ABAP objects not editable
Hi friends,
I am trying to edit an ABAP object in workbench. The screen changes from "Display mode" to "Change mode". But all the fields in the object are greyed out.
I have all the required authorizations, still unable to edit.
What could be the reason? Please help.
Regards,
Surjit
Hi Surjit,
Not only SAP objects might be excluded from editing - if a customer object has a different system as source system than the one you are working at you can only make changes using the modification assistant. Check the source system in the object directory entry.
Regards, Gerd
Similar Messages
-
Trying to crop layer, getting "Can't complete because smart object not editable" message
Using PSE v9 on a Mac
I have a layer with an image that I want to crop around an element on the image. I've selected the area and inversed, then hit delete (why isn't there just a 'Crop' command?) and am getting a message that says:
"Could not complete your request because the smart object is not directly editable."
I'm not clear what a smart object is and whey they're not editable, and how I can make this editable, and how does that change the image.
Thanks
dougYou don't won't to crop the whole photo, just delete the area from the layer
that you've selected?
Two ways:
1. Go to Layer>Simplify Layer before using delete.
2. If you want to keep the smart object, select the area you want to keep, not
delete, then hit the Add Layer Mask button at the bottom of the layers panel.
A smart object is usefull for resizing an image layer over and over without losing
quality (the image doesn't pixelate like it does on a non smart object)
If your not planning on doing lots of resizing or transforming on the layer, then removing
the smart object by Layer>Simplify Layer won't make much difference.
MTSTUNER -
SAP System is not the original system of the object being edited
Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh -
ABAP Objects - Sapgui 46D - Partner not reached
Im a starter, completely new to SAP ABAP Objects.
Just installed the 2 CDs delivered with the book ABAP Objects from Horst Keller and Sascha Krüger.
Installed on a stand alone portable Windows XP Pro service pack 2.
No other links to SAP or internet.
First I start Start SAP MBS, is OK
Then start SAP Logon 46D
After the selection of a Description I get the following error message.
Partner not reached (host localhost, service sapdp00)
Time
Release 46D
Component NI(network interface)
Version 34
Return Code -10
Module ninti.c
Line 1008
Detail NiPConnect2
System Call SO_ERROR
Error NO 10061
Error Text WSAECONNREFUSED. Connection refused
Counter 1
Can some one explain me what is need in solving this problem. (Im completely new in SAP)
For the moment I could not find a simple explanation on how to solve this.if you look at the installation documentation in the CD there is a prerequisites which will require to you to configure the MS loop back adapter by entering a specific IP address. check out the documentation in the CD.
Regards
Raja
When you have the latest ABAP NW2004s available for download in SDN why do you want to go for the old one. Unless otherwise there is any specific reason i would strongly suggest you to download the latest minisap (SAP netweaver sneakpreview ABAP NW2004s ) -
When a movie clip contains an object with a z value, I can not edit the object in place, it goes into a seperate window.
This changes the vanishing point relative to the movieclip instead of the stage (allong with everything else).
This makes it very hard to keep track of where the movieclips will end up when actualy playing the animation.I should have explained my situation a little better. I have a machine that's made up of a number of parts, some of them are fairly large and some are quite small. When a user clicks on a part, I want to center that part on the screen and then move whole machine toward the screen until the selected part either fills the screen (for the larger parts) or the part bumps up against the front clip plane (for the smaller parts).
I didn't think of checking for a collision with the ViewPlatform's TG, thanks for mentioning that. I wasn't sure how the ViewPlatform's location relates to the clipping plane, but I'll dig into it. I'm still learning how the ViewingPlatform, the image plate, and the clipping planes all relate to each other. -
Multi object not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"
Subject: Multi object not exported while clicking Edit Object in “Acrobat X Pro to Photoshop CS5”
I unable to get all selected object (images) which from Acrobat X pro to Photoshop CS5, I getting only one image.
It was working fine when used Acrobat 6 & Photoshop CS.
Also I ensured Preference setting as shown below:
Kindly let me know the solution, it should helpful.Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai -
Changes to ABAP Objects via Notes/Packages
Hi,
Is there perhaps a mechanism where one can check all notes/packages that have impacted an ABAP object?
Thanks in advance.
Regards,
Kennedy.Hello Kennedy
If a SAP Note would consist exclusively out of customizing then you have no direct impact on any ABAP "objects".
Otherwise you will always affect repository objects.
You may define a filter of object types (R3TR ....) which you regard as impact on your ABAP objects. Using this filter you can check the contents of a note or EnhPackage(?).
Regards
Uwe -
Error: Could not edit original smart object ...
Hi - I'm getting the following error when double clicking on a Smart Object in Photoshop (CS4)
"Could not edit original smart object because the application which created the smart obejct could not be launched."
Notes
1. The SO was pasted into the psd file moments before from Illustrator.
2. Both applications are open
3. Both files sit on the same disk.
4. XP Pro.
Does anyone have an idea how to get PS to launch its sister program?
Thanks,
SeanHI, I just had the same problem with cs5 on win7. Photoshop cs5 would not open a smart object created in AI CS4 into CS5.
Turns out I had, somehow, lost all my file associations to .ai and .eps files. When I went into properties and told win 7 to open .ai and .eps files with illy all my troubles went away.
Hope my solution helps someone else with the same prob.
jeff -
could not edit original smart object because the application which created the smart object could not be launched
Hi there,
I got this problem when I installed Adob master collection Over CS 5.
I had children book story storis which created in Adobe illustrator CS 5 and I created art boards in Adobe photoshop cs 5.
After installting CS 6 i tried to edit the smart objects and it was not opeinging the smart object file in Illustrator.
I did some tests.
1) Right click on smart object layer and click export contents. Save on desktopp or anywhere you want. (I saved on desktop)
2) I had this file on my desktop (Vector Smart Object10.ai) but it didn't show any icon, which program should open this type of file.
3) Double click on the file and it pop up a extension window 'Click on change and select adobe illustrator' and press OK.
4) Go back to your photoshop file and right click on smart object layer and click dit content. now this time it opens up assets in illustrator.
ENJOY!
Thanks
Haroon
www.4d-studios.co.uk -
Exception 'error_message' in ABAP Objects
I've got a heterogeneous scenario with new program parts in ABAP objects and older parts in classical ABAP.
In the older parts some R/3 standard functions are called which dump dialog messages which are not allowed at that state of the program flow ('on commit').
The simple solution in classical ABAP was to use standard exception 'error_message' in the top level 'call function' statement thus catch all dialog messages in lower levels.
I am looking for an analog solution in object oriented ABAP. But exception 'error_message' is not allowed with 'call method'. It cannot be defined statically in the methods declaration. And the system exception caused by the dialog error message is not included in the set of catchable system errors.
I would be grateful for any hints concerning this problem.Hi
Excuse me! But I didn't want to sent you my answer.
Anyway:
CLASS lcl_my_class DEFINITION.
PUBLIC SECTION.
METHODS my_method
EXPORTING
EXCEPTION TYPE CHAR1
EXCEPTIONS error_messages.
ENDCLASS. "LCL_MY_CLASS DEFINITION
CLASS lcl_my_class IMPLEMENTATION.
METHOD my_method.
IF EXCEPTION = 'X'.
MESSAGE e208(00) WITH 'Message error'
RAISING error_messages.
ELSE.
MESSAGE I208(00) WITH 'OK!'.
ENDIF.
ENDMETHOD. "MY_METHOD
ENDCLASS. "LCL_MY_CLASS IMPLEMENTATION
So you did want to do a call like this:
CALL METHOD lcl_my_class=>my_method
EXCEPTIONS
error_messages = 1
error_message = 2
OTHERS = 3.
No! you can't do it, but you try to insert your call in fm where you use ERROR_MESSAGE addition. I think you can do it if your methods are std.
Max
Message was edited by: max bianchi -
Use of 'ME' keyword in ABAP Objects?
Hi all,
Can any one please use of 'ME' keyword in ABAP Objects?
Thanks,
Vijay.
Moderator message: next time, please search for available information before asking.
Edited by: Thomas Zloch on Sep 16, 2010 5:33 PMHi,
Please find the description about the ME keyword as per the SAP documentation and help.sap.com.
Within the implementation of every instance method, an implicitly created local reference variable called me is available, which points to the instance in which the method is currently being executed. The static type of me is the class in which the instance method is implemented.
Each class implicitly contains the reference variable me. In objects, the reference variable mealways contains a reference to the respective object itself and is therefore also referred to as the self-reference. Within a class, you can use the self-reference me to access the individual class components:
-To access an attribute attr of your class: me->attr
-To call a method meth of your class: CALL METHOD me->meth
When you work with attributes of your own class in methods, you do not need to specify a reference variable. The self-reference me is implicitly set by the system. Self-references allow an object to give other objects a reference to it. You can also access attributes in methods from within an object even if they are obscured by local attributes of the method.
Regards,
Sagar -
Event handling in global class (abap object)
Hello friends
I have 1 problem regarding events in abap object... how to handel an event in global class in se24 .
Regards
Reema jain.
Message was edited by:
Reema JainHello Reema
The following sample report shows how to handle event in principle (see the § marks)..
The following sample report show customer data ("Header"; KNB1) in the first ALV list and sales areas ("Detail"; KNVV) for the selected customer (event double-click) in the second ALV list.
*& Report ZUS_SDN_TWO_ALV_GRIDS
REPORT zus_sdn_two_alv_grids.
DATA:
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_cell_top TYPE REF TO cl_gui_container,
go_cell_bottom TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
gs_layout TYPE lvc_s_layo.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1,
gt_knvv TYPE STANDARD TABLE OF knvv.
"§1. Define and implement event handler method
" (Here: implemented as static methods of a local class)
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_knb1 TYPE knb1.
CHECK ( sender = go_grid1 ).
READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
CALL METHOD go_grid1->set_current_cell_via_id
EXPORTING
* IS_ROW_ID =
* IS_COLUMN_ID =
is_row_no = es_row_no.
* Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ).
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = '1000'.
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
EXPORTING
parent = go_docking
rows = 2
columns = 1
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_top.
CALL METHOD go_splitter->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_cell_top
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
"§2. Set event handler (after creating the ALV instance)
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1. " Or:
" SET HANDLER: lcl_eventhandler=>handle_double_click FOR all instances.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_cell_bottom
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'KNB1'
is_layout = gs_layout
CHANGING
it_outtab = gt_knb1
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'KNVV'
is_layout = gs_layout
CHANGING
it_outtab = gt_knvv " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
* User has pushed button "Display Details"
WHEN 'DETAIL'.
PERFORM entry_show_details.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ENTRY_SHOW_DETAILS
* text
* --> p1 text
* <-- p2 text
FORM entry_show_details .
* define local data
DATA:
ld_row TYPE i,
ls_knb1 TYPE knb1.
CALL METHOD go_grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM knvv INTO TABLE gt_knvv
WHERE kunnr = ls_knb1-kunnr.
ENDFORM. " ENTRY_SHOW_DETAILS
Regards
Uwe -
Why and how to use events in abap objects
Dear all,
Please explain me why and how to use events in abap objects with real time example
regards
pankaj giriHi Pankaj,
I will try to explain why to use events... How to use is a different topic.. which others have already answered...
This is same from your prev. post...
Events :
Technically speaking :
" Events are notifications an object receives from, or transmits to, other objects or applications. Events allow objects to perform actions whenever a specific occurrence takes place. Microsoft Windows is an event-driven operating system, events can come from other objects, applications, or user input such as mouse clicks or key presses. "
Lets say you have an ALV - An editable one ...
Lats say - Once you press some button you want some kind of validation to be done.
How to do this ?
Raise an Event - Which is handled by a method and write the validation code.
Now you might argue, that I can do it in this way : Capture the function code - and call the validate method.
Yes, in this case it can be done.. But lets say .. you change a field in the ALV and you want the validation to be done as soon as he is done with typing.
Where is the function code here ? No function code... But there is an event here - The data changed event.
So you can raise a data changed event that can be handled and will do the validation.
It is not user friendly that you ask the user to press a button (to get the function code) for validation each time he enters a data.
The events can be raised by a system, or by a program also. So in this case the data changed event is raised by a system that you can handle.
Also, Lets say on a particular action you want some code to trigger. (You can take the same example of validation code). In this case the code to trigger is in a separate class. The object of which is not available here at this moment. (This case happens very frequently).
Advantage with events : Event handlers can be in a separate class also.
e.g : In the middle of some business logic .. you encounter a error. You want to send this information to the UI (to user - in form of a pop up) and then continue with some processing.
In many cases - A direct method call to trigger the pop up is not done. Because (in ideal cases) the engine must not interact with UI directly - Because the UI could be some other application - like a windows UI but the error comes from some SAP program.
So - A event is raised from the engine that is handled in the UI and a pop up is triggered.
Here -- I would have different classes (lets say for different Operating Systems). And all these classes must register to the event ERROR raised in application.
And these different classes for different Operation systems will have different code to raise a pop-up.
Now you can imagine : If you coded a pop-up for Windows (in your application logic) .. it will not work for Mac or Linux. But of you raise a event.. that is handled separately by a different UI classes for Win, Linux or Mac they will catch this event and process accordingly.
May be I complicated this explanation .... but I couldn't think of a simpler and concrete example.
Cheers.
Varun. -
Module Pool Programming using Abap Objects
Hi gurus.,
I need to create a module pool program with tabstrips and tablecontrols using Abap objects...plz guide me how i can achieve this... i am very much confused.. i dont know how and where to start .. plz send me documents and sample codes related to this topic..Also hoe i can implement f4 help in screen fields.. plz help me with Sample Code....
Regards.,
S.SivakumarHi Marcelo Ramos.,
here is my code without using WebLOg ..
PROGRAM ZACR018_BOXKOD .
TABLES DECLARATION
TABLES: ZACT02_BOXKOD, ZACS018_STR, MARA.
CONTROLS TABC TYPE TABLEVIEW USING SCREEN 102.
END OF TABLES DECLARATION
DEFINE DYN_DECLARE_CREATE.
DATA: &1 TYPE REF TO &2.
CREATE OBJECT &1.
END-OF-DEFINITION.
CONSTANTS C_WERKS TYPE WERKS_D VALUE '7600'.
CONSTANTS C_REPID TYPE SY-REPID VALUE SY-REPID.
CONSTANTS C_VERID TYPE VERID VALUE '0001'.
CONSTANTS C_MDV01 TYPE MDV01 VALUE 'F3LB02'.
CLASS CL_TABLE_CONTROL DEFINITION.
PUBLIC SECTION.
CLASS-DATA: IT_C_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
CLASS-DATA: WA_DISPLAY TYPE ZACS018_STR.
CLASS-DATA: WA_COLS LIKE LINE OF TABC-COLS.
CLASS-METHODS M1 IMPORTING WA_C_DISPLAY TYPE ZACS018_STR EXPORTING ZACS018_STR_C TYPE ZACS018_STR.
CLASS-METHODS M2 IMPORTING ZACS018_STR_C TYPE ZACS018_STR CHANGING IT_C_DISPLAY LIKE IT_C_DISPLAY.
CLASS-METHODS M3 IMPORTING SAVE_OK TYPE SY-UCOMM CHANGING C_TABC TYPE CX_TABLEVIEW.
CLASS-METHODS M4 IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK TYPE SY-UCOMM
CHANGING C_TABC TYPE CX_TABLEVIEW.
ENDCLASS.
CLASS CL_TABLE_CONTROL IMPLEMENTATION.
METHOD M1.
ZACS018_STR_C = WA_C_DISPLAY.
ENDMETHOD.
METHOD M2.
DESCRIBE TABLE IT_C_DISPLAY.
IF TABC-CURRENT_LINE > SY-TFILL.
APPEND ZACS018_STR_C TO IT_C_DISPLAY.
ELSE.
MODIFY IT_C_DISPLAY FROM ZACS018_STR_C INDEX TABC-CURRENT_LINE.
ENDIF.
ENDMETHOD.
METHOD M3.
IF SAVE_OK = 'CHECK'.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 0.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 1.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ENDIF.
ENDMETHOD.
METHOD M4.
IF MASTER_PATTERN IS INITIAL OR PATTERNSLNO IS INITIAL.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 0.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ELSE.
IF SAVE_OK NE 'CHECK'.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 1.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
INTERFACE I_DATA.
DATA: WA_MARA TYPE MARA.
DATA: WA_MARC TYPE MARC.
DATA: WA_MAST TYPE MAST.
DATA: WA_STKO TYPE STKO.
DATA: WA_MKAL TYPE MKAL.
DATA: IT_STPOX TYPE STANDARD TABLE OF STPOX.
DATA: WA_STPOX TYPE STPOX.
DATA: WA_ZACT02_BOXKOD TYPE ZACT02_BOXKOD.
DATA: IT_C_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
DATA: IT_SORT_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
DATA: WA_DISPLAY TYPE ZACS018_STR.
DATA: W_YIELD(5) TYPE P DECIMALS 2.
METHODS PARTNO_VAL IMPORTING PARTCODE TYPE ZACS018_STR-PARTCODE.
METHODS MAINBI_VAL IMPORTING MAINB TYPE ZACS018_STR-MAINB.
METHODS CAVITY_VAL IMPORTING CAVITY TYPE ZACS018_STR-CAVITY.
METHODS GET_COMP_WT IMPORTING PARTCODE TYPE ZACS018_STR-PARTCODE EXPORTING GROSSWT TYPE ZACS018_STR-GROSSWT.
METHODS NETWT_VAL IMPORTING NETWT TYPE ZACS018_STR-NETWT GROSSWT TYPE ZACS018_STR-GROSSWT.
METHODS MASPAT_VAL IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN.
METHODS PATSLNO_VAL IMPORTING PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN .
METHODS MAX_REF EXPORTING VERSNO TYPE ZACT02_BOXKOD-VERSNO.
METHODS NOOFBOX_VAL IMPORTING BMSCH TYPE ZACT02_BOXKOD-BMSCH.
METHODS TOTTIME_VAL IMPORTING VGW01 TYPE ZACT02_BOXKOD-VGW01.
METHODS TOTRUNWT IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY
EXPORTING W_SUM_RUNWT LIKE ZACS018_STR-NETWT.
METHODS TOTCOMP_WT IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY
EXPORTING W_SUM_COMPWT LIKE ZACS018_STR-NETWT.
METHODS CHECK_OK IMPORTING SAVE_OK TYPE SY-UCOMM.
METHODS SCREEN_DISPLAY IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK TYPE SY-UCOMM.
METHODS DUP_CHECK IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY.
METHODS BOX_YLD IMPORTING W_SUM_COMPWT LIKE ZACS018_STR-NETWT
W_TOT_WT LIKE ZACS018_STR-NETWT
EXPORTING W_YIELD LIKE W_YIELD.
ENDINTERFACE.
CLASS CL_CONTROL_EVENTS DEFINITION.
PUBLIC SECTION.
CLASS-DATA: C_WERKS TYPE WERKS_D VALUE C_WERKS.
INTERFACES I_DATA.
ENDCLASS.
CLASS CL_CONTROL_EVENTS IMPLEMENTATION.
METHOD I_DATA~PARTNO_VAL.
SELECT SINGLE * FROM MARA INTO I_DATA~WA_MARA WHERE MATNR = PARTCODE.
IF SY-SUBRC <> 0.
MESSAGE TEXT-001 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARA-MTART NE 'HALB'.
MESSAGE TEXT-002 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARC INTO I_DATA~WA_MARC WHERE MATNR = PARTCODE AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-003 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARC-FEVOR NE 'KOD'.
MESSAGE TEXT-004 TYPE 'E'.
ENDIF.
ENDIF.
ENDIF.
SELECT SINGLE * FROM MKAL INTO I_DATA~WA_MKAL WHERE MATNR = PARTCODE AND
WERKS = C_WERKS AND
VERID = C_VERID AND
MDV01 = C_MDV01.
IF SY-SUBRC <> 0.
MESSAGE TEXT-028 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~CAVITY_VAL.
SET CURSOR FIELD 'ZACS018_STR-CAVITY' LINE SY-STEPL.
IF CAVITY IS INITIAL.
MESSAGE TEXT-005 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MAINBI_VAL.
SET CURSOR FIELD 'ZACS018_STR-MAINB' LINE SY-STEPL.
IF MAINB IS INITIAL.
MESSAGE TEXT-006 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~GET_COMP_WT.
SET CURSOR FIELD 'ZACS018_STR-PARTCODE' LINE SY-STEPL.
*SELECT SINGLE MAST~MATNR
MAST~WERKS
MAST~STLAL
STKO~DATUV
INTO (I_DATAWA_MAST-MATNR,I_DATAWA_MAST-WERKS,I_DATAWA_MAST-STLAL,I_DATAWA_STKO-DATUV)
FROM MAST AS MAST INNER JOIN STKO AS STKO
ON STKOSTLNR = MASTSTLNR AND STKOSTLAL = MASTSTLAL
WHERE MAST~MATNR = PARTCODE AND
STKO~STLST = '1' AND
STKO~STLTY = 'M' AND
STKO~LKENZ = '' AND
STKO~LOEKZ = ''.
SELECT SINGLE * FROM MAST INTO I_DATA~WA_MAST WHERE MATNR = PARTCODE AND
STLAN = '1' AND
STLAL = '01' AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-009 TYPE 'E'.
ENDIF.
*CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 50
TEXT = TEXT-007.
*WAIT UP TO 2 SECONDS.
REFRESH I_DATA~IT_STPOX.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
FTREL = 'X'
ALEKZ = ' '
ALTVO = ' '
AUFSW = ' '
AUMGB = ' '
AUMNG = 0
AUSKZ = 'X'
AMIND = ' '
BAGRP = ' '
BEIKZ = ' '
BESSL = ' '
BGIXO = 'X'
BREMS = 'X'
CAPID = 'PP01'
CHLST = ' '
COSPR = ' '
CUOBJ = 000000000000000
CUOVS = 0
CUOLS = ' '
DATUV = SY-DATUM
DELNL = SPACE
DRLDT = ' '
EHNDL = '1'
EMENG = 0
ERSKZ = ' '
ERSSL = ' '
FBSTP = ' '
KNFBA = ' '
KSBVO = ' '
MBWLS = ' '
MKTLS = 'X'
MDMPS = ' '
MEHRS = ' '
MKMAT = ' '
MMAPS = ' '
SALWW = ' '
SPLWW = ' '
MMORY = '0'
MTNRV = PARTCODE
NLINK = ' '
POSTP = ' '
RNDKZ = ' '
RVREL = ' '
SANFR = ' '
SANIN = ' '
SANKA = ' '
SANKO = ' '
SANVS = ' '
SCHGT = ' '
STKKZ = ' '
STLAL = '01'
STLAN = '1'
STPST = 0
SVWVO = 'X'
WERKS = C_WERKS
NORVL = ' '
MDNOT = ' '
PANOT = ' '
QVERW = ' '
VERID = ' '
VRSVO = 'X'
IMPORTING
TOPMAT =
DSTST =
TABLES
STB = I_DATA~IT_STPOX
MATCAT =
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT I_DATA~IT_STPOX INTO I_DATA~WA_STPOX.
SELECT SINGLE FEVOR FROM MARC INTO I_DATA~WA_MARC-FEVOR WHERE MATNR = I_DATA~WA_STPOX-IDNRK AND
WERKS = I_DATA~WA_STPOX-WERKS AND
FEVOR = 'MLT'.
IF SY-SUBRC EQ 0.
GROSSWT = I_DATA~WA_STPOX-MNGLG.
EXIT.
ELSE.
CLEAR GROSSWT.
ENDIF.
ENDLOOP.
IF GROSSWT IS INITIAL.
MESSAGE TEXT-008 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~NETWT_VAL.
SET CURSOR FIELD 'ZACS018_STR-NETWT' LINE SY-STEPL.
IF NETWT IS INITIAL.
MESSAGE TEXT-010 TYPE 'E'.
ELSE.
IF NETWT >= GROSSWT.
MESSAGE TEXT-011 TYPE 'E'.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MASPAT_VAL.
IF MASTER_PATTERN IS INITIAL.
MESSAGE TEXT-014 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARA INTO I_DATA~WA_MARA WHERE MATNR = MASTER_PATTERN.
IF SY-SUBRC <> 0.
MESSAGE TEXT-001 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARA-MTART NE 'FHMI'.
MESSAGE TEXT-012 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARC INTO I_DATA~WA_MARC WHERE MATNR = MASTER_PATTERN AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-003 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARC-FEVOR NE 'MLD'.
MESSAGE TEXT-013 TYPE 'E'.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~PATSLNO_VAL.
IF PATTERNSLNO IS INITIAL.
MESSAGE TEXT-016 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO I_DATA~WA_ZACT02_BOXKOD WHERE MASTER_PATTERN = MASTER_PATTERN
AND PATTERNSLNO = PATTERNSLNO.
IF SY-SUBRC EQ 0.
MESSAGE TEXT-015 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MAX_REF.
SELECT SINGLE MAX( VERSNO ) FROM ZACT02_BOXKOD INTO VERSNO.
VERSNO = VERSNO + 1.
ENDMETHOD.
METHOD I_DATA~NOOFBOX_VAL.
IF BMSCH IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT' AND SCREEN-NAME <> 'ZACT02_BOXKOD-PRD_ACT' AND SCREEN-NAME <> 'ZACT02_BOXKOD-SHOTS'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
MESSAGE TEXT-017 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~TOTTIME_VAL.
IF VGW01 IS INITIAL.
MESSAGE TEXT-018 TYPE 'E'.
ENDIF.
IF VGW01 > 480.
MESSAGE TEXT-019 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~TOTRUNWT.
CLEAR W_SUM_RUNWT.
LOOP AT IT_C_DISPLAY INTO I_DATA~WA_DISPLAY.
W_SUM_RUNWT = W_SUM_RUNWT + I_DATA~WA_DISPLAY-NETWT * I_DATA~WA_DISPLAY-CAVITY.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~TOTCOMP_WT.
CLEAR W_SUM_COMPWT.
LOOP AT IT_C_DISPLAY INTO I_DATA~WA_DISPLAY.
W_SUM_COMPWT = W_SUM_COMPWT + I_DATA~WA_DISPLAY-GROSSWT * I_DATA~WA_DISPLAY-CAVITY.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~CHECK_OK.
IF SAVE_OK = 'CHECK'.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMETHOD.
METHOD I_DATA~SCREEN_DISPLAY.
IF MASTER_PATTERN IS INITIAL
OR PATTERNSLNO IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
IF SAVE_OK NE 'CHECK'.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~DUP_CHECK. " IMPORTING IT_C_DISPLAY
DATA: W_PARTCODE LIKE I_DATA~WA_DISPLAY-PARTCODE.
I_DATA~IT_SORT_DISPLAY = IT_C_DISPLAY.
SORT I_DATA~IT_SORT_DISPLAY BY PARTCODE.
CLEAR W_PARTCODE.
LOOP AT I_DATA~IT_SORT_DISPLAY INTO I_DATA~WA_DISPLAY.
IF W_PARTCODE = I_DATA~WA_DISPLAY-PARTCODE.
MESSAGE TEXT-027 TYPE 'E'.
ENDIF.
W_PARTCODE = I_DATA~WA_DISPLAY-PARTCODE.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~BOX_YLD.
W_YIELD = ( W_SUM_COMPWT / W_TOT_WT ) * 100.
ENDMETHOD.
ENDCLASS.
inherited class for edit mode
CLASS CL_CONTROL_EDIT DEFINITION INHERITING FROM CL_CONTROL_EVENTS .
PUBLIC SECTION.
METHODS GET_DATA IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
EXPORTING VERSNO TYPE ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD TYPE ZACT02_BOXKOD
IT_C_DISPLAY LIKE I_DATA~IT_C_DISPLAY
IT_DEL_DISPLAY LIKE I_DATA~IT_C_DISPLAY
TABC TYPE CX_TABLEVIEW.
METHODS PATSLNO_VAL_CHG IMPORTING PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN .
ENDCLASS.
CLASS CL_CONTROL_EDIT IMPLEMENTATION.
METHOD GET_DATA.
IF MASTER_PATTERN IS NOT INITIAL AND PATTERNSLNO IS NOT INITIAL.
IF IT_C_DISPLAY IS INITIAL.
IF IT_DEL_DISPLAY IS INITIAL.
SELECT SINGLE MAX( VERSNO ) FROM ZACT02_BOXKOD INTO VERSNO WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO ZACT02_BOXKOD WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO..
SELECT PARTCODE MAINB CAVITY GROSSWT NETWT FROM ZACT02_BOXKOD INTO
CORRESPONDING FIELDS OF TABLE IT_C_DISPLAY WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO.
IT_DEL_DISPLAY[] = IT_C_DISPLAY[].
DESCRIBE TABLE IT_C_DISPLAY.
TABC-LINES = SY-TFILL.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD PATSLNO_VAL_CHG.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO I_DATA~WA_ZACT02_BOXKOD WHERE MASTER_PATTERN = MASTER_PATTERN
AND PATTERNSLNO = PATTERNSLNO.
IF PATTERNSLNO IS INITIAL.
MESSAGE TEXT-016 TYPE 'E'.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE TEXT-022 TYPE 'E'.
ENDIF.
ENDMETHOD.
ENDCLASS.
inheriting for display
CLASS CL_CONTROL_DISPLAY DEFINITION INHERITING FROM CL_CONTROL_EDIT .
PUBLIC SECTION.
METHODS GET_DISPLAY_DATA IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
VERSNO TYPE ZACT02_BOXKOD-VERSNO
CHANGING IT_C_DISPLAY LIKE I_DATA~IT_C_DISPLAY
ZACT02_BOXKOD TYPE ZACT02_BOXKOD
TABC TYPE CX_TABLEVIEW.
ENDCLASS.
CLASS CL_CONTROL_DISPLAY IMPLEMENTATION.
METHOD GET_DISPLAY_DATA.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO ZACT02_BOXKOD WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO..
IF SY-SUBRC <> 0.
MESSAGE TEXT-026 TYPE 'E'.
ENDIF.
SELECT PARTCODE MAINB CAVITY GROSSWT NETWT FROM ZACT02_BOXKOD INTO
CORRESPONDING FIELDS OF TABLE IT_C_DISPLAY WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO.
DESCRIBE TABLE IT_C_DISPLAY.
TABC-LINES = SY-TFILL.
ENDMETHOD.
ENDCLASS.
DATA: O_CONTROL_EVENTS TYPE REF TO CL_CONTROL_EVENTS.
DATA: O_CONTROL_EVENTS_EDIT TYPE REF TO CL_CONTROL_EDIT.
DATA: O_CONTROL_EVENTS_DISPLAY TYPE REF TO CL_CONTROL_DISPLAY.
SELECTION SCREEN
END OF SELECTION SCREEN
VARIABLE DECLARATION BEGIN WITH W_
DATA: OK_CODE TYPE SY-UCOMM,
SAVE_OK TYPE SY-UCOMM.
DATA: W_TOT_WT LIKE ZACS018_STR-NETWT,
W_SUM_COMPWT LIKE ZACS018_STR-NETWT,
W_SUM_RUNWT LIKE ZACS018_STR-NETWT,
W_YIELD(5) TYPE P DECIMALS 2.
DATA: W_TIMLO TYPE SY-TIMLO,
W_MODE TYPE SY-UCOMM.
DATA: W_SCREEN_NO TYPE SY-DYNNR.
END OF VARIABLE DECLARATION
WORK AREAS DECLARATION BEGIN WITH WA_
DATA: WA_DISPLAY TYPE ZACS018_STR.
END OF WORK AREAS DECLARATION
INTERNAL TABLES BEGIN WITH IT_
DATA: IT_DISPLAY TYPE ZACS018_STR OCCURS 0.
DATA: IT_DISPLAY_PRD TYPE ZACS018_STR OCCURS 0.
DATA: IT_DEL_DISPLAY TYPE ZACS018_STR OCCURS 0.
DATA: IT_ZACT02_BOXKOD TYPE ZACT02_BOXKOD OCCURS 0 WITH HEADER LINE.
DATA: IT_ZACT02_BOXKOD_DEL TYPE ZACT02_BOXKOD OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF IT_F4MASTERPAT OCCURS 0,
MASTER_PATTERN LIKE ZACT02_BOXKOD-MASTER_PATTERN,
END OF IT_F4MASTERPAT.
DATA: BEGIN OF IT_F4PATSLNO OCCURS 0,
MASTER_PATTERN LIKE ZACT02_BOXKOD-MASTER_PATTERN,
PATTERNSLNO LIKE ZACT02_BOXKOD-PATTERNSLNO,
VERSNO LIKE ZACT02_BOXKOD-VERSNO,
END OF IT_F4PATSLNO.
DATA: IT_EXCLUDE TYPE TABLE OF SY-UCOMM..
DATA : IT_DYNPRO LIKE DYNPREAD OCCURS 0 WITH HEADER LINE.
END OF INTERNAL TABLES DECLARATIONS
LOAD-OF-PROGRAM.
CREATE OBJECT O_CONTROL_EVENTS.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
W_MODE = SAVE_OK.
CASE SAVE_OK.
WHEN 'CREATE'.
CALL SCREEN 101.
WHEN 'CHANGE'.
CREATE OBJECT O_CONTROL_EVENTS_EDIT.
CALL SCREEN 101.
WHEN 'DISPLAY'.
APPEND 'SAVE' TO IT_EXCLUDE.
APPEND 'CHECK' TO IT_EXCLUDE.
APPEND 'ADD' TO IT_EXCLUDE.
CREATE OBJECT O_CONTROL_EVENTS_DISPLAY.
CALL SCREEN 101.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0102 OUTPUT
text
MODULE STATUS_0102 OUTPUT.
CALL METHOD CL_TABLE_CONTROL=>M3 EXPORTING SAVE_OK = SAVE_OK CHANGING C_TABC = TABC.
CALL METHOD O_CONTROL_EVENTS->I_DATA~CHECK_OK EXPORTING SAVE_OK = SAVE_OK.
CALL METHOD O_CONTROL_EVENTS->I_DATA~SCREEN_DISPLAY EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK = SAVE_OK.
CALL METHOD CL_TABLE_CONTROL=>M4 EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK = SAVE_OK
CHANGING C_TABC = TABC.
DESCRIBE TABLE IT_DISPLAY.
IF TABC-LINES <= 1.
IF SY-TFILL = 0.
TABC-LINES = 1.
ENDIF.
ENDIF.
IF SAVE_OK NE 'CHECK'.
IF ZACT02_BOXKOD-TOOL_ACT <> 'X'.
CLEAR ZACT02_BOXKOD-PRD_ACT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-PRD_ACT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-PRD_ACT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTRUNWT EXPORTING IT_C_DISPLAY = IT_DISPLAY
IMPORTING W_SUM_RUNWT = W_SUM_RUNWT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTCOMP_WT EXPORTING IT_C_DISPLAY = IT_DISPLAY
IMPORTING W_SUM_COMPWT = W_SUM_COMPWT.
CLEAR W_TOT_WT.
W_TOT_WT = W_SUM_RUNWT + W_SUM_COMPWT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~BOX_YLD EXPORTING W_SUM_COMPWT = W_SUM_COMPWT
W_TOT_WT = W_TOT_WT
IMPORTING W_YIELD = W_YIELD.
IF W_MODE <> 'CREATE'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-SHOTS'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF W_MODE = 'DISPLAY'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ADD' OR SCREEN-NAME = 'ICON_DELETE'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " STATUS_0102 OUTPUT
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'STANDARD' EXCLUDING 'SAVE'.
IF W_MODE = 'CREATE'.
SET TITLEBAR 'STANDARD'.
ELSEIF W_MODE = 'DISPLAY'.
SET TITLEBAR 'STD_DIS'.
ELSE.
SET TITLEBAR 'STD_EDIT'.
ENDIF.
IF SAVE_OK = 'CHECK'.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL > 0.
SET PF-STATUS 'STANDARD'.
ENDIF.
ENDIF.
IF W_MODE = 'DISPLAY'.
SET PF-STATUS 'STANDARD' EXCLUDING IT_EXCLUDE.
ENDIF.
IF ZACT02_BOXKOD-MASTER_PATTERN IS NOT INITIAL AND
ZACT02_BOXKOD-PATTERNSLNO IS NOT INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'TOP'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF W_MODE = 'DISPLAY'.
IF ZACT02_BOXKOD-VERSNO IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-VERSNO'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-VERSNO'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMODULE. " STATUS_0101 OUTPUT
*& Module USER_COMMAND_0102 INPUT
text
MODULE USER_COMMAND_0102 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK.
WHEN 'ADD'.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL >= TABC-LINES.
IF TABC-LINES < 16.
TABC-LINES = SY-TFILL + 1.
ENDIF.
ENDIF.
WHEN 'DEL'.
LOOP AT IT_DISPLAY INTO WA_DISPLAY WHERE MARK = 'X'.
DELETE IT_DISPLAY INDEX SY-TABIX.
ENDLOOP.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL >= 1.
TABC-LINES = SY-TFILL.
ELSE.
TABC-LINES = 1.
ENDIF.
WHEN 'CHECK'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~DUP_CHECK EXPORTING IT_C_DISPLAY = IT_DISPLAY.
WHEN 'SAVE'.
W_TIMLO = SY-TIMLO.
IF W_MODE = 'CREATE'.
PERFORM CREATE_SAVE.
ENDIF.
IF W_MODE = 'CHANGE'.
PERFORM EDIT_SAVE.
ENDIF.
ENDCASE.
IF W_MODE = 'DISPLAY'.
SAVE_OK = 'CHECK'.
ENDIF.
ENDMODULE. " USER_COMMAND_0102 INPUT
*& Module MOD_TABLE INPUT
text
MODULE MOD_TABLE INPUT.
CALL METHOD CL_TABLE_CONTROL=>M2 EXPORTING ZACS018_STR_C = ZACS018_STR CHANGING IT_C_DISPLAY = IT_DISPLAY.
ENDMODULE. " MOD_TABLE INPUT
*& Module ASSIGN OUTPUT
text
MODULE ASSIGN OUTPUT.
CALL METHOD CL_TABLE_CONTROL=>M1 EXPORTING WA_C_DISPLAY = WA_DISPLAY IMPORTING ZACS018_STR_C = ZACS018_STR.
ENDMODULE. " ASSIGN OUTPUT
*& Module CHK_PARTCODE INPUT
text
MODULE CHK_PARTCODE INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~PARTNO_VAL EXPORTING PARTCODE = ZACS018_STR-PARTCODE.
ENDMODULE. " CHK_PARTCODE INPUT
*& Module CHK_CAVITY INPUT
text
MODULE CHK_CAVITY INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~CAVITY_VAL EXPORTING CAVITY = ZACS018_STR-CAVITY.
ENDMODULE. " CHK_CAVITY INPUT
*& Module CHK_MAINB INPUT
text
MODULE CHK_MAINB INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MAINBI_VAL EXPORTING MAINB = ZACS018_STR-MAINB.
ENDMODULE. " CHK_MAINB INPUT
*& Module GET_COMP_WT INPUT
text
MODULE GET_COMP_WT INPUT.
IF W_MODE <> 'DISPLAY'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~GET_COMP_WT EXPORTING PARTCODE = ZACS018_STR-PARTCODE
IMPORTING GROSSWT = ZACS018_STR-GROSSWT.
ENDIF.
ENDMODULE. " GET_COMP_WT INPUT
*& Module CHK_NETWT INPUT
text
MODULE CHK_NETWT INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~NETWT_VAL EXPORTING NETWT = ZACS018_STR-NETWT
GROSSWT = ZACS018_STR-GROSSWT.
ENDMODULE. " CHK_NETWT INPUT
*& Module CHK_MPAT INPUT
text
MODULE CHK_MPAT INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MASPAT_VAL EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN.
ENDMODULE. " CHK_MPAT INPUT
*& Module CHK_SLNO INPUT
text
MODULE CHK_SLNO INPUT.
IF W_MODE = 'CREATE'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~PATSLNO_VAL EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
ELSEIF W_MODE = 'CHANGE' .
CALL METHOD O_CONTROL_EVENTS_EDIT->PATSLNO_VAL_CHG EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
CALL METHOD O_CONTROL_EVENTS_EDIT->GET_DATA EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
IMPORTING VERSNO = ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD = ZACT02_BOXKOD
IT_C_DISPLAY = IT_DISPLAY
IT_DEL_DISPLAY = IT_DEL_DISPLAY
TABC = TABC.
ELSE.
CALL METHOD O_CONTROL_EVENTS_DISPLAY->PATSLNO_VAL_CHG EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
ENDIF.
ENDMODULE. " CHK_SLNO INPUT
*& Module MAX_VER INPUT
text
MODULE MAX_VER INPUT.
IF W_MODE = 'CREATE'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MAX_REF IMPORTING VERSNO = ZACT02_BOXKOD-VERSNO.
ENDIF.
IF W_MODE = 'DISPLAY'.
IF ZACT02_BOXKOD-VERSNO IS INITIAL.
MESSAGE TEXT-023 TYPE 'E'.
ENDIF.
IF ZACT02_BOXKOD-MASTER_PATTERN IS NOT INITIAL AND
ZACT02_BOXKOD-PATTERNSLNO IS NOT INITIAL AND
ZACT02_BOXKOD-VERSNO IS NOT INITIAL.
CALL METHOD O_CONTROL_EVENTS_DISPLAY->GET_DISPLAY_DATA EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
VERSNO = ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD = ZACT02_BOXKOD
IT_C_DISPLAY = IT_DISPLAY
TABC = TABC.
ENDIF.
ENDIF.
ENDMODULE. " MAX_VER INPUT
*& Module CHK_NOBOXES INPUT
text
MODULE CHK_NOBOXES INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~NOOFBOX_VAL EXPORTING BMSCH = ZACT02_BOXKOD-BMSCH.
ENDMODULE. " CHK_NOBOXES INPUT
*& Module CHK_TOTTIME INPUT
text
MODULE CHK_TOTTIME INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTTIME_VAL EXPORTING VGW01 = ZACT02_BOXKOD-VGW01.
ENDMODULE. " CHK_TOTTIME INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'INITIAL'.
SET TITLEBAR 'STANDARD_MAIN'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module EXIT_PROGRAM INPUT
text
MODULE EXIT_PROGRAM INPUT.
LEAVE TO TRANSACTION 'ZAC16'.
ENDMODULE. " EXIT_PROGRAM INPUT -
ABAP Objects - Obsolete Statements
How to get the list of obsolete statements in ABAP Objects?
Moderator message: please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 6, 2010 1:08 PMhi
Check table RODIR
and pass field name obselete ='X' and check data in table
it wil give all details..
it will help you out.
ankit
Moderator message: do not copy other peoples replies, whether in the same thread or not!
Edited by: Thomas Zloch on Oct 6, 2010 1:09 PM
Maybe you are looking for
-
Can I move an iTunes Library to a different disk/account?
It's probably been covered before, but what will happen if I move the Library file and the .xml file from the iTunes Folder to another disk (Internal PBP17). I started using an External Disk when my library outgrew my internal drive. I went about it
-
T400 Vista Business 64: Green battery icon is gone: how do I get it back?
How can I get the green Lenovo battery icon to come back? It's gone, and now I can't switch graphics.
-
Installing games and adding items needing sync function mannually
I hate the sync function on iTunes because I don't store half of my items on my computer and am always moving things around and manually editing id3 tags in iTunes and Syncing deletes things and returns the tags to what they are on the file itself. I
-
Hallo, We are working with a CRM 4.0 and we have a problem with transaction COMM_PCAT_EXPORT Product Catalog XML-Export. Pricing data are not present in XML file. Does anyone has any suggestion? Thanks, regards. Enrica
-
Click won't work right on buttons imported from Photoshop
In Edge, I have created an application where a user can click buttons and then it takes them to a separate scene. However, I seem to have run into a problem where the click only works in a certain area of the box. I created the buttons in Photoshop a