ABAP New editor issue

Hi All,
I am not able to open programs in New Editor.
Recently I have reinstalled Win XP on my system. I have IE6 and SAP GUI 7.10.
I am not able to switch to New Editor where as it works fine for Old Editor.
I have uninstalled and Reinstalled SAP GUI twice but still its not working.
I also have reinstalled msxml6_x86 as read in some posts.
Please suggest some solution.
Thanks,
Bharat

dear bharat
try to install or upgrade java virtual machine.
or need to remove and reinstall sap gui
remove all content including registry,user setting folder from documents and setting
and all..
finally...re download latest gui from web site.
hope this works
avirat

Similar Messages

ABAP new Editor problem

Hi,
Whenever i want to activate the New ABAP Editor, the SE38 always hangs. So i have to change it back to Old Editor to open Se38. How can i open se38 in new editor??
current sap version ECC 6.0
SAP GUI Release is 710 Final Release
Patch level 0
Plz help...
Thanks in advance...

I had the same issue and realized that some of my colleagues could display the programs. I was convinced that it had to be authorisations because all auths was taken away the previous day and then reinstated for post go-live support.
However - I scratched around and found that if you switch back to the old editor I can view the code (that is the workaround). I then asked the SAP security manager to look into my profiles and something she did enabled me to switch back to the new editor. Here is in her words how she fixed it - "It was a profiles thing"... Afraid not of much help but might give you a starting point. In the mean time you can use the workaround
Bottom line is that it is an authorisations issue.
Cheers,
Corné

ABAP new editor

I would like to use the new front-end editor, but in my GUI setting, can't find the new editor, I am using the SAPGUI version is 710, how can I change it. thanks!

did you see this..
Back-porting the New ABAP Editor to older WebAS Releases
see the blog mentioned.
some problem with your SAP Gui installation. try to re install once again, select all the components when installing.

Where is the "Code Templates" description in ABAP New Editor option?

I added Template in Code Templates.
Where is my template source....
Plz Help me...

Hi Jong chul Shin,
<li>Check the following link and follow the screen shots sequentially.
<li><b><u>[Creating code template in New ABAP Editor|http://an-abaper.blogspot.com/2009/11/creating-code-template-in-new-abap.html]</b></u>
Thanks
Venkat.O

ABAP Sneak Preview SAP NetWeaver 04s: where is the new Editor?

It's so nice to have NetWeawer 2004s up and running...
Anybody knows where is the new ABAP Editor?
As I know, it should be included but I cannot see it...
I'm using the SAPgui 640 Final Release - Patch 8.

i am not sure whether it was there in patch 8, but i upgraded to patch14 and activated the new editor from
se38->utilities->settings->ABAP editor
here choose radiobutton front-end Editor (New)
warning:- dont apply gui patch 15 it has got some problem. when i applied patch 15 i couldnt event start the sap logon pad.
Regards
Raja
Message was edited by: Durairaj Athavan Raja

ABAP New Front-end editor not opening in Windows 7

Hi ,
When I am trying to open a report with the ABAP New Front-End Editor with Windows 7 as OS, the system is getting freezed without navigating to any other screen .The SAP GUI that I am using is Release 710 with Patch level 17.
Please help me to sort out the problem
Thank You.
Regards,
Bala

Hello
please install the latest Sapgui patch 20 and the problem is solved.
BR
Sven

Issue: How can you manipulate tables in new editor

Clients can no longer manipulate a table in the new editor? Where is the ability to control the background colour, set alignment, merge or spilt cells? When will these existing features been enabled in the new editor.

how about merging?
how about splitting cells
How about amending background colours.
How about being able to control widths and padding - clients need a little
but more flexibility...
Kind Regards
Leanne
Leanne O’Sullivan | COO
*t: *+61 2 6882 6758
*m: *+61 402 999 240
skype: leanne.bosweb
*email: *[email protected]
*web: *www.bosweb.com.au
‘Team Bosweb’ specialise in developing online business and making clients
happy!read more <http://boswebsystems.com/our_profile/ourprofile.html>
<http://www.boswebsystems.com/>
On Thu, Mar 12, 2015 at 11:04 PM, Liam Dilley <[email protected]>

How to activate New Editor for XSLT Transformations?

Hello Everyone!
I am currentlyworking on some Simple Transformations (Txn STRANS). As I am very happy with the New Frontend Editor, I would like to use the new Editor for editing Simple Transformations, like I do, when editing usual ABAP Code.
Where can I activate the New Editor fpr XSLT Programs? I have already set the Flag to use the new editor when editing ABAP Code, but this Flag unfortunately has to influence on the editor used for XSLT programs... ;-(
Greetings
--MIKE

Hi all,
How to use conditions in XSLT Transformation,
Thanks
Reddy.n.l

ABAP Code Editor

from where i can download the new ABAP Code Editor.
thx in advance

hi
check the link.
I think if you want the new editor, you should let sap know that your company wants it and they will install it i guess..
i'm not sure..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/acfcf5e6-0b01-0010-97ac-ad3e6020a584.
Cheers
Alfred
Reward with points for helpful answers.

Problem using new editor

Hi people! I hava a strange issue in my machine. I'm currently using SapGUI 710 patch level 7 in my PC. I'm trying to use the new editor, but when I set it and try to open any source codes in SE38 or in SE80 (source codes editor in general) the SapGUI freezes and the only way to get off this, is endind SapLogon with a right click on tray of windows.
Anyone already seen this? If I use the new editor in other machine with the same SapGUI and same server, its works fine...this problem is specific to my machine...
Thanks a lot!

Hi Jack
I encountered the same problem last week in upgrading from 710 Patch 5 to 710 Patch 9. Uninstalling and applying a previous patch to the last one you installed will fail also. Incidentally prior to installing Patch 9, I was happily editing source code in the new editor.
This is how I managed to resolve it:
Had a look around the net and found information on SAPSWEEP.EXE (created by SAP themselves). Used SAPSWEEP.EXE from the setup folder of SAP GUI 640 - this will remove Registry entries and files if you tell it too. I cleared everything at first. If you use this, pull the network cable on the machine in question just in case. It detected a SAP GUI setup I had copied to my Temp folder in case I lost network access, and did think about removing that however I stopped the program running at that point. So it may (I don't know as I did not want it to check the Network drives) delete install instances if you are not careful.
I then removed the following folders (due to the failed uninstall earlier):
C:\Program Files\SAP
C:\Program Files\Common\SAP Shared
C:\Documents and Settings\<my userid>\SapWorkDir
C;\Documents and Settings\<my userid>\Local Settings\Temp (all files removed)
Rebooted laptop.
Re-installed SAP GUI 710 Patch 0. Editing code worked at this point.
Re-installed SAP GUI 710 Patch 9 and still able to edit the code.
I believe my problem came about after a possible corruption involving LIBRFC32.DLL, but I then also lost network connectivity and the ability to acquire a DHCP delivered IP Address. I understand that in 710 the RFC methods have been enhanced, plus MS recompiled the LIBRFC32.DLL using Visual Studio 2005 (rather than .NET 2003).
I have not upgraded to Patch 10 (corporately we are evaluating Patch 9 for release).
Hope that helps to get you back editing again!
Nick

Pluggin for abap code editor

Hi All,
I was wondering is there anyway we could create a pluggin for our existing code editor in abap ?
I have absolutely no idea about how could i do that. If there are any links or tutorials you can help me with, it would be of great help
Thanks & Best Regards,
Prateek

Hi,
Look at Create your own New Editor for BOR objects - ABAP Development - SCN Wiki
Regards,
Jarek

New format issues

Hi,
I guess these might be issues with incomplete migration to the new format but I'll post them here nevertheless:
Incorrect post count - The "total number of posts" in the user information seems to reflect the total number of posts online at the time of the transition instead of total number of posts to date
Joined date changed - the "date joined" in the user info seems to have changed for me - no biggy but this might point to other problems
Incorrect migration of old formats - the old discussions had the editor shortcuts "ii " at the beginning of a new line to create italic text - all these post now display "i " at the start of such lines (with the text not being in bold)
Level info missing - according to the help file, a user should be able to see his/her level per topic as well as overall - I was not able to find this information at all
But then, I am happy to see that you are keeping to make improvements to this forum and I thank all of you for your work - I am especially happy about the new "Preview" button for new messages!
Andreas

Another items is:
Email Notification do not use subject of topic -
In old system the email notifications showed for example "New Formatting issues", or "Re: New Formatting issues". On new system email notifications so as example:"Apple Discussions forum "Feedback about New Discussions" has been updated by Andreas Amann", or "Apple Discussions forum "Feedback about New Discussions" has been updated by John Smith", and so on. Makes it impossible to thread post by topics because all notifications only change if the post is from another group.

Insert email link missing in new editor??

The new editor it seems to be missing inserting a email link.. If I highlight text in the editor and click the insert link button in the toolbar, there is no option for inserting a email address as a link like in the old editor - unless I am missing something? Telling my clients that they have to insert mailto:[email protected] in the external link field seems pretty silly and backward.
Any plans to add this BASIC functionality back into the BC Editor?

Should not be too hard to add under external link in the link manager a email one.
This is all beta Alexander and BC know they got more things and bug fixes to add to it.

Regular Expressions in the new editor

Hi,
we just ubgraded to SAP GUI 6.40 and ERP 2005, when i hit ctrl-h the search and replace dialog is popping up in the new editor. But the checkbox "regular expression" is greyed out and cant be activated. Why?
cu
Rainer

Hi, I can only confirm that. The help indicates that it should work, but on the screencaps, it's grayed out too.
Besides that,
Open completion automatically after is not implemented yet (is mentioned in the help).
There are also problems with the incremental search backwards. It works only once.
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

New Editor bug

The new editor has a bug. When you add 'required' (a legal HTML5 attribute) to an input element it deletes it. You have to add required="required" to make it stick. This is XHTML not HTML5.
i.e.
<input type="text" name="myTextbox" required>
gets rewritten to
<input type="text" name="myTextbox" >
on save.

Yeah, sorry. Bad coding on my part, but I think it's something that will catch people out as BC supplies its form inputs with XHTML markup,
i.e. <input type=text" /> rather than <input type="text">
That's what caused it to break in the first place, not a bug

ABAP New editor issue

Similar Messages

Maybe you are looking for