ABAP HR - New status/sub-status update in Appraisal forms

Hi Abapers,
As of now the program is generating status/sub-status using FM's: HRHAP_C_NAME_READ_D_STAT and HRHAP_C_NAME_READ_D_STAT_SUB. and generating appraisal forms in tcode: PHAP_ADMIN_PA.
Now I have added status/sub-status and date fields in selection screen. Requirement is that the program should check this date against form creation date, If begin date of the form is not after any of three dates specified in selection screen then status/sub-status specified in selection screen is not used. else status/sub-status specified in selection screen is used.
FM: HRHAP_DOCUMENT_PREPARE is used to generate appraisal forms where the status and sub-status are picked from infotype: 5026 and related tables. though i have modified program, new status/sub-status is not reflecting in appraisal forms.. how can i achieve this...
Please help me.. i need your help..

Hi Premraj,
Selection screen: (assumptions)
P_status:
P_begda:
P_endda:
P_date:
Assume that from creation date is system date:
If sy-datum >= p_begda and
sy-datum >= p_endda and
sy-datum >= p_date.
Use the selection screen status/sub-status.(p_status)
Else.
What ever your condition.
Endif.
Please let me know if you need more information.
Regards,
Ramakrishna kotha.
+91 9848468817.

Similar Messages

OnPlus not providing new Contract/Warranty status updates

The Cisco Contract/Warranty notification function in OnPlus is currently not providing new updates.
The Product Contract/Warranty function of OnPlus displays product up-to-date information regarding the Contract status and Warranty for supported Cisco devices. This function is currently not providing new updates to those devices in OnPlus and the OnPlus engineering team is working on a resolution to the problem.
Status updates for other product lifecycle information about Cisco devices, such as, Software and Hardware End-of-Life, Product Security Alerts, and Field Notices are available in OnPlus.
As additional information is known for the time to resolution, we will post more details.
Thanks,
The OnPlus team

We have resolved this issue and OnPlus is now providing complete lifecycle information for new devices scanned or discovered through ON100.
We applogize for any inconvenience.
Thank you,
OnPlus Team

Dead Fusion drive, brand new Late 2013 iMac. No status update from Apple.

Can someone let me know who I shouyld contact with regards to my below issue? I've spent hours upon hours trying to get my new iMac back from Apple store here in New York city, no success.
Purchased a new Late 2013 model 21" build-to-order iMac 3 months ago >
Hard drive partition corrupt within first month which required in store HD partition correction flash via genius bar >
HD hardware failed next month >
Genius appointment Feb 6 2014, was told new fusion drive was required and would take "2-3 days" >
7 days later I went in-store for status and was told they had no info and would call me with an update >
3 more days I go in store again after no call, still no status update >
Forced to purchase a new cheaper PC so I could keep working from home >
Now its 13-14 days later, I just spent over 2 more hours with Apple Support and still no results, now waiting for store Manager (“Matt”, W 14th St store in NYC) to call me. Its been 5 hours since my call this morning.
I have purchased a new computer as I work from home and cannot be without a computer fofr my job. This is ridiculous, I demanded a refund yet was told because I purchased from an authorized reseller (Tekserve - tekserve.com ) and not an actual Apple store, they cannot refund. Tekserve receipt states all support must go through Apple as it’s a build-to-order system. I paid over $1800 for this iMac (2.7GHZ quad core, 16gb RAM, Fusion drive etc..) a few months ago and it’s been the worst experience I’ve ever had with Apple in 7 years. Pi55ed off. Give me a new exact model iMac today OR give me a refund.
Apple employee, Look up the below repair ID, it'll have my cell phone number attached. Call me anytime with a solution. I've spent hours and hours on calls with Apple support with no results, no return calls from store manager.
Serial: D25LG******* / Repair ID R114745188

brettnyc wrote:
Thats my only option, I shall visit the store this evening and demand to see the manager.
Buying from an Authorized Apple reseller should never mean I get any less support than buying direct from Apple.
You're totally correct on both counts, when you ask to speak to the manager, even though you may be tempted to be angry the best approach to handling the situation is by being; calm, organzied and persistent. Bring all receipts, include names, times, places of who you spoke to and state your case.
I'm sure your issue will be addressed. In addition if you are in the US you can always call Apple's customer relations phone number, I believe the current number is 800-767-2775.
Good luck.
<Edited by Host>

Material Ledger New Status - 05 "Period Opened Without Stock"

Hello,
We are thinking of implementing note 1120562 into our system and feel pretty comfortable so far, but I had one question that is stopping me. If I implement this note and it applies the new status so that materials are not selected to run in the material ledger close, will that be an issue when closing next month? I know that previously I was not allowed to close for a material if it had not been closed in the prior month. Has anyone applied this status and had issues?
Thanks in advance!

Hi Rebe,
To see the transactions and documents for ML category in t-code CKM3 report i.e., Beginning Inventory--> choose "Expand sub tree" and choose the corresponding line. I guess these , period status quantities and values entered entries are for New period opening. Whenever the New period is opened, for New materials also, Material Ledger document will be created and updated in Material Price analysis report. The Material ledger records the following categories of data and the system generates ML documents automatically :
01.     Beginning Inventory
02.     Price change
03.     Receipts
04.     Other receipts/consumption
05.     Cumulative inventory
06.     Consumption
Also whenever Price determination for Material Master is changed from 02 to 03 or vice-versa, ML documents will be generated automatically and updates in Material Price Analysis report-t-code-CKM3.
Regards
appalas
Regards
appalas

Status update for MeeGo on the N900

Here's a copy of the text sent by Harri Hakulinen from Nokia. He is the project lead for MeeGo on the N900. This message was sent to the MeeGo developer mailing list just now:
Hello MeeGos !
This is brief status update of "MeeGo to N900" project. This project is currently running as Nokia project, and I am Nokia project lead for it. The current closed mode of development is not the target for us at all, but rather transitional condition. As already discussed by Valtteri in TSG meeting, we are looking into going more open mode shortly. One reason why we have done this on this way is that at the same time we have been trying to handle opening of many currenly closed components that are needed in MeeGo and to build feasible MeeGo images for N900.
However, a lot of related work is already done completely open, you can find more info from places like ofono.org, connman.net and meego.gitorious.org . So if you are eager to contribute or want to closely follow whats happening, please work on those.
As you know, we have delivered working MeeGo images for N900 as part of first code drop in the end of March. At that state we were using older kernel version on N900 than on Atom side, as we used the same kernel (.28) than what is used in Maemo 5 based products today. We ended up doing that simply because lack of time to contribute and port all the drivers to the newer kernels.
Now, for the upcoming May release of MeeGo, we are going to use the same kernel version (.33) than Atom based devices are using. For that we need to submit number of ARM-architecture patches to MeeGo as well, because many of the required ones have just been contibuted upstream kernel and were not available in .33 version originally.
We have already enabled most of the main drivers, like LCD, GFX, Wlan and BT. Still, there is a lot to do in order to enable .33 on N900, like audio drivers, and modem subsystem including SSI buss driver, modem data and audio drivers etc. Our adaptation guys are in fact contributing those modem subsystem related drivers as we speak, and if you are following kernel mailing lists you can see how that goes on.
Besides of enabling the new kernel, we are working with number of smaller and bigger issues for N900. Starting from the beginning, we are now based on ARMv7 combiled code, so the code should be better optimised for N900 now. ARMv5 compilation that was in use for code drop will still be there, and it also seems to be used at least by community project that is planning to release MeeGo for good old N810 tablets
Also, we are planning to enable dual booting of Maemo 5 and MeeGo for the upcoming release. So that will be offered as 3rd way to setup MeeGo to N900, including the existing "native" MeeGo only on N900 and chroot based MeeGo on Maemo 5 setups. Taking the dual boot mode into use likely includes upgrade to Maemo5 kernel as well, but that should not be big issue in the process of enabling that.
As I don't want to go ahead of others working on MeeGo architecture and other issues I will stop now, but I will report again when we have more to tell about the subject.
Br,
// Harri

Here's another update..
It seems that MeeGo on the N900 is not directly being driven by Nokia! It's an open project.. so the net result is MeeGo on the N900 may look and feel very different to Meego on the N900's sucessor
Either way, I'm certainly greatful for their efforts!
Hello Meego's,
As indicated in my previous mail about "MeeGo for N900" status, we were planning to open up our MeeGo work around N900. Now I am happy to announce, that we are there
First, to make it absolute clear for everybody: This is about open MeeGo adaptation to N900 device.
Like any other MeeGo project, it is open source project for all applicaple purposes, and does NOT directly have links to any potential Nokia product or potential product plans. So, based on this or any other of my posts, please do NOT start or continue speculation of upcoming Nokia MeeGo releases. That is practically not helpfull, and mostly only takes our time when we need to explain our words and actions in detail to various directions.
From our part, we are trying to implement the open development model that has been discussed now so many times around MeeGo. On practical terms, we are trying to work based on proposal by Carsten Munk, see
http://wiki.meego.com/Proposal_for_Best_Practices_for_working_in_a_MeeGo_team
We have already created some resources that will be used by the team, you can learn about those and the upcoming ones from http://wiki.meego.com/ARM/N900. We have IRC channel for realtime discussion, we will use meego-dev mailing list for normal discussions and announcements, and we will have Gitorius project for code.
We will evolve our practicies during the work, so if you are interested, stay tuned to those channels. I belive that soon we are also able to figure out, what is best way for community members to help us in development, and then effectively be part of the team.
I would also like to use this as opportunity to introduce the team behind this work (so far) and also thank them about their hard work and long hours. We have team that consist of some Nokia subcontractors and also growing team of Nokia personel:
"MeeGo for N900" team (so far)
- Cybercom Turku team; Marko Saukko, Jouni Peltonen, Sami Sirkiä, Jari Smura and Luka Milovanov.
- Cybercom Tampere team; Kalle Lampila,Teemu Tuominen,Tuukka Mäkinen and Ville Marjusaari.
- Carsten Munk via Nomovok
- Jarkko Nikula via Atomide
- Jan-Simon Möller from Linuxfoundation
- Nokia team; Alexander Kanevskiy, Felipe Contreras, Markus Lehtonen, Ameya Palande, Sakari Poussa, Roger Quadros and me.
In addition to official project team, many Nokia people have helped us despite their hectic daily work, even with their free time. Most of them are driven by the desire to open, repurpose and upstream all relevant sw that has been originally created for Maemo 5 based N900 product during previous years.
Marko, Jouni, Sami & Luka and Markus were working with me already on last year when we did prototypes and interoperability tests of Maemo & Moblin stuff combined in different ways. Based on those we had pretty good picture of what we are doing and why.
And of course, we have had very good and productive co-operation with various Intel teams since those times. Anas Nashif and many others from Intel's MeeGo team have done a lot for us by enabling ARM stuff in MeeGo OBS and repositories.
Last but not least, I want to give special thanks to Stskeeps (alias Carsten Munk . He has teached us how to operate on open, and he has also done respectable amount of this work since early days of Meego. In addition to that, I belive that his earlier work on Maemo community and on Mer project has in fact inspired all of us and shown a way to MeeGo alredy years ago.
Br,
//Harri

Delivery status update in sales document at PGI

Normally system updates the delivery status of sales document line level, when a delivery document is created with respect to that sales document line.
But I want system to update the delivery status (in sales doc. line) when PGI is done for respective delivery document; not at the creation of delivery document. Below I have shown the status updating scenarios that I expect.
Scenario 1
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: Not done
Status in Sales document line should be A (Open)
Scenario 2
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: 50 PCs
Status in Sales document line should be B (Partially delivered)
Scenario 3
Sales doc line qty: 100 PCs
Delivery Doc qty: 100 PCs
PGI: 100 PCs
Status in Sales document line should be C (Fully delivered)
Can anyone propose a possible way of doing this (configuration/ user exits/ BADI etc,)?
Thanks,
Ramindu

Hi,
I dont know it with the use of ABAP development, but by functional logic, can suggest you to configure the rush order sales configuration for your particular sales order.
just check that availability of that particualar sales order is met or not prior to it.
and then automatically when your delivery doc is created, PGI would be done and the status of your sales order would be updated with it.
try it out on your development client, if it works out.
regards,
Siddharth.

STATUS_UPDATE error to update USER STATUS - Update termination error

Hi All,
I am using status_update FM in sales order user exit MV45AFZZ in a perform routine for updating user status in line item for sales order. There are 4 custom statuses created for the sales order line item. 1,2 3, and 4 by configuration. My job is to select one of those based on user selection.
Scenario: During change order process using VA02, I have to change the existing status to a third status when user selects the second one. That is for example, in VA02, user selects status 4 from previous status 3, and save, I have to make the status 4 inactive and save the new status 2 instead of 3 though user selected 3. How do I achieve this.? ????Any programming example is really appreciated. Thanks!!!
I am right now using STATUS_READ and reading the existing status 4. Then making it inactive using status_update FM. And updating the new status 2 as active one and 3 as inactive again. Two inactive updates and one active update is throwing an update termination error while saving the sales order.
Any help is really appreciated.
Thanks
Ricky

Hi ricky,
For saving any changes you need to have a Z-table.
In programs we can't store the user selection. In your case you can create a z-table and store the status there and delete the last status. The process would be faster as you will always have one record in the table.
. One more advantage is you can even track the changes through the Z-table(User who is changing it.)
Hope this solution will surely help you.
Cheers
Suvi

New status for changed records or Additive Delta

Hi Guys,
I have a design question for ODS and Extractor.
The requirement is as follows...
There is a table in CRM with service point as primary key. The fields in the table for example are bill account and Meter ID. Key figure is a XYZ value. In CRM for that Bill account Meter ID combination the XYZ value will change every year. In CRM the same record is being updated with changed value of XYZ. But in BW when the delta is being sent I do not want it to update the existing record but add it as a new record. This way the history can be tracked for previous years XYZ value.
What is required to make this happen?
When creating the extractor I think I should give the delta as new status or additive delta?
What should I indicate as delta specified field?
For the ODS ( I am on BI 7.0) should I create the normal ODS or should I create the write Optimized or something for this requirement ( I dont remember right now the 3 types of ODS we can create).
Your inputs will be greatly appreciated.
Thanks
Kumar.

Thanks Puneet!
Good Answer.
New and Changed records does help in getting the records as desired.
But the problem is while loading into BW I cannot create a new record. The primary key is only Service Point. So even if the key figures and dates associated with that record changes, BW will still update my existing record.
Is there a possibility of using the dates as a pointer that a new record should be created.
Let me explain it better. Following is the structure of table.
Service Point (primary key)
Product GUID (key in CRM)
Circuit ID
Installation date
Effective date
Termination date
CRC (some key figure)
Scenario is - This year Service Point A with CRC value as 50 with effective and termination date for example .. May1 2009 - Apr 31 2010.
Service Point   CRC   EffectiveDate   TerminationDate
A                     50      5/1/2009         4/31/2010
Next year the same service point will have different values and CRM system will update the record in CRM table.
Service Point   CRC   EffectiveDate   TerminationDate
A                     60      5/1/2010         4/31/2011
1) So I was wondering if there is a way or some code can be written to check if effective and termination dates are not same it should be added to ODS as a new record.
2) Another way is to make some sort of Time dependency. Like use Valid From and Valid To dates to track the changes to the record and display all the different values for every record when the CRC values were valid between what dates.
3) or some other way you can suggest

IDoc Status update configuration

I need to utilize the status update process for inbound/outbound IDocs. My EDI translator sends a status IDoc (EDIDS) that has the IDoc number and the status (nothing more). Out EDI services are managed externaly so their only role is to place IDocs onto my SAP server. In other words they do not use call startrfc.
How can I implement the process of updating the status of an IDoc to indicate if there is a failure in subsytem translation, or positive acknowledgement, and so on???

Hi Amtnbiker,
I think your question is more BC related.
Could you please send new thread in Basis middleware forum?
Thanks and best regards,
Smile

Status update

Background : In TMS project IDOC interface is used to send out data from SAP to the external transportation planning systems. This interface includes sending of information related to outbound deliveries, which is performed with specific message type ZVXX_TMS1_TPSDLS. As soon as external system receives outbound delivery data from SAP it generates response messages with technical acknowledgment (message type STATUS) and sends it back to SAP. Then external system process data received from SAP and as data is processed, message with Functional acknowledgement (message type STATUS) is generated and sent out to SAP through XI.
In SAP STATUS messages update outbound delivery messages ZVXX_TMS1_TPSDLS with new statuses received from external system. In this way it is possible to have information in SAP regarding outbound delivery processing in External system.
The problem related to status update process is found. In some cases even STATUS IDOCs are created in correct order in SAP, they update ZVXX_TMS1_TPSDLS messages in incorrect order. And it makes not possible to track actual processing status of outbound deliveries in external system with message ZVXX_TMS1_TPSDLS status record.
Requirements
Basic requirement is to have status for outbound message TMS_TMS1_TPSDLS which reflects progress of data processing in external system.
The right sequence of status scheme is to process technical acknowledgment before the functional acknowledgment.
Can any one help ?

Hi,
One more method is to provide Milestone timing for critical loads/availability of reports.
For eg consider you have one chain loading data into a few critical targets. Depending on the data volume, load timings and post processing identify a critical milestone time by which everyday the chains should be complete. say 9.00 AM in clients time zone (normal beginning of business day when clients may expect a report).
Only in the scenario where its delayed you have to inform client through a mail with the reason for delay and expected time of availability. Otherwise when there is no delay its understood that data is available.
Hope this helps.
Thanks,
JituK

Status update on Sales Opportunity when Quotation is won

I need to set up an automatic status update for the sales opportunity; when the quotation is set as won, the related sales opportunity is also set as won. I have tried the <Define status profile for user statuses> in IMG, but don't seem to get it right..
Can anyone help me?
Krgds, Eva

HI Eva,
Even i did the same thing for my project. Updating the Sub contract status, with whatever the master contract has got.
SO i used the ORDER_SAVE badi, and called a FM , where i wrote the logic to update the subcontract.
So u can also do the same thing, by coding in the ORDER_SAVE badi, what ever logic u want.
Reward points if helpful.
Robin

Disabled sub-status in appraisal form customizing

Dear all,
maybe someone could help me with following issue.
I'm customizing a personnel appraisal form using PHAP_CATALOG including several statuses. In order to complete status customizing, I need to activate all sub-statuses of "In Preparation", but all these checkboxes in tab "Status Flow" are disabled.
I already added these new statuses to the category group, so they are definitely available, but I don not understand, why I can not select them.
Does anyone have an idea about this? Are there any requirements to have "In Preparation" sub-statuses active?
Thanks a lot!
Tobias

Hi Tobias,
Apologies for the delay in replying.
What you can do is:
1. Create one substatus for "In Planning" as "Supervisor Input"
2. Once the phap_prepare or BDC is run and all appraisal templates are attached to employees, as per your status flow templates will be in "In Preparation" status. You need not have any pushbuttons created for this status.
3. Now using PHAP_ADMIN_PA transaction code (administrator's login), push all templates to next status as "In Planning" and substatus as "Supervisor Input".
4. For this you design pushbuttons which will be accessed by manager.
5. So when manager will login to portal, he will have the template available for him to take action on the same.
Please let me know in case of any clarifications.
Thanks!
Best Regards,
Chetan Shriraj Wahane
Edited by: Chetansw on Nov 30, 2010 6:42 AM

E7 - No status updated in contact book with Social...

Hi,
I have noticed a new functionality in the Beta of Social 1.3 where status updates are shown in the contact book respectively. This worked once and stopped ever since. I installed the most current release from the Ovi store (post-beta as of June), but I can't get status updates to the contacts in my contact book. I have mapped the contacts in Social 1.3, as appearently indicated by the icon that looks like a contact book with a little chain piece. But no success yet. Is there a trick to get this to work?
Hints are appreciated
Robert

If your contacts were synced to your Mac, then yes they will have been written to it's hard drive at some point. Whether data recovery software can recover your contacts or not is another question and one that can't be answered because there is no guarantees with data recovery as to what can be recovered.

Handling JavaScript Window Status Update..

Hi,
I am developing a Flex/AIR application which renders HTML content from financial based system.
I have created a subclass of the HTMLHost class in order to handle Javascript events such as window.open().
This works well, but the web application in question stores session information with in the window status. I am having trouble to reflect this in my AIR native windows. Is it possible to make the status bar visible and display the data sent from Javascript?
My HTMLHost subclass is as follows;
package
import flash.display.NativeWindow;
import flash.display.NativeWindowInitOptions;
import flash.display.NativeWindowType;
import flash.display.StageScaleMode;
import flash.geom.Rectangle;
import flash.html.*;
import flash.net.URLRequest;
public class HtmlHost extends HTMLHost
public var htmlControl:HTMLLoader;
public function HtmlHost(defaultBehaviors:Boolean=true)
super(defaultBehaviors);
override public function createWindow(windowCreateOptions:HTMLWindowCreateOptions):HTMLLoader
var initOptions:NativeWindowInitOptions = new NativeWindowInitOptions();
initOptions.minimizable = false;
initOptions.type = NativeWindowType.UTILITY;
var bounds:Rectangle = new Rectangle(
windowCreateOptions.x,
windowCreateOptions.y,
windowCreateOptions.width,
windowCreateOptions.height);
var htmlControl:HTMLLoader = HTMLLoader.createRootWindow(true, initOptions, windowCreateOptions.scrollBarsVisible, bounds);
htmlControl.htmlHost = new HtmlHost();
htmlControl.stage.nativeWindow.alwaysInFront = true;
return htmlControl;
override public function updateTitle(title:String):void
trace ("TITLE UPDATE");
trace (title);
htmlLoader.stage.nativeWindow.title = title;
override public function updateLocation(locationURL:String):void
trace ("LOCATION UPDATE");
trace(locationURL);
htmlLoader.load(new URLRequest(locationURL));
override public function updateStatus(status:String):void
trace ("STATUS UPDATE");
trace(status);
override public function windowClose():void
htmlLoader.stage.nativeWindow.close();
Any help would be greatly appreicated!
Thanks
Oliver

Does anybody have any ideas regarding this question?

BBM 5 status update failed when over 100 contacts

I have found BBM 5.0.0.33 and BBM 5.0.0.55 will not update your status if you have over than 100 contacts.
This has been tested a verified by many blackberry messenger users, with different phones, and different versions of the OS.
There is no solution and almost everything has been tried, from re-installing the OS, to re-adding contacts individually etc..
The only thing to do is to delete your contacts so as the total is below or equal to 100.
I am shocked and surprised that RIM has not acknowledged this problem, nor have they fixed this in the 0.55 release.
It seems to be a trivial problem, with a magic number of 100 contacts.
If RIM is trying to prevent the servers from overloading with status update info, at least increase the limit to 200 contacts, as most people will have less than 200 contacts, but a lot have over 100.
The magic number should be 200

Are you still seeing this issue with the new .57 version of BBM?
If you do not have the new version you can get it using your BlackBerry browser www.blackberry.com/messenger
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

ABAP HR - New status/sub-status update in Appraisal forms

Similar Messages

Maybe you are looking for