[ABAP-HR] FM to delimit Object in OM

Hi Gurus,
I have a request to delimit a custom infotype via report, I would like to know if there is a FM that would delimit OM infotypes.
I have seen HR_INFOTYPE_OPERATION to delimit PA infotypes, is this applicable to OM infotypes?
The initial request was to create an LSMW for creating and delimiting the records, however, the custom infotype (with time constraint 3) has MOLGA in its fields and it is what makes a record unique (+enddate), however, in PP02, there is no input for MOLGA, only subtype which has not been set up for the infotype. if you have any idea for the LSMW approach, it would be good too.
Any info would be helpful. Thank you in advance!
Regards,
Nate

Dear All,
I used FM - 'RH_CUT_INFTY', this will delimit the relationship. Before this I have tried lots of FM, though the sy-subrc was Zero but the record was not getting delimited.
Regards,
Mangalagi S V

Similar Messages

ABAP ER Switching to Business objects

Hi ,
I am ABAP technical Consultant with 5 yrs of Exp. I wanted know whether an ABAPER can swtich to Business Objects.Please help me to take a decision. Do we need to have any prerequisites for swtiching to BO.Please guide me.
And If Yes, please let me know where to start from? Need your valuble advice.
Thanks in advance,
Rinky.

Hi Ingo,
Thanks for your positive reply, which has given me a good confidence.Could you please guide me like where to start from? And also is there any prerequisites to learn Business objects? Please guide me and need you valubale advice.
Thanks a lot,
Rinky Kesh

WebDynpro Abap MSS: Access via "NULL" object reference not possible

hi,
My customer send me the following link to Appraisal Documents (Manager) MSS
http://server.sap.portal:1810/sap/bc/webdynpro/sap/HAP_START_PAGE_POWL_UI_MSS/
http://a.imageshack.us/img685/5959/mss3.jpg (logon in Costumer SAP System)
http://a.imageshack.us/img225/4008/mss4.jpg (Appraisal Documents (Manager) MSS run succesful)
Link that also run by the SICF in my customer is correct.
But when I run in my SAP System see the following error
http://a.imageshack.us/img715/5355/mss1j.jpg (SCIF in my SAP System)
http://a.imageshack.us/img44/5346/mss2.jpg (SCIF - test service)
http://a.imageshack.us/img840/1677/mss2b.jpg (Error, without window logon)
 Access via "NULL" object reference not possible
Other question is: In what part of MSS is this option? because the ESS is in Career and Jobs / Appraisals Documents
http://a.imageshack.us/img683/9900/careerjob3.jpg (Employee Self Service / Career and Jobs / Appraisals Documents)
thanks for your posts and answer
Ivan

Hello
The most important information is (again) missing: which object reference is initial ("NULL")?
The ABAP dump will tell you.
Below I show an example how this can happen (and be avoided):
LOOP AT lt_accountings INTO ls_accounting.
lo_po_account ?= ls_accounting-accounting.
ENDLOOP.
" QUESTION: Are you sure that lo_po_account hold an instance ???
" If LO_PO_ACCOUNT is empty the following statement will give you the dump.
ls_mepoaccounting = lo_po_account->get_data( ).
" And that is how to avoid this (at least the dump. Whether your logic is still ok is another matter...)
CHECK ( lo_po_account IS BOUND ).
ls_mepoaccounting = lo_po_account->get_data( ).
Regards
Uwe

WD(ABAP) - How to convert PDF object to XML

I know there is a way available to converting PDF object to XML in JAVA. However how to achieve this goal in ABAP?
In Web Dynpro ABAP, I can bind a context attribute to the pdfSource property of interactive form element. There also should be method to able to convert the binary content of this attribute to XML format, right? Does anyone know it?
Your help would be greatly appreciated.

Hi all,
As an extension to Fred's question, is it possible to later use the generated XML data and present it in a PDF template? It used to be possible using the FDF format, but Adobe seem to have discontinued that.
My basic requirement is to send the form data to a third party in XML format and for them to be able to view it in human-readable format, preferably using a PDF as a template.
Is this possible?
Thanks,
Jonathan

ABAP Table for Integration Directory Objects

Hi
Is there any ABAP table, which stores the runtime objects, communication channel, It's status, Service etc.
Where you can find out status of each channel and the channel type used within the ABAP stack in Data Dictionary table.
Replies apprecriated.
Swetank

Hi Paresh,
To view the status of adapters you can use RWB.
You dont need to write an ABAP report for this purpose.
RWB->Component Monitoring->Click on Displaye with status "all".
Then..click o Integration Server->Adapter Engine
click on 'Adapter monitoring' in the the 'Status' tab page of the window at the bottom of the screen.
This will launch a widow with status details of all the monitors.
Hope this info helps you.
praveen

ESR Context Objects: using in ABAP or Java

Hello, experts!
Is it possible to use (get values of) Context Objects assigned to Service Interface in ABAP or Java?
If it's possible, than how can we do that?
BR,
Vika

Hello,
Is it possible to use (get values of) Context Objects assigned to Service Interface in ABAP or Java?
Context objects assigned to a service interface can't be retrieved via dynamic configuration hint: I tried it the hard way ;-). Not sure about ABAP, but the same could also be true. I think only the COs that came in with adapter metadata can be accessed(conf.get) and overwritten (conf.put).
Corrections are welcome.
Hope this helps,
Mark

About lock object in Dynpro ABAP

Hi Expert,
We develop the Dynpro ABAP program to modify SAP document on EP,
( like Sales Order, Purchase order...ect. ).
In tranditional ABAP program, we use lock object(lock entry) to lock sigle document( SO, PO.. etc. )
In Dynpro ABAP , how to lock the single document ?

You can also use the "ENQUEUE" and "DEQUEUE" function modules to lock records in WDA as well.
Check out the thread [The effect of Session Expiration on Lock Table |The effect of Session Expiration on Lock Table].
Hope it helps.

BOR Object or ABAP Class

Hi Experts,
We are implementing the Leave Request WF using WS12300111. The user raises a leave request from the portal.
As per the functional point of contact, they have said that this WF can be set up in the configuration in SPRO to be triggered when a leave request is raised.
When we saw the standard SAP provided WF, the steps in it are based on ABAP class. I just want to know if the approach has to be only using ABAP classes or can BOR objects be used.
We require some customizations in the sense, we need to add some custom logic to retrieve some data from some custom tables and also display the same.
Kindly let me know if we need to use ABAP classes or we can use a BOR Object.
Cheers,
Belinda Clarke

Hi Karri,
Thanks a lot for your response.
I was actually evaluating the possibilities of the same as our WF consultant is currently on leave. I was just seeing a scenario where they have used BOR Object for Travel and Expenses module. When i saw the standard WF for Leave Request WS12300111, I was seeing mainly ABAP Objects and there was no BOR objects used.
I just wanted to confirm whether we could create a BOR Object or go on with the ABAP Classes. Does the ABAP Classes involve a lot of effort? We need to actually send email notifications and add some new steps etc...so was just thinking as to which would involve more effort.
We need to actually retrieve data from table PTREQ_ATTABS and send the email notification to the concerned user whenever the leave request is approved/rejected/cancelled as shown below :
Your leave request has been approved/rejected
Name : abcde
Emp No : 123456
Type of Leave : Annual Leave
Date : 7th July to 11th July
No. of Days : 3 days
So do u imply that all of this can be done with an ABAP Class
Could you kindly guide us.

Abap-hr objects

hi friends,
could u plz send me some links where we get the objects related to ABAP-HR?
ie.infotype objects, report objects, etc.
otherwise if u have any objects means plz send me ????
its very urgent........
thanks in advance.
regards,
priya

Hi,
refer these linnks..
http://www.sap-img.com/
http://www.sapdevelopment.co.uk/
With Rgds,
S.Barani

ABAP Code for BI objects

Hi Friends,
I have created BI objects like infocubes, infoobjects, DTP, Datasource to transfer data from a flat file to BI system using SAP GUI... All data from flat file are transfered to BI successfully... i dont have any knowledge in ABAP... So i need to see the ABAP code for the BI objects i created above in my project... how can i see the coding for that?
thanks in advance
sasi

Hi Sasi,
All the objects which you create in BI will be stored in some standad tables,it only fetch details accordingly from those tables.For MasterData you can find the option as Display Routines in Extras.If you want to get more infomation about the STD Table and the Program involed in BI objects,just enter in (/h) mode.
Regards,
Prem

ABAP Unit Test Problem

Here we go again on questions regarding ABAPUnit. We are trying to use Abap unit within a Class object. All the examples we have seen have to do with Classes and Methods within a Report program.
What we have created:
Class: ZCL_MAIN
Type: General Class
Method: test_abapunit
Class: ZCL_MAIN_TEST
Class type: Abap Unit
Sub Class of ZCL_MAIN
Method: Test_abapunit_test
We try and run the Abap Unit Test from the Test Class and it says it is complete but does not execute our code. I know we are doing something wrong but are stumped as to what it is.
Glenn

Hi Glenn,
although Uwe and Klaus actually provided for the relevant information we too faced some difficulties at first understanding 'where' you actually put the test classes. So here are the mechanics:
Open SE80 or SE24 and implement your class ZCL_MAIN.
While this class is opened, choose Goto->Class-local types->Local Class Definitions/Types from the menu. An editor for local classes is opened on the right.
Type in your class definition ZCL_MAIN_TEST like this:
CLASS lcl_main_test DEFINITION FOR TESTING.
"#AU Risk_Level Harmless
PRIVATE SECTION.
 CONSTANTS: some_initial_test_value TYPE i VALUE 5.
 DATA: main_class TYPE REF TO zcl_main.
 METHODS setup FOR TESTING.
 METHODS teardown FOR TESTING.
 METHODS check_get_my_int FOR TESTING.
 METHODS check_.. FOR TESTING.
ENDCLASS.
This is btw a 'normal' local class, no subclass of cl_abap_unit.. whatsoever.
Go back (menu Goto->Class Definition).
Choose Goto->Class-local types->local class implementations from the menu.
Type in your class implementation for ZCL_MAIN_TEST, i.e. implement especially the setup()-method for the test fixture and the various test-methods.
Compile/activate your class ZCL_MAIN.
Run the test by choosing Test->Unit Test from the context menu of the class ZCL_MAIN.
Hope this helps, regards,
Sebastian

XI protocol error occurred in abap proxy scenario- plz

Scenario is asynchronous
Http -> XI ->R/3(abap server proxy)
sender: Through http client
receiver is abap server proxy
Repository objects:
Sender: sender_DT, sender_MT, sender_MI(outbound asynchronous)
Receiver: imported RFC from R/3 client 550, receiver_MI(which has message type refered to the imported RFC)
Interface mapping: source=sender_MI, receiver_MI.
Proxy generated on R/3 client 550 for receiver_MI.
Configuartion objects:
Sender: business service, no comm channel since http sender.
receiver: R/3 business system
Comm channel: receiver_cc type of XI.
transport protocol: http
message protocol : XI 3.0, since both XI and R/3 on webas 6.4
addressing type: URL
target host: diamond
service number: 8005
path: /sap/xi/engine?type=entry
Authentiction data:
user name: user22
passwrod; correct
logon client: 400 which is the same client I developed ll the design and config objects.
Recevr determinaion, interface determination and recevr agrrement looks fine.
The error iam getting is:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">LOOP_IN_MESSAGE_ROUTING</SAP:Code>
<SAP:P1>is.05.diamond</SAP:P1>
<SAP:P2>IS</SAP:P2>
<SAP:P3>XI</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XI protocol error occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Please reply , your help is appreciated.
Thanks
KK

Stefan thanks,
I tried as you suggesetd putting the info of R/3 for
server: diamond
port: 8005
client: 550
user id: user05
pwd: correct
But I get the below error, suggest me what permission should this userid have?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"><html><head><title>Logon Error

What to write in ABAP program at R/3 to call proxy classes.

Hi
I am working on R/3 to File scenario and using ABAP Proxy for outbound.
I have generated proxy in XI server and have coded the program in R/3 but can one tell me wht code needs to be written in ABAP program at R/3 end to connect to ABAP proxy. How those objects will be available in R/3 side.
Please help as it's urgent.
thanks
Ria

Hi Rekha,
Thanks for the link, I did write this code already as follows.
data prxy type ref to zxico_zproxy_interface_po .
create object prxy.
data it type zxipurch_order_info_snd.
try.
     it-purchorderinfo_snd-ebeln = '000010'.
     it-purchorderinfo_snd-werks = '2320'.
     it-purchorderinfo_snd-bedat = '10/11/2005'.
     it-purchorderinfo_snd-potype = '0'.
     call method prxy->execute_asynchronous
       exporting
         output = it.
      commit work
   catch cx_ai_system_fault .
     data fault type ref to cx_ai_system_fault .
     create object fault.
     write :/ fault->errortext.
endtry.
When I do syntex check it give me error message:
The type "ZXICO_ZPROXY_INTERFACE_PO" is unknown. SInce this object was created in XI client so is not available in the R/3 just wondering do i need to create this in R/3 side.
Regards
Ria

Object Category CL_ABAP Class does not exist

Hi Experts,
When Iam creating a workflow tasks or template the object category CL_ABAP Class does not exist in drop down box. Only BOR Business object is appearing. Could anyone help me the problem and how to resolve it.

Jose,
Note: If you are in a 6.20 system and can't see the Object Category choice "ABAP Class", then you first need to execute report SWF_CATID to enable "ABAP Classes" as an available object category. It's already done for you in releases 6.40 and higher.
I am guessing you are in SAP_BASIS 620 version.
Courtesy:
This is from blog written by jocelyn dart of ABAP OO Workflow.
For more details pls check this:
/people/jocelyn.dart/blog/2006/12/19/using-functional-methods-in-workflows-and-tasks
Hope this will help.
Cheers
Jai
PS: Small correction report name is RSWF_CATID not SWF_CATID

ABAP report using /BIC/ tables

Hi Friends,
Have anybody created ABAP reports in BI system using /BIC/ reports & What is the requirement?
Please let me know.
Thanks in advance,
Beena

Hi kvbeena,
it is not clear to me what do you mean by "creation of ABAP reports in BI system using /BIC/ reports"?
In BW routines it is pretty common to read DSO objects by SELECT statements as described in forum referred above.
Also you can use DDIC elements in your custom ABAP reports while creating data objects.
Kindly specify your question in more detail.
BR
m./

[ABAP-HR] FM to delimit Object in OM

Similar Messages

Maybe you are looking for