      i_objpack-body_start = 1.
      i_objpack-body_num = v_lines_bin.
      i_objpack-doc_type = 'PDF'.
      i_objpack-obj_name = 'Smartform'.
      CONCATENATE 'Smartform_output' '.pdf'
      INTO i_objpack-obj_descr.
      i_objpack-doc_size = v_lines_bin * 255.
      APPEND i_objpack.
      Document information.
      CLEAR i_reclist.
      e-mail receivers.
     i_reclist-receiver = '[email protected]'.
      i_reclist-receiver = '[email protected]'.
      i_reclist-express = 'X'.
      i_reclist-rec_type = 'U'. "Internet address
      APPEND i_reclist.
      Sending mail.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
      document_data = w_doc_chng
      put_in_outbox = 'X'
      TABLES
      packing_list = i_objpack
      object_header = w_objhead
      contents_hex = i_objbin
      contents_txt = i_objtxt
      receivers = i_reclist
      EXCEPTIONS
      too_many_receivers = 1
      document_not_sent = 2
      document_type_not_exist = 3
      operation_no_authorization = 4
      parameter_error = 5
      x_error = 6
      enqueue_error = 7
      OTHERS = 8.
      IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
Please reply me back, it is very urgent..
Thanks and regards.
A.Rafique

Custom Calculation Script Help Needed

I need to make a script that Sums a column of fields based on whether or not information found in another column of fields is the same or specific text. Please see below screenshot of what I would like it to do.
I would like a Sum of all Amounts that have the Code A...

You can use this script as the custom calculation script of "SumOfA":
var total = 0;
for (var i=0; i<=2; i++) {
if (this.getField("p1TC."+i).value=="Code A")
total+=Number(this.getField("p1RecIn."+i).value);
event.value = total;
You can easily adjust it for the other field as well.

Hyperlink Scripting Solution Needed

Perhaps there is already a way to do this that I am missing that doesn't involve scripting, but I will post here nonetheless. I am in need of a script or extension that takes all the product numbers I have on a page (they can easily be found with GREP..are usually ISBNs) and attaches the appropriate URL to them so they will be linked to products on our website. I have the current data source with each product, product number, and it's URL in Excel format.
Any suggestions would be appreciated as I have been copying and pasting for quite some time and I still have 200 pages to go. Thanks in advance!

What you could try is:
Find with a GREP all product numbers. Change (also with GREP) to the
full URL that you need -- I presume this is simply a question of adding
some sort of URL prefix to the product number.
Then run InDesign's automatic "Create hyperlinks" command.
Then GREP out the URL part again, leaving only the original product
number (easy to do if you gave it a different color or something initially).
If that doesn't work, sounds like you would need a script.

Syslinux Installer / Update Script - Testers Needed

For those who don't follow the ML that closely....
Hello Community,
Over the last few weeks I have been working on Syslinux support for the installer. With the help Thomas and Dieter I am nearing the completion of this project. As part of this project, I have written a script that will help install and update Syslinux (similar to that of grub-install).
Some key features of the script: syslinux-install_update.sh
* Install Syslinux to the FS + Partition Boot Loader (extlinux --install /boot/syslinux)
* Install Syslinux MBR
* Detect and optionally set the boot flag on the boot partition
* Update Syslinux – copy files and execute (extilnux --update /boot/syslinux)
* Support for GPT disks
* Support for RAID configurations
The goal is to include this script in the official Syslinux package. Therefore we need your help to test it.
syslinux-install_update.sh -i -a -m ..... install Syslinux, set the boot flag (if needed), and install the MBR
We need tests for the following setups:
/ + /boot on the *same* partition
/ + /boot on the *same* partition - RAID
/boot + root on *separate* partition
/boot + root on *separate* partition - RAID
All of the above using but using the GPT partition layout
NOTE: This is an alpha/beta stage script. The script modifies the first 440 bytes of the disk (using dd) and the partition table (using either sfdisk or sgdisk). Although the script should be safe to run, I am not responsible for any data loss that may occur.
Let us know the following:
* Did the script work for you?
* What was your partition setup? (see above)
* What version did you use?
* If the script did not work, please provide as much information as possible
Get the script here: https://gist.github.com/772138
Syslinux Sample Config File: http://projects.archlinux.org/svntogit/ … slinux.cfg
The Syslinux package in testing includes the above configuration file.
Cheers,
pyther

As Thomas puts it:
Thomas wrote:Syslinux is way more flexible and extensible than grub or lilo, actively developped (by someone who knows what he is doing and is always willing to fix bugs like yours) and feature-rich.
http://mailman.archlinux.org/pipermail/ … 17368.html
In regards to bootloaders in core
Pierre wrote:
ATM. we have grub1 in core/base and install that by default. The problem is that this project is virtually dead for a long time now and also not available on x86_64. Technically it has to be in the multilib repo.
Grub2 is currently in extra. Upstream development is still in flux. Imho its quite heavy and complex. An alternative successor would be extlinux from the syslinux package. It's very simple, easy to configure, actively maintained and reliable. Sure, it only supports booting from ext* and btrfs afaik but to be honest, if you use any other FS you should have a separate /boot even when using grub.
http://mailman.archlinux.org/pipermail/ … 18445.html
Why I like it:
* It is simple and easy to understand (see https://wiki.archlinux.org/index.php/Sy … t_Process)
* The devs are willing to help you out (they have helped me understand the Syslinux boot process and write this script)
* It is modular in nature and the Hardware Detection Tool (HDT) com32 module is cool
* Configuration is simple
* KISS (IMHO)
* GPT Support
Disadvantages:
* Can't boot from LVM volumes
* only ext2/3/4, btrfs, vfat file systems supported
Last edited by pyther (2011-01-16 21:56:41)

Report Script Help Needed - Data Extract

Hi,
I have a cube with 11 dims: Account, Period, Resource, Facility, SSSS, CCCC, Activity, Years, Version, Scenario, Charges
I need a report script that will extract data for a certain year and scenario only. I have not written a report script in a long time and have the following thus far. However it's not extracting data that I know exists. Can anyone help? Thanks is advance. This runs but I just get a blank screen or file....
//ESS_LOCALE English_UnitedStates.Latin1@Binary
// This report script extracts data from cube
"FY11"
{DECIMAL 4}
{NAMEWIDTH 25}
{SUPCOMMAS}
{SUPBRACKETS}
{SUPPAGEHEADING}
{NOINDENTGEN}
{SUPMISSINGROWS}
{SUPZEROROWS}
{TABDELIMIT}
{SUPFEED}
{ROWREPEAT}
"JAN"
"FEB"
"MAR"
//"APR"
//"MAY"
//"JUN"
//"JUL"
//"AUG"
//"SEP"
//"OCT"
//"NOV"
//"DEC"
"BUDGET"
// This is the members of the CCCC dimension to extract
// This is the members or the ACCOUNT dimension to extract
!

Hello -
You can try/modify the code below and see if this works -
//ESS_LOCALE English_UnitedStates.Latin1@Binary
{ SUPMISSINGROWS }
{ SUPZEROROWS }
{ SUPFEED, SUPBRACKETS, SUPCOMMAS }
{ NOINDENTGEN }
{ DECIMAL 4}
{ NAMEWIDTH 30 }
{ ROWREPEAT }
{ TABDELIMIT }
{MISSINGTEXT "-" }
<PAGE ("Scenario", "Resource", "Facility" ,"SSSS", "Activity", "Version", "Charges")
"Budget"
"Resource"
"Facility"
"SSSS"
"Activity"
"Version"
"Charges"
<COLUMN ("Year","Period")
"FY11"
"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
<ROW ("Account", "CCCC")
<LINK (<DESCENDANTS ("ACCOUNT") AND <LEV("ACCOUNT",0))
<LINK (<DESCENDANTS ("RT9_CCCC") AND <LEV("CCCC",0))
Here you may want to change teh combination in the Page dimensions for eg -
I know for Scenario you want Budget
But for Version should it be "Version" or may be "Working" Or "Final" or any other version dimension member ...?
Same way modify the dimension memebres for other dimensions.
Regards
Edited by: Rosi on Aug 24, 2009 10:01 AM
Edited by: Rosi on Aug 24, 2009 10:02 AM

TCL script help needed on Nexus7000 !

Does anyone know how to create a TCL script on Nexus7000 switch for following scenario ? Need urgent help here.. :-
Here is what I am trying to do :-
1. Whenever following log on "show log log" prints out :-
testnexus7000 %PIXM-2-PIXM_SYSLOG_MESSAGE_TYPE_CRIT:
2. Print out the output of show system internal pixm errors
And look for following line :-
[102] pixm_send_msg_mcast(1208): MTS Send to LC X failed >> where X is 0 based
and this error can occur multiple times for different LCs too.
4. Reload line card (s) X and syslog " task done"
Regards
Vijaya

Hi,
Vijaya I found same post on support cisco forums So people helped someone in same question !!!!!!
Please read it ....
https://supportforums.cisco.com/thread/2128886
Yes plus if u can help me in ......Cisco ASA same security problem than that will be good for me .....I will contact u and will be great help for me if u help
Hope that link help u .....
Bye,

Scripting Assistance Needed

I'm working on a form. What I need it to do is this:
The end user will check a box to add comments. The comments field is NOT visable until the check box is checked. Once the checkbox is checked then a text box will appear directly underneath it.
Thank you in advance!
SRenae

do you mean where are the textbox and checkbox located on my form or in the hierarchy?
I have the checkbox and textbox in their own subform.
if
(Checkbox1.rawValue==1) Textfield1.presence="visible"
elseTextfield1.presence
="hidden"
Sorry that I'm being a pain! I'm not well-versed in scripting if that isn't obvious! ;-)

Scripting Help Needed

Hi,
I have a requirement in SAP E-Sourcing as follows to achieve the functionality of hiding/displaying a field based on another field value selection.
Based on my field value FIELDA, I need to display or hide FIELDB/FIELDC.
1. FIELDA -- Value List (ValueA, ValueB, ValueC)
2. FIELDB -- Text Field
3. FIELDC -- Text Field
So,my requirement is
if (FIELDA = "ValueA")
FIELDB = Hide
FIELDC = Display
else
FIELDB = Display
FIELDC = Hide
Kindly direct me how to achieve this functionality using "Script Definition"
Thanks,
Prabhu

Hi Prabhu,
To achieve your requirement, you cannot write a script, as there is no API for dynamic UI.
Your requirement is very much possible by Page Customization.
Create page customization if already not existing for the object where you want to do this.
In that add the field as below
Field ID : technical name of the field which needs to be hidden (FieldB)
Property : Hidden
Value: Yes
Dimension on parent : NO
Dimension Field: Conditional Field (FieldA)
Dimension Type : Value list Value (in ur case)
Dimension Value: ValueA
In this way you have to configure all possible combinations required.
Hope you get this.
Thanks,
Vaibhav Modi

UCCX Conferencing in third call? Scripting help needed

All,
I've got a customer requirement where they want to be able to place a call into the contact centre, give the contact centre the digits to dial and have the contact centre place the call on their behalf. I've got no trouble with that bit.
The next requirement is that the call placed is recorded, even if the calls in are not from cisco phones (i.e. mobiles). We have a redbox recorder that does the recording and in order for it to commence a recording session, it needs to see a setup message through CM to check that it's an extension that is to be recorded.
For example, I use an IP phone that IS being monitored to make a call. The Redbox sees the setup and will record the call flow.
I use an IP phone that is NOT being monitored to make a call. The Redbox sees the setup and will not record the call.
In order to get calls recorded from the contact centre, I'm thinking of conferencing in a third phone that Redbox is set to record and have it auto answer on silent, but I can't figure out how to get the three calls conferenced together to keep the call flow recorded.
Any thoughts on how to achieve this? Or has anyone else out there used another method?
All help greatly appreciated!
LH
#15331

There is no mechanism within CCX that allows you to initiate a conference or join two contacts together. Your only options will be to transfer the triggerin
g contact to another destination with a Call Redirect or Call Consult Transfer. If you create a second contact and use a Place Call step, you can interact with both contacts in the script but never join them together.

IDCS5 to PS script - I need your help...

Hi there
I have been given a script by someone in the ID forum (who is happy that I ask you gurus here for some help with it) - you can download it here (I hope) https://www.yousendit.com/download/ZGJlRm96MGNCSWMwTVE9PQ.
Basically what it does at the moment is takes an ID doc, pop it through a PDF setting and make it come out in PS with every layer group as a separate layer, maintaining transparency.
This is almost perfect for my needs. Almost.
I wondered if there was a way to make it work better for IDCS5 (it was scripted for IDCS3). In IDCS5 every object is listed as a layer (much like PS and AI).
It would be amazing if the script could create a PS doc that would have every layer from ID replicated, and the layer groups created just as they are in ID also.
For example, if I am building a website, I may have 3 layer groups - "Navigation" "Copy" and "Images" - within each would be multiple elements. If I could run the script and end up with the same layer groups and their internal layers it would be incredible.
Thanks for any help.
Kind regards
Tom

Can nobody help?
Pretty please??

Report Script Help Needed

Hi,
I have not written one in years and am having trouble with a fairly simple one (I think). Was wondering if you could take a look. Anyways we have 11 dimensions which may make this impossible due to performance. I basically need a report script to perform a data extract. Data requirements for each dimension would be:
Scenario: Budget
Version: Final
CCCC: Tot_CCCC (Rollup)
SCCC: Tot_SCCC (Rollup)
Charge_Type: Charge_Type_Total (Rollup)
Resource: NU_RESC (Rollup)
SAU_CAU_Facility: Zero level members of "NU_Consolidated"
Account: Zero level members of "TOTCO_FERC"
Activity: Zero level members of "NU_Actv"
Years: Children of "YEARS"
Periods: Jan to Dec only
Report format would suppress the PAGE thus Budget and Final would not appear.
Was also hoping to somehow suppress CCCC, SCCC, Charge_Type and Resource(Not sure if possible).
Thus format would look something like this tab delimited:
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
SAU_CAU_Facility Account Activity Year 100 200 100 100 010 100 200 300 100 100 100 100
Here is what I have so far. I have not been able to get it to return any results even though I have loaded one row of fake data. Does anything jump out at you as to what I'm doing wrong? Appreciate any help you may have as I'm really stuck as it's been years since I have tried this.
//ESS_LOCALE English_UnitedStates.Latin1@Binary
// This report script extracts data from NUMaster
<SUPSHARE
{DECIMAL 4}
{NAMEWIDTH 25}
{SUPCOMMAS}
{SUPBRACKETS}
{SUPPAGEHEADING}
{NOINDENTGEN}
{SUPMISSINGROWS}
{SUPZEROROWS}
{TABDELIMIT}
{SUPFEED}
{ROWREPEAT}
<PAGE ("SCENARIO", "VERSION")
"BUDGET" "FINAL"
<COLUMN ("PERIOD")
"JAN"
"FEB"
"MAR"
"APR"
"MAY"
"JUN"
"JUL"
"AUG"
"SEP"
"OCT"
"NOV"
"DEC"
<ROW ("RESOURCE_LOCATION", "SCCC", "CCCC", "VERSION", "CHARGE_TYPE", "SCENARIO", "SAU_CAU_FACILITY", "ACCOUNT", "ACTIVITY", "YEARS")
<DIMBOTTOM "SAU_CAU_Facility"
<DIMBOTTOM "ACCOUNT"
<DIMBOTTOM "ACTIVITY"
<DIMBOTTOM "YEARS"
"TOT_CCCC"
"TOT_SCCC"
"CHARGE_TYPE_TOTAL"
"NU_RESC"
// Limits the members within the specified dimensions to the correct zero level members of the specified rollup
<LINK (<DESCENDANTS ("NU_CONSOLIDATED") AND <LEV("SAU_CAU_Facility",0))
<LINK (<DESCENDANTS ("TOTCO_FERC") AND <LEV("ACCOUNT",0))
<LINK (<DESCENDANTS ("NU_Actv") AND <LEV("ACTIVITY",0))
Thanks,
SAm

One thing that may help - it looks like you're using both <DIMBOTTOM and <LINK for three of your dimensions.
<DIMBOTTOM "SAU_CAU_Facility"
<DIMBOTTOM "ACCOUNT"
<DIMBOTTOM "ACTIVITY"
You should just need the <LINK and not the <DIMBOTTOM. <DIMBOTTOM's can really kill report script performance.
Whenever I do these, I try to start small, and then open the report script up to more and more members to see what's affecting performance. I'd start with one year, one facility, one activity, one account, etc. Then slowly add in the full member specifications you want.
Hope this helps,
- Jake

ISQL*Plus Load Script component needed..

Hi all,
Like to find out if anyone knows how to implement a text file loading mechanism from a jsp. It is similar to the iSQL*Plus script loading function:
1) User connects to the server from client terminal.
2) Browse for text file in client terminal.
3) Load content of text file into a textarea on a jsp.
What technology can be used? Java bean? Servlet? Any guide, advise or sample code would be appreciated.
Thank you!

Have you had a look at Application Express? The SQL Worksheet component sounds like what you're looking for. It can't run SQL*Plus scripts, but it can execute single SQL and PL/SQL statements. It can load/save 'scripts' to the database too. It might be even better for your needs. Web based, free ...
http://otn.oracle.com/apex
You gave me a laugh there with the spellchecker bit. A good Sheffield sense of humour. Nice one.
Alison

Calling the DTExec from Perl Script and need to get the Return Value (Sucess or Failure)

I am able to execute the SSIS Package from Perl Script using DTExec. But i need to get the return code of the SSIS Execution. Is their any option available to get the Success or Failure information from Perl ?

Exit codes returned from dtexec utility
When a package runs, dtexec can return an exit code. The exit code is used to populate the ERRORLEVEL variable, the value of which can then be tested in conditional statements or branching logic within a batch file. The following table lists
the values that the dtexec utility can set when exiting.
http://technet.microsoft.com/en-us/library/hh231187.aspx
There's a wrinkle if the package is running in the SSIS Catalog:
http://www.mattmasson.com/2012/02/exit-codes-dtexec-and-ssis-catalog/
David
David http://blogs.msdn.com/b/dbrowne/

SAPGUI Scripting Developer needed

I need someone capable of doing some VB coding for me related to SAPGUI scripting.....I need tight login scripts covering every scenario (user already logged on, max # of sessions, single-signon, etc.) and I need help with the systemfocus statements and understanding how it actually works (see my other post).
I am developing a commercial program and need it to behave as such, and unfortunately my scripting skills and programming skills in general are lacking.
Thanks,
Mike

Standard Excel VBA uses UCASE to convert text to upper case.

A script is needed

Similar Messages

Maybe you are looking for