ABAP Program Names to Run V3 Jobs from SM36
Hi,
I would like to Schedule the V3 Jobs for SD, MM, PM and other Modules Throug SM36 , Can you please let me know the ABAP Program Names for all of them or can i have any PDF documents that contains this list?
I could abel to find only for SD I am using (RMBWV311) i need for others please.
regards
Krishna Mohan.
Hi Krishna:
The information below was extracted from the article by P Renjith Kumar (page 8).
"LO Extraction u2013 Part 4 Update Methods"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5039632a-c398-2d10-0aaf-97167a3de753?QuickLink=index&overridelayout=true
Useful reports in Queued delta
The deltas for logistics extractor are moved depending on the setup of Job Control in LBWE.To manually move the deltas we can run the R/3 programs depending on Application Components.Use the following programs to move the deltas manually.Go to transaction SE38 in R/3 and run the relevant program to move data from LBWQ to RSA7 .
u2013 02 Purchasing RMBWV302
u2013 03 Inventory Controlling RMBWV303
u2013 04 Shop Floor Control RMBWV304
u2013 08 Shipment RMBWV308
u2013 11 SD Sales BW RMBWV311
u2013 12 LE Shipping BW RMBWV312
u2013 13 SD Billing BW RMBWV313
Regards,
Francisco Milán.
Similar Messages
-
Today we had this error code on starting Office programs out of the blue. We've had this error in the past and we know what caused it, but that action wasn't taken. I've already read other posts, but no "Answer" provides a real solution to a clear
problem with Office 365.
The error: "We're sorry, but (program name) has run into an error that is preventing it from working correctly. (Program name) will need to be closed as a result."
It offers "Repair Now", then the two following options: "Online" or "Offline". Neither are effective.
In the past we used the Office 365 Fix It tool, but uninstalling and reinstalling Office on a regular basis is unacceptable. Resorting to web apps is also not going to happen.
Running Win 7 Pro 64 bit, fully updated.
We're starting to get fed up with this broken software. Paying monthly for programs that don't work is ridiculous. Any real answers would be greatly appreciated!Locate your Office application and check the setting of Compatibility.
For example,
Right click on Excel (.exe) > Properties > Compatibility > uncheck all the boxes, click Ok and check if it helps.
To access Excel (.exe), open the following location:
C:\Program Files\Microsoft Office\Office15\Excel.exe
Or
C:\Program Files\Microsoft Office 15\Root\Office15\Excel.exe
Try to open Excel and check if it opens.
http://social.technet.microsoft.com/Forums/en-US/590617de-629f-413b-8c11-f3cc79e27e7a/excel-2013-error-on-open-were-sorry-but-excel-has-run-into-an-error-that-is-preventing-it-from?forum=officeitpro
Thanks.
Tony Chen
TechNet Community Support -
How to find abap program name for web ui reports
Hi,
I need to know the abap program name which is developed and configured for
web ui.In our project web ui application crm version 7.0.there reports links are available
with label of business names.
I assume that there will be SPRO configuration for these reports.
Can anyone provide assistant on this to me.
Regards
VirenHi,
Which reports you are referring to? Are you referring to BI reports? If so then i suppose they are triggerred in BI and transferred to CRM.
Regards,
BJ -
Hello experts,
I'm very new to CRM and I have to develop a new smartform about sales. I have a basic problem. I should add an external debug to this program to see the variables etc. I don't know how to monitor the abap program name to place the smartform and if clauses there. Am I thinking in a wrong way or does it work just like what I think? I need an answer and I need it fast please
Thanks
EmreHello Emre,
Your requirement can be fulfilled by using actions, there is no need to add additional coding.
You just need to define an action with start condition defined as '&CRM Sales Transaction.User Status& = <your user status>'
1. Creat your action profile and action with wiszard
SPRO - CRM - Basic Functions - Actions - Actions in Transactions - Create Actions with Wizard
Please use following parameters:
Processing Time = 3 Immediate Processing
Schedule Automatically
Rule Type = Workflow Conditions
Processing types: Smartforms *
Form Name = YOUR smartform
Processing Class CL_DOC_PROCESSING_CRM_ORDER
Processing Method CRM_SALECONT_EXEC_SMART_FORM <- for sales contract
2. Edit the start conditon
SPRO - CRM - Basic Functions - Actions - Actions in Transactions - Change Actions and Conditions - Define Conditions
You need to add the start condition '&CRM Sales Transaction.User Status& = YOUR user status' or '&CRM Sales Transaction.StatusTable& = SYSTEM status'
3. Assign the created action profile in step 1 into your transaction type.
I would also suggest you to go through the following wiki page to get a general idea about actions.
[http://wiki.sdn.sap.com/wiki/display/CRM/Actionprofilesin+SAP-CRM]
Please understand that the above steps are just for your interests, we do not know your business scenario and the detailed business requirement, it is really hard to give an exact desired solution.
Best regards,
Maggie -
DBMS_JOB.RUN: cannot run a job from a job
I'm trying to set up a job to automatically run every October 1st. The "submit" part of this job is pretty simple, but I am getting some errors on the "run" part:
declare
job_nbr binary_integer;
BEGIN
dbms_job.submit(job => job_nbr,
what => 'RESET_ORDER_NBR_SEQ;',
next_date => to_date('10/1/2008', 'mm/dd/yyyy'),
interval => 'add_months(sysdate,12)');
dbms_job.run(job_nbr);
COMMIT;
END;
When I run this script, I get the following error: "ORA-32317: cannot run a job from a job". I know this is due to the dbms_job.run because I don't get the error when I comment this line out. Also, even when I moved the dbms_job.run into its own script (and even hard-coded the job_nbr, so the dbms_job.run was the only line in the script), it still gave me the same error. This is working in SQL Developer when but not in Application Express. It seems to be something specific to the "run", since "submit" and "remove" work fine. Has anyone had any problems like this?MBETTIS,
Rather than including dbms_job.run in your PL/SQL block, why don't you just schedule the job to run via next_date?
Also, the interval will be computed after the job successfully executes. So if your job takes 5 minutes to run, the value of SYSDATE in your interval may "slide" after each execution. Consider using some form of TRUNC against the SYSDATE in your interval if you want to achieve a consistent execution time.
Joel -
Reg: An ABAP program has to run two SAP Queries via BG to Appl. server
Hi,
I have a requirement to develop an ABAP program to be able to run the two Z Queries respectively and be able to download to the file to the application server via background.
The selection is based on the Query Name, Usergroup and plant.How do we capture the data from the Queries and send it to the application server? Submit Statement is not working. There is a FM: RSAQ_REPORT_NAME from which we get the Query program name when Qery name and User group is given as an input.Through the above FM I have got the Query program name and used Submit statement with List_options to capture the Internal table data of that Query. As the Query program is dynamically generated and not available in TSTC, the Submit is not Working. Kindly suggest me is there any other approach to do it.
Please provide me the solution.
Thanks in advance.Please refer to thread [Authorization Error|WDA adobe error] where various solution to the problem specified by you are described.
Regards
Rohit Chowdhary
Edited by: Rohit Chowdhary on Apr 7, 2009 9:41 PM -
ABAP Program to delete the WDSO contents from active data table & Manage Re
Hi,
We have requirement where we have to delete the request id from manage screen and data from Active table of WDSO.
I have gone through this weblink where we have to hardcode the DSO name in the table (Deletion of WDSO (Write-optimized DataStore object) Load requests and active table data without deleting it from targetSAPNetworkWeblogs%2528SAPNetworkWeblogs%2529)
Apart from that is there any suggestions or input where i can have selection screen for DSO and execute that will help us to delete the Request IDs and content of active table from WDSO.
Suggestions or input programs really appreciated.
Kindly do the needful.
Regrads,
Prem
Edited by: pannalde on Nov 22, 2011 8:24 AMHi,
http://help.sap.com/saphelp_nw04/helpdata/en/2d/677b3c513d3311e10000000a114084/content.htm
With program RSSM_DELETE_WO_DSO_REQUESTS it is possible to delete old requests in the Write-Optimized DSO, exactly like we are used to do with PSA requests via a Process Chain.
This program is available as of SAP NetWeaver BW 7.01 SP07. See note 1437407 for details.
You can automate the deletion of old WO requests by using the ABAP program step in the Process Chain.
Regards,
rvc -
ABAP Program Name CHanging the PSA Load status
Hi,
Our Scenario is Non-SAP -> PI -> BI.
Every Day PI reads the file from source and it will directly upload to PSA in BI.But in PSA the status will show as yellow only it is not turning to green.But I am able to see the data in PSA but status is yellow.
When we activate the Data source manually the load status is turning to green.
I heared there is an ABAP Program to change the status.If anybody knows pl provide me the details.
Regards
Ram.Hi Ramakanth,
Yes, that right. I have mistaken here because our pos dispatcher pumps data source every 15 mins thats why its in yellow status. I am sorry about that.
Usually there are some reasons why the PSA in yellow.
1. If the data is being loaded from PSA to data target, it will be in yellow
2. If the data is loaded into PSA then it will be in yellow
3. If we make any changes in the PSA for example deleting few records in psa and then added and transferred records doenst match then it will be yellow. In this case we have to manually change the status.
In your case I am not sure y its not getting into green once is done. We never had any issue. Pos dispatcher runs and uploads the data into PSA and then we upload into targets.
Thanks
Srikanth -
Table Name where the ABAP program names get stored
Can any 1 tell me the table name where the ABAP programs get stored
try TRDIR,TRDIRT,TADIR
regards
shiba dutta -
Regarding ABAP program to read and manipulate data from Excel file....
Hi,
I want to write a ABAP program which will read Excel file which has three columns viz: Col A, Col B and Col C.
If there is no data in Col B and Col C for a given record in Column A, then progam should print all those records on screen with write statement.
Regards,
Rajesh.Hi
Check
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
begcol TYPE i DEFAULT 1 NO-DISPLAY,
begrow TYPE i DEFAULT 1 NO-DISPLAY,
endcol TYPE i DEFAULT 100 NO-DISPLAY,
endrow TYPE i DEFAULT 32000 NO-DISPLAY.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = filename
i_begin_col = begcol
i_begin_row = begrow
i_end_col = endcol
i_end_row = endrow
TABLES
intern = intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
After getting Records in INTERN TABLE You can loop it to check where columns B & C are empty and store them in another table .
LOOP AT intern.
IF INTERN B and C has value .
CONTINUE
ELSE .
MOVE THEM INTO ANOTHER TABLE ITAB .
ENDIF .
ENDLOOP.
THEN LOOP ITAB .
WRITE : ' '
ENDLOP .
Hope this Helps .
Praveen -
Hi Expert,
We have schedule a program with different variant and assigned under the SM36.
Because due to business request to modify some changes, some of the batch job report need to remove.
The problem now is when I open the SM36, all job is assigned with same program name, I'm not able to identify which variant is assigned accordingly. unless I click the Step and check the parameter assigned.
Is there any solution can listed all the parameter assigned under the program ?
We have more than 100 variant assigned. To open the step 1 by 1 might is not reality.
thanks.
rgds,
teeHello Tee, you can read the table "TBTCJSTEP" with the transaction se16/se16n, if you have authorization for these transactions.
Best regards Jerome.
Edited by: Jerome Moutreux on Sep 27, 2011 9:09 AM (correction of grammar and the orthography) -
HELP - ABAP Program Cancelled After Running for 2.5 Hours in Background
I have an ABAP report program that was being tested in our QA system and it died after running for 2.5 hours with the status of "Cancelled" (which, I assume, means it was terminated by SAP for exceeding some type of governor).
I ran Code Analyzer and no performance issues were recognized.
I am running several SELECT statements during program execution. These are a list of all the SELECT statements used in my program. Also, I'm using PNPCE to get a list of pernrs for which to pull data at the beginning of the program.
SELECT *
INTO CORRESPONDING FIELDS OF TABLE gt_p0167
FROM pa0167
WHERE pernr EQ gt_selected_pernrs
AND bplan IN s_bplan
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE fgbdt fasex
INTO (lv_dob, lv_gender)
FROM pa0021
WHERE pernr EQ gt_selected_pernrs
AND subty EQ <fs_dtyxx>
AND objps EQ <fs_didxx>
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE agency ansvh
INTO (p_agency_out, lv_ansvh)
FROM pa0001
WHERE pernr EQ p_pernr_in
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE vorna nachn gbdat perid gesch
INTO (gt_control_table-fname, gt_control_table-lname, gt_control_table-dob, gt_control_table-mskssn, gt_control_table-gender)
FROM pa0002
WHERE pernr EQ p_pernr_in
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE perid
INTO (lv_ssn)
FROM pa0106
WHERE pernr EQ p_pernr_in
AND subty EQ p_subty_in
AND objps EQ p_objps_in
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE smoke
INTO (p_smoker_out)
FROM pa0376
WHERE pernr = p_pernr_in
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE state pstlz zcounty
INTO (p_state_out, lv_zip, p_county_out)
FROM pa0006
WHERE pernr EQ p_pernr_in
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE werks btrtl
INTO (lv_werks, lv_btrtl)
FROM pa0001
WHERE pernr EQ p_pernr_in
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE region
INTO (p_region_out)
FROM zpat_county_code
WHERE county EQ p_county_in.
SELECT SINGLE pernr
INTO lv_pernr
FROM pa0002
WHERE perid EQ gt_cobra_table-l_essn.
SELECT SINGLE eecst ercst
INTO (lv_eecst, lv_ercst)
FROM t5ubi
WHERE barea EQ '01'
AND bplan EQ lv_bplan
AND bcost EQ p_bcost_in
AND cstv1 EQ '0001'
AND smoke EQ p_smoker_in
AND begda LE pn-endda
AND endda GE pn-begda.
SELECT SINGLE kwert
INTO lv_kwert
FROM t511k
WHERE molga EQ '10'
AND konst EQ 'ZCOB1'
AND begda LE pn-endda
AND endda GE pn-begda.The screen shot the tester sent me only says that it was canceled. However, the log shows the following:
09/17/2008 16:54:32 Job Started
09/17/2008 16:54:32 Step 001 started (program ZBNI001...
09/17/2008 19:22:09 ABAP/4 processor: DATASET_NOT_OPEN
09/17/2008 19:22:09 Job cancelled
I'm not sure it was an error, per se, but maybe SAP canceled it because it had been running too long? The "DATASET_NOT_OPEN" is curious although I've no idea what it means.
Thanks for your help. -
OEM ERROR: Run backup job from Enterprise Maneger failed
After configuring backup policy on my database by means of OEM console (Oracle 9.2, OEM 9.2.0.1) scheduled job failed. Job Output show:
"Could Not Find C:\WINNT\TEMP\3212132705.44]" (square bracket at the end of filename). This file (without bracket) exist and contain rman's script.
But how can I force OEM (or RMAN or other product) remove last square bracket!I had the same problem of not discovering nodes and teh problem escalated to a point that jobs remained in "submitting" or "deleting" status. I couldn't delete nodes becuase jobs were dependent on it, and couldn't delete jobs because the node was manually configures.
The following steps are by trial and error and got me back to a working status where nodes are discovered. Try them at your own risk :)
Oracle Agent doens't seem to like changing IPs... if your machine IP has changed do the following:
1. Stop the Agent service (under control panel)
2. under Oracle's folder, ora92/network/agent, backup all the .q and .ora files and delete them. If it does not allow you to delete, disable the Agent service, reboot the computer and try to delete them
3. Start the agent service (if you had disabled it, change the startup back to "automatic"
4. I dropped the OEM repository and recreated it. Not sure if it helped or not, you can do the same or just go ahead and start OMS.
Hope it helps, again, no garantee this works. It did work on my computer. -
Is there any way to run abap program in dialog process with process chain?
Hi.
I just want to run custom abap program in every 30min.
so I made process chain and connect abap program.
but it returns NOTHING when background running.
the program has ABSOLUETLY no problem when it's running DIALOG process.
custom program is modified from sap standard program for my use.
so complicated and hard to read that I cann't figure out what's problem in backgound job and even hard to debug in background process.
is there any way to run abap program in dialog process in every 30 min.?
or call BSP page or call function.
any solution will be helpful that excuting PROGRAM or FUNCTION or BSP PAGE in schedule job and should running dialog process.
thanks.
Lee.Hi,
did you try using sm36 transaction?
1Give these values in Gereral data
Create one sample job "SAMPLE JOB"
Priority "A"
Execu target - Your application server
2Click start conditon
schedule according to ur requirements.
3.Click Step button
Give your ABAP program name.
fill variants if it has any variants.
if it is useful assign points
Regard,
Senthil Kumar.P -
Scheduling ABAP Program to run Daily
Hi,
In my current scenario, i require my ABAP program(ZMYPROGAM) to run periodically (say every 1 hour/ 1 Day). Is it possible to schedule it so?
kindly let me know how to go about.
Regards,
Siva Maranani.Hi Siva,
You can schedule your program as a background Job SM36. Please check the transaction. You will have to set your ABAP program as the job STEP (if you probably have selection screen for your report then you will also need a variant for your report).
Do schedule your program as a 'Periodic Job' and your personal period (daily/hourly).
After you save your settings you can also monitor your job (ABAP Program) from the same transaction or even from CCMS if you like.
hope this helps,
ZAM
Maybe you are looking for
-
In mail, what is difference between deleted and discarded mail
In settings, mail, what is difference between deleted mail and discarded mail? My google account on iPad does not remove mail that I have deleted from account using other devices. My other devices and google accounts don't have this issue. I've check
-
Ways to check user session in SSO (9.0.2) ?
Hi all, I would like to check a user's session at anytime (i.e. before making a query to database). I have created custom login/logout pages and followed the examples provided by Oracle to create my partner application (no problem on that). However,
-
How to Disable SSLv2 in Oracle IAS 10.1.3
How to disable SSLV2 in Oracle IAS 10.1.3.. I added below in ssl.conf file.. But it is not working... SSLProtocol -ALL SSLv3 TLSv1 SSLCipherSuite ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM Thanks Lalitha
-
Can I send an XML file to the server instead of just URL?
I have installed the XML demos on my machine. I am using Oracle 8i. All the demos talks about getting URL and Parameter from the HTML Page, instead of this I want to send my XML file from Java Applet to server. Then do all the searching as is going o
-
Reading Attributes using ABAP DOm
Dear Collegues, I have source message given below PO --- element Header --- element ID --- element SchemaID --- Attribute SchemaAgencyID--- attribute Can any one provide code snippets using ABAp DOm fo