ABAP program running time-BW update Rules

Hi All,
I have an ABAP program that is in one of the update rules from source ODS to destination ODS. Source ODS has 20million records. When we are loading the records to destination ODS , Is there any way I can find howmuch time will take to process 1 record and also when it is running how do I know howmany records it has processed or howmany yet to process ? I have tried with SM50 but not able to find much useful information?
Please help me and if you have any documents please send it to [email protected]
Regards
Vennela

Hi Vennela,
just choose one request and click on monitor -> details. Click on processing -> Data Package 1 -> Update Rules. If you put the cursor on the first node, you'll see a date and time field on the screen (below). If you click on the last node you'll see how long it took to process the records.
Another possibility would be to run it in simulation mode and check the response time. To do so, you'll have to click on 'Response Time' in the SAP GUI field below at the right side of your screen (normally it shows the system name and mandant).
Hope that helps!
Regards
Nicola

Similar Messages

  • ABAP Program to delete the update rules

    Hi guys,
            Is there any ABAP Program to delete the update rules if any body knows.

    Hi dear,
    try with FM RSAU_UPDR_DELETE...
    Hope it helps!
    Bye,
    Roberto
    ...and please dont forget to reward the answers...it-s THE way to say thanks here !

  • How to make an ABAP program run for a specified number of times ?

    assalamoalikum all!!!
    Can some 1 plz tell me that How can I make my ABAP program run ONLY for 2 times (after it went in production etc)
    AND when the program runs for 2 times It then gets hanged/Locked foreever.
    Suppose my program is:
    REPORT twice002.
    write ' I will run only twice bye bye'.

    Well, I guess the only full proof way is to create a custom "Z" table which will hold the counter, in your program you would update this table every time the program runs. In this same program before updating the counter, you would retrieve the counter and check if it is = 2, if so, then write a message and RETURN.
    Regards,
    Rich Heilman

  • What are the special conversions for time in update rules?

    What are the special conversions for time in update rules?

    Hello,
    Special conversions for time in update rules are automatically conversion rules.
    Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
    Assign points if this helps,
    Regards,
    Jorge Diogo

  • ABAP/4 run time error with error code  SNAP_NO_NEW_ENTRY

    Dear All,
               I've installed SAP R/3 IDES on Oracle on Windows 2003 server.After clicking Log on button , I should be asked to enter client,user and password.But, my system does not display such details.Instead I get ABAP/4 run time error with error code  SNAP_NO_NEW_ENTRY that too after a long time.
                Can you please address what is the reason for this problem and how to over ride it?
    Regards,
    S.Suresh

    Hi,
    the most probable reason is an archiver stuck. Backup the archived redo log files and delete them afterwards.
    The database will archive some more logs after this. Handle them in the same manor. For complete explanation search for brtools.
    Regards
    Ralph Ganszky

  • ABAP Runtime error while activating Update rules.

    Hi Gurus,
    Actually we are in NW 2004's SP9.
    While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
    "%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
    Can any one give  correct NOTE number that can fix it or any suggestions.
    Thanks in advance.
    Thanks
    Raju.k

    Hi Sven,
    Now we are also in SP11, But the thing is all the other UR are working fine Except
    this UR. Even there is no perticular NOTE number for this.
    Thanks
    Raju.k

  • New ABAP Program to check Direct UPDATE in Database Table

    Hi all,
    As per customer requirement , I have to develop ONE  Program which find out that  in which ABAP Program , Programmer has used Open Sql command like  UPDATE , DELETE , INSERT , MODIFY to direct update in Database Table.
    Have a look on all Z-ABAPs, find out if there are statements with "update", "delete", "insert" or "modify" in the coding, then find out if updates to sap-Tables are done
    How can I achived that ?
    Please , If anybody is having idea , than please let me know..
    Thanks You ,

    Hi
    Kindly refer to the below link. This has step by step how you can achieve the checks.
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/12659a90-0201-0010-c18b-9d014f9bed0d]
    But if you want to check if any program they have used 'UPDATE' then you can do like below.
    Go to SE38
    Utilities---> Find in Source Code-
    Find --- UPDATE
    In program - Z* or ZX* if you want to search only in Exits
    Regards,
    Vijay V .

  • Convert ABAP code in start routine/update rule to transform. start routine

    Dear BW ABAPers,
    I have created a custom purchasing info cube (YCP_PURC1) based on 0CP_PURC1 standard cube. I would like to convert this new data flow to BI7 (from 3.x), and convert the standard update rule to transformation. I would need to rewrite the below start routine from the standard update rule to a start routine ABAP code in the newly created  transformation / start routine. My ABAP knowledge is limited. Will you please help?
    *this is the start routine from the update rule. As a side note, the data source is 2LIS_02_SCL.
    LOOP AT SOURCE_PACKAGE.
        IF (     SOURCE_PACKAGE-cppvlc  EQ 0
             AND SOURCE_PACKAGE-cppvoc  EQ 0
             AND SOURCE_PACKAGE-cpquaou EQ 0 ).
          DELETE SOURCE_PACKAGE.
          CONTINUE.
        ENDIF.
    no_scl is initial ( e.g. for good receipts, billing)
    value has to be set depending on storno
        IF SOURCE_PACKAGE-no_scl IS INITIAL.
          IF SOURCE_PACKAGE-storno = 'X'.
            SOURCE_PACKAGE-no_scl = -1.
          ELSE.
            SOURCE_PACKAGE-no_scl = 1.
          ENDIF.
          MODIFY SOURCE_PACKAGE.
        ENDIF.
      ENDLOOP.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    Many thanks and look forward to your kind feedback.
    Kind regards,
    Csaba

    Dear All, Durgesh,
    thanks to you all for your valuable input. Mainly the ABAP part was more interesting for me.
    Durgesh, thanks for your input, it was useful. I just had to change the info objects to data source fields and add the lines before the loop:
    DATA: I_PACKAGE TYPE TYT_SC_1.
        FIELD-SYMBOLS <i_package> TYPE tys_sc_1.
        I_PACKAGE[] = SOURCE_PACKAGE[].
        LOOP AT SOURCE_PACKAGE assigning <i_package>.
          IF ( <i_package>-BWGEO EQ 0
          AND <i_package>-BWGEOO EQ 0
          AND <i_package>-BWMNG EQ 0 ).
            DELETE SOURCE_PACKAGE index sy-tabix.
            CONTINUE.
          ENDIF.
    no_scl is initial ( e.g. for good receipts, billing)
    value has to be set depending on storno
          IF <i_package>-NOSCL IS INITIAL.
            IF <i_package>-ROCANCEL = 'X'.
              <i_package>-NOSCL = -1.
            ELSE.
              <i_package>-NOSCL = 1.
            ENDIF.
          ENDIF.
        ENDLOOP.
    Points have been assigned accordingly.
    Thanks,
    Csaba

  • Announcement: LabWindows/CVI 2010 SP1 Run-Time Engine Updated

    A new version of the LabWindows/CVI 2010 SP1 Run-Time Engine (10.0.1.434) is now available for download. The new version includes Security Update 5Q5FJ4QW which resolves security vulnerabilities in components installed with LabWindows/CVI 2010 SP1 and earlier and LabVIEW 2011 and earlier. Further details can be found at KnowledgeBase Article 5Q5FJ4QW: How Does National Instruments Security Update 5Q5FJ4QW Affect Me? Installing the security update will have the same effect as installing the new version of the Run-Time Engine.
    The update can be downloaded from the Drivers and Updates page. The LabWindows/CVIRun-Time Engine is a free download.
    National Instruments
    Product Support Engineer

    The correct link should be this one
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Program run time

    Hai all,
                  I am running a program in bw. How do I know how long it took to execute the program. I mean anywhere in SM37 or SM50? I see that jobs like data loads are visible but I don't know how to see the time for a program run, like start, end time taken etc.
    Thank you.

    Hi dear and welcome on board!
    You can see all this details, but only if you run your program in background...then, in SM37, you will find what you want (double click on your job...)
    If you run it online...you can see it in SM50, but nothing is stored and when the process finishes, the row in SM50 disappears...
    Hope it helps!
    Bye,
    Roberto
    (please don't forget to reward the answers..it's THE way to say thanks here..)

  • Program run time error

    Hi Experts  !
    I have transported a request to prd. server . while executing the t.c error is comming " object hrpyoo11 of class RE and language EN dosent exist " but its not so in dev. server . also , when i am executing it by variant its showing run time error   { message type " " is unknown}  .plz help me in removing these error .
    thanks .
    ranjana

    hi,
    what ur program has
    for ex: if it is a smart form then while executing u get a name for a smartform [Function module name] and u use it in program in development server. when same program transported to production server there u might not be having the FM which leads to a error there so. in such situations if it is smart forms
    then create a variable which holds the name of smartform and pass that variable. in production the smart form when executed creates a FM which is in the variable created by you.'
    if it is in bdc then transport the flat file to production  system --- it might be one cause......
    if helpful reward some points.
    with regards,
    Suresh Aluri.

  • Default maximum run time for updates

    Is there a way to change the default "Max run time" for each update? In SCCM 2007 the default run time was 20 minutes per update, now it is 5 minutes. I have machines that repeatedly fail to install updates because the max time of 300 seconds was
    reached.

    Hi,
    What is the powershell command to change the maximum run time?
    Thanks.
    probably this:
    http://technet.microsoft.com/en-us/library/jj850138(v=sc.20).aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • LabWindows/CVI 2009 Run-Time Engine update

    I wanted to let everyone know that NI has released an udpated CVI 2009 Run-Time Engine. Information on what bug(s) this update fixes can be found here. If you are currently not using the CVI 2009 Run-Time Engine, you do not need to install this update.
    This is an updated installation of the CVI Run-Time Engine, not a patch. If you download and install this update it will upgrade whichever version of the CVI Run-Time Engine you currently have to version 9.1.0.428 (CVI 2009 released with version 9.1.0.427). One way to find out which version of the CVI Run-Time Engine you have installed is to view the version number of c:\windows\system32\cvirte.dll. If you install version 9.1.0.428, any installer distributions that you create from any version of the CVI ADE will include version 9.1.0.428.
    If you have not yet installed LabWindows/CVI 2009, it's recommended that you install this update, either before or after you install CVI 2009.
    Luis

    To be clear, the original problem that you reported ("Attempt to free pointer to memory not allocated by malloc() or calloc()") might very have been the problem that this patch fixed, which was in fact new to 2009. But that problem only happens if there were actual plots in the graph.
    However, after looking at the "dynamic memory is corrupt" isse some more, it turns out that it is actually expected behavior, believe it or not. This is a limitation of easytab controls, caused by how they use callback chaining in their implementation. Whenever a panel or a control has its callback chained, you cannot change the callback, or make a copy of it after the chaining takes place. This is described in the EasyTab_ConvertFromCanvas function help ("...For the same reasons, do not call DuplicatePanel or DuplicateCtrl on any of these panels or controls after the Easy Tab control has been created.").
    As you probably have read elsewhere, easytab controls are quite obsolete. They were a stopgap "solution" to the problem of there not being a native tab control in the CVI user interface library. Native tab controls were finally added in CVI 8.0, and so we recommend that, if possible, users update their code to use these instead.
    Luis

  • ABAP for removing records in update rule

    hello all,
    we have data loading to several infocubes based on sales order type (logical partition).  our entire business and reporting strategy for sales is based on order type.  we have 1 extractor loading these 5 cubes.  we want to code in the update rule to check for each cube a particular value, and if its not this value, remove the record.
    example would be loading order type cube zpt1 we want to check the records coming into this cube that the value for characteristic ziden = z1.  if not, remove the record and do not update the cube.  the other cubes are the same.  cube zpt2 checks if characteristic ziden = z2.  if not, remove all other records.
    can someone inform us how this coding would look like in the update rules?
    thanks so much

    I'm assuming you need code for BW 3.x, since you mentioned Update Rules. There are a couple of ways:
    DELETE
      data_package
    WHERE
      /bic/ziden NE 'Z2'.
    Or
    LOOP AT data_package.
      IF data_package-/bic/ziden NE 'Z2'.
        DELETE data_package.
      ENDIF.
    ENDLOOP.
    If you're on BI 7, then you can create a filter on the DTP to the target so that it only extracts the records needed from the source.
    Edited by: Dennis Scoville on Aug 19, 2009 1:59 PM

  • ABAP program run weekly

    Hi,
    Is there a way in ABAP that would allow a program to schedule itself to run on a weekly basis without going through SM36 and variants?
    Thanks,
    ~Mark

    Hi,
    I don't think there is any option like that. Only thing is that you can create a BDC for the purpose. But again it is complex work. From SE38 main screen itself you can schedule the program. Like from the main se38 screen, type in the program name, from menu->program->schedule. You can schedule it through this way too.
    Regards,
    Renjith Michael.

Maybe you are looking for