Abap routine to NOT to allow only one value

Hello Everyone,
I am trying to filter out one PO Number from WBS costs load. I wrote an abap routine as the data selection. The data source does not allow the 'NE'. Any suggestions?
Below is the code.
read table l_t_range with key
               fieldname = 'REFBN'.
          l_idx = sy-tabix.
         l_t_range-SIGN = 'I'.
         l_t_range-OPTION = 'NE'.
         l_t_range-low = '786587543'.
         modify l_t_range index l_idx.
          p_subrc = 0.

Hi Shilpa,
We had a similar problem..
The way we solved it was by loading by PO number..
Say if you want to skip PO number 5000,
Load first load using selection 1-4999 and second load from 5001-999999.
Hope this helps
Ashish

Similar Messages

Hi, am I right in thinking that the only iPads with a built in GPS are the cellular models not the wifi only ones?

hi, am I right in thinking that the only iPads with a built in GPS are the cellular models not the wifi only ones?
I am looking to purchase an iPad2 and need a built in GPS

Mini-education:
GPS signals are separate from and completely unrelated to both the Internet and the cellular telephone network. GPS signals come directly from the GPS satellites. They provide signals that allow GPS receivers to calculate latitude and longitude information. Navigation software then takes that latitude/longitude info and converts it to land mass, roads, bridges, highways, buildings, etc.
Most navigation software stores the maps right in the iPad/iPod/iPhone but a disadvantage is that the maps must be periodically updated (perhaps once every two years). The Internet is not required to use the system but it is required to update the maps.
Some navigation software gets the maps from the Internet and requires an Internet connection to function but an advantage is that the maps are always up-to-date.
The WiFi+3G/4G iPad and the iPhone both have a GPS receiver. The WiFi-only iPad and the iPod do not and these devices require an accessory.

Allow only one set of parameter values for all worksheets

I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
Any thoughts...
Thanks,
Jamie

Hi Jamie
Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
Which version of Discoverer are you using?
Best wishes
Michael

My imsg is not working with only one person and her imsg is working perfectly fine with her friends

My imsg is not working with only one person and her imsg is working perfectly fine with her friends

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
From Apple:
MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
Yes, a fix is coming soon.

Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks.

My Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks on the left side. I am running Lion. How do I get this to charge and turn on? Thanks

If your model Macbook Pro is the calibrating model, let the battery calibrate.
If not, and are still under warrant or have Apple Care, give them a call and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Request.getParameter("checkbox") Returns only one value

Hello Friends,
I have a very urgent problem on live site. I moved my project from jrun2.3.3 to Jrun 3.1 and I was using multiple select and checkboxes.
With Jrun3.1 if you select multiple select or multiple checkboxes it returns only one value instead of all the values.
Any help is hightly appreciated.

If multiple checkboxes have the same name, when selected and submitted, it will pass all values. But you will need to access those using getParameterValues("checkboxname") not getParameter("checkboxname"). The same goes for select elements.
Perhaps it was a bug in JRun 2.3.3 that allowed you to reference all parameter values using just the getParameter("xxx") method.

Allowing only ONE instance of a PDF to be open

I'm trying to work out a new system for proofreading and commenting in our business using the Comment and Markup tools in Acrobat 8 Professional. I'd like to allow multiple users on a network to interact and markup a PDF easily. I'd like to make it so that one of two things can happen:
a) Only one instance of a PDF can be opened at once on the same network. That is to say, if a user on one computer opens a PDF, another user on the network on a different computer cannot open that same PDF at all, until the first user has closed it. Also, I'm not sure if the functionality for this would be implemented in Acrobat or the operating system (Mac OS X 10.6, to be precise).
b) Multiple users can open a PDF simultaneously, and markups and comments from all users are somehow saved.
I'm sure it's more of a possibility for a) to happen, but perhaps I'm wrong. Anyway, I hope there is a solution out there! Thanks for all your help!

George,
Thank you for your helpful reply. It does appear that Shared Reviews is capable of providing our business exactly what we need in this regard. I have found that Acrobat 8 does support Shared Reviews, but it only does so with Network Folder locations and WebDAV folders as locations for comment servers. I know how to get to the process to set up Shared Reviews, but not how to designate or set up a folder as a comment server using Network Folders or WebDAV. Unless you just so happen to know about that process as well, I will post a new thread, since the problem of finding a solution has been solved, but the new problem of implementing it has risen.
Although using Acrobat X Pro to share PDFs and collaborate automatically using Acrobat.com sounds mighty tempting...

Search is not working for only one site collection

Hi All,
I have one issue where users are searching something on a site collection nothing is coming out. Search is working on web application level but not in only one site collection.
I checked the crawl log and found below error for this site collection

Hi Aditya,
From the error message, there might be several reasons:
Configure search time-out settings (Search Server 2010):
http://technet.microsoft.com/en-us/library/ee808892.aspx
Please check the user accounts created under the home group that could push the limit of the ACL, and this error message may be occur:
http://www.sweendog.net/blogengine/post/2012/02/03/The-Filter-Daemon-has-Timed-Out.aspx & http://sharepoint.stackexchange.com/questions/26755/sharepoint-2010-search-server-not-crawling-content-due-to-filter-daemon-timeout
Make sure the search service account has access to SearchIndex share:
http://www.sharepointsecurity.com/sharepoint/sharepoint-development/fixing-the-filter-daemon-did-not-respond-within-the-timeout-limit-error/
If the links above doesn’t help, please collect more error message in ULS log for troubleshooting.
Regards,
Rebecca Tu
TechNet Community Support

PDF file not generating for only one Invoice billing document

Hi all,
We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
Bug: Not possible to get output in pdf format for only one Invoice type(TR code: VF02) except for all it is generating PDF output.
Can anybody help me out to find the route cause for this problem.
Regards,
Murali.

Hi,
For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
So should i need to go through the Printer settings?
Regards,
Murali.

Why does the Error: 500 SC_INTERNAL_SERVER_ERROR appear when multiple users access my JSPs but does not occur when only one user accesses my JSPs?

When multiple users run my JSP application, why do some users get an Error: 500 SC_INTERNAL_SERVER_ERROR for certain JSP pages with the error message No such file or directory. The JSP listed on the Error 500 page varies and is not always the same. When only one user runs my JSP application, the problem does not occur?
The database connection is held when the user logs in or accesses certain parts of the JSP and then is immediately released. No connections to the database are held.
We are using Solaris 8 with MU_6 plus recommended patches.
Enterprise Ultra 250
iAS 6 SP 3

Is anything showing up in the KXS or KJS logs?
It sounds like you might having some kind of thread safety issue with your code. Either that or your guess about running out of database connections.

Mail does not work with ONLY ONE e-mail address

I am using mail with 6 different e-mail addresses all using godaddy as my mail server. Some(4) are imap, some(2) are pop3.
All of my e-mails work great except for 1 (which is imap). My iPhone and iPad as well as entourage all work for this e-mail address. It is only Mail that does nto work all the time.
This is the frustrating part. It works some times, and not others. No rhyme or reason to it. When it is not working, the only way to make it work right away is to delete the account and re-install the account. Some times, it will just start working on it's own. The worst part, is whenever I bring it in to a genius to look at it, it starts working, and of course, they say nothing is wrong.
Any thoughts on how to fix this???

Okay, it works the same way for me. I'm not sure whether "open all" will come back in that case, where there's only one bookmark. Does it slow down your workflow a lot to middle-click on the bookmark itself instead of on the folder?
Requests for feature changes get a bit lost here in the support forum. You can submit suggestions in one or more of the following ways:
(1) Feedback site: https://input.mozilla.org/feedback
(2) Developer mailing lists (sometimes hard to figure out which one is best): https://lists.mozilla.org/listinfo
(3) Bug tracking system (yours would be a request for enhancement): https://bugzilla.mozilla.org/ and https://developer.mozilla.org/docs/Mozilla/QA/Bug_writing_guidelines
With all the bookmark-related extensions out there, it's possible someone has posted one that adds this feature back, but I haven't searched.

Stacked Bar Not Showing With Only One Record

I have created a stacked bar chart using SQL Server Report Builder 3.0. When the recordset returns more than one record the graph presents correctly. When the recordset contains only one record nothing is displayed. This appears to be a
bug with the product though it is possible I am configuring something incorrectly. Wondering if anyone has had similar experiences or has any insights.
Thanks,
Nick
Nick

Hi Nick,
I create a simple report in my test environment. However, I cannot reproduce it.
Please refer to the following situation to troubleshooting this issue:
1. Please check if you have correct expression in the chart. And if you can query correct data in the dataset.
2. Please check line color of the chart. Make sure it is white.
3. If the field in the Values dialog box is not integer data type, we will lose data in the chart.
If the issue is persist, could you please post the screenshot about your chart design, and your dataset with sample data? It is benefit for us to do further analysis.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Imessage not working for only one contact all of a sudden

I can not recieve imessages from one contact. We have always been able to use imessage and just yesterday all of a sudden the only way we can text is if I turn imessage off. I can use imessage for everyone else and he can use imessage for everyone else, we just all of a sudden can't use it to text each other now.
I am reset my phone, deleted and added him again, and he has tried the same.

Hi,
On the Air, if you use the Apple Menu > About this Mac and then Click twice on the line that shows you the current OS version do you see the Serial Number ?
7:56 pm Friday; May 30, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Locking a JSP Page i.e allowing only one user to access it at a time

Hi,
I have web application where multiple users can log in at the same time.
I have a JSP where a user is presented with a list of executable items.It is quite possible that at the same time more that one user tries to execute the same item.I want to disable this. i.e at a time only one user should be able to execute the item.
Currently what i can think of is putting an extra column in the database...saying that this item is locked and you cannot access it until unlocked.But then this would involve a round trip to database.I want to avoid it, and do some coding in java code itself.
But i dont know how to proceed.
Any Help......

sorry for the misdirection :(
yes..try using the synchronizing for the run process for of the item in the action class.
I shall try to provide you with the code changes, if can you please provide the back end code doing the job u said

Allow only one IP ADDRESS from a web service call

Hi gurus,
i'm working in an ECC 6.0 with stack18 (SOAMANAGER tcode).
I have defined a new web service definition (with SE80 tcode) and i see it in SOAMANAGER tcode.
I have to limit to one ip address when 3rd party client invoke it; it's possible to do this with an authorization object or by some SOAMANAGER value filled in order to have only one ip address invoked.
Thank's in advance.
Maurizio Ortolani

Hi,
Did you resolve your problem Because We want to implement the same functionality in our SAP Landscape.
Thanks in advance.
Thanasis

Abap routine to NOT to allow only one value

Similar Messages

Maybe you are looking for