A script to display all rows on printer friendly mode

Hello,
I use IR with a navigation bar entry to open the printer friendly mode.
Now I can hide the regions I want and I have modified the template, it works fine.
But I would like to consistently display all rows in the IR (in this mode). How could I do that ? Maybe can I add a script in the template header but I don't know what exactly...
Maybe something like gReport.search('SEARCH', this."100000"); ?
Anyone'd have an idea ?
Thanks for your help.
Fanny

Ok, I think I have found a sort of issue :
-> On page 0 (so it works on all pages) I created a dynamic action that display all rows on the IR :
Event : Before page submit
Settings : Execute Javascript Code = Search ();
Affected elements : IR region
Type condition : Printer Friendly Mode
... + function 'Search' located in the template header :
function Search ()
gReport.reset();
$('#apexir_SEARCH').val($x('100000').value);
gReport.search('SEARCH');
};-> On each page properties I added (javascript when page loads) (if the user refresches the page on the standard mode) :
gReport.search('SEARCH');So when the user open the printer mode, all rows display, when he returns to application , the IR hasn't moved.
If he refreshes the page, all rows display too (the value is set to 100000 rows) but the gReport.search('SEARCH'); take, in a second time, the search bar value, that hasn't changed.
And that's it !

Similar Messages

Display all rows (starting at row 1)

Hi there
How can I create code (with or without the wizard) in Web Application Designer, that will force the table (analysis web item) to display all rows starting at row 1.
The user is initially presented with a table which is, say, limited to 5 lines at a time. Default scrolling / paging functionality is added, which allows them to page down 5 rows at a time.
I want to be able to provide a button which displays all the rows ... normally this would be done by setting BLOCK_ROW_SIZE to 0 if I am correct.
However, what I have found is that simply setting this parameter, displays all the rows, but from the existing row, so if the user had paged down once already, they are shown rows 6 till the end.
I have played with various combinations of DATA_ROW_FROM, DATA_ROW_TO and BLOCK_ROW_SIZE, and none of those combinations seem to work for me.
I would have thought setting the FROM row to 1, the TO row to 0 and the BLOCK size to 0 would do the trick, but that simply shows all the rows from the current position ... again, I want to go back to the first line and then show all.
Putting 2 commands in the button doesn't seem to work either, as the 2nd command seems to override the 1st command.
Any ideas?
Cheers,
Andrew

Come on ... someone must have had to do something like this ...

Page Header and Footer in Printer Friendly mode

Hi,
I have a report which has more than 500 rows and I want to print them.
The printer friendly mode works fine, but is it possible that there is a page "header" and "footer" on every page which is printed?
For example, that the column headings are on every page which was printed?
Or that at the bottom of each page is the page number displayed?
Does anyone have an idea?
Thanks,
Tim

IE and Firefox are designed for WEB pages.
WEB pages are on Internet. Security is important and browser should not compromise user to use it.
Many users=Many printers!
If you want to write app for especially one printer and know users (Intranet application) then here is what you can do:
1) Use IE
2) write your own ocx with interface for your needs.
3) every user should implement this ocx in their browser.
4) When they accept your ocx, then in this "small app" you could do as much as this user can do on their own windows. So setting printer, orientation and size is a peace of cake.
5) make your report regarding this printer
And this is it!
And few other things...
If user choose larger font then your HTML is broken!!!
For that I think that PL/PDF or Mail merge is better solution!

LOVs in Print Friendly Mode

Hi,
I have a page item of type Display as Text (based on LOV, saves state). The page shows the display value ("Pending" in this case). However, when I launch the page in Print Friendly mode, it shows the return value ("2"), instead of the display value ("Pending").
This also occurs for any other select lists on my pages if the select list is read only.
Any ideas or workarounds?
Thanks,
Chaunaci

yes, this does appear to happen for items of type "Display as Text(based on LOV, saves state)", but things seem to work fine for my select list items in the production version of htmldb. i'll log the issue in a bit, but two ways to work around it for now would be to:
1) add an extra item to your page that would render correctly in printer friendly mode. use our built-in condition types of "Current Page Is in Printer Friendly Mode" and "Current page is NOT in Printer Friendly Mode" to determine which/when of your two items should be displayed.
2) tweak your LOV query a little bit to pay attention to the api variable, htmldb_application.g_printer_friendly. it's a boolean that returns true if your app is in printer friendly mode.
if you really are seeing this behavior with select list items, could you please provide more specifics as to how those items were set up?
thanks,
raj
[Edited by: rmattama on Apr 1, 2004 1:26 PM]
i now see the issue w/the select lists occurs in read-only mode. gotcha. didn't read that right the first time. i'll add this to the bug rpt.

How to display all rows in the report in one page in Oracle APEX 3.2

Friends -
We are using Oracle Applications Express 3.2 on oracle database 10.2.0.5 on solaris environment.
One of our report contains total no of rows 50000. when we ran report by default it is showing 15 and i can go search and change display no of rows to different numbers and click go.
My question is it possible to display all 50000 rows during first time report launching without going to change rows. Is there any option that we can set how many number of rows that we can display during report design.
Please advise
VSH

Hello VSH,
>> My question is it possible to display all 50000 rows during first time report launching without going to change rows
As vee pointed out it is possible, however the question you need to ask yourself is is it wise?
Bear in mind that displaying 50,000 rows on a single HTML page means a lot of code that must be loaded by the client browser all at once. What it will do to your page loading time? Browser memory? Network bandwidth? Also, do you really believe that it is effective to let an end user look for a specific row among 50,000 rows?
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Displaying all rows if value is blank

Hi all trying I am trying to display all the rows from a
database if the default value is blank
I have tried to put a * or ? in the php code What could be
wrong here?
What do I need to put for the variable section for the
correct syntax
As it its
Name = p
Type = numeric
Default value = -1
Run-Time value $_Get[‘p’]
Cat = is the Variable to select the rows if a value is
present
$p_Recordset_B = "-1";
if (isset($_GET['p'])) {
$p_Recordset_B = (get_magic_quotes_gpc()) ? $_GET['p'] :
addslashes($_GET['p']);
SELECT Company FROM Table WHERE Cat = %s <> 'NULL'
ORDER BY RAND() LIMIT 70

I am also having this problem, except I have a search form with a list that contains 3 options "Select Country", "Canada", and "U.S." and if a user leaves the field as "Select Country" I want the results page to show the records for both Canada and US, is there a value that can be entered into the Default Value field?
All help is appreciated.

Trouble displaying all rows in classic report

Hi,
I have a classic report which pulls out data based on item in bind variable (which is a select list). Some entries should have about 200 rows but the page only shows 15 rows.
I have tried setting pagination to none still dont get to see all rows. Here is my setup for pagination for the table: http://i.imgur.com/iQoG0.png
If I get my pagination back, then I get to see all rows by clicking next but I need to show all rows in the page. Is there anything else I need to be doing aside from setting pagination to none?
Apex 4.1.1
Cheers

Hi,
>
I have a classic report which pulls out data based on item in bind variable (which is a select list). Some entries should have about 200 rows but the page only shows 15 rows.
I have tried setting pagination to none still dont get to see all rows. Here is my setup for pagination for the table: http://i.imgur.com/iQoG0.png
>
The Number of Rows item determines the number of rows on page. You have set it to 999, so that looks ok.
>
If I get my pagination back, then I get to see all rows by clicking next but I need to show all rows in the page. Is there anything else I need to be doing aside from setting pagination to none?
>
Add a Reset Pagination Process at Processing point "Before Regions" (or anywhere before that) and you will be ok.
The browser cache does not clear the pagination on its own at times.
Cheers,

Export in excel without displaying all rows

Hello,
I use OBIEE version 10.1.3.4.1.
I have a report in "table view" with thousands of rows.
I would like to export a report to Excel, without displaying the data. Is possible to set the execution as an export in Excel?
Alternatively I enabled the "Page Control" by 50 "row per page." Is possible to export to excel all the row of the report without to see them all?
Thanks
Sara
Edited by: Sara C. on 25-gen-2010 6.23

Hi Sara,
you have 2 options:
1. use ibots to deliver your report in the form of an excel. This would avoid the generation of report.
2. Use "download to excel" option. This option downloads the entire content and NOT the ones displayed on the screen.
Hope this helps.
cheers,
Vineeth

Display all rows in the report

Hi all,
I've a report which requires all the rows to be displayed even if no data is present.
For e.g. I've agebucket classification in my rows. Certain agebucket classification has no ppl in it.so i want it to be displayed with 0 as its value. could anyone please help?
Thanks in advance.

Hi,
If you have taken agebuckets as selections , then you will get balnk cells if there are no records satisfies the restrictions given in those selections. So to get zero in place of Blank value , you need to dependent on Formulas as shown below:
Lets say you have selections like agebucket1,agebucket2.
Then you need 2 formulas .And you need to hide agebucket1,agebucket2.
1st formula:
( agebucket1 == 0 ) * 0 + ( agebucket1 <> 0 ) * agebucket1
2nd formula:
( agebucket2 == 0 ) * 0 + ( agebucket2 <> 0 ) * agebucket2
With rgds,
Anil Kumar Sharma .P

REUSE_ALV_GRID_DISPLAY Not Displaying All Rows

Hi,
I am using the FM " REUSE_ALV_GRID_DISPLAY " to display the content of an itab. Before calling the FM, the itab contains 10,170 rows, but the FM is displaying 10,047 rows. This is happening only when number of rows exceed 10,000.
In goggle, I have read that there are no conditions on number of rows in ALV. Then why the FM is bahaving like this please?
Cheers

Dear Aftab,
I tried to display some 10500 using REUSE_ALV_GRID_DISPLAY and I am able to get all the rows.
So I dont think there is any restriction for number of rows. Can you able to share your code?
Regards
Davis

Text area not displaying all rows

I have a SQL query as the source for a text field that returns several rows. However, the text area (display as text (do not save state)) only displays the data from the first row in the query. How do I get the rest as well?

SQL as source assumes you will return exactly one value. If you return more, it only takes the first. Instead, use a function body and return a concatenation of what you want:
declare
l_retval varchar2(32767);
cursor c1 is select v1 from t ...
begin
for c1rec in c1 loop
l_retval := l_retval || chr(10) || chr(13) || c1rec.v1;
end loop;
return l_retval;
end;

To display all rows and columns in proper alignment

My Question is when I want to display multiple recoreds the rows are splits many time and displaying recoreds are combersome to understand, so please give me the solution about this problem.
when this query is executed, single row comes in multiple rows after this question below some line of displays rows are shown.
Thanks!
SELECT
 E.Empno EmpNo,
 E.Ename EmpName,
 E.Job EmpJob,
 E.HireDate EmpHireDate,
 E.Deptno Empdeptno,
 NVL((TO_CHAR( E.Comm )),'No Comm') EmpComm,
 E.Sal EmpSal,
 E.Sal+NVL(E.Comm,0) EmpTotalSal,
 (TO_CHAR(SYSDATE,'YYYY')-TO_CHAR(E.HireDate,'YYYY')) EmpExpInYear,
 E.deptno EmpDeptno,
 ED.Dname EmpDname,
 ED.Loc EmpDeptLoc,
 ES.Grade EmpSalGrade,
 NVL((TO_CHAR(M.Empno)),'supereme') Mgrno,
 NVL((TO_CHAR(M.Ename)),'s auth') MgrName,
 NVL((TO_CHAR(M.HireDate)),'Not Assign') MgrHireDate,
 NVL((TO_CHAR(M.Sal)),'NOt assign') MgrSal,
 NVL((TO_CHAR(M.Comm)),'Not applicable') MgrComm,
 NVL((TO_CHAR(M.Sal+NVL(M.Comm,0))),'Not Assign') MgrTotalSal,
 NVL((TO_CHAR( E.HireDate - M.HireDate)),'Mgr Not Assign') Seniorindays,
 NVL((TO_CHAR((TO_CHAR(SYSDate,'YYYY')-TO_CHAR(M.HireDate,'YYYY'))- (TO_CHAR(SYSDATE,'YYYY')-TO_CHAR(E.HireDate,'YYYY')))),'No mgr Assign') MgrSeniority ,
 NVL((TO_CHAR(TO_CHAR(SYSDATE,'YYYY')-TO_CHAR(M.HireDate,'YYYY'))),'No Mgr Available') MgrExpInYear,
 NVL((TO_CHAR(E.Sal-M.sal)),'Not Assign') EmpAndMgrSalDiff,
 NVL((TO_CHAR(M.Deptno)),'not assign') Mgrdeptno,
 NVL((TO_CHAR(MD.Dname)),'sup does not have mgr') MgrDeptName,
 NVL((TO_CHAR(MD.Loc)),'Sup does not have mgr') MgrDeptLoc,
 NVL((TO_CHAR(MS.Grade)),'Sup does not have mgr') MgrSalGrade
 FROM
 Emp E, Emp M, Dept ED, Dept MD, SalGrade MS, SalGrade ES
 WHERE M.Empno(+) = E.Mgr AND E.Deptno = ED.Deptno(+) AND
 M.Deptno = MD.Deptno(+) AND
 M.Sal BETWEEN MS.Losal(+) AND MS.HiSal(+) AND
 E.Sal BETWEEN ES.Losal(+) AND ES.HiSal(+)
EMPNO EMPNAME EMPJOB EMPHIREDA EMPDEPTNO EMPCOMM EMPSAL EMPTOTALSAL EMPEXPINYEAR EMPDEPTNO EMPDNAME EMPDEPTLOC EMPSALGRADE
MGRNO MGRNAME MGRHIREDAT MGRSAL MGRCOMM MGRTOTALSAL
MGRSENIORITY MGREXPINYEAR EMPANDMGRSALDIFF MGRDEPTNO MGRDEPTNAME
MGRDEPTLOC MGRSALGRADE
7839 KING PRESIDENT 17-NOV-81 10 No Comm 5000 5000 28 10 ACCOUNTING NEW YORK 5
supereme s auth Not Assign NOt assign Not applicable Not Assign
No mgr Assign No Mgr Available Not Assign not assign sup does not have mgr
Sup does not have mgr Sup does not have mgr
EMPNO EMPNAME EMPJOB EMPHIREDA EMPDEPTNO EMPCOMM EMPSAL EMPTOTALSAL EMPEXPINYEAR EMPDEPTNO EMPDNAME EMPDEPTLOC EMPSALGRADE
MGRNO MGRNAME MGRHIREDAT MGRSAL MGRCOMM MGRTOTALSAL
MGRSENIORITY MGREXPINYEAR EMPANDMGRSALDIFF MGRDEPTNO MGRDEPTNAME
MGRDEPTLOC MGRSALGRADE
7788 SCOTT ANALYST 19-APR-87 20 No Comm 3000 3000 22 20 RESEARCH DALLAS 4
7566 JONES 02-APR-81 2975 Not applicable 2975
6 28 25 20 RESEARCH
DALLAS 4
Edited by: user12252618 on 9 Dec, 2009 11:07 AM

user12252618 wrote:
My Question is when I want to display multiple recoreds the rows are splits many time and displaying recoreds are combersome to understand, so please give me the solution about this problem.
when this query is executed, single row comes in multiple rows after this question below some line of displays rows are shown.
Thanks!
<snip>
This is a simple line wrap problem. Are you doing this in sqlplus? if so
set linesize 256
set trimspool onAnd while you are looking up those commands in the SQLPlus Reference (you will look the up to study the details, right?) you might take a look at some of the other sqlplus formatting commands as well.
Edited by: EdStevens on Dec 9, 2009 1:25 PM

Display all rows in Group Sort

Hi there,
I am using Disco 10g
I got a report which is grouped on 3 fields.
the problem I am facing is that we need to repeat the data value on each row and still need the report to be grouped on these values.
For Example:
Currently, output on the report is grouped by Customer Name, Transaction Type, Transaction Currency and displayed in the below format: [Format 1]
ABC************CREDIT************GBP************20000
***************************************EUR************10000
*****************INVOICE***********GBP************30000
**************************************USD************15000
What we would like the report to display is: [Format 2]
ABC************CREDIT************GBP************20000
ABC************CREDIT************EUR************10000
ABC************INVOICE************GBP************30000
ABC************INVOICE************USD************15000
[Replace * with a space]
if this is not possible than is it possible in any way to export the report in Format 2 to Excel/pdf.
would really any help appreciated in this matter
Best Regards,
Manish

hi there,
What a coincidence - seriously not joking.
I created a calculation to display -ve values in round brackets'()' rather then '<>' provided as standard functionality. Then, I thought whether I could use the same concept for group by columns as well or not and guess it worked and I was ecstatic.
Even though the original problem related to display of -ve values is still pending - any ideas.
Must say one thing that you are a super star as nobody thought of this before including myself [till today in the morning]
I really appreciate you making an effort in answering this query anyway.
By any chance you guys know how to change a -ve value display from '<>' to '()'. I will try to explain what the users want and what I did:
What the users want:
-ve Amounts are displayed with a default standard option in the following format <12,2345.20> and we need to display the same amount in the following format (12,2345.20)
What I did:
Created a calculation and display the output as a concatenated string. As result I lost the thousand separator 0,000 and also lost any 0's displayed after the decimal - which is not agreeable to the user.
I there any way to get around this problem.
Best Regards,
Manish

Query structure with does not display all rows in VC

Hello Gurus,
I am trying to build a query based VC application.
I have a Row structure and Column structure in the query, but when I drag the query into ivew, I only see name of the structure but not the rows in the structure. At the same time when I deploy it is showing me all the rows in the result. I also did "Define/test query" and pressed the "Generate" button, but It is showing me only Colum struture rows but not Row strucure rows.
Any help in this issues is very much appreciated.
Thanks in advance
ganesh

Hi Mario,
To overcome this limitation is possible to substitute the VC Table with WAD Table and keep the functionality of send events (like open a pop-up after user click)?
Best Regards,
Marcos

Report output displaying all rows in a single line

Sometimes
Edited by: 845142 on Mar 17, 2011 11:12 AM

Hi,
There might be some mistake in your layout. the print direction should be down.
Look at the below link for more information:
http://oracleapps4u.blogspot.com/2011/03/layout-mode-print-direction.html
Some guide lines in developing the report layout:
http://oracleapps4u.blogspot.com/2011/03/layout-guidelines-to-increase-report.html
If this didnt help you. detail more about your problem

A script to display all rows on printer friendly mode

Similar Messages

Maybe you are looking for