ABAP Dictionory type FLTP is nt allowed for screen Painter!!

Hello All,
ABAP Dictionary type FLTP is nt allowed for screen Painter!! am getting this error message if am giving some input.
Thanks
santu
Edited by: santu4u on Oct 23, 2009 1:48 PM

Hi
Instead of FLTP use Quantity or Currency or Packed Decimals type fields for the Screen Elements.
While you save the data into the database if the database field is of type FLTP the values entered would be automatically converted into FLTP type. We need not take care of this.
---?? What do you mean by IDES version --->
You mean in SE11 or SE16, Wherever it may be you can not use FLTP type on Screen Fields.
This is Standard SAP Procedure, As mentioned Above you can use Packed Decimals or Currency or Quantity Fields
Cheers
Ram
Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:10 PM
Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:13 PM

Similar Messages

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

Set type COMM_PR_UNIT is not allowed for product type

Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa Rodríguez

Rosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish

Screen shot for screen painter..

hi.. can anyone give me screen shots or kink for screen painter using module pool programing..

Hi,
Check this link for STEP-BY-STEP DEMO FOR SCREEN PAINTER with screen shots
http://abapliveinfo.blogspot.com/2007/12/working-with-screen-painter-in-sap.html
Check this link for Screen Painter Concepts http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801c54454211d189710000e8322d00/frameset.htm
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/MENU&SCREEN_Painter_tutorial.html
http://abap-gallery.blogspot.com/2007/08/screen-painter.html
http://www.thespot4sap.com/articles/SAP_Design_Screen_Elements.asp
Reward points if useful....
Regards
AK

Partitioned IOT of Object Type - mapping table not allowed for bitmap index

Hi,
looks like a feature available for standard Partitioned IOTs is not supported for object based tables, namely the MAPPING TABLE construct to support secondary local bitmap indexes.
Can you confirm behaviour is as expected/documented?
If so, is a fix/enhancement to support mapping table for object-based Partitioned IOTs in the pipeline?
Results for partition-wise load using pipelined table function are very good, look-ups across tens of millions of rows are excellent.
Environment = Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
OS = Oracle Enterprise Linux Server release 5.2 (Carthage) 2.6.18 92.el5 (32-bit)
Here's the potted test-case...
1) First the non object based Partitioned IOT - data is range-partitioned across the alphabet
CREATE TABLE IOT_Table (
textData VARCHAR2(10),
numberData NUMBER(10,0),
CONSTRAINT IOT_Table_PK PRIMARY KEY(textData))
ORGANIZATION INDEX MAPPING TABLE PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
SQL> table IOT_TABLE created.
2) Create the local secondary bitmap index utilising the underlying mapping table
CREATE BITMAP INDEX IOT_Table_BMI1 ON IOT_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
SQL> bitmap index IOT_TABLE_BMI1 created.
3) Quick test to confirm all ok
SQL> INSERT INTO IOT_Table VALUES ('ABC123',100);
SQL> 1 rows inserted.
SQL> SELECT * FROM IOT_Table;
TEXTDATA NUMBERDATA
ABC123     100
4) Now create a minimal object type to use as the template for object table
CREATE TYPE IOT_type AS OBJECT
textData VARCHAR2(10 CHAR),
numberData NUMBER(10,0)
) FINAL
SQL> TYPE IOT_type compiled
5) Attempt to create an object-based range partitioned IOT, including MAPPING TABLE clause as per step (1)
CREATE TABLE IOTObj_Table OF IOT_type (textData PRIMARY KEY)
OBJECT IDENTIFIER IS PRIMARY KEY ORGANIZATION INDEX
MAPPING TABLE -- we'd like to use this feature to enable use of Bitmap Indexes...
PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
This errors out with the following...
SQL Error: ORA-25182: feature not currently available for index-organized tables
25182. 00000 - "feature not currently available for index-organized tables"
*Cause:    An attempt was made to use one or more of the following feature(s) not
currently supported for index-organized tables:
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
6) Re-running the create table statement in step 5 without the MAPPING TABLE clause works fine. Not surprisingly an attempt to create a secondary local bitmap index on this table fails as there's no mapping table, like so...
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL
Error at Command Line:99 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
7) Creating a secondary local b-tree index is fine, like so...
SQL> CREATE INDEX IOTObj_Table_I1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
index IOTOBJ_TABLE_I1 created.
8) A quick test to ensure object table ok...
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> 1 rows inserted.
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DEF456     500

Thanks Dan,
the intention is to range partition based on the initial character, so A* -> Text_Part_A, B* -> Text_Part_B, and so on.
Here's an example, using an empty IOTObj_Table as created previously.
1) Set up & confirm some test data (two 'D's, one 'N', and two 'Z's)
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DDD111',510));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('N3000',515));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('ZZ1212',520));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
SQL> COMMIT;
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
N3000     515
Z111X     530
ZZ1212     520
2) Just to prove our IOT is enforcing the Primary Key based on the TextData attribute, try to insert a duplicate
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
Error starting at line 141 in command:
INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530))
Error report:
SQL Error: ORA-00001: unique constraint (OCDataSystems.SYS_IOT_TOP_84235) violated
00001. 00000 - "unique constraint (%s.%s) violated"
*Cause:    An UPDATE or INSERT statement attempted to insert a duplicate key.
For Trusted Oracle configured in DBMS MAC mode, you may see
this message if a duplicate entry exists at a different level.
*Action:   Either remove the unique restriction or do not insert the key.
3) Now confirm that our data has been slotted into the range-based partition we expect using the PARTITION clause of SELECT...
- The two 'D's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_D);
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
- The single 'N'...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_N);
TEXTDATA NUMBERDATA
N3000     515
- The two 'Z's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_Z);
TEXTDATA NUMBERDATA
Z111X     530
ZZ1212     520
4) And to wrap up confirm an empty partition
SELECT * FROM IOTObj_Table PARTITION (Text_Part_W);

Looking for an app that allows for screen switching/maximizing

On my PC at work, I have an app that adds another button to the top menubar of all applications/windows. This button, when clicked, will move the window/application to the "other" monitor/display and can even maximize the window to fit the screen. is there an app like that for the Mac
I kinda need this right away - in a bit of a bind.
Thanks

What do you use on the PC? would be useful when iTunes and others insist on always going to last monitor, even when it is no longer present.
Ah... Windows key + Shift + arrow key on Windows.
Buit right in.
Most likely utility would be SwitchResX, but some features have been removed.
Worth giving a try though.
http://www.madrau.com/functions/sets/sets.html
http://www.madrau.com/news/history/history.php
http://www.versiontracker.com/dyn/moreinfo/macosx/15467
edited

T.code for screen painter

anybody tell me how to create t.code for my screen created in se51

Hi,
Go to SE93
Give the Tcode according to the naming Conventions
check the Box program and screen(dialog transaction)
click on enter
then provide Program Name
Screen Number
and check all the GUI boxes.
and save the Tcode.
Module-pool programs need tcode to exeute.These are type 'I' programs so you cannot execute directly.Plz check the below links you will get a clear idea how to work with module pools.....Just like your report programs this is also quite easy..
check these links
DIALOG Programming
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
Have a look at these good links-
http://www.allsaplinks.com/dialog_programming.html
http://sap.mis.cmich.edu/sap-abap/abap09/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://sap.mis.cmich.edu/abap-00/
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com
http://www.sapgenie.com/abap/example_code.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://www.sapbrain.com/TUTORIALS/default.html
http://www.sappoint.com/abap/spmp.pdf
http://sappoint.com/abap.html
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/abap/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://www.sappoint.com/faq/faqdiapr.pdf
http://www.allsaplinks.com/dialog_programming.html

Dump thrown when tcode for screen painter assigned

HI guys,
I have created a screen and wanted to check how it looks at runtime, for this i assigned a tcode to the report. Now when i run the tcode it throws a dump. the dump is as follows.
The CONTROL "TCTRL_ENTRY" was searched for but not found.
These is either an inconsistency between the screen and the program or
an incorrect ABAP statement (for example, REFRESH CONTROL .. FROM SCREEN
with incorrect control name).
    MODULE STATUS_1000 OUTPUT.
     SET PF-STATUS 'SCR_1000'.
     SET TITLEBAR '001'.
ENDMODULE.                 " The pointer for error is at this line
What could be the possible error?? please let me know.
Thanks in advance...
Regards,
Navin
Edited by: navin.c on Mar 25, 2009 8:18 AM

Do your main program have the piece of code like the following?
CONTROLS:TC_9998 TYPE TABLEVIEW USING SCREEN 9998.
This way you have to declare a table contol. Do it simply with your Table Control name and the screen in which you are using it.E.g. in my case screen is 9998.
regards.
Sarbajit

How to get the field type from the database dictionary in screen painter

hi,
I wanted to create a new input field that input field should have the data element from the structure that i have created. How to get the data field type from the database dictionary in the screen painter

hi
good
there is two kinds of evernt
PROCESS ON HELP-REQUEST
PROCESS ON VALUE-REQUEST.
which ll help you to give two types of help one is f1 help and another one is f4 help
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/e07f622b9911d2954f0000e8353423/content.htm
thanks
mrutyun

ABAP : Screen Painter error

Hi Experts ,
I need your help. Actually i have started working in ABAP as welll. need to know that below is the coding being done for Screen Painter and need your help in troubleshooting error. the Error is :
"Program ZSCREENPAINTER1
"TYPE LINE" or "LIKE LINE" expected, not "BEGIN". ."
coding that i have done is :
PROGRAM ZSCREENPAINTER1.
DATA : OK_CODE TYPE SY-UCOMM,
types: BEGIN OF EKPO,
       EBELP TYPE EBELP,
       BUKRS TYPE BUKRS,
       WERKS TYPE WERKS,
       MATKL TYPE MATKL,
       END OF EKPO.
thanks & regards ,
M.S

just to add to all these answers..
'.' (Dot) acts as end of statement in ABAP as ';' works for C..
and ':'(colon) is used for pipeline or chaining more than one statement.. and chained statements are joined using ','(comma)
so
left side : right side1,
             right side2,
             right side3.
"this actually means..
left side right side1. " ends here
left side right side2. " ends here
left side right side3. " ends here
hope you understand now... its BASIC abap...

ABAP : Screen Painter - Graphical layout

Hi Experts ,
I am doing an assignment for the screen painter. but when i click on the layout of it , I am not getting the graphical input. kindly advise. is there some new setting to made.
thanks & regards ,
M.S

Hi M.S,
If the setting is already check, then the problem is in GUI. While installing GUI there is a option for Screen painter. You need to check it at GUI inatall
For patch details refer [Graphical Layout Editor|http://help.sap.com/saphelp_nwmobile71/helpdata/en/d1/801b77454211d189710000e8322d00/frameset.htm]
Regards
Edited by: Rajvansh Ravi on Nov 26, 2009 6:20 AM

Method SAP_WAPI_WORKITEM_COMPLETE not allowed for type F

Hi Gurus
I have created a webdynpro abap application in which these steps
1. Application triggers the workflow and workitem got created through FM1.
2. Workitem loads up webdynpro abap application from portal or outlook by changing settings in SWFVISU transaction.
3. Application completes the workflow by calling FM2.
Here FM1 is SAP_WAPI_START_WORKFLOW which returns the workitem id. When I am giving the same workitem id in function module SAP_WAPI_WORKITEM_COMPLETE , it is giving me error that Method SAP_WAPI_WORKITEM_COMPLETE not allowed for type F
My workflow has only one activity step which is mapped with class CL_PT_REQ_WF_ATTRIBS and method DUMMY. I have checked the synchronous method.
Please let me know how can I correct it.
With regards
Manu Sharma

Hi
You need to give the workitem id of the dialog task which has been configured in SWFVISU. You will get this workitem id via application parameter in your Webdynpro method.
Wokflow will be completed, if all the steps has been executed
Vinoth
Edited by: S Vinoth on Oct 27, 2010 10:08 AM

"No subtransaction type allowed for this invoice"

Dear Gurus
While creating excise invoice (j1iin) from billing I am getting an error "No subtransaction type allowed for this invoice" . I get this error when I try to save the excise invoice. I am using subtransaction type.
The required config for subtransaction is done. The necessary excise account detemination is done.The config done is
1. excise account per transaction
2. G/ L account per excise.
Is there any setting that is missing?
Regards,
DDP

Hello,
Please have a check again for the below and the sub transaction type
G/L accounts sub transaction type
default groups for all the combinations that are relevant for your transaction
if it still does not work, re login and check again
these are the only settings through the sub transaction is activated
else have a debug with abaper to know the cause as the last option
Thanks
akasha

Email Alert for Process Chain for ABAP Process Type

Hi BW Experts,
                         I created a process chain based on ABAP Process Type ( for Broadcasting rsrd_broadcast_starter). I want to add alert message for each ABAP process if it is failed. But I cant see any option showing Successfull or Error or Always when I select create message option on the process type. How ever I can see for other process chain which is loading data (Process Type is Info Package ) from SAP into BW.
                         Please some one tell me why it is not showing alert message for ABAP Process Type.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jul 13, 2009 10:16 PM

I dont have the exact answer for your question, But as a work around i can suggest you that.
If these ABAP programs are included in a chain and this local chain is a part of meta chain then you can create a message on the local chain.By right clicking on the local chain >Create Message>Success
                                                                                --->Failure
>Always
Hope this resolves the problem tempervorly.I will get back to you once i have
Or the permanent solution is
Its big and also easy method to perform, by this you will be able to get all the options for a ABAP Program also.If you have any questions please let me know.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/creating%20an%20abap%20process%20type%20for%20process%20chains%20in%20bi.pdf

Zero not allowed for price condition type

Hi experts,
   I have a scenario related to return. Based on the received return goods quality, we give different % of reimbursemnet to our customer.
Currently, in my pricing procedure, I have
PRICE COND 1 (which is the original selling price) (not allow manually change)
HA00 (depends on the % of reimbursement, we apply a %. Let's say we give 70% reimbursement to our customer, then we input -30%)
PRICE COND 2 (which is the net value of PRICE COND1 and HA00, calculate type is 2 - Net value)
For PRICE COND 1, and HA00, we haven't assigned any account key to them, since they are for reference only and shouldn't have any account posting.
The problem now is that, we received return goods with damage, and need to give 0% inbursement. For inventory point of view, we do receive the damaged goods and then directly go to scrap. However, when we try to input -100% in HA00 (so net price for that item is 0), error occurs when we issue credit for return, account cannot determined for PRICE COND 1 and HA00. It is because when PRICE COND 2 is not zero, PRICE COND 1 and HA00 are both become inactive in conditions. But now, since PRICE COND 2 is zero, both PRICE COND 1 and HA00 are become active and due to missing account key, it creates the error during account determination.
   Please kindly help. Thanks.

hi gundam,
   why do u need to create a credit memo for 100% loss?
just need the material movement document that will update the stock accounts then add a billing block.
thank you and best regards.

ABAP Dictionory type FLTP is nt allowed for screen Painter!!

Similar Messages

Maybe you are looking for