ABAP routine for InfoPackage

Hi,
I have an InfoPackage that loads into multiple InfoCubes. Sometime at the end of this year we will stop loading one of the InfoCube.
What ABAP code do I use to achieve this result? How do I do this type of filter from InfoPackage?
Thanks in advance for your precious time and help
Best regard
Arjun

Hi Arjun,
Would be having an InfoPackage against which you would be checking the 'End of the year' ie any time characteristics say 0CALDAY,
In your routine check this InfoObject for End of the year and if true you can allow this to load to further InfoProviders or Datatargets.
Othervise do what ur business logic says.
This you can do provided you know the exact date ( value) .
Otherwise try to find out any infoobject whose value is important in terms for ur infoprovider loading . and you can use that infoobject to check in routine.
Say you want to load XYZ if its not the end of year and otherwise you waht keep it constant.
if SOURCE_FIELDS-Ocalday < '20081231'.
temp = xyz.
else.
temp = '00000000'.
endif.
Results = temp.
Hope this Helps.
Regards
Praeon

Similar Messages

ABAP Routine for 0FISCPER slect options in InfoPackage

Hi,
I am trying to write an ABAP Routine for 0FISCPER as select options (range) dynamically.
Ex:
0FISCPER selection for this year as 001.2008 to 012.2008
0FISCPER selection for next year as 001.2009 to 012.2009.
Now we are changing InfoPackage every year manually, so I need to write a routine for 0FISCPER in InfoPackage to handle dynamically every year
Thanks,
SK.

Hi
write an ABAP routine to get that value..But are you getting any planned data(why you want till end of the year...till infopackage runs is o.k i think, if you don't have planned data)...Any way you can check the below code, which can be useful...
You can see the below code at->your infopackage selections>Ty-->choose variable type as 6 and enter any ABAP routine name( to create) and then there is a button on the application tool bar called 'routine info'..this give you the following information...
Definition
You can define complex selections for InfoPackages and control the automatic deletion of requests from InfoCubes in the scheduler, by using routines.
Routines are processing blocks in ABAP programs that consist of a pre-defined data declaration section and an ABAP subroutine (form routine). In the subroutine you can use all of the ABAP programming functions.
You can use the following routines for making selections in InfoPackages:
1. Selection routines for fields, on the Data Selection tab page
2. Selection routines for file names, on the External Data tab page
3. Selection Routines for selecting the from and to dates for time-dependent data, on tab page Update
4. Selection routines for determining old requests to be deleted after successfully loading a new request, on the Data Target tab page
Program frame:
After you have called up the Editor for routine maintenance, you get the following program frame:
1. Selection routines for fields, on tab page Data Selection:
program conversion_routine.
'$*$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line    -
FORM COMPUTE_<Fieldname>
tables l_t_range structure rssdlrange
changing p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line       -
data: l_idx like sy-tabix.
        read table l_t_range with key
             fieldname = <Fieldname>.
        l_idx = sy-tabix.
        modify l_t_range index l_idx.
        p_subrc = 0.
$$ end of routine - insert your code only before this line       -
ENDFORM.
2. Selection routines for file names, on tabstrip External Data:
FORM compute_flat_file_filename
     changing p_filename like rsldpsel-filename
          p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line-
          p_filename =
          p_subrc = 0.
$$ end of routine - insert your code only before this line-
ENDFORM.
3. Selection routines for selecting the from and to date for time-dependent data, on tabstrip Update:
form compute_time_dependent_dates
     changing p_datefrom type d
              p_dateto   type d
           p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line-
          p_datefrom =
          p_dateto   =
          p_subrc = 0.
$$ end of routine - insert your code only before this line-
ENDFORM.
4. Routines for determining the old requests to be deleted after successfully loading a new request, on tab page Data Targets:
form compute_<InfoCube-Name>
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube <InfoCube-Name>.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line-
     loop at l_t_request_to_delete.
     endloop.
     clear p_subrc.
$$ end of routine - insert your code only before this line-
ENDFORM.
Note:
Those fields flagged with <...> are dependent on the selection fields and are filled automatically by the system when you call up the Editor.
Procedure
Make the following entries:
1. Between $$ begin of global ... and $$ end of global ... you can define data declarations. These are the declaration sections for the local data in the routine. This data is only visible in the routines.
2. The subroutines begin with FORM and end with ENDFORM.
The subroutines for the particular routines are:
Selection routines for fields on tab page Data Selection: FORM COMPUTE_<Field name>
Selection routines for file names on tab page External Data : FORM compute_flat_file_filename
Selection routines for selecting the from and to dates for time-dependent data on tab page Update: FORM compute_time_dependent_dates
Routines for determining old requests to be deleted after successfully loading a new request on tab page Data Target: FORM COMPUTE_<InfoCube-Name>
The subprograms have the following parameters:
Subprogram FORM COMPUTE_<Field name>:
l_t_range
In the table l_t_range the routines for all selection fields that are filled, or have a routine, are made available.
The routines are executed in the scheduler last of all and therefore, you can change all the selections that you have carried out previously.
p_subrc
Using the variable p_subrc you can report errors to the scheduler. p_subrc <> 0 signals an error and means the data request is terminated.
Subprogram FORM compute_flat_file_filename:
p_filename:
You give the name of the file that is to be loaded in parameter p_filename.
This is useful if your file name contains date dependencies that should be determined by sy-datum and calculated during runtime.
p_subrc
You can inform the scheduler of an error with variable p_subrc. p_subrc <> 0 signals an error and means that the data request is terminated.
Subprogram FORM compute_time_dependent_dates:
p_datefrom and p_dateto
Fill these parameters with the from and to dates for time-dependent master data and texts.
p_subrc
You can inform the scheduler about an error using variable >LS>p_subrc. p_subrc <> 0 signals an error and means the data request is terminated.
Subprogram FORM COMPUTE_<InfoCube-Name>:
l_t_request_to_delete
You give the request number of the request that is to be deleted in parameter l_t_request_to_delete. You can also delete requests from the table. These are then not deleted.
p_subrc
You can inform the scheduler about an error with the variable p_subrc. p_subrc signals an error and means the data request is terminated.
3. Insert your program code for the routines between $$ begin of routine ... and $$ end of routine ... so that the respective subprogram variables are supplied with the corresponding values.
4. Check the syntax of your routine with the Check function.
5. You can then transfer the routine with the Save function.
You end routine maintenance when you exit the Editor.
Hope it helps
Thanks,
Teja

ABAP Routine in InfoPackage for selection

Hello,
I have 2 InfoPackages for loading from ODS1 to ODS2. InfoPackage 1 is restricted via ABAP Routine to load only certain customer numbers.
InfoPackage 2 is supposed to load all other customer numbers - therefore the ABAP Routine makes ranges that exclude the customer numbers selected in InfoPackage 1.
Now I face the fact that the selection of InfoPackage 2 is much to small in numbers. Problem is, the ranges only work when entered manually - but via ABAP entry these ranges don`t work. I can`t understand why this problem happens. Do you have an idea?
Example (first number is from, 2nd number is to)
InfoPackage 1: customer numbers
5| 5
100|100
999|999
InfoPackage 2: customer numbers
0|4
4|99
101|998
1000|99999
But selection of InfoPackage 2 does not work propberly...
Thanks for your help,
Angelika

Hi,
no, that was just a typing mistake. Sorry.
The problem is, that in Monitoring I can see the selection and it looks good.
But when I check the number of datasets selected it is far to small. Therefore I don`t believe the selection works.
I tried manually to put all the ranges selected by ABAP Routine in InfoPackage 2 in another InfoPackage 3 - the selection is identically to InfoPackage 2 (but not made via ABAP, but manually) and in Monitoring the selection looks absolutly alike.
But the manuall InfoPackage 3 selects far more records than InfoPackage 2.
I can`t understand the problem. Can you? Can you give me advice?
Thanks,
Angelika

ABAP routine for loading data of current month in InfoPackage

Hello experts,
I want to load data of current month. Therefore I implemented the following ABAP-Routine for field 0CALDAY in the InfoPackage's data selection:
data: lv_datum_l like sy-datum,
         lv_datum_h like sy-datum.
concatenate sy-datum(6) '01' into lv_datum_l.
call function 'RP_LAST_DAY_OF_MONTHS'
exporting
day_in = sy-datum
importing
last_day_of_month = lv_datum_h.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = lv_datum_l.
l_t_range-high = lv_datum_h.
But function 'RP_LAST_DAY_OF_MONTHS' cannot be found!
Any other suggestions for getting last day of current month?
regards
hiza

Hi,
Add this code. When u complete execution of this code, ZDATE will have ur month end date.
data : zdate_c(2) type c,
       zyear_c(4) type c,
       zmonth_c(2) type c.
data : zdate like sy-datum.
data : zday(2) type n.
zdate = sy-datum
      zyear_c = zdate(4).
      zmonth_c = zdate+4(2).
      zdate_c = '01'.
      concatenate zyear_c zmonth_c zdate_c into zdate.
      CALL FUNCTION 'FIMA_END_OF_MONTH_DETERMINE'
      EXPORTING
        I_DATE         = zdate
      IMPORTING
        E_DAYS_OF_MONTH = NO_OF_DAYS.
      zday = NO_OF_DAYS.
      concatenate zyear_c zmonth_c zday into zdate.

Abap Routine for Date selection in Infopackage

Hi
I have to write an abap routine for date selections in the infopackage,
There are two date begda and enda.
Do i code for BEGDA and fill in the begin date using routine and use another routine to fill the ENDA.
JPJP

Hi JP,
If you have two info objects BEGDA and ENDA in the Info package for selection
then you will have to write seperate routine for each of them.
If you want to give single value for each date field then update only the field l_t_range- low otherwise if you want to give range then you can update the internal table fields l_t_range-low and l_t_range-high .
Regards,
Prakash

InfoPackage ABAP Routine for Date Range - Only Start Date Extracted

I am using an ABAP Routine in an InfoPackage to select data for a 2 year period. The routine converts SY-DATUM into the Current Fiscal Year and Period, and then calculates the Starting and Ending Fiscal Year / Period of a 24 month period. The Start and End values are passed to the InfoPackage as l_t_range-low and l_t_range-high.
The Source and Target are both Basic Infocubes.
The InfoPackage executes successfully, and the Selection values on the Header tab of the monitor reflect a 24 month period. Unfortunately, on closer review of the data in the cube, only data for the first month appears to have been loaded. Im guessing that the extract was only performed with the From value, even though a To value was also provided.
I created a simple Infopackage and manually input the selection parameter values just to be sure I wasnt overlooking something. The InfoPackage performed as expected, loading more data which spanned the selection time period.
I can provide the code if it helps, but the fact that the monitor reflects a Start and End value suggests that the problem is with the InfoPackage, not the ABAP routine.
Has anybody ever experienced this before ? Any ideas would be greatly appreciated ?
Thanks,
Lyle

We can write ABAP routine in Infopackage with a range of values (From & To). Make sure you fill all the following information while building the final range information as below,
   l_s_range-sign    = 'I'.
   l_s_range-option = 'BT'.
   l_s_range-low     = lowvalue.
   l_s_range-high    = highvalue.
MODIFY l_t_range FROM l_s_range INDEX l_idx.
As you can see the key is passing the "BT" information for capturing range.
Hope it helps..
thanks
Kumar

Call function in abap routine of infopackage

Experts,
Good day. I have a problem concerning the data to be imported in my ods.I can't find a similar thread corcerning my problem. My File date field should contain only 2 years and 3months data of recent data. I'm using a call function fima_date_create to filter values of zfile_date.
CALL FUNCTION 'FIMA_DATE_CREATE'
EXPORTING
    I_DATE                             = sy-datum
    I_FLG_END_OF_MONTH   = ' '
    I_YEARS                          = 2-
    I_MONTHS                        = 3-
    I_DAYS                             = 0
    I_CALENDAR_DAYS          = 0
    I_SET_LAST_DAY_OF_MONTH       = ' '
IMPORTING
    E_DATE                             =
    E_FLG_END_OF_MONTH   =
    E_DAYS_OF_I_DATE         =
The sy-datum becomes the High value and the date generated by this FM will be the low value. I already tested this function module and it is what i want. How Should I write the ABAP code for this in the abap routine for my infopackage? Or what steps do I need to take.

Hi,
When you choose the option to write a routine for one of the characteristics in the infopackage selections, you get a window to write your code with some prewritten code as below. Modify it as shown below, for your requirement.
data: l_idx like sy-tabix.
read table l_t_range with key
     fieldname = 'CALDAY'.
l_idx = sy-tabix.
START of YOUR CODE
<----
Required logic -
>
L_T_RANGE-LOW = <lower limit of range>.
L_T_RANGE-HIGH = <upper limit of range>.
     L_T_RANGE-SIGN = 'I'.
     L_T_RANGE-OPTION = 'BT'.
END of YOUR CODE
modify l_t_range index l_idx.
p_subrc = 0.
Hope this helps.

ABAP routine in infopackage that runs function in ECC

Hi All
I need to have dynamic filter in the info package
I have program in ECC that brings me the value that I need to filter in my info packege
I want to use ABAP routine in infopackage that runs function in ECC and brings the value that was received from the ECC function
Is that possible?
Thanks

Hi All
my CTO found the following option
function module that is "remote-enabled module "
then you call CALL FUNCTION 'Y_FM_IDOC_CATSDB' DESTINATION 'SAP4.7E'
you need to define it in SM59
code example
data: BEGIN OF IT_SOBSL OCCURS 0,
      SOBSL(2),
      END OF IT_SOBSL.
DATA: ls_range type STANDARD TABLE OF rssdlrange WITH HEADER LINE.
SELECT /BIC/ZSPEPROCI FROM /BIC/SZSPEPROCI INTO TABLE IT_SOBSL
                      WHERE /BIC/ZSPEPROCI NOT BETWEEN 'AA' AND 'ZZ'
                      AND /bic/zspeproci ne '' .
BREAK-POINT.
LOOP AT IT_SOBSL.
ls_range-IOBJNM = 'SOBSL'.
ls_range-LOW = IT_SOBSL-SOBSL.
ls_range-SIGN = 'I'.
ls_range-OPTION = 'EQ'.
APPEND ls_range .
ENDLOOP.
loop at ls_range.
append ls_range to l_t_range.
endloop.

Make ABAP selection for InfoPackage

I am making a ABAP routine for a field on my info package. The field contains a date.
The constraint that I want to make is as follows:
select max( /BIC/FCVERDATE ) from /BIC/AAPO_O1000 into FCVERDATE.
But I am not sure how to make the constraint in the code:
data: l_idx like sy-tabix.
DATA: FCVERDATE LIKE /BIC/....
          read table l_t_range with key
               fieldname = '/BIC/FCVERDATE'.
          l_idx = sy-tabix.
          modify l_t_range index l_idx.
          p_subrc = 0.
Thanks in advance,
regards,
Torben

Solved
DATA: FCVERDATE LIKE /BIC/....
select max( /BIC/FCVERDATE ) from /BIC/AAPO_O1000 into FCVERDATE.
read table l_t_range with key
fieldname = '/BIC/FCVERDATE'.
l_idx = sy-tabix.
l_t_range-option = 'BT'.
l_t_range-low = FCVERDATE.
l_t_range-high = FCVERDATE.
modify l_t_range index l_idx.
p_subrc = 0.
I properly could have use 'EQ' instead of 'BT'.
Regards,
Torben

ABAP routine at Infopackage selection options

Dear all,
I need to write ABAP Routine at InfoPackage Selection Options.
Requirement is to bring only the versions (contains 2 characters) starting with 'C'.
Ex. I need versions CR, CP...
Code template is the following:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'VERSB'.
l_idx = sy-tabix.
modify l_t_range index l_idx.
p_subrc = 0.
Can anybody help me to resolve this?
Regards

Hi,
here is an example:
DATA: string(40) TYPE c.
CONCATENATE 'C' '%' INTO string.
SELECT *
FROM /bi0/hwbs_elemt
INTO TABLE lt_hwbs_elemt
WHERE nodename LIKE string.
Best regards,
Frank

ABAP ROUTINE AT INFOPACKAGE FOR DATE RANGE

hi all,
I want to Schedule my infopackge with selection options
0DATE infoobject with First date of current month( 01.02.2008) to last date of current month ( 29.02.2008).
this i have to get automatically bcoz i have to use this in process chain.
so I want to write a routine for this at the infopackage level with ABAP Routine -6 option.
So please suggest me how to write the code for this case.
thanks,
kiran manyam.

Hi Kiran,
Please paste the following code there and also check for syntax error.
data first_date type d.
data last_date type d.
first_date = sy_datum.
first_dat+6(2) = '01'.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
Exporting
DAY_IN = first_date
Importing
LAST_DAY_OF_MONTH = last_date.
          read table l_t_range with key
               fieldname = 'DATE'.
           if sy-subrc = 0.
               l_idx = sy-tabix.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               modify l_t_range index l_idx.
            else.
               move 'DATE' to l_t_range-fieldname.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               append l_t_range.
               endloop.
            endif.
          p_subrc = 0.

ABAP routine in Infopackage

I am in the process of creating an ABAP routine in the Infopackage to load current month based on system data from one cube in BW to another Cube in BW. I am getting the following error in the load. I am not an ABAPer and would appreciate if you can help or guide me with a sample code.
Here is the error.
For sel. field '/BIC/Z_APOSNAP', no selection with SIGN = ''; OPTION '' allowed.
Thank you
Neelu

Hi Neelu,
U can create a ABAP Routine of the type 6 (ABAP Routine),The field you are trying to populate is a select-option so you have to define both Sign and Option along with Low and High values.
As u want to load current month, from a system values , u can do it from sy-datum.
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = ''/BIC/Z_APOSNAP'.
            l_idx = sy-tabix.
            l_t_range-low =
            l_t_range-high =
            l_t_range-sign =
            l_t_range-option =
      modify l_t_range index l_idx.
          p_subrc = 0.
Just u can fill Sign as 'I' and Option 'EQ'.
Fill Low and High with values u get from System Data.
Hope this Helps,
Thanks,
Krish
**awarding points is way of saying thanks in SDN.

Need to write ABAP Routine at infopackage Selection Options

Hi All,
I need to write ABAP Routine at Info Package Selection Options.
Requiremnet i need to bring some Sales Document Types (Sales Orders Types) only from R/3.
Ex I need OrderTypes ZQT,ZSIV etc
Can any body help to resolve this.
Regards,
P.C.V.

Hi P.C.V,
If the order type field is already available in the Data Selection Tab of the InfoPackage, then you just need to place your selections there (e.g. order type = ZQT, ZSIV) without the need to use ABAP routines.
If ever you really need an ABAP routine, here is an example ABAP routine. The most important concept is to modify the range table l_t_range so that the selection reflect what you need.
data: l_idx like sy-tabix.
data: w_startdate like sy-datum,
      w_startweek like scal-week,
      w_maxdate like sy-datum,
      w_maxweek like scal-week.
w_startdate = sy-datum.
w_maxdate = w_startdate + 104 * 7.
* Calculate horizon for extraction
CALL FUNCTION 'DATE_GET_WEEK'
    EXPORTING
      DATE         = w_startdate
    IMPORTING
      WEEK         = w_startweek
    EXCEPTIONS
      DATE_INVALID = 1
      OTHERS       = 2.
CALL FUNCTION 'DATE_GET_WEEK'
    EXPORTING
      DATE         = w_maxdate
    IMPORTING
      WEEK         = w_maxweek
    EXCEPTIONS
      DATE_INVALID = 1
      OTHERS       = 2.
          read table l_t_range with key
               fieldname = 'CALWEEK'.
          l_idx = sy-tabix.
          l_t_range-sign = 'I'.
          l_t_range-option = 'BT'.
          l_t_range-low = w_startweek.
          l_t_range-high = w_maxweek.
          modify l_t_range index l_idx.

ABAP Routine at infopackage dataselection

I got one scenario to use ABAP Code.
In data selections we have CALWEEK.
We are loading to from flatfile to cube.Every week we load the data to cube.
If the flat file week=present week(sys week) then update to cube or else fail.

Hello,
In infopackage write the below routine for week selection.
data: l_idx like sy-tabix.
read table l_t_range with key
     fieldname = 'CALWEEK'.
l_idx = sy-tabix.
data: g_week type /BI0/OICALWEEK.
CALL FUNCTION 'DATE_GET_WEEK'
Exporting
     DATE = sy-datum
Importing
     WEEK = g_week.
l_t_range-iobjnm = '0CALWEEK'.
l_t_range-FIELDNAME = 'CALWEEK'.
l_t_range-sign = 'I'.
L_T_RANGE-OPTION = 'EQ'.
l_t_range-LOW = g_week.
modify l_t_range index l_idx.
p_subrc = 0.
Note: the above example is with reference to char 0CALWEEK.
Regds,
Shashank

Debug abap routine in infopackage

Hi experts,
What is the easiest way to debug an abap routine used in the infopackage for dynamic selection? When I go into the code I cannot place a breakpoint. Optionally I can do a /h before hitting the schedule button but what can I look for to go directly to my abap code?
mark

HI
Below is an excerpt from a reply by AHP few months back
put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
and when run infopackage, go to sm50,
on that process, menu program->debug program,
in debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps.
Regards
Prakash

ABAP routine for InfoPackage

Similar Messages

Maybe you are looking for