Display all rows in the report

Hi all,
I've a report which requires all the rows to be displayed even if no data is present.
For e.g. I've agebucket classification in my rows. Certain agebucket classification has no ppl in it.so i want it to be displayed with 0 as its value. could anyone please help?
Thanks in advance.

Hi,
If you have taken agebuckets as selections , then you will get balnk cells if there are no records satisfies the restrictions given in those selections. So to get zero in place of Blank value , you need to dependent on Formulas as shown below:
Lets say you have selections like agebucket1,agebucket2.
Then you need 2 formulas .And you need to hide agebucket1,agebucket2.
1st formula:
( agebucket1 == 0 ) * 0 + ( agebucket1 <> 0 ) * agebucket1
2nd formula:
( agebucket2 == 0 ) * 0 + ( agebucket2 <> 0 ) * agebucket2
With rgds,
Anil Kumar Sharma .P

Similar Messages

How to display all rows in the report in one page in Oracle APEX 3.2

Friends -
We are using Oracle Applications Express 3.2 on oracle database 10.2.0.5 on solaris environment.
One of our report contains total no of rows 50000. when we ran report by default it is showing 15 and i can go search and change display no of rows to different numbers and click go.
My question is it possible to display all 50000 rows during first time report launching without going to change rows. Is there any option that we can set how many number of rows that we can display during report design.
Please advise
VSH

Hello VSH,
>> My question is it possible to display all 50000 rows during first time report launching without going to change rows
As vee pointed out it is possible, however the question you need to ask yourself is is it wise?
Bear in mind that displaying 50,000 rows on a single HTML page means a lot of code that must be loaded by the client browser all at once. What it will do to your page loading time? Browser memory? Network bandwidth? Also, do you really believe that it is effective to let an end user look for a specific row among 50,000 rows?
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Trouble displaying all rows in classic report

Hi,
I have a classic report which pulls out data based on item in bind variable (which is a select list). Some entries should have about 200 rows but the page only shows 15 rows.
I have tried setting pagination to none still dont get to see all rows. Here is my setup for pagination for the table: http://i.imgur.com/iQoG0.png
If I get my pagination back, then I get to see all rows by clicking next but I need to show all rows in the page. Is there anything else I need to be doing aside from setting pagination to none?
Apex 4.1.1
Cheers

Hi,
>
I have a classic report which pulls out data based on item in bind variable (which is a select list). Some entries should have about 200 rows but the page only shows 15 rows.
I have tried setting pagination to none still dont get to see all rows. Here is my setup for pagination for the table: http://i.imgur.com/iQoG0.png
>
The Number of Rows item determines the number of rows on page. You have set it to 999, so that looks ok.
>
If I get my pagination back, then I get to see all rows by clicking next but I need to show all rows in the page. Is there anything else I need to be doing aside from setting pagination to none?
>
Add a Reset Pagination Process at Processing point "Before Regions" (or anywhere before that) and you will be ok.
The browser cache does not clear the pagination on its own at times.
Cheers,

Export for all rows of a Report Region

Hi,
I have a html region with a query button to restrict which rows get selected in a reports region below it.
But I also want to have a link to export all rows in the report to a csv file. Button the report region may already
have selected data in it that is not necessarily all rows in the report. Thus I guess I am wondering if I should
create a whole separate hidden report region that will always select all rows in the query to relate the
export link to? Or if I can someone use the current report region and select all rows for the export but
not requery or change the currently displayed report regions results?
Thanks in advance!

Yes I just created a hidden report i.e. one with all columns set to
APEX_APPLICATION.G_EXCEL_FORMAT = TRUE
And then just create a javascript function to call the export routine...

A script to display all rows on printer friendly mode

Hello,
I use IR with a navigation bar entry to open the printer friendly mode.
Now I can hide the regions I want and I have modified the template, it works fine.
But I would like to consistently display all rows in the IR (in this mode). How could I do that ? Maybe can I add a script in the template header but I don't know what exactly...
Maybe something like gReport.search('SEARCH', this."100000"); ?
Anyone'd have an idea ?
Thanks for your help.
Fanny

Ok, I think I have found a sort of issue :
-> On page 0 (so it works on all pages) I created a dynamic action that display all rows on the IR :
Event : Before page submit
Settings : Execute Javascript Code = Search ();
Affected elements : IR region
Type condition : Printer Friendly Mode
... + function 'Search' located in the template header :
function Search ()
gReport.reset();
$('#apexir_SEARCH').val($x('100000').value);
gReport.search('SEARCH');
};-> On each page properties I added (javascript when page loads) (if the user refresches the page on the standard mode) :
gReport.search('SEARCH');So when the user open the printer mode, all rows display, when he returns to application , the IR hasn't moved.
If he refreshes the page, all rows display too (the value is set to 100000 rows) but the gReport.search('SEARCH'); take, in a second time, the search bar value, that hasn't changed.
And that's it !

Display the total number of rows for the report in OBIEE 11g

Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
Records 1-25. Total of Records : 120
Is there any way we can display the total number of rows for the report.
Kindly help me.. Its very urgent requirement.
MAny Thank in advacne

Check this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
and
http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
You have to go something like as suggested in previous link.
Mark as correct/helpful

Previous record values displaying in the Group Footer row in the report.

Hi Friends,
I have 3 tables
TableA:(PERNR BEGDA ENDDA are key fields)
PERNR BEGDA    ENDDA      WERKS
10001 1/1/2010 12/31/9999 1001
TableB:(PERNR BEGDA ENDDA SUBTY are key fields)
PERNR BEGDA    ENDDA       SUBTY TYPES
10001 1/1/2010 12/31/9999   01          COMS1
10001 1/1/2010 12/31/9999   02         COMS2
TableC:(PERNR BEGDA ENDDA are key fields)
PERNR BEGDA ENDDA        AMNT
10001 2/2/1997 4/3/2010      1000
10001 4/4/2010 12/31/9999 2000
I have joined these table by the key 'PERNR'( like A->B and A->C)
Groped by the same key 'PERNR'
My result rows in the report:
PERNR BEGDA    ENDDA      WERKS SUBTY TYPES BEGDA    ENDDA      AMNT
10001 1/1/2010 12/31/9999 1001       01         COMS1 2/2/1997 4/3/2010    1000
10001 1/1/2010 12/31/9999 1001       02         COMS2 2/2/1997 4/3/2010    1000
10001 1/1/2010 12/31/9999 1001       01         COMS1 4/4/2010 12/31/9999 2000
10001 1/1/2010 12/31/9999 1001       02         COMS2 4/4/2010 12/31/9999 2000
But in the report format is like this in the Group Footer row:
PERNR: 10001                     WERKS:1001
SUBTY: 02                          AMNT :2000 (Current date)
                                            AMNT :1000 (Previous record)
I created the format with "Previous" function
but in the report it is giving the '2000' instead of '1000' in the AMT field
Please help me, can i use the for loop in the report? or any sugessions?
Thanks in advance.
Regards,
Venkata

A group footer will dis[lay contents of the last record. You need to sort records to ensure that the last record contains link to your dynamic image.
Ian

Export in excel without displaying all rows

Hello,
I use OBIEE version 10.1.3.4.1.
I have a report in "table view" with thousands of rows.
I would like to export a report to Excel, without displaying the data. Is possible to set the execution as an export in Excel?
Alternatively I enabled the "Page Control" by 50 "row per page." Is possible to export to excel all the row of the report without to see them all?
Thanks
Sara
Edited by: Sara C. on 25-gen-2010 6.23

Hi Sara,
you have 2 options:
1. use ibots to deliver your report in the form of an excel. This would avoid the generation of report.
2. Use "download to excel" option. This option downloads the entire content and NOT the ones displayed on the screen.
Hope this helps.
cheers,
Vineeth

Hide the row on the report

Hi experts,
i am working on webi repots xir3 so that i had problem on the reports and then let me know how could i remove or hide rows on the reports
thanks & regards,
Murali

Hi,
When you create a WEbi Query it generates reort with all columns. Now if you don't want to see one of the columns you can remove it by dragging to left of by deleting it
May be you dont want to see when there is no data. If this is the case then you can select the report and then go to Properties tab and click the plus sign next to display and there you have control that if you want to see where there is data or not.
I think this is what you wanted if not then let us know.
Regards,
Bashir Awan

IR Aggregation as a first row in the report

Hi,
I am calculating aggregation using actions in the IR, but my requirement i have to display the aggregation result as a first row in the report.
version 4.1
thanks in advance.
regards
Chandran

Hi Jeff,
Thanks for your reply,
as you told i tried that CUBE and ROLL UP but i should display the grand total only not sub totals. and i should hi-light that total row also.
for above requirements i have selected the actions functionality.
regards
Chandran

How to display 30 rows in a report

Hi
I am using apex.oracle.com to Generate one report.
report contains 30 rows and tried alot to display all rows without clicking next.
how i can get this.
thanx in advance.
Chanran

Thanx for your reply mini,
i am showing some settings in report attributes
report template template:1.standard
pagination scheme -mo pagination selected-
enable partial page refresh yes
display point bottom right
number of rows 20
but this is not working same problem i am facing
regards
Chanran
Edited by: Chandu on 19-Oct-2011 06:37

Display all rows (starting at row 1)

Hi there
How can I create code (with or without the wizard) in Web Application Designer, that will force the table (analysis web item) to display all rows starting at row 1.
The user is initially presented with a table which is, say, limited to 5 lines at a time. Default scrolling / paging functionality is added, which allows them to page down 5 rows at a time.
I want to be able to provide a button which displays all the rows ... normally this would be done by setting BLOCK_ROW_SIZE to 0 if I am correct.
However, what I have found is that simply setting this parameter, displays all the rows, but from the existing row, so if the user had paged down once already, they are shown rows 6 till the end.
I have played with various combinations of DATA_ROW_FROM, DATA_ROW_TO and BLOCK_ROW_SIZE, and none of those combinations seem to work for me.
I would have thought setting the FROM row to 1, the TO row to 0 and the BLOCK size to 0 would do the trick, but that simply shows all the rows from the current position ... again, I want to go back to the first line and then show all.
Putting 2 commands in the button doesn't seem to work either, as the 2nd command seems to override the 1st command.
Any ideas?
Cheers,
Andrew

Come on ... someone must have had to do something like this ...

Eliminate duplicate rows in the report

i have a report generated as shown below:
col1----col2-----col3---col4---etc..
1-------a---------x------aa==>row1
2-------a---------y------bb==>row2
1-------a---------x------cc==>row3
if u see the above displayed data for row1 and row3. it has same set of data in
col1,col2,col3.
Now ,i need to eliminitate the rows in the report which has same set of data in
col1,col2,col3(avoid duplication of this set of data )
but i cant do it while querying as there are other columns also, which make the
the whole row distinct.
so i think ineed to do it after the query process or while querying.
It would be very helpful for me If somebody can help me to find a solution for
this problem.
thanks in advance

SELECT
detail_date ,
agent_code ,
detail_piece,
vessel ,
journey_reference ,
doc_price,
local_code,
AMOUNT,
sum(amount) over (partition by local_code) SUM_AMT
FROM
(SELECT
ag.detail_date ,
ag.agent_code ,
dt.detail_piece,
dt.vessel ,
dt.journey_reference ,
dt.doc_price,
dt.local_code,
decode(dt.doc_price,'FE',decode(gl.category,'00',gl.amt),
               'FI',decode(gl.category,'00',gl.amt),
          decode(gl.category,'CC',gl.amt)) AMOUNT
FROM as_group ag,
as_doc_price dt,
as_line gl
WHERE ag.pas_id = dt.pas_id
AND     dt.doc_id = gl.doc_id
AND ag.pas_id = :p_pass)
Hi Gayathri,
the aove one is my exact query.You 'll find a SUM_AMT column inthat which calculates the total of AMOUNT in the suquery and displays it partitioning by local_ code, so if u have there local codes it displays the total three times.
But i need to display it only once at the end of the report,i mean for each distinct local_code.
i also tried using the same subquery along with a WITH clause so that i use the same subquery and select the other data and the partion by data seperately(in which case i gave distinct clause in the seperate select statement consisting of partition by clause) and finally make a UNION of the two queries .
it is as shown below:
WITH tab1 as(SELECT
ag.detail_date ,
ag.agent_code ,
dt.detail_piece,
dt.vessel ,
dt.journey_reference ,
dt.doc_price,
dt.local_code,
decode(dt.doc_price,'FE',decode(gl.category,'00',gl.amt),
               'FI',decode(gl.category,'00',gl.amt),
          decode(gl.category,'CC',gl.amt)) AMOUNT
FROM as_group ag,
as_doc_price dt,
as_line gl
WHERE ag.pas_id = dt.pas_id
AND     dt.doc_id = gl.doc_id
AND ag.pas_id = :p_pass)
SELECT
detail_date ,
agent_code ,
detail_piece,
vessel ,
journey_reference ,
doc_price,
local_code,
AMOUNT
FROM tab1
UNION
SELECT
null,
null,
null,
null,
null,
null,
local_code,
sum(amount) over (partition by local_code) SUM_AMT
from tab1;
the above query with WITH clause, worked fine in SQL plus, but in reports the same query gave me error "table or view tab1 does not exist" .When i removed the UNION from the with cluase thequery is OK in report(i'm not sure about this strange behaviour in report like same query that works in SQL plus fine , showing errors in report.If the above query i'm able run in reports its done for me but wat to do its not workin fine
So this is the situation i'm in..i have given a detailed reply...please be generous to ask if u need more info from my side..
Expecting a positive response from your side
Regards
DEV

Want to update multiple rows of the report but getting a bug.

hi,
I am trying to update multiple rows of a report.For that I have created a teport with dynamic checkbox generated using ---HTMLDB_ITEM.CHECKBOX(1,utt.trouble_ticket_id) " "----.Checkboxes are rendered perfectly on the report.
but when I tried to update the selected rows of the report as given in the documentation
begin
:P16_priority:=htmldb_application.G_F01.count;
for i in 1..htmldb_application.G_F01.count
loop
update umanage_trouble_ticket set severity =:P16_priority where
trouble_ticket_id = htmldb_application.G_F01(i);
end loop;
end;
I found that all the rows are updated.not only selected rows.
and the count it gives =no of rows returned + no of rows selected.
Please help me regarding this.
thanx.
BHARAT

Hi Bernhard,
I think that u didnt get y problem.
When I take the value from "htmldb_application.g_f01(i)" then it should return id's of rows that are checked but when I do that it returns id's of all the rows.So I am not able to update only checked rows.
from id's of rows i mean value provided when generating checkboxes through query.
htmldb_item.checkbox(1,trouble_ticket_id) " "
I am approching to the solution as specified in the documentation. "Adding check boxes to each row in a report".
but still cant find any solution.
thanx that u showed some intrest in my problem.
If u can get the solution reply soon.
Regards
BHARAT

Adding new row to the reports list page

How can I add a new report row in the reports list of the reports tab.
Ex: a new row to the report "users by Date of Join report" is to be added
How can we add Please help me out in this

I am facing the same problem!
camickr wrote:
Try adding an empty row containing a null value for the String instead of the empty String.camickr, it will not help, the DefaultRowSorter in the "*+compare(int model1, int model2)+*" method return -1 if the first value is null and 1 if the sacond value is null. and incase of DESCENDING it mult by -1.
 // Treat nulls as < then non-null
 if (v1 == null) {
 if (v2 == null) {
 result = 0;
 } else {
 result = -1;
 } else if (v2 == null) {
 result = 1;
 } else {
 result = sortComparators[counter].compare(v1, v2);
 if (sortOrder == SortOrder.DESCENDING) {
 result *= -1;
 }And this is the real problem!
The empty line is sorted as the smallest value and incase of DESCENDING it will be the first line (because of the mult by -1).
We could have overide it and incase of the empty row(usualy the last row) do not mult by -1 in DESCENDING mode.
But the problem is that the "+*compare*+" method and it's caller "*+Row+*" inner class are private :-(
It is not wise to do it but we can do like kmp83 wrote:
kmp83 wrote:
copy/duplicate "private" code from DefaultRowSorter into my extended class.Anyone have another suggestion?

Display all rows in the report

Similar Messages

Maybe you are looking for