A way to find out tables and fields referred by a transaction

I want to know whether there is a way to find all the database tables and fields referred by a transaction. I know that we can do F1 on each field to get the reference table and the fielname but its taking a lot of time for me..I need to know if there is any program or a way(some tool) to find out the tables and fieldnames for a transaction. Any help would be greatly appreciated..
Thanks,
Mohsin.

Hi Mohsin,
As suggested SQL Trace is the best Option.
Say inorder to Find the field inf. you can use SQL trace (ST05) .
Steps for the same:
1) Go to ST05 --> Activate Trace.
2) Run the trasaction , make some changes to the field for which you want to have the table name then SAVE.
3) Go again to ST05 ---> Deactive Trace
4) List trace
5) Then search for the chaged value which u had done on that transaction.
6) With this you will be able to see the table name in the Obj. name column.
**How can we find out what tables are being referred for what field???.
For this , one way which i follow other then F1 is :
i follow Steps 2 and step 5 which help me to locate those values only for which i am looking for the table only as with the changed value in transaction which u had done in step 2 and after saving it it will go to the DB table and on searching the same changed value in the trace give u the quick link of the table .
It helped me many times and saves time by doing linke this otherwise u have got all the options to as suggested by the FORUM .
Cheers
Sunny
Rewrd points, if found helpful

Similar Messages

Plz help me to find out tables and fields........based on SD,PM,FICO Module

Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description          SAP-Term                                       Explaination
1.Salesman        Equipment AC Mgr.                          VBPA2 this is the salesman code - I need the
description for this.
2.Vendor              MEPO_TOPLINE-SUPERFIELD     Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
                                                                                structure from me23n in item data-account
                                                                                assignment-sales order. The number here should
                                                                                be the corresponding contract number. This field
                                                                                should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period   Val. Period Category                           Val. Period Category from va41 header-contract
    Category                                                               data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/    CAUFVD-GSTRP/                         This should be the document date where by it is in
    Purchase Order      MEPO_TOPLINE-BEDAT          between the range the user input
    Document Date
5. B2B Vendor      MEPO_TOPLINE-SUPERFIELD     Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
                                                                                me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost         MEPO1211-NETPR                       This cost is pulled from PO (me23n) however take
                                                                                note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
                                                                              NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults                                                          The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed                                                This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault   AFVGD-ISMNW                   This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost         RIHAUFK_LIST- DGESKOSIST   This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours      AFVGD-ISMNW                            This field is in IW41 in confirmation base on the
                                                                             order created. This field will be the actual time
                                                                             spent. This will correspond to the Faults Completed
                                                                             This means only orders with system
                                                                             status TECO will be pull. Take note service only
                                                                             take order type RD08.
12. Spare Cost   Spare part cost                              This field will be in IW33 under cost tab, and cost
                         PMCOEA-IKOSTENKGR                tab in item level. This will be the actual cost of spare
                                                                             part after TECO. This will include all order type.
13. Credit Note   Credit Memo                                 The programs need to pull out credit memo which is
                                                                             reference from the contract. If there is a credit memo
                                                                             reference from the contract then the value will be net
                                                                             price per equipment.

Can u tell me purpose of this spec ?
Regards,
pandu.

HOW WE CAN DO TRIAL AND ERROR METHOD TO FIND THE TABLES AND FIELDS?

HOW WE CAN DO TRIAL AND ERROR METHOD TO FIND THE TABLES AND FIELDS FOR ENHANCING THE AUTOMATIC SERIAL NUMBER PROFILE///

Hi
You can find user-exit for that. In user exit function you can use all import parameter. Set debugging in include program and you can see all import parameter.
Regards,
M Sajid

Script to find out table and index candidates to keep in the buffer pool

I am looking for a script to find out tables and indexes to keep in the buffer pool.
Could you help me on this ?
thanks...
Markus

this is more of a open question. As you know ur data well. We do not know whats ur data. cachin tables in buffer pool is okay, but it might age out after not being used...instead you can use the KEEP POOL...to cache small tables/popular tables into the keep pool...as keep pool guarantees full caching .....
here are some links on keep pool cacheing
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/memory.htm#sthref410
http://www.dba-oracle.com/oracle_tips_cache_small_fts.htm
http://www.dba-oracle.com/t_script_automate_keep_pool_tables_indexes.htm
http://www.dba-oracle.com/oracle_news/news_caching_keep_pool_large_objects_clob_blob.htm
Edited by: user630084 on Apr 8, 2009 5:48 AM

How to find all the DDIC tables and fields of Tcode?

Hi All,
For several transactions we have caprtured all the filed names along with the technical names.
Ex : in VA03 - in the initial screen ,postal code field is there.When i see F1 help for that field i could see POST_CODE2 as its technical name.
But i want to see the actuall DDIC table field which corresponds to this field that is LFA1-PSTLZ.
Like wise there are so many T-codes for which i need do the same thing.But for some transactions i am unable to find out the database tables and the corresponding fields.Please suggest any other easier way to do this.
Is there any way to find out all the DDIC tables and fields that gets updated for a Tcode?
Please help me out in this.
Thanks,
Jyothi D.
Edited by: jyothi dosapati on Mar 27, 2008 2:48 PM

HI,
DDIC tcode is SE11
GIVE THE TABLE NAME THERE AND CLICK DISPLAY
FOR EXAMPLE
TYPE LFA1 THERE AND CLICK DISPLAY....
Regards,
V .Balaji
Reward if usefull

How to find out table name for the field in the webUI

Hi.
I am in CRM2007.
So i go to the transaction code BSP_WD_CMPWB
In that i provide the component name as CRM_UI_FRAME.
I press the Test button.
So, it opend the WebUI.
I want how to find out table of the particular input field?
I mean from which table the data is retrived how to find out?
When i enter some thing in the input field how to find out in which table that data is stored?
By pressing F2 on the input field it opend View and Component Name.
I want find out table of that particular field. How to find it?
If anybody know about this explain it with Screen shorts if possible.
Thank You.
Krishna. B.

hi
goto tx genil_model_browser. Suppose you want to find fields reated to your order header eg sold to name. In component set write all and press F8. Then goto access object and in access object click on node BTAdminH. Click on attribute structure. Here you will find structure and attributes. If you click relationship then you will see all the relationship wrt btadminh. open any r/s that you require. and click on other object and attribute. You will get to know the structure.
Best regards
Pankaj kumar

How to find tables and fields in the standard program.

Hi to all,
              I am very new to ABAP,
            i am willing to write Report ,that is if i enter the vendor number i have to get item,quantity , name...with dateetc....
My approach was : i went to ME2L and i gave vendor number and date in that then i got some data ,then i got the program of that list ( it was there in bottom right) i.e, SAPMSSY0 .
           Then i entered in SE38,in that i go with Display Object LIst to find out the tables and fields,but i failed to found.
My question is : I can write the reports if i know the fields and tables location....
                          Here i want to know the ,if i enter the Vendor No, i have to get the regarding information about that NO,_for that i have to know the fields and tables_ of item and cost ....every thing ...
       if my question was not clear please ask me i will explain you again...
      Can you help me how to find...
Thanks in Advance
Bhanu.

Hi Bhanu,
   Goto transaction SE84 then follow the path
SE84-->ABAP DICTIONARY--->FIELDS---->TABLE FIELDS-->ENTER THE TABLE OR FIED NAME you want to find
    and EXECUTE the programm you will get all the information regarding that field or table.
    Hope this solves your problem.
Thank you,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Sep 1, 2009 12:57 PM
Edited by: PAVAN CHANDRASEKHAR GANTI on Sep 1, 2009 12:58 PM

Is there any way to find out wn was a table deleted apart from using audit

Is there any way to find out wn was a table deleted apart from using audit
Oracle version 9.2.0.7

SQL> SHOW USER
USER is "SCOTT"
SQL> CREATE TABLE test_delete AS SELECT * FROM emp;
Table created.
SQL> DELETE FROM test_delete;
14 rows deleted.
SQL> COMMIT;
Commit complete.
SQL> conn sys@orclsb as sysdba
Enter password: ******
Connected.
SQL> ALTER SESSION SET nls_date_format='DD-MON-RRRR HH24:MI:SS';
Session altered.
SQL> BEGIN
2     DBMS_LOGMNR.START_LOGMNR (
3           starttime => '02-FEB-2011 17:51:00',
4           endtime   => '02-FEB-2011 17:54:00',
5           options   => dbms_logmnr.DICT_FROM_ONLINE_CATALOG+
6                        dbms_logmnr.continuous_mine +
7                        dbms_logmnr.no_sql_delimiter +
8                        dbms_logmnr.print_pretty_sql
9                                  );
10 END;
11 /
PL/SQL procedure successfully completed.
SQL> set line 10000
SQL> SELECT scn ,timestamp
2         ,commit_timestamp, username
3 FROM v$logmnr_contents
4 WHERE
5   username = 'SCOTT'
6 AND TABLE_NAME='TEST_DELETE';
       SCN TIMESTAMP            COMMIT_TIMESTAMP     USERNAME
   2309736 02-FEB-2011 17:53:20                      SCOTT
   2309739 02-FEB-2011 17:53:20                      SCOTT
   2309769 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
       SCN TIMESTAMP            COMMIT_TIMESTAMP     USERNAME
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
   2309774 02-FEB-2011 17:53:59                      SCOTT
17 rows selected.
SQL>

HT5787 What do I do if my iPod was stolen and I checked my support profile and when I entered the serial # I got a message saying it has been registered to another Apple ID? Is there a way to find out that Apple ID so that we can locate the iPod?

What should I do if my iPod has been stolen and when I checked my support profile and entered my serial # and I received a message that the serial # had been registered to another Apple ID account? Is there a way to find out the Apple ID that it was registered to? I have already checked find my iPod and it shows my iPod is offline. I have already filed a police report.

No, sorry, there is no way you can get that information. The police perhaps could, but it would probably require a court order and it's unlikely the police will go to those lengths unless they have reason to believe that this theft was not an isolated instance and hence worth more of their time than the single theft of an iPod.
Even if they got the ID, it may well just be yours. Apple's registration database often contains such errors; I get the same message for some of my devices when I know I registered them to my Apple ID and the devices are all still right here.
Regards.

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

Is there a way to find out where iMessages are being sent from? I've received messages from an unknown email that are offensive and considered to be harassment.

Is there a way to find out where iMessages are coming from? I've contacted security personnel at my school and I'm brig harassed. I just want it to stop.

'''Here is an update to my former response.'''
Here is a safe way to look at an email which you think is suspicious:
* right click on the message and select 'Save As'
* the file name will be the email subject followed by an extension of .eml
* store it in a folder you can find easily, such as your Documents
* using your file explorer, right click on the file name and open it with Notepad or a similar text editor (NOT Thunderbird!)
* even though the format is not easy to read, you should be able to see who sent it to you, and also read the message text.
Since you are looking at the message in a text editor, there is no chance a link can activate something bad. I have used this method many times, and have found several spoofs of email names of my friends.

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?
I was just curious

Given that the phone doesn't track how much data is used over WiFi, no. And cellular data usage can be reset.

Need a way to find out if a DB link is being used and by how many users

Hi,
I have a dblink from database FINDB to TESTDB named "ftslink".
I need a way to find out if the dblink is being used and also how many users are acessing it at any instant of time.
Regards.

Hye,
After some searching i found what i wanted.
Check the below link on dblink -
[https://netfiles.uiuc.edu/jstrode/www/orasql/db_link.html|https://netfiles.uiuc.edu/jstrode/www/orasql/db_link.html]
Thanks.

HT4597 Someone reset my iPhone and it was not me is there a way to find out how they were able to access my info?

Someone reset my iPhone and it was not me is there a way to find out how they were able to access my info?

There are two ways to reset an iPhone, 1) the user actually using the iphone can perform a reset from Settings, and 2) a user to knows the iphone's iCloud ID and password and do a remote reset.
I'm assuming you didn't personally reset it while on the iPhone, so my question is ... does anyone else know your iCloud ID and password? Have you set up multiple devices (perhaps belonging to other members of your family - something you generally shouldn't do, if you don't want to sync the same data to all devices in the family) and used the same iCloud ID on all of them? Perhaps a family member or a "friend" of a member used Find My iPhone to locate yours and remote wiped it.

Have received an email from apple to say my ID has been used to download an emoticon package for £15.99 - it was not me. is there a way to find out which device it is? and to get my money back? ta

have received an email from apple to say my ID has been used to download an emoticon package for £15.99 - it was not me. is there a way to find out which device it is? and to get my money back? ta

It is a phishing attempt. Do not respond. Do not divulge any personal or financial information. You can use the address below to forward the suspect email message to Apple.
[email protected]
The link below has information to help identify fraudulent emails.
http://support.apple.com/kb/HT4933

A way to find out tables and fields referred by a transaction

Similar Messages

Maybe you are looking for