Requirement to develop New report to display material self life details

Hi,
I have a requiement to develop a report to find material Expiry date susing total self life:
My selection screen:
warehouse number
storage location
storage type
material
material type
total shelf life
My list should display the material number, description,material type, material group, storage unit, total stock, goods receipt date, expiry date.
Please tell me what are the table to be used to fetch these details.
Thanks,

Hi,
For your requirement use the below Table,
material number : MARD-MATNR
description : MAKT-MAKTX
material type : MMARA-MATKL
storage unit - MARD-LGORT
Total stock - MARD-LABST
goods receipt date MSEG -DATE
expiry date MSEG - DATE
Regards
Thiru

Similar Messages

How to develop a report for display unused materials

how to develop a report for display unused materials? where can i find them?

Hi Phani,
I didnt get what u acually mean by unsued material. These are some sample materail types which u can find in table 'Mara' field 'Mtart'.
ABF Waste
AEM Samples
BLG BLG Empties External
BLGA BLGAEmpties Fixed assets
CH00 CH Contract Handling
COMP Prod. alloc., purchased
CONT KANBAN Container
COUP Coupons
DIEN Service
DOCU documentary batch
ERSA Spare parts
FERT Finished product(fert)
FGTR Drinks
FHMI Prod. resources/tools
FOOD Foods (excl. perishables)
FRIP Perishables
GR01 material type 01
GR02 material type 02
HALB Semi-finished product
HAWA Trading goods
HERS Manufacturer parts
HIBE Operating supplies
IBAU Maintenance assembly
INTR Intra material
KMAT Configurable material
LEER Empties
LEIH Returnable packaging
LGUT Empties (retail)
MODE Apparel (seasonal)
NLAG Non-stock material
NOF1 Nonfoods
PIPE Pipeline material
PLAN Trading goods (planned)
etc.
ex:
select * from mara where mtart = 'ABF'.
Regards,
Kiran B

ABAP: Developed new Report for Summarized JIT (Just In Time) calls

Hi to all,
Can anybody please tell me about the following:
· Developed new Report for Summarized JIT (Just In Time) calls: This report is for Delco Singapore needs all Summarized JIT calls created between selected dates to be closed. If JIT call quantity is 0 and GR quantity is also 0, then GR flag for JIT call to be checked and JIT call will not be shown open. If the JIT call quantity is greater than zero and GR for JIT call quantity is zero then JIT call quantity made as zero and GR flag for JIT Call to be checked. Once it is checked the JIT call will not be shown in Open.
Thanks in advance.
Regards
Monalisa

Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region
You would do all these steps for your advanced search page as well, so that in your main jsp, you can call asfPage.setAdvancedSearchPage() with the attribute name of your advanced page.
What I Still do not know is:
(1) My main page keeps coming up saying that there is no default query defined for it. How do you create a default query for a report?
(2) How to get the personalization to work.
Can anyone help?
Thanks!

Develop new Report for Summarized JIT (Just In Time) calls

Hi to all,
Can anybody kindly tell me how to develop new report for summarized JIT (Just In Time) calls.
Thanks in advance,
Regards
Simi

I think it is a good feature, but I'd like to make some suggestions.
1) When the dialog pops up (like your attachment), it would be nice if I could tell it right then that I don't care about that advice. Right now you have to click on the link and then say you don't want the advice in the future. I think it is that extra step that is really annoying. I think, like most people, my instinct is to just close the dialog. Then next time I run LabVIEW I have to deal with it again. After the 5th time dismissing the damn thing I turn it off.
2) It would be nice to have an easy way to turn JIT advice off for a particular session. For example, I'm called on to help get new employees up to speed in LabVIEW. When I sit down at their computer to help design/debug things, I would really like to turn off JIT advice but just for my session. I don't want to change the other persons settings.
3) It would also be nice to be able to turn off JIT advice without going to the options.
So, I guess what I would like is this. When the JIT advice dialog comes up, instead of only having the link to the advice I'd like to see some a button that will turn off this topic in the future, a button that will turn it off for this session of LabVIEW and a button that will turn JIT off for good (with a verification dialog).
So, experience programmers with a new install will just turn it off for good the first time it pops up. Experience programmers on someone else's machine can turn it off without messing up the other persons ini file and I can leave it on when LV8 comes out and just dismiss the old advice quickly as it comes up.
Pat

Custom Report to display Material Number PR00 K004 KF00 MWSTand Total net e

Hi All
I am supposed to develop a report for pricing which is used to quote prices to the customers with all the components of pricing in different columns shown below.
Material Number PR00 K004 KF00 MWSTand Total net effect in different columns and their values using one single report.
Can you please share your experiences
Thanks in advance for your help
Regards
Anishka.

Check T.code V/LD
Hope this help you
Senthils

Requirement: Creation of new report similar to VA05u2026

The Sales team need to use transaction VA05 to show all open orders, for all order types. It currently takes 9 minutes to run an open order report, 11 to include exporting the file from SAP.
There are currently nearly 30,000 Finished Goods open order lines. 29,000 of these are 'Statistical TPI orders', or 97%. This produces a 14MB excel spreadsheet!
These orders have been responsible for process errors and generate confusion within the sales support area, and as order reporting is prevalent across all areas of the business these effects must be common to all areas.
Business wants to create a new report similar to VA05u2026
My query is that I need to create a FD for these Business Requirement..

Hello,
Have you tried VA05N?
This is new version of VA05 & it has many selection criterion... So that you can limit the output as required.
As far as creation of FD is concerned, it all depends on your Standard Process... Generally functional person will have to explain to ABAPer the Required Ourput Format, Feilds details from which the data is to be picked, etc...
It would be better if you prepare a FD which will clarify things to Business & Technical Team.
Hope this helps,
Thanks,
JIgnesh Mehta

ALV report which displays Delivery and Invoice details..by linking vbfa.

Hi...
I wants to develop an ALV Report, which displays Delivery details as well as Invoice details for a range of given sale orders.
For this report I am using Tables : VBAK,VBAP,LIKP,LIPS,VBFA tables .
Here VBFA is a table for Document flow how to link this with report ??
Please reply.
Regards ,
ASHOK
Moderator message : Not enough re-search before posting, spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 9:58 AM

VBFA has VBELV and POSNV can be used to map VBAP (sales order item) i.e.
VBFA-VBELV = VBAP-VBELN AND
VBFA-POSNV = VBAP-POSNV
with VBTYP_N = J Values available in VBFA-VBELN and VBFA-POSNN will be LIPS -VBELN and LIPS-POSNR
VBTYP_N/ VBTYP_V = J stands for delivery and C stands for order
Nitesh

Report for display the list with details of quantity stock order etc

Can anybody give the code to display a list with details of quantity stock for specific materials in specific plants or storage locations based on the input values like plant, storage location, material and product hierarchy entered on the selection screen?

Yes it is possible.
we can try doing this by user exsits. with one of our client we have added a new tab in MIGO transaction.
For details on user exsits user below links
Check out the below links
http://www.sap-img.com/abap/what-is-user-exits.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
here is the user exit examples..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6378ef94-0501-0010-19a5-972687ddc9ef
all the user exits for sd
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/sd%2buser%2bexits
Regards

Report to display material master data changes

Hi,
Is there a standard report available to display all changes to material master data over a specified time frame i.e all changes made alst week,all chnages made today.
Please suggest.
Thanks in advance.

Hi!
Appart from MM04, you can also have a look at MM03 or MM02:
1. Goto MM02 or MM03 transactions and enter the material.
2. Select the relevant views for which you want to have the details.
In the Bar menu follow the path Environment -> Display changes.
Here you will get the list of changes done to the fields with Old and
New values.
Appart from these two tools, there is not any other report provided in the standard for this target.
I hope this helps!
Esther.

Need to develop new Report

Please use a meaningful subject in future
Hi,
can any one please tell me from which table i have to fetch data (i think bseg and bkpf) is it correct.give me an idea for fetching
data and developing report.if possible please give the field names along with table name of below info i would be thankfull.
Report will contain the following information:
-General Ledger account number
-Name of Account
-Amount of Entry
-Date of the document
-Document number
-Debit & Credit side of entry with general ledger and customer account numbers (if applicable).
The filter data will contain:
-User ID
-General Ledger Range fields: From & To
- Date fields: From & To.
The purpose of this report is to list all general ledger entries made by a User for a certain time frame.
Edited by: mohd khan2 on Aug 25, 2009 11:34 AM
Edited by: Matt on Aug 25, 2009 1:08 PM

Hi,
BSEG is the master table(Has all GL/Vendor/Customer) and hence try to restrict the usage. Instead you can use the below tables(they form the child tables for BSEG). This will be performance issues.
Since your requirement is to fetch the GL account and Customer account items,
BSAD :(Accounting: Secondary index for customers (cleared items))
BSID :(Accounting: Secondary index for customers)-Open items
You can also fetch the header details from the table BKPF.
Below are the fields:
General Ledger account number(HKONT)
-Name of Account(You need to get the desciption from SKA1 or SKB1 for the above HKONT)
-Amount of Entry (BSEG/BSAD/BSID-WRBTR)
-Date of the document (BKPF-BUDAT)
-Document number(BKPF-BELNR/BSAD-BELNR/BSID-BELNR/BSEG-BELNR)
-Debit & Credit side of entry with general ledger and customer account numbers (if applicable).(BSEG/BSID/BSAD-SHKZG)
Additioally you need the field KOART which will differentaiat if the line items is for GL/Vendor(K)/Customer(D). This is available in BSEG. For BSAD/BSID you need not check because the table will store only customer line items
Hope this helps
Regards
Shiva

ABAP report to display material wise forecasted value in sap APO

Hi All,
I want to create a ABAP report in which i want to display the forecasted values of the material from the planning book.
Could anyone please help me with the information with any database table or the function module or any other source to get the forecasted value against the key figure ZCONSTR form the planning book data.
It's very urgent.....Awaiting your reply.
Edited by: Komal Bhutada on Jul 22, 2011 5:50 PM

Hi,
You can more details from transaction BAPI->Supply Chain Management ->Advanced Planning and Optimization ->PlanningBookAPS ->GetDetail2 .Here you can find input parameter and in detail documentation.
Regards,
Sunitha

Develope new Report for Summarized JIT (Just In Time) calls

Hi to all,
Can anybody kindly tell me how to solve the following:
This report is for Delco Singapore needs all Summarized JIT calls created between selected dates to be closed. If JIT call quantity is 0 and GR quantity is also 0, then GR flag for JIT call to be checked and JIT call will not be shown open. If the JIT call quantity is greater than zero and GR for JIT call quantity is zero then JIT call quantity made as zero and GR flag for JIT Call to be checked. Once it is checked the JIT call will not be shown in Open.
Thanks in advance
Regards
Simi

I think it is a good feature, but I'd like to make some suggestions.
1) When the dialog pops up (like your attachment), it would be nice if I could tell it right then that I don't care about that advice. Right now you have to click on the link and then say you don't want the advice in the future. I think it is that extra step that is really annoying. I think, like most people, my instinct is to just close the dialog. Then next time I run LabVIEW I have to deal with it again. After the 5th time dismissing the damn thing I turn it off.
2) It would be nice to have an easy way to turn JIT advice off for a particular session. For example, I'm called on to help get new employees up to speed in LabVIEW. When I sit down at their computer to help design/debug things, I would really like to turn off JIT advice but just for my session. I don't want to change the other persons settings.
3) It would also be nice to be able to turn off JIT advice without going to the options.
So, I guess what I would like is this. When the JIT advice dialog comes up, instead of only having the link to the advice I'd like to see some a button that will turn off this topic in the future, a button that will turn it off for this session of LabVIEW and a button that will turn JIT off for good (with a verification dialog).
So, experience programmers with a new install will just turn it off for good the first time it pops up. Experience programmers on someone else's machine can turn it off without messing up the other persons ini file and I can leave it on when LV8 comes out and just dismiss the old advice quickly as it comes up.
Pat

QM02 - Logic Capturing Prod Ord in New Report

Hi,
My client wants to develop a report wherein he will get a detail output of Notification Number, Production Order, Inspection lot, Batch etc in one report.Everything is developed and captured from VIQMEL table except Production Order.
The production order in VIQMEL u2013 FERTAUFNR is not the one that I need.
I want to know the logic behind capturing the Production order entered in QM02 while creating Notification, the type being Deviation. In the header screen of QM02 in the object list table below they select the drop down of Order and enter the production order . I need to pick up this order in my report.
Can anybody let me know the logic behind capturing this order in my report since it is stored in as structure or the where this order can be picked up.
Regards
Bhgl.

Hi ,
We have ECC 6.0.
when we go to QM02 , I enter the notification number which has type as "DV - Deviation".
I enter enter any one of Material, Plant and Batch in reference object tab in the header screen.
Below there is a tab of ASSIGNED OBJECT u2013 ITEM1 which is having object category drop down as "ORDER" " Inspection Lot".
Out of this I select object category as Order and enter the production Order number "1000001".
I add new line item in the object assignment tab and enter another Prod Order and so on.
so this means I have created notification of type " Deviation- DV " for many production orders.
I need to capture this production orders in my new Lot history report.
The order where I enter order number the technical details are the table which is of category structure and i.e." QNAOS_OBJ_DATA_UI " and the field is " ORDER_NO " and not AUFNR.
The order which is in QALS is not what I need neither QMEL-AUFNR is what I need.
I hope this is clear.
Regards
Bhgl

Report to display PO for vendors

hi,
how to develop a report to display all purchase orders for vendors available...
regards
kalpana

Hi,
Select the records from the table EKKO by filtering the vendor (LIFNR)..
Thanks,
Naren

How to develop a report

Hi,
How to Develope a report that displays a purchase requisition with details like MRP controller, release date and unit of measure.

HI,
Just create an internal table with fields PR number, MRP controller, Release date and UNit of measure.
Now write a select statement as below.
Select BANFN DISPO FRGDT MEINS from EBAN into table ITAB
where.......
Regards,
Ram

Requirement to develop New report to display material self life details

Similar Messages

Maybe you are looking for