ABAP Client proxies: structure/internal table error

Hi All,
We are getting following error when we check for errors in ABAP program for ABAP client proxies:
"RECORDS" is not an internal table - the "OCCURS n" specification is missing.
Let me explain the scenario and proxy objects its generated and proxy objects we are refering in program:
Its syncrounous client proxy scenario.
In XI:
We have DT_Req, MT_Req, DT_Res, MT_Res and MI_Sync_OB (O/p Message: MT_Req, I/P message:MT_Res)
Proxy Objects generated:
ZCO_MI_SYNC_OB
ZMT_REQ
ZDT_REQ
ZDT_REQ_RECORDS
ZMT_RES
ZDT_RES
ZDT_RES_RECORDS
ZDT_RES_RECORDS_TAB
ABAP Code:
REPORT ZTEST_DELETE.
DATA:
lo_history         TYPE REF TO ZCO_MI_SYNC_OB,
lo_sys_exception   TYPE REF TO cx_ai_system_fault,
Structures to set and get message content
lv_history_req_mt TYPE ZMT_REQ OCCURS 0 WITH HEADER LINE,
lv_history_res_mt TYPE ZMT_RES,
lv_history_req_rec TYPE ZDT_REQ_RECORDS,
lv_history_res_rec TYPE ZDT_RES_RECORDS.
lv_history_req_rec-VLAUE = SY-DATUM.
APPEND lv_history_req_rec TO lv_history_req_mt-MT_REQ-RECORDS.
CREATE OBJECT lo_history.
TRY.
Call outbound Proxy
    CALL METHOD lo_history->execute_synchronous
      EXPORTING
        output = lv_history_req_mt
      IMPORTING
        input = lv_history_res_mt.
Error handling
CATCH cx_ai_system_fault INTO lo_sys_exception.
    SKIP 2.
    WRITE:/ lo_sys_exception->errortext.
    RETURN.
ENDTRY.
When we execute this program we get following error:
"REC" is not an internal table - the "OCCURS n" specification is missing.
Can anybody please fogure out the why we getting this error??
We had the similar kind of scenario working. Only one difference in the proxy objects generated:
In working scenario we had the _TAB object genearated for the Req
In our current scenario _TAB proxy is generated for the Res.
Thanx
Navin

Hi Moorthy,
Everything you said is done. Still get the same error.
Hi Mario,
I tried to define with your example a, still I have problem.
I think I kind of figure out the reason.
As I mentioned in the first post (question), proxy object "ZDT_RES_RECORDS_TAB" has created for the object data type DT_RES. The fields in the data type "DT_RES" are already existing in the SAP.
The fields in the data type DT_REQ are not in the SAP, and in the proxy objects its not generated any kind of TABLE. I think this is the reason we are getting error ""RECORDS" is not an internal table - the "OCCURS n" specification is missing." either we define
lv_history_req_mt TYPE ZMT_REQ OCCURS 0 WITH HEADER LINE, OR
lv_history_req_mt TYPE ZMT_REQ,
Does it make sense what I was explaining above???
Any lead on this would be great.
Thanx
Navin

Similar Messages

Binding Structure/Internal Table to Workflow from Webdynpro

Hi Gurus,
I have to trigger workflow from WEBDYNPRO application. For now I have two ways they are:
1. Triggering WFLow using SAP_WAPI_START_WORKFLOW (Successfull):
How could I bind Structure/Internal Table (DDIC referred structure) to workflow directly. Presently I am mapping indvidual fields which makes my code complex using FM SAP_WAPI_START_WORKFLOW.
2. Triggering WFLow using SAP_WAPI_CREATE_EVENT (Bindind issues):
Also When I try to submit using BOR event with SAP_WAPI_CREATE_EVENT workflow triggers successfully But I cannot able to bind the values. So are there any specific configuration need to be made.( like making task as General while triggering workflow using SAP_WAPI_START_WORKFLOW).
<<text removed>>
Edited by: Matt on Aug 5, 2011 7:49 PM

Hi
Please make use of the below code
INCLUDE cntn01_swc.
DATA lt_kna1    TYPE TABLE OF kna1.
DATA lt_cont    TYPE TABLE OF swcont.
DATA lv_wiid    TYPE          sww_wiid.
swc0_create_container lt_cont.
SELECT * FROM kna1 INTO TABLE lt_kna1 UP TO 10 ROWS.
swc0_set_table lt_cont 'CUST' lt_kna1.
CALL FUNCTION 'SWW_WI_START'
EXPORTING
    creator                      = sy-uname
    task                         = 'WSXXXXXXXX'
    do_commit                    = 'X'
IMPORTING
    wi_id                        = lv_wiid
TABLES
    wi_container                 = lt_cont
EXCEPTIONS
    id_not_created               = 1
    read_failed                  = 2
    immediate_start_not_possible = 3
    execution_failed             = 4
    invalid_status               = 5
    OTHERS                       = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
The other way to do is you can also make use of OO ABAP classes to trigger the workflow. If you want to create a rfc function module then create a wrapper function module .
SAP_WAPI_START_WORKFLOW cannot transfer structures or tables which are more thatn 255 characters. So the work around is either make use of OO container or SWCONT container.
The above code snippet should be included in the assistance class of the webdynpro application and you need to include the define the include cntn01_swc in the class local types under macros.
and then you create a method ....... and include the above code in that method.   excluding the include statement.
Regards
Pavan

Structure & Internal Tables

What is the difference between Structure & Internal Tables,
Regards.

Hi chidambar,
to say simply the internal table can have data within it but a structure is that which can be used by an internal table to define its columns ,it cannot have data on its own
coming to thoery this may help you,but dont confuse more with the theory
Structures
A structure is a sequence of any elementary types, reference types, or complex data types.
You use structures in ABAP programs to group work areas that logically belong together. Since the elements of a structure can have any data type, structures can have a large range of uses. For example, you can use a structure with elementary data types to display lines from a database table within a program. You can also use structures containing aggregated elements to include all of the attributes of a screen or control in a single data object.
The following terms are important when we talk about structures:
Nested and non-nested structures
Flat and deep structures
A nested structure is a structure that contains one or more other structures as components. Flat structures contain only elementary data types with a fixed length (no internal tables, reference types, or strings). The term deep structure can apply regardless of whether the structure is nested or not. Nested structures are flat so long as none of the above types is contained in any nesting level.
Any structure that contains at least one internal table, reference type, or string as a component (regardless of nesting) is a deep structure. Accordingly, internal tables, references, and strings are also known as deep data types. The technical difference between deep structures and all others is as follows. When you create a deep structure, the system creates a pointer in memory that points to the real field contents or other administrative information. When you create a flat data type, the actual field contents are stored with the type in memory. Since the field contents are not stored with the field descriptions in the case of deep structures, assignments, offset and length specifications and other operations are handled differently from flat structures.
Internal Tables
Internal tables consists of a series of lines that all have the same data type. Internal tables are characterized by:
The line type, which can be any elementary type, reference type, or complex data type.
The key identifies table rows. It is made up of the elementary fields in the line. The key can be unique or non-unique.
The access method determines how ABAP will access individual table entries. There are three access types, namely unsorted tables, sorted index tables and hash tables. For index tables, the system maintains a linear index, so you can access the table either by specifying the index or the key.
Hashed tables have no linear index. You can only access hashed tables by specifying the key. The system has its own hash algorithm for managing the table.
You should use internal tables whenever you need to use structured data within a program. One imprint use is to store data from the database within a program.
plz reward if helpful,
plz get back to me for further queries.
thanks and regards,
srikanth tulasi.

ABAP Client proxies: extract data from the response and update Z table

Hi All,
I have following ABAP code for client proxies:
We have DT_Req, MT_Req, DT_Res, MT_Res and MI_Sync_OB (O/p Message: MT_Req, I/P message:MT_Res)
Proxy Objects generated:
ZCO_MI_SYNC_OB
ZMT_REQ
ZDT_REQ
ZDT_REQ_RECORDS
ZDT_REQ_RECORDS_TAB
ZMT_RES
ZDT_RES
ZDT_RES_RECORDS
ZDT_RES_RECORDS_TAB
ABAP Code:
REPORT ZTEST_DELETE.
DATA:
lo_history TYPE REF TO ZCO_MI_SYNC_OB,
lo_sys_exception TYPE REF TO cx_ai_system_fault,
Structures to set and get message content
lv_history_req_mt TYPE ZMT_REQ OCCURS 0 WITH HEADER LINE,
lv_history_res_mt TYPE ZMT_RES,
lv_history_req_rec TYPE ZDT_REQ_RECORDS,
lv_history_res_rec TYPE ZDT_RES_RECORDS.
lv_history_req_rec-VLAUE = SY-DATUM.
APPEND lv_history_req_rec TO lv_history_req_mt-MT_REQ-RECORDS.
CREATE OBJECT lo_history.
TRY.
Call outbound Proxy
CALL METHOD lo_history->execute_synchronous
EXPORTING
output = lv_history_req_mt
IMPORTING
<b>input = lv_history_res_mt.</b>
Error handling
CATCH cx_ai_system_fault INTO lo_sys_exception.
SKIP 2.
WRITE:/ lo_sys_exception->errortext.
RETURN.
ENDTRY.
<b>Now I have my response data in the internable "lv_history_res_mt-MT_REQ-RECORDS" which is deep structure.
How do I extract data records (multiple) from the above internal table and update to Z table??</b>
Thanx
Navin

Hi Navin,
go to SPROXY, flag structure and search for your table definition. You will find a table definition a field "line" or something, where you find the right structure. Create a new structure with DATA: myStructure type tableStructure. Define a second structure type with your Ztable. Next Loop at internal table into the structure. Inside that loop fill the Zstructure. Insert the Zstrucure (Press F1 on insert to have the syntax you need)
loop at internalTable into intStructure.
zstructure-myField = intStructure-myField.
INSERT ztable FROM zstructure.
endloop.
Regards,
Udo

Error or Trace of SOA ABAP Client Prox

Hi all,
i have successfully created ABAP Client Proxy for a WebService and configured the port using LPCONFIG. There i can configure the trace level as well - but now my questeion: where do i find these traces, errors ?
Thanks for any help.
Regards,
André

Hi everybody,
Now have found out on my own that these traces goe's to the files like dev_rfc on the SAP filesystem which can be viewed with AL11. Is there any other tool to have a more user friendly view on these traces as you can not be sure in which of the 10 ore more dev_rfc trace files your errors are in.
Thanks for any help.
André

ABAP proxy code using internal table

Hi XI guru's,
Good Afternoon,
My Scenario is ABAP Proxy to file using ztable.
i am getting data from Sap R/3 data base as Ztable. using this Ztable i have to write ABAP Proxy code. I generated ABAP Proxy and mentioned all below.Please send me ABAP Proxy code using this details. This is very urgent. Please help me.
ABAP proxy class:   zco_mioa_tata
structure              :   zmt_tata
structure                :   zdt_tata
structure                :   zdt_tata_employee
Table                :   zdt_tata_employee_tab
Ztable                :   zcnu_proxy_table
outbound structure:
mt_tata
    employee
thanks and regards
sai

Sai,
I guess this will help you.
1. Proxies can be a server proxy or client proxy. In our scenarios we require proxies to send or upload the data from/into SAP system.
2. One more thing proxies can be used if your WAS ≥ 6.2.
3. Use Tcode SPROXY into R/3 system for proxy use.
4. To send the data from R/3 system we use OUTBOUND PROXY. In Outbound proxy you will simply write an abap code to fetch the data from R/3 tables and then send it to XI. Below is the sample code to send the data from R/3 to XI.
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sarvesh'.
it-emp_profile_msg-empno = '01212'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work.
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
ENDTRY.
Receiver adapter configurations should be done in the integration directory and the necessary sender/receiver binding should be appropriately configured. We need not do any sender adapter configurations as we are using proxies.
5. To receive data into R/3 system we use INBOUND PROXY. In this case data is picked up by XI and send it to R/3 system via XI adapter into proxy class. Inside the inbound proxy we careate an internal table to take the data from XI and then simply by using the ABAP code we update the data inot R/3 table. BAPI can also be used inside the proxy to update the data into r/3.
I hope this will clear few doubts in proxy.
Just go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
ABAP Server Proxies By Siva Maranani
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Generating java proxies..
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
/people/rashmi.ramalingam2/blog/2005/06/25/an-illustration-of-java-server-proxy
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Regards,
Sarvesh

Simple Transformation - XML to Internal Table Error

I have a webservice call that returns XML. I need to transform a portion of the response to an internal table, but my simple transformation is not working with loop processing. I have read through most posts regarding the topic but they're either too old or related to serialization. There aren't any exceptions thrown, but I don't get any data in the internal table (PAPERWORK root). Below are some code snippets. Any ideas on the problem with the XSLT template? Thanks.
Sample XML:
<?xml version="1.0" encoding="utf-8" ?>
<PrintVersionDataSet>
<Result>
<ReturnCode>W</ReturnCode>
<ReturnMessage>There are reports with later version(s)</ReturnMessage>
</Result>
<Paperwork>
<ReportCode>CVR</ReportCode>
<ReportName>Cover Sheet</ReportName>
<Version>2</Version>
<PrintedDateTime>2009-05-01T09:54:04.1-05:00</PrintedDateTime>
</Paperwork>
<Paperwork>
<ReportCode>SPS</ReportCode>
<ReportName>Sponsor Summary</ReportName>
<Version>2</Version>
<PrintedDateTime>2009-05-01T09:54:04.99-05:00</PrintedDateTime>
</Paperwork>
</PrintVersionDataSet>
XSLT Code:
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="RESULT"/>
<tt:root name="PAPERWORK"/>
<tt:template>
    <PrintVersionDataSet>
      <Result tt:ref="RESULT">
        <ReturnCode>
          <tt:value ref="RETURNCODE"/>
        </ReturnCode>
        <ReturnMessage>
          <tt:value ref="RETURNMESSAGE"/>
        </ReturnMessage>
      </Result>
      <tt:deserialize>
        <tt:loop ref=".PAPERWORK">
          <Paperwork>
            <ReportCode>
              <tt:value ref="REPORTCODE"/>
            </ReportCode>
            <ReportName>
              <tt:value ref="REPORTNAME"/>
            </ReportName>
            <Version>
              <tt:value ref="VERSION"/>
            </Version>
            <PrintedDateTime>
              <tt:value ref="PRINTEDDATETIME"/>
            </PrintedDateTime>
          </Paperwork>
        </tt:loop>
      </tt:deserialize>
    </PrintVersionDataSet>
</tt:template>
</tt:transform>
ABAP Call to Transform Data:
TRY.
CALL TRANSFORMATION Z_GA_PAPERWORK_VERS_WEBSVC
      SOURCE XML LS_RESPONSE-VERIFY_PRINT_VERSION_RESULT
      RESULT RESULT     = LS_RESULT
             PAPERWORK = LT_PAPERWORK.
    CATCH CX_ROOT INTO ROOT_EXCEPTION.
      CALL METHOD ROOT_EXCEPTION->IF_MESSAGE~GET_TEXT
        RECEIVING
          RESULT = LV_MESSAGE.
ENDTRY.

Upon further inspection and testing with a simple file and program, I can see that the XML structure isn't quite correct for the loop process. There needs to be a single <PAPERWORK> node, instead of one for each table line in the file. This should allow the loop to execute properly after a slight adjustment to the XSLT template.

End Routine ABAP to read from Internal table and do calculation.

Hi All...
I have completed some coding in a start routine to extract some fields from a DSO containing Master Data (Stock Age) into an internal table (the internal table has been defined in the global declarations area) which will then be read in the end routine.
(the internal table will be read) at loadtime in the end routine and used in a calculation as described below.
I.E
GLOBAL DATA DECLARATION
Data: ITAB1 TYPE TABLE OF /BIC/DSOTAB
(DSOTAB has 3 fields PLANT, STYLE, 1STDATE (1STDATE IS A DATE FIELD)
The start routine has the following code:
IF ITAB1 IS INITIAL.
SELECT /BIC/PLANT /BIC/STYLE /BIC/1STDATE
                FROM /BIC/DSOTAB
                INTO CORRESPONDING FIELDS OF TABLE ITAB1.
This is working fine when run under simulation i.e ITAB1 is filled no problem.
I then need to do a calculation in the end routine.
1. First I have to find the record in the internal table using the key of PLANT AND STYLE from the RESULT_PACKAGE.
The code i am using now is as follows....
    READ TABLE ITAB1 TRANSPORTING NO FIELDS WITH KEY
    /BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
    <result_fields>-/BIC/STYLE.
Once this record has been read I then have to perform the following calculation using the following additional fields
<result_fields>-/BIC/DYS1ST is a NUMC field in the <result_fields> that will be be filled by the result of the calculation described below.
<result_fields>-CALDAY is a date field which is already populated in the <result-fields> which is used in the calculation below.
The Calculation required is a difference in days between two dates
DYS1ST = CALDAY - 1STRED.
The code i am using is
If sy-subrc = 0.
     <result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
     i_t_1stred_dso-/BIC/1STRED.
So the whole section of code inside the LOOP at RESULT PACKAGE looks like this in the end routine
       READ TABLE ITAB1 TRANSPORTING NO FIELDS WITH KEY
    /BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
    <result_fields>-/BIC/STYLE.
IF sy-subrc = 0.
     <result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
     i_t_1stred_dso-/BIC/1STRED.
Im getting the error
"ITAB1 " is a table without a header line and therefore has no component called "/BIC/1STRED
Please can someone advise as to what I need to do to get this fixed please.
Thanks in advance
Stevo:)

Hi,
You will have to do few changes in your code as below,
GLOBAL DATA DECLARATION
Data: ITAB1 TYPE standard TABLE OF /BIC/DSOTAB.
After that declare a workarea to read the values.
DATA: i_wa_itab1 type /bic/dsotab.
(DSOTAB has 3 fields PLANT, STYLE, 1STDATE (1STDATE IS A DATE FIELD)
The start routine has the following code:
IF ITAB1 IS INITIAL.
SELECT /BIC/PLANT /BIC/STYLE /BIC/1STDATE
FROM /BIC/DSOTAB
INTO CORRESPONDING FIELDS OF TABLE ITAB1.
This is working fine when run under simulation i.e ITAB1 is filled no problem.
I then need to do a calculation in the end routine.
1. First I have to find the record in the internal table using the key of PLANT AND STYLE from the RESULT_PACKAGE.
The code i am using now is as follows....
READ TABLE ITAB1 TRANSPORTING NO FIELDS WITH KEY
/BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
<result_fields>-/BIC/STYLE.
Once this record has been read I then have to perform the following calculation using the following additional fields
<result_fields>-/BIC/DYS1ST is a NUMC field in the <result_fields> that will be be filled by the result of the calculation described below.
<result_fields>-CALDAY is a date field which is already populated in the <result-fields> which is used in the calculation below.
The Calculation required is a difference in days between two dates
DYS1ST = CALDAY - 1STRED.
The code i am using is
If sy-subrc = 0.
<result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
i_t_1stred_dso-/BIC/1STRED.
So the whole section of code inside the LOOP at RESULT PACKAGE looks like this in the end routine
READ TABLE ITAB1 into i_wa_itab1 WITH KEY
/BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
<result_fields>-/BIC/STYLE.
IF sy-subrc = 0.
<result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
i_wa_itab1-/BIC/1STRED.
Once you do this changes, your code will work fine.
Regards,
Durgesh.

Display 2 different structured internal tables in single screen using ALV

Hi,
I have two internal tables. Both has different structures. My requirement is to display both the internal tables in single screen using ALV Grid but NOT using OO ALV Grid display.
Is there any way of spliting the Final ALV display screen into two with two different headers and details as shown below.
Header1 for internal table 1
Data of internal table 1
Header1 for internal table 2
Data of internal table 2
Can anyone suggest a better way to display this.
Regards,
Senthil

hi
first think i can say ALV GRID means only for OO ALV it is not possible to display two I.T. data in singr report screen.
better to use of the fm: REUSE_ALV_BLOCK_LIST_DISPLAY
so that u can display both I.T. data in separate report list under single screen
Check the example programs:
BALVBT01 Testprogram ALV: Block list
BCALV_TEST_BLOCK_LIST Program BCALV_TEST_BLOCK_LIST
Regards,
deepak

ABAP debugging : excel to internal table

Hi ,
I would like to know if there is any way to copy excel sheet data into internal table during Debugging? Any pointers to this are highly appreciated.
Thank you in Advance.
Sravan.

Here is one technique if you have Basis 640 or higher - you can use the advanced debugger (New ABAP Debugger). I have done this many times.
1) Select the tables tab when you are at a place in the code where you wnat to change the internal table
2) Use a single table versus the split screen within the tables tab to maximize fields on the screen
3) Select the tools for the service (wrench) on the right side of the screen - pop up window will appear and select 'Change row content'. Note there is a change column but I have not tried that to see if the entire table column changed or if only the visible rows column changed.
4) Align excel fields in the same order as the internal table fields and copy the data
5) Place cursor in the first position of the starting field and paste
This can only be done for the rows that are visible on the screen so you will need to page down to continue to paste. Perhaps since you work for SAP you can suggest a better way to paste in an internal table. Also there is a limitation with the number of records that can be displayed/changed in the advanced debugger.
Andy

Pass structure, internal table from workitem to BSP

Hi All,
I have a requirement where a BSP application is to be called from the workitem.
How can i pass a structure or an internal table from the workitem to the BSP application?

In the BSP application mark the check box AUTO on the PAGE ATTRIBUTES tab and this makes the value available in the displayed URL of the BSP application.
the documention mentation provided by SAP regarding this option is
A page attribute marked as automatic is automatically supplied with a value from the calling URL or the navigation from another page. However there must exist a parameter of the same name with value in the URL or navigation interface.
here your navigation interface is WF_EXTSRV that you have already defined make the parameter as Exporting and when you get the URL read the URL and by using the OFFSET concept you can read the value of the element that you want in the BSP application

HR abap : how to declare internal table to fetch data from 0585 infotype

Hi all ,
I am able to fetch the data from pa0585 infotype for set of employee no , but the problem is as the fields in pa0585 (like Contr to ULIP , NSC , Medical Treatment,Contribution to Certain Pension Funds so on ..) will be changed dynamically and will be displayed based on the amount value in descending order iam not able to store the values of the fileds into internal table . I dont understand how to declare the internal table ..Please help in if u have solved this kind of problem.
I shld get the output in this way ...
Emp No     Name    Medical treatment       Contr to ULIP             ....... so on
101          abc           10000                        150000                      .......so on
102          xyz           12000                        150000                      .......so on
My header shld be fixed and I shld display values in this way .... I can use write statement to display directly .
Thanks ....

Hi
Decalre INFOTYPE
Goto SE37 - Find FM -
READINFOTYPE*

Export - Import In ABAP ( for variables and internal table)

how can we pass value for the variable and internal table using Export and Import?
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
data: var type sy-uzeit.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var,sy-subrc,sy-uzeit.
i found var value 0 while importing.
what is the right syntax for passing value of variable and internaltable.
regards,
dushyant.

Hi,
There are two possible solutions.
Solution1:
Program1.Should be run before atleast once so that TIME should be filled.
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
Program2.IF the TIME is filled,then only it will produce the result.
data: var type sy-uzeit.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Solution2:
Single program:
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Kindly reward points by clikcing the star on the left of reply,if it helps.

How Can I perform the external abap programe transmit the internal table in

Hi,all
In Sapscript,I want calculate a internal table and return the changed table to Sapscript
I know used the transmit result variable for example:
/:PERFORM GET_MAKTX IN PROGRAM ZXX
/:USING &MATNR&
/:CHANGING &MAKTX&
/:ENDPERFORM.
How can I set Using with a table?
Thanks
Sun

Hi,
As per my knowledge it is not possible to pass the entire table at a time using PERFORM in PROGRAM ,,, USING and CHANGING.
Solutions:
1) If possible do the same thing in the Print Program:
    using CONTROL_FORM call element and print in the script
2) if you know the all table entries.: Pass all records at time:
Ex: PERFORM Pxxxx in PROGRAM PROGXXXX
      USING <MATNR1>
                <MATNR2>
                <MATNR3>..............
      CHANGING < MAKTX1>
                        <MAKTX2>
                         <MAKTX3>............
ENDPERFORM

Using abap code data from internal table to XML file create

Hi ALL,
i am using methods
L_VALUE = GS_DOCUMENT-U_MITARBEITER.
L_RC = L_ELEMENT_FLIGHTS->SET_ATTRIBUTE( NAME = 'U_Mitarbeiter' VALUE = L_VALUE ).
CLEAR: L_VALUE,
         L_RC.
L_VALUE = GS_DOCUMENT-VORNAME .
L_RC = L_ELEMENT_FLIGHTS->SET_ATTRIBUTE( NAME = 'Vorname' VALUE = L_VALUE ).
     ENDLOOP.
LOOP AT GS_DOCUMENT-GI_TIMETABLE INTO GS_TIMETABLE.
    L_ELEMENT_AIRLINE = L_DOCUMENT->CREATE_SIMPLE_ELEMENT(
        NAME = 'Timetable'
        PARENT = L_ELEMENT_FLIGHTS ).
      Create attribute 'code' of node 'airline'
    L_VALUE = GS_TIMETABLE-BEGINNUHRZEIT.
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Beginnuhrzeit' VALUE = L_VALUE ).
    L_VALUE = GS_TIMETABLE-BEMERKUNGEN.
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Bemerkungen' VALUE = L_VALUE ).
    L_VALUE = GS_TIMETABLE-ENDEUHRZEIT .
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Endeuhrzeit' VALUE = L_VALUE ).
    L_VALUE = GS_TIMETABLE-BUCHUNGSDATUM.
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Buchungsdatum' VALUE = L_VALUE ).
ENDLOOP.
Creating a stream factory
L_STREAMFACTORY = L_IXML->CREATE_STREAM_FACTORY( ).
Connect internal XML table to stream factory
L_OSTREAM = L_STREAMFACTORY->CREATE_OSTREAM_ITABLE( TABLE = L_XML_TABLE ).
Rendering the document
L_RENDERER = L_IXML->CREATE_RENDERER( OSTREAM = L_OSTREAM
                                        DOCUMENT = L_DOCUMENT ).
L_RC = L_RENDERER->RENDER( ).
Saving the XML document
L_XML_SIZE = L_OSTREAM->GET_NUM_WRITTEN_RAW( ).
i am geting the output,
line1
<?xml version="1.0"?><Head Document="002_TMA1_KW1_SAP.XML" Innenauftragsnummer="008004000800" Kalenderwoche="17" MonatJahr="04/2008" Name="" Personalnummer="91003139" Projektnummer="1400000700" Regionalstelle="B" U_Entleiher="1" U_Mitarbeiter="1" Vorname=
line 2
Ricky"><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="21.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="22.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrz
line 3
it="16:30" Buchungsdatum="23.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="24.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="25.04.2008"/></Head>
but i want this type line by line
<?xml version="1.0" encoding="ISO-8859-1"?>
<Document Dokumentnummer="001_TMA7_KW2_MAN" Dokumenttyp="TN_HE" Innenauftragsnummer="8004750104" Kalenderwoche="15" MonatJahr="04/2008" Name="Banana" Personalnummer="166326" Projektnummer="1400000203" Regionalstelle="RV1" U_Entleiher="1" U_Mitarbeiter="1" Vorname="Sepp">
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="07.04.2008" Endeuhrzeit="16:00"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="08.04.2008" Endeuhrzeit="16:00"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="09.04.2008" Endeuhrzeit="16:30"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="10.04.2008" Endeuhrzeit="16:30"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="11.04.2008" Endeuhrzeit=""/>
</Document>
for line breaking, please give me solution
Regards,
Santha

Hi,
Please give me more inforamtion, how to use this
CLASS cl_abap_char_utilities DEFINITION LOAD.
cl_abap_char_utilities=>newline
Regards,
Santha

ABAP Client proxies: structure/internal table error

Similar Messages

Maybe you are looking for