ABAP: Developed new Report for Summarized JIT (Just In Time) calls
Hi to all,
Can anybody please tell me about the following:
· Developed new Report for Summarized JIT (Just In Time) calls: This report is for Delco Singapore needs all Summarized JIT calls created between selected dates to be closed. If JIT call quantity is 0 and GR quantity is also 0, then GR flag for JIT call to be checked and JIT call will not be shown open. If the JIT call quantity is greater than zero and GR for JIT call quantity is zero then JIT call quantity made as zero and GR flag for JIT Call to be checked. Once it is checked the JIT call will not be shown in Open.
Thanks in advance.
Regards
Monalisa
Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region
You would do all these steps for your advanced search page as well, so that in your main jsp, you can call asfPage.setAdvancedSearchPage() with the attribute name of your advanced page.
What I Still do not know is:
(1) My main page keeps coming up saying that there is no default query defined for it. How do you create a default query for a report?
(2) How to get the personalization to work.
Can anyone help?
Thanks!
Similar Messages
-
Develop new Report for Summarized JIT (Just In Time) calls
Hi to all,
Can anybody kindly tell me how to develop new report for summarized JIT (Just In Time) calls.
Thanks in advance,
Regards
SimiI think it is a good feature, but I'd like to make some suggestions.
1) When the dialog pops up (like your attachment), it would be nice if I could tell it right then that I don't care about that advice. Right now you have to click on the link and then say you don't want the advice in the future. I think it is that extra step that is really annoying. I think, like most people, my instinct is to just close the dialog. Then next time I run LabVIEW I have to deal with it again. After the 5th time dismissing the damn thing I turn it off.
2) It would be nice to have an easy way to turn JIT advice off for a particular session. For example, I'm called on to help get new employees up to speed in LabVIEW. When I sit down at their computer to help design/debug things, I would really like to turn off JIT advice but just for my session. I don't want to change the other persons settings.
3) It would also be nice to be able to turn off JIT advice without going to the options.
So, I guess what I would like is this. When the JIT advice dialog comes up, instead of only having the link to the advice I'd like to see some a button that will turn off this topic in the future, a button that will turn it off for this session of LabVIEW and a button that will turn JIT off for good (with a verification dialog).
So, experience programmers with a new install will just turn it off for good the first time it pops up. Experience programmers on someone else's machine can turn it off without messing up the other persons ini file and I can leave it on when LV8 comes out and just dismiss the old advice quickly as it comes up.
Pat -
Develope new Report for Summarized JIT (Just In Time) calls
Hi to all,
Can anybody kindly tell me how to solve the following:
This report is for Delco Singapore needs all Summarized JIT calls created between selected dates to be closed. If JIT call quantity is 0 and GR quantity is also 0, then GR flag for JIT call to be checked and JIT call will not be shown open. If the JIT call quantity is greater than zero and GR for JIT call quantity is zero then JIT call quantity made as zero and GR flag for JIT Call to be checked. Once it is checked the JIT call will not be shown in Open.
Thanks in advance
Regards
SimiI think it is a good feature, but I'd like to make some suggestions.
1) When the dialog pops up (like your attachment), it would be nice if I could tell it right then that I don't care about that advice. Right now you have to click on the link and then say you don't want the advice in the future. I think it is that extra step that is really annoying. I think, like most people, my instinct is to just close the dialog. Then next time I run LabVIEW I have to deal with it again. After the 5th time dismissing the damn thing I turn it off.
2) It would be nice to have an easy way to turn JIT advice off for a particular session. For example, I'm called on to help get new employees up to speed in LabVIEW. When I sit down at their computer to help design/debug things, I would really like to turn off JIT advice but just for my session. I don't want to change the other persons settings.
3) It would also be nice to be able to turn off JIT advice without going to the options.
So, I guess what I would like is this. When the JIT advice dialog comes up, instead of only having the link to the advice I'd like to see some a button that will turn off this topic in the future, a button that will turn it off for this session of LabVIEW and a button that will turn JIT off for good (with a verification dialog).
So, experience programmers with a new install will just turn it off for good the first time it pops up. Experience programmers on someone else's machine can turn it off without messing up the other persons ini file and I can leave it on when LV8 comes out and just dismiss the old advice quickly as it comes up.
Pat -
What table and fileds we have to use to develop a report for blocked
what table and fileds we have to use to develop a report for blocked invoices?
VBRK-RFBSK
<b> Error in Accounting Interface
A Billing document blocked for forwarding to FI
B Posting document not created (account determ.error)
C Posting document has been created
D Billing document is not relevant for accounting
E Billing Document Canceled
F Posting document not created (pricing error)
G Posting document not created (export data missing)
H Posted via invoice list
I Posted via invoice list (account determination error)
K Accounting document not created (no authorization)
L Billing doc. blocked for transfer to manager (only IS-OIL)
M Analyst Approval refused (only IS-OIL)
N No posting document due to fund management (only IS-PS)</b>
Regards
prabhu -
How to develop a report for display unused materials
how to develop a report for display unused materials? where can i find them?
Hi Phani,
I didnt get what u acually mean by unsued material. These are some sample materail types which u can find in table 'Mara' field 'Mtart'.
ABF Waste
AEM Samples
BLG BLG Empties External
BLGA BLGAEmpties Fixed assets
CH00 CH Contract Handling
COMP Prod. alloc., purchased
CONT KANBAN Container
COUP Coupons
DIEN Service
DOCU documentary batch
ERSA Spare parts
FERT Finished product(fert)
FGTR Drinks
FHMI Prod. resources/tools
FOOD Foods (excl. perishables)
FRIP Perishables
GR01 material type 01
GR02 material type 02
HALB Semi-finished product
HAWA Trading goods
HERS Manufacturer parts
HIBE Operating supplies
IBAU Maintenance assembly
INTR Intra material
KMAT Configurable material
LEER Empties
LEIH Returnable packaging
LGUT Empties (retail)
MODE Apparel (seasonal)
NLAG Non-stock material
NOF1 Nonfoods
PIPE Pipeline material
PLAN Trading goods (planned)
etc.
ex:
select * from mara where mtart = 'ABF'.
Regards,
Kiran B -
How can i develope a report for getting purchase requisition details
how can i develope a report for getting purchase requisition details like mrp controller release date unit of measure
Hi,
Go to Tcode ME53(Purchase requisition display). Give any preq number and click the item overview button..
in the next page click select one item and press item details button(or F2 button)..In the next page all your requiresd fields will be there.. put cursor in reqd field and press f1.. in the pop up box press techical details(hammer button) to get the field name as well as the transparent table.. Use those fields and table in ur program..
hope it helps
Award points if it helps -
Developed a report for the daily production done.
hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report for the daily production done.
thanks in advance,
radhakrishnaHi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh -
Software Update doesn't have any new software for your computer at this time
HI
I manged to get all my updates downlaoded and on my server, i have currently enabled 133 of 400 updates.
I have changed my snow leopard machine to point to the internal update server
But then after a while of checking this displays software Update doesn't have any new software for your computer at this time
Which is a Lie, because i know there are updates on the server that the computer needs to have.
Any Ideas
Many ThanksOh i forgot to say in consol (from the client) i get can't instantiate distribution from server address error Domain=NSXMLParserErrorDomain code=70 etc
Any ideas anyone? -
Requirement to develop New report to display material self life details
Hi,
I have a requiement to develop a report to find material Expiry date susing total self life:
My selection screen:
warehouse number
storage location
storage type
material
material type
total shelf life
My list should display the material number, description,material type, material group, storage unit, total stock, goods receipt date, expiry date.
Please tell me what are the table to be used to fetch these details.
Thanks,Hi,
For your requirement use the below Table,
material number : MARD-MATNR
description : MAKT-MAKTX
material type : MMARA-MATKL
storage unit - MARD-LGORT
Total stock - MARD-LABST
goods receipt date MSEG -DATE
expiry date MSEG - DATE
Regards
Thiru -
Require Help in developing a Report for Gross Margin
Dear Experts,
I need some inputs regarding development of Gross Margin Report for Controlling. If any body could help us in providing some inputs regarding Costing Information from CK13N or give us some contact number so that we will contact them immediately to get our doubts clarified. Please help ASAP.
Regards,
AnuHi jaya ,
whats ur Business requirement ?
Regards
Prabhu -
New report for Cash Position (TC - FF7A)
Hi
I want to draw cash position (FF7A) report in following format:-
1) Receipt
AR Collection
Other
Total Receipt
2) Disbursements
Payroll
Bonus
3) Accounts Payable
Purchase
Freight
Other Exp
I have done the necessary configuration for Cash Management and getting result as per standard report. Can anybody let me know how to draw above report for TC - FF7A. If possible revert in detail
Regards
DDHi,
Please explore custom reporting option because I don't see FF7A/FF7B giving the desired output.
Manish -
SSHR : Build New Report For Submitted SITs in Process 'Pendning Approval'
Dear All ,
Good day ,
I am using Oracle HRMS 11.5.10.2 ,, I want to generate new report that get the data of the submitted SITs which not approved till now 'Pending Approval'
Could any one help what the tables save this data ??
Best RegardsAny Luck?
-
Request for user feedback: Just-In-Time Advice
An ongoing debate within LabVIEW R&D needs some more customer input in order to be resolved.
In LV7.0, we added Just-In-Time Advice dialogs (aka JIT dialogs). Those
are the small dialogs that you see when, for example, you drop a
stacked sequence structure and you are informed about the new flat
sequence structure. See the attached image for an example. We
were terrified of introducing something always in your face and getting
a response like Microsoft's Clippy, but we wanted a way to tell
customers, particularly upgrade customers, about things that had
changed and improved ways of using old features. The advice dialogs
really aren't targeted at new users, since for them, everything is new.
We need to know if we succeeded and whether or not the design of those
diialogs should be changed. Only a few customers have ever given
feedback about the JIT dialogs. That feedback has been fairly off-hand
such as, "I'm glad that particular dialog was there to help me." But we
really don't have information about whether the dialogs would be more
helpful or less if some of their UI aspects changed. The problem we're
having is that we in LabVIEW R&D wipe our .ini files frequently as
we test new versions, so the JIT dialogs are always popping up. This
makes a lot of developers want to change or remove the JIT dialogs
entirely. So we need a clear picture of whether or not this feature is
helpful to our users.
Please think about times you have seen the JIT dialogs and whether you
were annoyed by them, helped by them, etc, and reply to this message
with your experiences. Separately, I'll post some of the reasons why we
made the JIT dialogs behave the way they do. But I'd first like to hear
some customer feedback with out the biasing, pro or con, that an
explanation might have.
--- Stephen Mercer
-= LabVIEW R&D =-
Attachments:
JIT_Advice_Screenshot.png 12 KBI think it is a good feature, but I'd like to make some suggestions.
1) When the dialog pops up (like your attachment), it would be nice if I could tell it right then that I don't care about that advice. Right now you have to click on the link and then say you don't want the advice in the future. I think it is that extra step that is really annoying. I think, like most people, my instinct is to just close the dialog. Then next time I run LabVIEW I have to deal with it again. After the 5th time dismissing the damn thing I turn it off.
2) It would be nice to have an easy way to turn JIT advice off for a particular session. For example, I'm called on to help get new employees up to speed in LabVIEW. When I sit down at their computer to help design/debug things, I would really like to turn off JIT advice but just for my session. I don't want to change the other persons settings.
3) It would also be nice to be able to turn off JIT advice without going to the options.
So, I guess what I would like is this. When the JIT advice dialog comes up, instead of only having the link to the advice I'd like to see some a button that will turn off this topic in the future, a button that will turn it off for this session of LabVIEW and a button that will turn JIT off for good (with a verification dialog).
So, experience programmers with a new install will just turn it off for good the first time it pops up. Experience programmers on someone else's machine can turn it off without messing up the other persons ini file and I can leave it on when LV8 comes out and just dismiss the old advice quickly as it comes up.
Pat -
Crystal reports for Eclipse (CR4E) - taking long time to load
HI
We have used your Crystal reports for Eclipse (CR4E) but it is taking long time to load if the record count is more than 3 million
Our architecture is we are using Oracle DB and web sphere application server both are running on SUN server,
If we buy original version it will work fast?
Or do you have alternative solution for this, this one to implement one of our major clientYou have 3 million records, this is going to take time to process. Also, you don't define what is meant by a long time. Are we talking a couple of minutes, or something more like 20 minutes?
The real question is, do you really need the report to bring back 3 million records? Could you do any filtering of the data to reduce the number of records being brought back? Also, 3 million records could vary. is each record a single field, or is it multiple. The more fields, the larger the result set.
Another thing you want to look at, is just how long is the query taking to run against the database. -
WCS Lobby Ambassador audit report for a specific period of time
Hi all,
I know there is an WCS audit report for each lobby ambassador activities. But the problem is that I see only activities from Nov 9 to the present. I don't know what the reason is, whether somebody erased that information before Nov 9 or something else happened.
Is there any option to manually configure a specific period of time, for example obtain all activities for last 3 months?
Thanks for any hint.
JozefHi Koti,
What error did you meet when you used audit report from Oct 16 to Oct 31?
Please check the log file to find more information about this issue. The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS. You can check the log file whose modified date is from Oct 16 to Oct 31.
In addition, please deactivate and reactivate Reporting feature at site collection level.
A similar post for your reference:
http://sharepointknowledgebase.blogspot.com/2012/07/unexpected-error-when-trying-to-view.html#.VG2cFouUeog
About audit log report, please take a look at:
https://support.office.com/en-us/article/Configure-audit-settings-for-a-site-collection-a9920c97-38c0-44f2-8bcb-4cf1e2ae22d2?ui=en-US&rs=en-US&ad=US
Best Regards,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
Regarding Web Dynpro Binary Cache
Hi All, I have a Table in my view and I want to export the data in the table in Excel. I have a pdf Exporting Context Data into Excel Using the Web Dynpro Binary Cache It talks about the Sample Application WDExcelExport.zip. I am unable to locate thi
-
How do you use 3 devices on one Router?
Hello< I'm new to the forum and new to networking. My question may seem very basic and it may not, I'm not sure. I will say that I have tried to learn things about routers and networking over the past few days with not much success. Of the 3
-
Rapidly decreasing hard-drive space after upgrading to snow leopard
So... recently upgraded to SL on my just over 1 year old MBP. No problems at first, but now acting really... odd... When I first upgraded I had moved a bunch of files over to an external drive to have enough hard drive space. Had 11GB open when I upg
-
Purchase order print priview and spool print output are different.
Hi Friends, there is problem with purchase order print priview and spool print output are different. mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming.. when i am giving print with spool.. the amount value is
-
An error occurred while publishing file...
Hello all, I've had iWeb for about three weeks now, and have been unable to fully publish my page. I log into .Mac just fine, upload just fine, and publish the first few pages just fine, but once iWeb starts to publish a blog or podcast page, I get a