ABAP consuming Web Service in HTTPS keeps prompting for credentials

I have a Share Point Web Service that I want
to call in HTTPS from ABAP
in an ECC 6.0 SAP_BASIS 700 SP 30 system. The
following steps have been
executed:
BASIS work completed –
SAPCRYPTOLIB, HTTPS Activation, profile
parameters, STRUST certificates
I have created the Client Proxy in SE80 for the SharePoint WCF Web Service
The Logical Port was created in SOAMANAGER
The issue I have is when I test the process using SE80 sometimes it will prompt
for credentials, sometimes it won't. The behavior is very sporadic, I
can run it once and it prompts then the second time it doesn't. This is
especially true after a restart of the system. The user and password
are on the RFC destination under consumer security tab.
Any suggestions why the prompting for
credentials?
Regards
Diane Szmurlo

Hi Sekhar,
Please see below link. It will be helpful.
Regards,
Sudha

Similar Messages

Outlook 2010 keeps prompting for credentials

Hello,
I have just about every user experiencing an issue with Outlook 2010 where Outlook keeps prompting for credentials. This has been happening ever since recent Microsoft Office updates that rolled out last week it seems. All my users still have connection
to the exchange server and can send/reply just fine. Issue occurs on both 32 bit and 64bit versions. This prompt will appear every few seconds and is becoming a nuisance for all my users.
I have attempted the following with no resolution:
- removed credentials from credentials manager
- ran Outlook in safe mode
- ran repairs on Office
- completely removed and re-added users Outlook profile (profiles are manually configured)
- made sure Office is up to date
- configured Outlook account on freshly imaged PC

Hi,
For this issue, you can first try some suggestions in this forum content:
Why does Outlook keep prompting for password
Especially try NTLM Authentication to check the result.
We have received some report about this issue since the February 10, 2015 update for Outlook 2010 (KB2956128). If you have installed this update, please note we have realized this issue and once there is any update, I'll let you know.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Exhcnage 2013 Migration - User keep keeping prompted for credentials

Hello,
I am migrating all on-premise exchange 2010 SP3 to Exchange 2013 SP1. I am testing mailbox migrations, each mailbox that gets moved to 2013 the user keeps getting prompted for credentials. I have read several posts in the forums yet none which solve my problem.
Can someone point me in the right direction. All 2013 setting are currently at default.

Thank you for your help and your quick response.
Here is the autodiscover test. When I move the mailbox to 2013 its picks up the 2013 URL. In this output mail.myserver.com is the hostname of my 2013 cas.
Also noticed the following in the server field under account settings.
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
      <DisplayName>2013test</DisplayName>
      <LegacyDN>/o=mycompany/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=2013test436</LegacyDN>
      <AutoDiscoverSMTPAddress>[email protected]</AutoDiscoverSMTPAddress>
      <DeploymentId>91ce898c-65a0-402e-be70-622d0a31f7c3</DeploymentId>
    </User>
    <Account>
      <AccountType>email</AccountType>
      <Action>settings</Action>
      <MicrosoftOnline>False</MicrosoftOnline>
      <Protocol>
        <Type>EXCH</Type>
        <Server>[email protected]</Server>
        <ServerDN>/o=mycompany/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
        <ServerVersion>73C08391</ServerVersion>
        <MdbDN>/o=mycompany/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
        <PublicFolderServer>mail.myserver.com</PublicFolderServer>
        <AD>nohdomp1.domain.LOCAL</AD>
        <AuthPackage>Anonymous</AuthPackage>
        <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.LOCAL</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.LOCAL</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-sms>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.LOCAL</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=domain.LOCAL</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmCreating>
        <EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmEditing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.LOCAL</EcpUrl-extinstall>
        <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
        <ServerExclusiveConnect>off</ServerExclusiveConnect>
      </Protocol>
      <Protocol>
        <Type>EXPR</Type>
        <Server>mail.myserver.com</Server>
        <SSL>On</SSL>
        <AuthPackage>Negotiate</AuthPackage>
        <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.LOCAL</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.LOCAL</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-sms>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.LOCAL</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=domain.LOCAL</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmCreating>
        <EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmEditing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.LOCAL</EcpUrl-extinstall>
        <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
        <ServerExclusiveConnect>on</ServerExclusiveConnect>
        <EwsPartnerUrl>https://mail.myserver.com/ews/exchange.asmx</EwsPartnerUrl>
        <GroupingInformation>NebraskaOrthopaedicHospital</GroupingInformation>
      </Protocol>
      <Protocol>
        <Type>WEB</Type>
        <Internal>
          <OWAUrl AuthenticationMethod="Basic, Fba">https://mail.myserver.com/owa/</OWAUrl>
          <Protocol>
            <Type>EXCH</Type>
            <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
          </Protocol>
        </Internal>
        <External>
          <OWAUrl AuthenticationMethod="Fba">https://mail.myserver.com/owa/</OWAUrl>
          <Protocol>
            <Type>EXPR</Type>
            <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
          </Protocol>
        </External>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>mail.myserver.com</Server>
        <SSL>On</SSL>
        <AuthPackage>Ntlm</AuthPackage>
        <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.LOCAL</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.LOCAL</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-sms>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.LOCAL</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=domain.LOCAL</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmCreating>
        <EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmEditing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.LOCAL</EcpUrl-extinstall>
        <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>mail.myserver.com</Server>
        <SSL>On</SSL>
        <AuthPackage>Negotiate</AuthPackage>
        <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.LOCAL</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.LOCAL</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.LOCAL</EcpUrl-sms>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.LOCAL</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=domain.LOCAL</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmCreating>
        <EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=domain.LOCAL</EcpUrl-tmEditing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.LOCAL</EcpUrl-extinstall>
        <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
      </Protocol>
    </Account>
</Response>
</Autodiscover>

WAS ABAP - Keep prompting for credentials

Hi All,
We have couple WD ABAP applications deployed and running in our ECC backend. These are integrated in our Portal environment as well.
At times, whenever user click on WD ABAP applications it keep prompting the user to enter ECC credentials. Pls check this [screenshot|http://wiki.sdn.sap.com/wiki/download/attachments/113246549/WAS-ABAPpromptingforuserid.JPG].
Ideally, this dialog box shouldn't be prompt to the user, instead load the application start page. Our SSO with ECC & Portal works fine.
But, for certain users it keep asking to enter the credentials for the first time and if the user enters it - dialog window vanishes and takes to the start page.
Please share any pointers regarding the same.
Regards,
Anil Kumar

Hi Anil,
We had the same issue.
In our case the issue was related to IE configuration of pop-up blocker settings and cookies settings -> Internet options, privacy tab, Sites button and settings button. When you allow your site cookies and allow pop-up sites, the IE wouldn't be asking for credentials, but it will give you time-out screens. If necessary try increasing the timeout.
Hope this helps you.
Best regards,
Martina

Report that uses web services as data source, prompts for database logon

I have a crystal report that uses web services as a data source. When I deploy the report to Infoview it prompts me for a database username and password. Since I am not using a database it should not prompt me for these. I tried various options in the CMC->database settings for this report but it still prompts me for the database logon info or tells me that the database logon information is incorrect.
The report work fine in the Crystal Reports Designer.
Does anyone know how I can prevent this report from prompting me for the database logon info ?
Thanks,

What options have you tried in the CMC?
Have you tried running the report in Crystal Reports installed directly on the Enterprise machine?

Outlook 2007 keeps prompting for credentials

I've seen so many articles on this and it still plagues me. I've had enough.
I am in a pure Exchange 2007 environment.
SCC Mailbox Server
Hub & CAS are on a different Server but together.
Outlook 2007 is installed on my workstation.
I setup a profile using the auto-discover process (default) and I am prompted for a passwrod to my hub and CAS? I enter in the CORRECT credentials and I am prompted again. Remembering months ago that I was unable (or unwilling) to resolve this annoyance I hit cancel and chose to set it up manually. this worked using the Exchange Clustered Mailbox name.
As soon as the profile is setup and I am into Outlook I'm prompted again! wow, what is this? I enter in the CORRECT credentials AGAIN and i am repeatedly prompted. after hitting cancel 30 times i continue on with my work.
..but then I close and re-open Outlook, same process all over again. the Windows prompt is prompting me for creds on domain.com (my domain) what is going on here. i have not even had a chance to configure (break) anything....is this default behaviour for exchange 2007/Outlook 2007? I know I am missing something here but I just can't seem to get around this.
I have tried most MS KB articles out there (can't find the links to provide)
Yes, I'm on the Domain
Yes, I have decided to set it up manually and chose not to use Auto-discover, which to me at this point is a terrible feature.
Yes, my bottom right corner of Outlook 2007 says "Online with Microsoft Exchange"
Outlook 2003 clients do not have this problem which tells me this is something in Outlook. I can uninstall Outlook 2007 and replace it with Outlook 2003, same workstation, same user logged in with no problems.
Whats going on here?
thanks

i solve this problem with this
Kernel authentication Mode
If you have all the above configured and you are still experiencing problems then the following procedure will more than likely fix it for you. It has been working a lot for me lately and also for people asking questions on Experts
Exchange.
In Internet Information Services (IIS) Manager locate the Exchange virtual directories, if you are using Small Business Server 2008 these will be under the SBS Web Applications website, if your not using SBS then they will be under
the Default Website.
The virtual Directories you are looking for are:
Autodiscover
EWS
RPC
OAB
In turn highlight each of these virtual directories and double click the Authentication icon on the right hand side. Right click on Windows Authentication and select Advanced Settings. Place a check box in the box for Enable kernel-mode
authentication. Do this for each virtual directory listed above.
http://demazter.wordpress.com/2010/02/09/outlook-continually-prompting-for-username-and-password-2/

How to Consume Web Service?

Hi Experts,
I need to call a Function Module in the Exit.
In this Function Create to write the code to consume web service created by third party.
Then get the Data from there and uodate SAP
Can u plz help me with the Steps Involved in this?

Hi Mohsin,
Please chk this link once for consuming web services..
http://help.sap.com/saphelp_nw70/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/b4/6aae409567942ae10000000a155106/content.htm.
U shuld have authorizations for tcodes WSADMIN and SOAMANAGER for creating web services
Hope it will be useful..
Regards,
Lakshman.
Edited by: Lakshman N on Jan 13, 2009 12:06 PM

Why does Outlook keep prompting for password

We have seen our community members ask questions about Outlook keeps prompting for credentials many times. This issue could be caused by numerous reasons. Below is a list of the most common reasons for this problem:
Outlook is configured to prompt you for credentials
Incorrect password cached in credential storage
Required Authentication Settings for outgoing server and incoming server
Outlook Anywhere is not configured to use NTLM Authentication
Corrupt Outlook profile
Slow or unstable network connection
Antivirus programs
Shared calendars
Outlook is configured to prompt you for credentials
If you are using an Exchange account, there is a setting in your Outlook profile to always prompt for logon credentials. To find the setting, please follow:
1. In Outlook 213, go to File tab > Info >
Account Settings > Account Settings…
2. Highlight your Exchange account and click Change button.
3. Click on More Settings button.
4. Select the Security tab.
5. Under the User Identification, make sure the “Always prompt for logon credentials” option is not selected.
If you are using other types of email, please make sure you have ticked the option “Remember password”.
Incorrect credential cached in Credential Manager
Your Windows system stores user credentials on your computer. If the cached credentials are incorrect, you will be prompted for password. This issue usually happens after the password for your domain user account is changed. Before your password changed,
you saved your credentials. The stored credentials are not overwritten when Outlook triggers the authentication prompt even if you enable the Remember my credentials option.
To fix this issue, you need to remove the corrupted credentials, follow these steps:
Click Start, click Control Panel, and then click Credential Manager.
Note If View by is set to Category, click User Accounts first, and then click Credential Manager.
Locate the set of credentials that has Outlook in the name.
Click the name to expand the set of credentials, and then click Remove from Vault.
Repeat step 3 for any additional sets of credentials that have the word Outlook in the name.
Required Authentication Settings for outgoing server and incoming server
Different email provider may need different authentication settings. Please make sure you have set the server settings correctly. You can contact your email provider to gather the information.
In general, we select the “My outgoing server (SMTP) requires authentication” option and the first bullet “Use same settings as my incoming mail server”.
In addition, click on the Advanced tab and check if you have enter the correct Server Port Number and select the correct encrypt type. Below is a screenshot for an IMAP account:
Outlook Anywhere is not configured to use NTLM Authentication
The Outlook Anywhere feature allows you to access your Exchange account remotely from the Internet when you are working outside your organization's firewall.
When using Outlook Anywhere to connect to your Exchange server, we need to choose
the authentication method among Basic Authentication, NTLM Authentication and Negotiate Authentication. The difference among them is the way that the passwords are sent when connecting to the server. With Basic Authentication,
the password is sent in clear text. Using NTLM Authenticationcan significantly reduce the number of password prompts.
To check the authentication setting, please go to File > Account Settings > Account Settings,
select the Exchange account, and then click
Change. In the Change Account wizard, click
More Settings, and then click the Connection tab. Click the Exchange Proxy Settings button and now, you can see the settings under
Proxy authentication settings. Try to change the authentication to
NTLM Authentication and then check the issue again.
Slow or unstable network connection
If your network connection is slow or unstable, Outlook may lose connection to the mail server. When Outlook try to reconnect, it will prompt for the credentials. To verify this, please switch to a stable network environment and then check if this issue
persists.
Corrupt Outlook Profile
Corrupt profile may cause Outlook to no longer remember your password. Please try to create a new mail profile in Control Panel and reconfigure your email account in the new profile to fix the issue. To create a new mail profile, you can refer:
http://support.microsoft.com/kb/829918
Antivirus software
Antivirus software usually integrates into your Outlook and it may cause some conflicts. Try to temporarily turn off your antivirus software to check if the issue will be gone.
Shared Calendar
Shared calendars can impact the user credentials, this issue may also occur if you have shared calendars opened in Outlook. You can try to unselect the shared calendar to check the result. It’s recommended to not open the shared calendar unless you want
to view them.
If you have any comments, welcome to post in the forum. Thank you.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Nope...
I went through point by point by point, top to bottom, checking and verifying every single item as a possible cause for why my system (Outlook 2013 running on Windows 8.1 and connecting to Exchange 2010) insists on prompting me for my password every single
time I start Outlook. None of the solutions worked, my system still prompts me. I don't even have to supply a password. When the prompt dialog appears, I just cancel it. Within a few seconds, the bottom Outlook status bar changes to
"Need Password" with a key icon to the left. Then I just click on that message and immediately Outlook connects to Exchange.
The freaking software is BROKEN! Period.

Office 2007 Documents Keep asking for credentials

Hi All Gurus - Is there any issue with SP 2013 and Office 2007? We are trying to access office documents using IE 11, it prompts for credentials first time after compture reboot. Once given credentials it works fine whole day. but users who reboot there
computer have to provide credentials next day. It's not with the PDF documents. Also, we have set proper Alternate Access Mapping and FQDN for the site. Also, the intranet site has been added to the trusted site. Also, tried with the Local Intranet Zone setting
"Automatic logon with current username and password".
Users with the IE 10/11 and Office 2010 have no issues.
Could anybody please guide me on this?
Regards,
Khushi

try these links:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
http://www.mysharepointadventures.com/2012/02/sharepoint-keeps-prompting-for-credentials/
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_27955868.html
http://stackoverflow.com/questions/375390/office-documents-prompt-for-login-in-anonymous-sharepoint-site
also you can try to disableloopbackcheck as below link:
http://blogs.technet.com/b/sharepoint_foxhole/archive/2010/06/21/disableloopbackcheck-lets-do-it-the-right-way.aspx
http://www.jeremytaylor.net/2010/05/24/sharepoint-disable-loopback-check-disableloopbackcheck-dword-in-registry/
also try tocheck if compatibility issues is present between sharepoint 2013 and office2007 docs.
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Windows authentification while consuming web service from ABAP

Hi All,
We are consuming web service from ABAP, we have created client proxy in SE80 and configured logical port in LPCONFIG.
This one was working fine. Now we have added windows user authentification to access this service.
Now when I'm trying to regenerate this proxy in R/3 it is asking for user and password. When I enter these details this one is not working.
If I access this service direcly from internet explorer and I enter same user and password then I would able to access this service.
Could you please let me know how to handle this.
Regards
Vikram

The dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications. There is no prompt produced when running in Web Dynpro. If possible assign a generic user within the logical port definition and this will be used automatically by all users.

Consume web service in ABAP proxy with SOAP header

Hi Thomas ,
I am trying to consume web service in ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
Please see below code and please give some direction to fix the issue.
1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
2.Create Logical port
3.Create following program to call proxy
REPORT zproxy.
DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
      ws_header TYPE REF TO if_wsprotocol_ws_header,
      name TYPE string,
      namespace TYPE string.
TRY.
    CREATE OBJECT ref_stock
get WS_HEADER protocol
    ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
set somehow header as iXML-DOM tree
    DATA: ixml TYPE REF TO if_ixml,
          xml_document TYPE REF TO if_ixml_document,
          xml_root TYPE REF TO if_ixml_element,
          xml_element TYPE REF TO if_ixml_element,
          xml_node TYPE REF TO if_ixml_node.
    DATA l_xstring        TYPE xstring.
    DATA l_string         TYPE string.
    FIELD-SYMBOLS <fs_xstring> TYPE xstring.
Additional Header:
    CONCATENATE
'<soap:Header>'
'<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
'<s1:RegisteredUser>'
'<s1:UserID>[email protected]</s1:UserID>'
'<s1:Password>aaaaaaaa</s1:Password>'
'</s1:RegisteredUser></s1:LicenseInfo>'
'</soap:Header>' INTO l_string.
convert to xstring
    l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
    IF NOT l_string IS INITIAL.
    create iXML DOM document from XML xstring
      CALL FUNCTION 'SDIXML_XML_TO_DOM'
        EXPORTING
          xml           = l_xstring
        IMPORTING
          document      = xml_document
        EXCEPTIONS
          invalid_input = 1
          OTHERS        = 2.
      IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
        xml_root = xml_document->get_root_element( ).
        xml_element ?= xml_root->get_first_child( ).
      add header element by element to SOAP header
        WHILE NOT xml_element IS INITIAL.
          name = xml_element->get_name( ).
          namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
          IF NOT xml_element IS INITIAL.
          ENDIF.
          ws_header->set_request_header(
                      name = name
                      namespace = namespace
                      dom = xml_element ).
          xml_element ?= xml_element->get_next( ).
        ENDWHILE.
      ENDIF.
    ENDIF.
CATCH cx_ai_system_fault .
ENDTRY.
*Call soap body using abap proxy class.
DATA: get_quotes TYPE zzget_quotes_soap_out .
DATA: get_quotes1 TYPE zzget_quotes_soap_in .
get_quotes1-quote_ticker = 'GE'.
TRY.
    CALL METHOD ref_stock->get_stock_quotes
      EXPORTING
        get_quotes1 = get_quotes1
      IMPORTING
        get_quotes = get_quotes.
CATCH cx_ai_system_fault .
CATCH cx_ai_application_fault .
ENDTRY.
4.It is throwing cx_ai_system_fault error.
SOAP details:
Input:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
<soap:Header>
<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
<s1:RegisteredUser>
<s1:UserID>[email protected]</s1:UserID>
<s1:Password>aaaaaaaa</s1:Password>
</s1:RegisteredUser>
</s1:LicenseInfo>
</soap:Header>
<soap:Body>
<tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
<tns:QuoteTicker>GE</tns:QuoteTicker>
</tns:GetQuotes>
</soap:Body>
</soap:Envelope>
Thanks,
Kavitha.

Hi ,
Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
<a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
Thanks,
Kavitha.

Code for consuming web services in ABAP

*& Report ZVM_GET_CITY_TIME
REPORT zvm_get_city_time.
PARAMETERS:
p_city TYPE zget_city_time_soap_in-city.
DATA:
cl_proxy TYPE REF TO zco_time_service_soap,
input    TYPE zget_city_time_soap_in,
output   TYPE zget_city_time_soap_out,
systerr TYPE REF TO cx_ai_system_fault,
w_error TYPE c.
TRY.
    CREATE OBJECT cl_proxy
      EXPORTING
        logical_port_name = 'ZCO_TIME_SERVICE_SOAP'.
CATCH cx_ai_system_fault.
    CREATE OBJECT systerr.
    WRITE:/ 'Error in creating object - ', systerr->errortext.
ENDTRY.
TRY.
    input-city = p_city.
    CALL METHOD cl_proxy->get_city_time
      EXPORTING
        input = input
      IMPORTING
        output = output.
CATCH cx_ai_system_fault.
    CREATE OBJECT systerr.
    WRITE:/ 'Error in calling the method - ', systerr->errortext.
    w_error = 'X'.
ENDTRY.
CHECK w_error NE 'X'.
SKIP.
WRITE:/ 'The current time in ', p_city, ' is ',
        output-get_city_time_result.

<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja

How to consume Web Services form ABAP ?

Hi,
Please advise how to consume web services from ABAP Code ? is there any automatic generating proxy class in order to consume web services ?
I am using NW 7.0 SP15
Thank You and Best Regards
Fernand Lesmana

Hi Fernand,
chk out for this link
Consume an ABAP Webservice (WAS 620) from .Net
Send SMS to India from ABAP
working web service from ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a4433436-0301-0010-f2a9-9281ad574054
Regards
Sampath

How to consume WEB SERVICES from ABAP ??

Q: How to consume WEB SERVICES from ABAP program??
     the point here is i am using SAP release 620 and the creation of proxy is out of scenario
     and also no XI.    Its only through ABAP program i need to consume one web service (its a HTTPS one ),
    Using cl_http_client... i tried it but i am totally confused of whats happening ???
Req some senior ppl advice on the same/approach.
any hints will suffice my way of approach...!!!
Please do put in your valuable advices..!!
Thanks in advance..!!!!

Hello Srinivas,
Following is the code for calling web service:
data: client type ref to if_http_client,
      host   type string value 'server url',
      service type string value '8080',
      path type string value '/sap/public/ping',
      errortext type string,
      proxy_service type string,
      scheme type i value 1.
call method cl_http_client=>create
exporting host = host
        service = service
     proxy_host = host
   proxy_service = service
   scheme        = scheme
importing client = client
exceptions
    argument_not_found = 1
    internal_error     = 2
    plugin_not_active = 3
    others             = 4.
case sy-subrc.
when 0.
     write 'Server reached successfully'.
when others.
     write: 'sy-subrc =', sy-subrc.
endcase.
Once you got the client object you can call following methods:
"Set the requrie URL for the web service you want to call. This is not WSDL anyway!!
cl_http_utility=>set_request_uri( request = client->request
uri =' url 2 be called ').
*Then you can call send method with proper inputs for sending request to WS
CALL METHOD client->send
Then you can use receive method for getting the response
CALL METHOD client->receive
*You can get last error in case of exceptions
CALL METHOD cl_http_client=>get_last_error
*Close the client object
CALL METHOD client->close
For more information on full code refer my link in previous replay.
Thanks,
Augustin.
Edited by: Augustarian on Aug 18, 2009 1:49 PM

Pros & Cons for consuming web services in ABAP using ABAP PROXY

Hi,
Other then performence is there any other disadvantages like security,etc for consuming web services in ABAP using ABAP proxy?
I really appreciate if some one provide the more details(Pros & Cons ) regarding cosuming web services and I also want to know is there any other way to consume web services in ABAP.
Thanks.

<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja

ABAP consuming Web Service in HTTPS keeps prompting for credentials

Similar Messages

Maybe you are looking for