Aaaaargh!!

iWeb, brilliant, made my new page and love it, published it but the hyperlinks don't work from my own front page to the ones after it.. I assumed they would link automatically but is that the case? If not can anyone advise how to get them to link

Yes I suppose that was wishful thinking!!
The site is at
www.fairlyaverage.com
As I said earlier, everything in the iWeb interface on the computer is fine. When going on line and some of the pages can be found by typing in their address but the links at the top won't move you from page to page. Any advice gratefully received.

Similar Messages

  • TS1369 iPod Classic is not recognised by iTunes or by my PC (XP)

    Hi
    Since I updated my iTunes over a week agao I can no longer sync my iPod Classic as it is not recognised by iTunes or by my PC (XP).  Apple have been great so far and have sent me lots of links and called many times to try to resolve the issue, but to no effect.  They kindly agreed to replace the iPod as it appeared there is a hardware fault as a result of the update, BUT last night my housemate went to update his iPod Nano for his holiday (he uses the same PC but logs in under a different system user and has his own iTunes) and he now has the same problem!!!!!
    I have done everything on this link:  http://support.apple.com/kb/TS1369
    Checked the USB port works with other hardware (yes)
    Changed the iPod cable (yes)
    Removed and resinstalled itunes (yes)
    Placed iPod into disc mode (yes)
    Reinstalled the USB drivers (yes)
    None of it works!  Other hardware works in the USB ports and my iPod is recognised in my work PC!  So something during the iTunes update has caused a major problem that I can't seem to fix I assume on my PC.  When I reinstall the USB drive, the PC then has a pop saying that an ipod is connected, and then immediately after a new pop up saying there is a hardware issue! Aaaaargh.
    At a loss... Any suggestions?
    (The screen of my housemates iPOd nano went blank a few weeks ago and wasuseless, so an apple store replaced it for him; so his new nano is only 5 weeks old!)
    Cheers
    Howard

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • Problems installing HP Color LaserJet 5550 on Airport network

    I've been trying to install my dad's HP CLJ 5550 on our home network for ages.
    *This is some background story, skip to the last bit if you don’t feel like reading*
    Some months ago, everything was fine and dandy. We had a network consisting of:
    The modem from our ISP
    The switch from our ISP (I think that's what it was)
    1 Airport Express 802.11n
    2 Airport Express 802.11b/g
    The 802.11n AE was connected to the ISP switch with a standard CAT5 ethernet cable, and that was in turn connected to the modem, and was transmitting the signal to the two other AE's, one connected to our printer with an ethernet cable, the other connected to our home stereo for AirTunes.
    Then came the day when our ISP sent us a new modem, this time a wireless router/modem hybrid.
    I got rid of the switch and modem and replaced them with the upgrade.
    Furthermore, the new ISP router had WiFi built-in so naturally I wanted to take advantage of that, but in the end we ended up having 2 seperate networks, one transmitted by the ISP router and one transmitted by the 802.11n AE (which is connected to the ISP router w/ ethernet cable) to the other AE's.
    The ISP router network had great internet performance whatsoever, but I couldn't get the printer and AirTunes working.
    The AE network had very shaky internet performance but the network seemed very stable and served AirTunes and wireless printing.
    After some time I tried merging the 2 networks, by setting the AEs to join the current network that the ISP router was transmitting. It kinda worked, but we lost all printing.
    The printer is crucial to my dad so I suggested getting an AEBS so he bought that.
    *SKIP TO HERE*
    Now I've set the network up and it consists of:
    1 AEBS (802.11n)
    1 AE connected to the printer with an ethernet cable.
    2 AEs connected to 2 different stereos.
    1 ISP router (but this time I've disabled the WiFi!)
    The AEBS creates the network, gets its internet connection from the ISP router, and is extended by the 3 AEs. Very fast, stable and AirTunes performs great... But the printer.
    I’ve set the printer to TCP/IP and manual config.
    The IP adress I’ve set to 192.168.1.150 (in line with the rest of the network)
    Subnet mask is set to 255.255.255.0 since that’s what Airport Utility says.
    Gateway Adress is set to 192.168.1.1 which I guess is the ISP router? I don’t know. It’s just what Airport Util says. Should it be the AEBS’s adress?
    Are there things that I need to disable on printer? On the network? On my computer? Enable? Something? Aaaaargh..
    I get nothing from pinging the IP-adress. Back in the golden days it used to recognize it as an HP printer it even checked ink levels and so forth.. Now I can’t even ping.
    I’ve tried changing every parameter I can think of.. Adding it as LPD, IPP and HP JetDirect Socket.. (but since I can’t even ping what would I get from changing that?)
    That turned out a wee bit longer than I expected...

    The Firewalls are disabled and from my laptop you can view all of the shared
    Folders on the Desktop with the CP1215 attached via USB.
    When I issue the print from my laptop that is on the same network, you see the
    print file show up in the CP1215 print queue of the Desktop the CP1215
    is USB attached to and then disappears about 15 seconds later.  Here is
    how it appears on in the Desktop CP1215 Print Queue before it disappears
    Doc Name            Status      Owner     Pages    Size            Submitted            Port
    E-mail print           Printing      Guest          1      547 KB     2:00pm 08/26/09      USB003
    I've also download/installed the latest drivers.  When I reinstall the CP1215 on my laptop from
    the Desktop, the "PRINT TEST PAGE works from the Laptop but then all print commands after
    that do not work.
    I see from my Google search I'm not the only one having this problem
    ANY IDEAS what to try next? 
    Wes

  • N97 mini hugely disappointing

    Where do i begin...i'll try to be brief. I know the vast majority of my complaints have probably been raised on numerous occassions but i feel the need to vent myself.  Just as a bit of background about myself  I have spent six years in various technical support roles for both Orange and T-Mobile Uk so would rate myself as 'reasonably clued up' when it comes to using a handset (probably why i'm so frustrated).  The issues so far are in no particular order; error messages (memory full, close some applications and try again) when all i want to do is read a text message, and having to pull the battery out to fix.  Fluctuating signal  AAAAAAArgh!!! between full 3.5g and unable to make a voice call in my own home in the same spot.  If i didn't have WLAN access the phone would be unusable for anything other than poor quality voice calls.  I am also now unable to use my phone at work.  Unable to remove unwanted unused apps Qik, Boingo, Joikuspot etc.  The phone is MY property, its not on lease and I should be able to do what i want with it.  Email...unreliable delivery (i once got mails two days late) and entire days mails going missing from my phone despite still being in my gmail account.  Nothing appears to be easy to do.  I foolishly traded in my T-Mobile G1 for this pile of garbage and despite being an eighteen month old model it was still streaks ahead of the N97mini.  I could add shortcuts to my home page, on the mini i can only add widgets (if they are available) which drain my battery in a day (or less),  The integration of my gmail account was obviously seemless and trouble free.  The apps store for the G1 was superb and reasonably priced wheras the ovi store is lacking in content and overpriced (£25 for a dictionary, what a joke).  The touch screen was a dream to use, as was the internal browser, and I never felt the need to change it for anything else.  The mini's browser is awful, slow and unable to display most of the much publicised flash content (apart from rolling adverts which is nice) and you cant even download flash video content to real player to play seperately.  If you get a message saying to need to upgrade your flash player you are taken to the adobe site which doesnt recognise the handset...AAAAArgh...and I cant set my default browser as the far superior opera5 beta 2 (which I urge you to try)...I could go on...general rant over,  an official response from Nokia would be nice, but I won't hold my breath...

    hi there could i ask how you resolved the problem of when it says memory full close some applictions please because i am having the same problem and tryed everything.
                                      many thanks joe 
    Message Edited by littleclueless on 06-Jan-2010 08:56 PM

  • Lion OS and Epson printers not printing photos through Aperture or CS4

    Hi everyone,
    I have done a search on the above topic but nothing obvious is coming up as a solution (ie...sorry if it has been done before)
    It's driving me mad.
    I have 2 epson printers, R300 and Stylus 1400. 
    They were both performing perfectly well before installation of osx lion.
    They will both print word and pages documents perfectly, they will also print from pdf and screen dump.....so they are mechanically ok, (paper loaded correctly, loads of ink etc etc )  now, here is the issue.....
    When I try to print a photo from either CS4 or Aperture the information seems to send to the printer, the printer icon jumps up and down and the text for the jobs queue says 'printing'....the printer 'shunts' as if engaging to print, doesn't do anything else and tells me a second later that the status is 'completed'.....but it hasn't printed anything!!!    aaaaargh
    I have been to the epson website and downloaded the latest drivers....same outcome.
    I have even been on the live assistance thing on the epson website, no help at all, assistant didn't seem all that competent.
    Anyone have/had a similar problem.
    Words of one syllable if there is a fix, I am savvy but not expert.
    Cheers
    Rob

    Hi nenavella,
    One more thing you could try, the problem re occurred for me on a different printer and I found the reason for the fault by accident, a longish story but stick with it:
    I had set up an unusual custom paper size so that I could print off passport photos for a client....for reasons I don't quite understand (probably my own stupidity!) that paper size became the default size for that printer...very rarely used...so any time I tried to print anything on that printer that wasn't passport photo size...it behaved exactly like my previous issue, made all the right noises etc etc but didn't print.
    To cut a long story short: On that particular printer, every time I print anything I have to go to 'Page Setup' and change it to an appropriate size (A4, 6x4, A5 etc etc...anything but UK passport size of 35mm x 45mm) before I hit the print button.
    It may be worth checking that your printer hasn't somehow 'obtained' an odd page set up parameter somewhere/somehow.
    If it isn't this I hope you find the problem soon, I know how infuriating it can be.
    Cheers
    Robin

  • Frozen screen...stuck on apple icon after turning on

    ok my iphone froze so i powered down my phone and tried to restart it. The apple icon appears and disappears and does it again viscious cycle so i can t use my phone all i can do is turn it off what should i do? Aaaaargh!!!

    First, try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If that doesn't work, connect to iTunes and restore.

  • The grid array of my photo library has disappeared

    iLife 08, iPhoto 6.0.6, Snow Leopard 10.6.8, iMac Intel Core 2 Duo
    I loaded my 4th of July pictures and began editing them, but in the afternoon of July 5th the screen changed from the scrollable grid array of my entire iPhoto Library to just one big photo at a time, no editing tools available.
    This has me completely stuck as this mode eliminates any means I have of seeing my photos (except one by one) and editing, saving, sending...
    Aaaaargh!

    Look at the scroll bar at the bottom and move it to the left to get the thumbnail size you want.
    OT

  • Audio engine overloaded (this is not the usual problem!)

    Hi people
    it's so frustrating I could cry. This is not the usual "I have 10 software synth running and get overload message".
    Bottom line is: Even with a new project and logic stopped the CPU meters go up to 100%. It happens every 5 - 15 secs. What is strange that the system monitor does not show these spikes. I know it's just sampling but at least some of the spikes should be caught by the monitor. But it's steady at around 10-15% user and system. There is of course no other process eating cpu.
    Console looks like this:
    Mar 5 00:34:13 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:34:43: --- last message repeated 1 time ---
    Mar 5 00:37:11 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:39:34 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:40:04: --- last message repeated 1 time ---
    Mar 5 00:41:15 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:42:40 noname Logic Pro[902]: Audio engine overloaded, resetting
    I swear: yesterday everything was fine. Now it's not working anymore. I'm a developer with 10 years coding and debugging experience but I can't find the solution. I had this problem before. Everything was running smoothly for months and one bad day the problem started. I could not find a solution till I gave up and reinstalled the whole system which took me about 3 days to get everything in place again. Again everything fine for about 3 months.
    Not matter what I try - deleting prefs. Starting logic as a new user. Reinitializing everything. Doesn't help. Is there anybody out there who had that problem too? I don't want to reinstall everything again.
    Cheers,
    Daniel
    Message was edited by: doubleday

    I using a Line6 TonePort (I am a guitarist).
    To make sure that its not the drive (though nothing changed there) I switched setting to internal audio - but that didn't change a thing.
    And yes I tried the basics. I also disabled all plugins / AUs in the AU-Manager but I haven't tried to move them away. Give that a try this eve.
    It's really strange. It doesn't matter wether it's a new empty project or any other that worked with no probs. Even if logic is stopped and there's no input monitoring: CPU load is flat and then every xyz secs boooom 100%. And its real because it actually interrupts the sound of my guitar or whatever.
    I might have to dig deeper and see if I find any tracing tools which might provide more info..
    Aaaaargh!
    The only thing I actually might tried the first time yesterday evening which I haven't done before is a roland vdrum via midi to ultrabeat but how could that mess things up? I dunno ...

  • 80gb Classic - registration loop and can't update firmware to 1.0.2

    I finally talked my dad into getting an iPod and now he regrets the decision.
    We downloaded the latest version of iTunes, set up his library on an external hard drive, and spent several days ripping his extensive CD collection to the hard drive. When the time came to finally sync the iPod, everything went well until I clicked "update" to update the firmware to 1.0.2. It downloaded OK, but when it tried to install the update, we got the following error message: "The iPod Could not be updated. You do not have enough access priviledge for this operation." When we disconnected and reconnected the iPod to try it again, we had to go through the registration process again. This has happened each time we try to sync the iPod. This is on a Vista machine, and my dad was logged in with administrator access, so we're kind stumped as to what the problem may be. We've tried uninstalling and reinstalling iTunes, and resetting the iPod, to no avail. Any suggestions?

    We have uninstalled and reinstalled itunes again, and this time it seems to have solved the problem. Now we're having another one which I'm currently scanning the forum for solutions. Now he's getting repeated albums in the album list view. The same two albums are repeated on the iPod 13 times, where they are only in iTunes once. We tried using iTunes to restore the iPod, and we got the same "insufficient access priviledge" error message. AAAAARGH!!!
    But in answer to your question, Mobbie, I believe we have another computer we can use. Since the music is on an external hard drive, it shouldn't be too hard to try that to fix this new problem.
    Message was edited by: sdimartino

  • Disable iphoto when importing digi pics?

    whenever i load pics from my camera, iphoto automatically opens. how do i disable this?

    Thank you, thank you, thank you, thank you, and THANK YOU.
    Aaaaargh! I've been trying to figure that out foh-eva! No offense to anyone who likes eyeFoto, but I didn't buy Adobe CS so that popping in a memory card launches a program that makes a cryptic hierarchy of folders that cannot be navigated in Finder without heavy medication!!!! Let me make my own freekin folders, in a way that makes sense! Ooooof!
    Bless you, you have released me from eyePhoto heck!!!!!!!!!!!!!

  • Migration Assistant password woes w/ Mountain Lion

    Having a bag of hurt trying to migrate from an old iMac to a new Retina Display MacBook Pro.
    Using Carbon Copy CLoner, I cloned my iMac's drive to a USB external, to simplify/automate migrating the data to the MBP. The transfer went normally, but the MBP is refusing to recognize my password when I try to login.
    Steps I've taken so far:
    - Booting the MBP from the USB external connected to the MBP. Works fine, with no password problem.
    - Booting to the Recovery partition, erasing the main drive, and reinstalling the OS, then running Migration Assitant over again. Long process, same password trouble.
    - Erasing main partition again, then running Migration Assistant directly from the source iMac via wireless. Slow, but it worked. And I got the same result: pasword not accepted.
    - Creating a Test User account with no data migration, then loggin in at the App Store to download the previously purchsed Mountain Lion installer. (The MBP is brand new, but shipped with Lion instead of Mountain Lion). At the end, I got some cockamamie "can't download" error.
    Aaaaargh!!
    Could it be related to the iMac haivng been upgraded to Mountain Lion before the process bega, while the newly-arrived MBP had Lion installed? I wouldn't think that would screw up a simple data migration, but...
    Anyone?

    http://support.apple.com/kb/ht4889
    Migration from Mac OS X v10.4 Tiger to OS X Lion
    Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
    Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
    On the Mac you want to transfer data from, Restart, and immediately hold the T key.
    Wait for the FireWire logo to appear on the screen.  If it does not, restart and try again.
    Connect both Macs via the FireWire cable.
    On the Mac you want to transfer data to, Open the Migration Assistant application.
    Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
    Select the option "From a Time Machine backup or other disk" and click Continue.
    Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
    EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

  • 80GB Classic, Restoration Loop

    My 80GB iPod Classic crashed, every time i turn it on it displays the apple logo and then goes straight to the red X. It will not enter disk mode and if i hold the reset button without letting go when its plugged in the computer will recognise it and tells me i need to restore my iPod. When i click restore it cannot complete the initial progress then the ipod turns back on and goes to the red X. The computer does not recognise the iPod in my computer or anywhere else on my computers hard drive. After reading essentially every support article on the issue ive taken to posting the issue myself to see if anyone knows anything further? Any help would be greatly appreciated because paying to have it fixed is out of the question due to lack of money. Thanks.

    We have uninstalled and reinstalled itunes again, and this time it seems to have solved the problem. Now we're having another one which I'm currently scanning the forum for solutions. Now he's getting repeated albums in the album list view. The same two albums are repeated on the iPod 13 times, where they are only in iTunes once. We tried using iTunes to restore the iPod, and we got the same "insufficient access priviledge" error message. AAAAARGH!!!
    But in answer to your question, Mobbie, I believe we have another computer we can use. Since the music is on an external hard drive, it shouldn't be too hard to try that to fix this new problem.
    Message was edited by: sdimartino

  • Mac Pro 8 core - great, but not great... Any ideas please?

    Hi Guys,
    Firstly, let me say I'm Apple Certified in FCP so I'm not a newbie, however I am having a hard time coming to terms with my current situation.
    My G5 Quad appeared to be struggling on some basic (3 layers of text) real time stuff in PAL DV, and I was lucky enough to be able to upgrade to a Mac Pro 8 core 3.0GHz last week. "That will sort my stuttering problems" I thought...
    No it doesn't. Any new basic text (Boris) or any dissolve makes the playback jump, possibly worse than the G5 did. Aaaaargh! Anyone got any ideas why this shouldn't play back a dream?
    Also, does anyone know why the Blackmagic never appears as an option in the Effect Handling section of System Settings?
    Hope you can all help soon.
    p.s. I have not got any media on my startup disk, and the second disk is almost empty...

    Assuming your Scratch Disk is on the 2nd drive inside the Mac Pro, then let's see if that drive might be under-performing. Download Kona system Test v3 from http://www.aja.com/html/supportkona3swd.html and install it.
    Run the test on both drives, using the largest file size. Please report back on the read & write numbers you get on each drive.
    BTW, journaling should make no discernible difference on a SATA 3Gbps hard drive, and you most definitely SHOULD enable journaling on your boot volume. It doesn't matter either way for the media drive, but if you do not enable journaling for the boot volume, it will bite you in the butt someday. Trust me on that.
    Besides, journaling takes zero action on a disk read, which is what you are having problems with. It takes a tiny bit of time for the write heads to write the data to the journal, but not enough to make any real difference for your extremely speedy Mac Pro. The location of the journal file is on the outermost tracks on the platters, the fastest ones.

  • Unknown error -3256 when trying to connect to itunes store

    since I updated to itunes 7.0 I can't connect to the itunes store anymore. I really want to purchase new music and for over 3 weeks I haven't been able to connect anymore. It's so annoying! My internetconnection is always working perfectly. I have tried updates, reinstalled everything, but I can't get it to work. I would be so greatful for help!!!
    The exact error message is: I tunes could not connect to itunes store du to an unknown error (-3256)

    Dito to everything that has been said so far! In the UK though, we don't even have a phone number to be able to actually speak to someone about this. Apple better get on it and put some kinda statement on the site about it. Hate to admit this, but I've spent nearly the whole of Christmas Day stressing about this!! AAAAARGH!! Let's hope it gets sorted. However, I have read some other topics about it and other people are saying that their ipods stopped working after d/loading the latest software... Was gonna consider uninstalling it but without it you can't actually d/load any vids!! Total catch 22!
    Merry Christmas folks! Let's keep our fingers crossed that it gets sorted!
    Jill xxx

  • Connecting Eclipse Hana Dev Studio to CAL HANA Dev Edition  on AWS

    I have recently created a HANA dev Edition Instance in CAL using my AWS account. I have an eclipse HANA dev studio on my PC.
    I have been trying for hours to get the dev edition system added to my systems  in the dev studio AAAAARGH!
    Can someone please put together a screenshot run through of how to do this for this idiot to follow?
    I have read several blogs but none are terribly clear on what information in the dialogs in the hana studio relate to which elements on CAL or AWS.
    For instance:-
    Landscape host = ??? from where (IP address of instance supposedly but which one in the CAL instance detail as there are two ip addresses shown,
         an internal and an external). One blog talks about an elastic IP but  I haven't seen one labelled as such anywhere.
    Account name... This supposedly begins with a small letter but my account name for CAL does not, so confusing!! What account name is this meant to be?
    User Name = CAL user name or AWS user name?
    Password = password from where. Is this the CAL password or the aws ACCOUNT PASSWORD.
    Any help may well save me from a trip to the funny farm!
    NOTE I am adding the system as a cloud system.
    Cheers,
    Ross G.

    Hi Ross,
    Let's see if we can't get you through this really quickly.
    1) Are you on a corporate network that has ports blocked? If so the HANA Studio will not connect as it needs additional ports like 30015.
    2) If you are on a public internet with nothing blocked then under the SAP HANA Development perspective in HANA Studio you need to click (left side under "Systems" tab) "Add System"
    You need the IP of your server (most likely the public IP) and the fact that the instance is "00". An Elastic IP is the same as the IP the difference is that this IP is static and does not change when you start or stop the instance.
    Description is nice if you have a lot of systems.
    Then your user name and password.
    That's all you need. The best way to check is to be sure that you can open the server in your browser window (just enter the IP address) - or use the "connect" option in CAL.
    Craig
    these videos may also help.
    https://www.youtube.com/watch?v=yDAy4ufldtk
    SAP HANA Academy - SAP HANA installation: 5. Studio on Mac OS X - YouTube

Maybe you are looking for