A window to be displayed in last page In smart form
Hi,
I have to display a window in last page . Its actually like a footer in which some information is diplayed.
so this footer shud be displayed in last page. Kindly any one guide me regarding this issue.
Thanks in Advance
Regards,
Neelima.
Hi,
u can do this by using some concept......
1. draw the main window upto the bottom where the footer is supposed to be....
2. draw the footer window as secondary window overlapping the main window at the bottom.
3. set the footer window event as 'Only after end of main window'.
4. in the main window create ur table...
5. In the footer of the table set Footer with height = 'same height as the footer secondary window'.
tick the 'at end of table' and untic the 'at page break'.
6. add a blank line type with blank text element(only few enters) on footer of table...
7. In the table line types. press details and tick the 'no page break' for the footer line type.
this will do the trick....
what happens here is, the footer window will only print at the end of the main window...if the main window ends at the bottom, then it will check whether there is space for the footer...if no space is available then it will go to the next page.. otherwise it will print the footer of the table (which is blank) and then print the footer window over it(which is of the same height as the table footer)...
Similar Messages
-
How to make a last page in Smart Forms
Hi,
I'm using 2 pages in my form, the first one (PAGE1) has a main window and prints out a table. The "next page" goes to PAGE1 since i dont know how many results i get.
Then I have a second page (PAGE2) without a main window, that prints out a text-module containing terms & conditions.
The problem is that when i run it, only PAGE1 is displayed.
How can i call PAGE2?Thank you so much Sasi, that solved it.
I was going nuts about this.
Best regards
BTW: Right now there seem to be no way of rewarding points to you. Those options are missing on my screen. -
How to get the last page SAP Script form
How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
RegardsHi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max -
How to display static HTML pages in Oracle Forms 6i
I want to display static HTML page in oracle Forms ? Can any body help please ? Its very urgent. Many thanks in advance.
Suresh,
there exist a Java Bean in teh Forms 6i demos that shows a static HTMl example. Note that the HTML that could be shown is somewhat basic, but it will give you an impression how it can work. The demos are at otn.oracle.com/products/forms --> samples --> 6i demos
Frank -
How to know no of pages in smart forms to be printed ?
Hi,
How to know no of pages in smart forms to be printed ?
though i got SFSY structure during run time of smartform , even that was not useful.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
for that Page &SFSY-PAGE& of &SFSY-FORMPAGES&
during debug of smart form i don't understand how it is calculating no of pages ,as i kept break point before printing page no in smart form.
please check my two screen shots, sfsy-formpage still contains current page no only but not total no of pages.
Help Required.
Thanks In advance.Hi Prakash,
You will not get these values during debugging.. Let the program execute completely, you will get the right values.
As Manish said, the value for &SFSY-FORMPAGES& will be known only after all the pages are processed, though it is not necessary that you use them in the final window only. It can be a text node in a window of any type.
You will get the desired output, just cant see them during debugging within the program. At the time of printing or in the print review, output would be as expected.
Also, FYI, it would be better to give total pages as &SFSY-FORMPAGES(3ZC)& as there can be error if the total number of pages exceeds 9, due to lack of sufficient space to print more digits -
How to print different header & item data in new pages using smart forms.
Hi,
In smart forms I am trying to print header data & their item data. But there are more than one header data for a given input.
I want to print all the different header data with their item data in new pages using smart forms. Can any one please help to solve the issue.. Its very urgent for me..
Regards,
BrajeshHi
U need to use control break statements to acheive ur requirement.
Regards,
Priya -
How do u get New page in Smart form dynamically
How do u get New page in Smart form dynamically
page break in smart form
Re: New Page in Smart Forms
Page break inside a loop in smart form -
Invoice Print Report Add. Layout needs to be displayed after Last Page
Hi,
I am working on Invoice Print Report multiple layout Customization with RDF as Query model and created RTF using BI Publisher DEsktop and have requirement of Repeating Header on all pages, Print Page Total on all pages and Grand Total, Total Payable , Payment Options on last page. This was acheived by <?start@last-page-first:body?><?end body?>. But in one of the layout there is requirement to start new page and display some usage report for the invoice. I tried several options like using splt page break then display the custom usage report. But since I have given start last page body anything after this page is not getting picked up.
Can you please help in resolving this issue.
Regards,
Amit KulwalHi SAMI Mohammed ,
I have same issue like your, but i have to diplay a window like footer with some information. i have done like above details .
But when there are one page its displaying at page 1 only If there are 2 pages then its not at all diplaying in any pages.So kindly guide me regarding this.
Thanks in Advance,
Regards,
Neelima -
Print Footer Window of PO Form at end of Last Page of PDF Forms(Adobe)
Hi,
I am trying to print PO form using PDF form which includes multiple line items. At the end of last page I am trying to print the footer window that contains Comments and Signature.
Right now my Footer Window is being printed immediately after the end of line items.
I have included the Comments text box and image inside a Sub Form.
Please let me know how to print the Footer window at the end of the page instead of printing immediately after the line items.
Thanks,
RekhaHi,
Please take the footer subform from the tables section and position it on the page where u want to print and write the script so that it will print only on last page.
Regards,
sasi -
**To branch to a new page in Smart forms after main window**
I have three pages where on second pages main window so my data many be carry on next 3, 4, pages and my requirement is to display data(like notes ) on last page after all contain of main window .that last third page is different formatting on basis of company code lets 10 different pages. On second page in main window I write u2018commandu2019 and General Attributes, Tick Go to new page in. On the Determine the new page using the list box next to the checkbox. The output of the main window will continues on the new page of third pages. I did this for my all company like (command for 10 , command for 11u2026.).BUT also on second page option of next page in General Attributes. Where in can maintain next pages entry is single...if I put blank the error comesu2026thingu2019s 1) what should I have to maintain in second page for next page.
2) how I get data from multiple page design (I design 10 pages from that I want one should display):- I used condition option in command for company still getting error .
So kindly help me for such scenario.
Edited by: nshahare on Aug 5, 2011 4:07 PMHi nshahare ,
Format the way you have asked the question, It is highly unclear what issue you are facing.
Be clear, be cool and then post(edit) the question again. we are here to help you.
BR
Dep -
Over flow issue while printing footer in last page in PDF forms
Hi,
Could any one let me how to display footer in last page only at end of page reserving 5cm of space.
I have designed my form with two pages:First Page and Next Page in Master Page
Body Page contains table details and some texts after the table lines.
First and Next Pages has footer(5cm) at the bottom.
If Page <> Last Page,footer is not displayed.
If page = Last Page, footer should be displayed at the very end of the page
I have a table with multiple line items. If the line items end in First page the footer should be displayed at the bottom of the page. If the line items flow to the next pages footer should be displayed in the last page only. Next pages should be using the footer space at the end of each page if it is not the last page.
If the positions are wrong can anyone suggest the position of the footer space and how to stop overflow of the line items onto the footerYou have to place the footers in 2 main windows.
write script to hide the footer if the current page is not last page. Use below script to find the total number of pages and current page in layout:ready event.
Var no_of_pages = $layout.pageCount ( )
Var curpage = $layout.page ( ref ( $ ) ) -
How to display multiple pages in smart forms
Hi Experts,
I am facing one problem in Smartforms. here i am using one page & main window, Mainwindow consists one TABLE, it contains 100 records. While printing this smartform, i am getting only one page and mainwindow was filled with only 80 records...remaining 20 records has to display in 2nd page but it was not displaying 2nd page at all.
Can any one please help me.
Thanks,
sreelakshmi.Hi,
Use the same page name in the general attributes-> next page of your created page.
Thanks
Arul. -
Problem regarding printing in first and last page of a form
I need to print a some text only in the first page and last page. I have defined a window to print this text. The number of pages that will be created is decided on run time. Can some body please help regarding this issue. I have tried to use SFSY-FORMPAGES to calculate total number of pages in the begining but it does not work
Edited by: subhajit bhadra on Feb 20, 2009 7:44 AMHi Badhra,
You can use conditions for that window or text element.
in conditions, tick 'only befor main window' forr header
and 'ONly after main window ' for footer.
Sunil -
Printing Footer Only on the last page of adobe Form
Hi Experts ,
I have a requirement of printing text only on the last page of the adoe Forms.
I know how to do this in Smart Forms , but being a novice in adobe forms i am unable to get the exact place to puth these conditions.
Please reply ASAP.
ThanksThanks .
Problem Solved.
Here is the Code snippet in Formcalc language that i used in the intialize event
var curpage = $layout.page ( ref ( $ ) )
var totpages = $layout.pageCount()
if ( curpage ne totpages ) then
$.presence = "hidden"
endif -
Printing text on last page of adobe form
Hi abapers,
My requirment is that i have to print a particular text in the footer.
But this has to be printed only on the last page.
how do i go about doing this.
thanks in advance.Hi Aditya,
Give the condition as.
If &SFSY-NEXT-PAGE & = 0.
print what text u wanna to print.
endif.
Best Regards,
Flavya
Maybe you are looking for
-
PLEASE HELP! My Ipod touch will not play anything from or in itunes.
I don't know what to do. For the first 4 months everything was great then all of a sudden my Ipod would no longer play anything from or in itunes. I can not transfer anything from itunes to it either. It looks like it has been transferred on the ipod
-
Why can't i install any updates to pse 10?
I get an error that says "please close Elements autoanalyzer.exe. I don't even have it running. Help!
-
Dynamic link problem, PPro cs5 - AE cs5, multi-cam sequence
This is odd. I'm working on a two camera interview in Production Premium CS5. Did the standard stuff - a source sequence with both cameras, did some rough editing here (syncing the two cameras, trimming the clips, etc.). Then nested the source sequen
-
Can iPod shuffle be used with any FM recivers for car listening?
Can my iPod Shuffle be used with any FM receivers so that I can listen to songs through my car radio? I know Alot of FM recievers say that they are compatable with variouse mp3 players. I just want to know if I can plug in my Ipod shuffle to any of t
-
How to delete referenced file on network storage
When I try to use the "delete master image and all versions" and check the "move referenced files to trash" I get an error saying that aperture doesn't have permission to move the file to the trash. I don't understand as I am opening the network volu