ABAP Runitme Errors (SAPBATCH - CALL_FUNCTION_CONFLICT_LENG,SAPBATCH - CALL
Hi Friends,
For the last few weeks we have been receiving the same runtime errors when I perform the daily checks
SAPBATCH - CALL_FUNCTION_CONFLICT_LENG
SAPBATCH - CALL_FUNCTION_UC_STRUCT
Please help me if any one have idea and is this something we need to be concerned about?
Best Regards,
Vinod
Sorry for the delay in response...I'm sure that program is sap batch only..please find the first page of two dumps.
Dump(1):
Runtime Error CALL_FUNCTION_CONFLICT_LENG
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time 02.06.2008 04:53:15
ShrtText
Type conflict when calling a function module (field length).
What happened?
Error in ABAP application program.
The current ABAP program "/SDF/SAPLRI_SQLSERVER" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
A function module was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator. You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
is especially useful if you want to keep a particular message.
Dump(2) First page:
Runtime Error CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time 02.06.2008 04:53:14
ShrtText:
A type conflict occurred when structure parameters were passed in the.
What happened?
Error in ABAP application program.
The current ABAP program "/SDF/SAPLRI_SQLSERVER" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator. You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
is especially useful if you want to keep a particular message.
Please let me know if required further information.
Best Regards,
Vinod
Similar Messages
-
Why do we call an ABAP Runtime error a "Short Dump"
Hi All,
I was just working on one of the ABAP runtime errors with my technical counterpart and a question came to my mind "Why do we call an ABAP Runtime error a "Short Dump"?".
I tried asking a few friends of mine working in the technical space in SAP and they were not able to answer.
So, some one of you experts help me getting answer to this question.
Thanks in Advance.
Nitin.ABAP Runtime error is a generalized term .......... meaning the error occured while runtime.
wheare as short dump.
Short - means brief.
dump - error information from the memory
Short dumps (also called ABAP memory dumps). Short dumps occur when an ABAP program fails.
Short dumps provide basic information about which program failed and what the error was.
hope this helps. -
ABAP Runtime Error while executing planning folder
Hi experts.
We have a situation where I can access our planning folders but that's not the case for one of our user. She encountered with an ABAP Runtime Error as follow:
Appreciate if anyone can help me out with this.
Runtime Error RAISE_EXCEPTION
Date and Time 20.04.2007 16:50:23
ShrtText
Exception condition "X_MESSAGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLRSSBR" raised the exception
condition "X_MESSAGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Cancel
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLRSSBR" or "LRSSBRU03"
"RSSB_AUTHORITY_IOBJVL_CHECK"
or
"SAPLRSSBR" "X_MESSAGE"
or
"UPB_PM_CUST_START " "X_MESSAGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "S53KJ165"
Network address.......... "10.1.53.165"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C3A11F4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "S53KJ170"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:42:11"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 16759712
Heap..................... 0
Page..................... 57344
MM Used.................. 10079624
MM Free.................. 2487240
SAP Release.............. "640"
User and Transaction
Client.............. 350
User................ "S51643"
Language key........ "E"
Transaction......... "UPSPL "
Program............. "SAPLRSSBR"
Screen.............. "SAPLUPB_PM_ALV 1000"
Screen line......... 2
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ".
The termination occurred in line 416 of the source code of the (Include)
program "LRSSBRU03"
of the source code of program "LRSSBRU03" (when calling the editor 4160).
Source Code Extract
Line
SourceCde
386
l_s_range-low = l_activity.
387
APPEND l_s_range TO l_sx_auth_check_detail-range.
388
INSERT l_sx_auth_check_detail INTO TABLE <l_sx_auth_check>-auth_check_detail.
389
390
CALL FUNCTION 'RSSB_AUTHORITY_IOBJVL_REDUCED'
391
EXPORTING
392
i_infocube = g_sx_iobjvl_check-infocube
393
i_uname = l_uname
394
i_th_hierarchy = g_sx_iobjvl_check-hierarchy
395
i_message = i_message
396
i_activity_force_check = i_activity_force_check
397
CHANGING
398
c_tsx_auth_check_detail = <l_sx_auth_check>-auth_check_detail
399
c_tx_no_auth = l_tx_no_auth
400
c_ts_auth_tlevel = e_ts_auth_tlevel
401
EXCEPTIONS
402
user_not_authorized = 1
403
auth_check_failure = 2
404
auth_check_error = 3
405
inherited_error = 4
406
x_message = 5.
407
IF sy-subrc = 0.
408
REFRESH l_tx_no_auth.
409
CR 20050826 HW873685 SP29 Part 2/3 begin
410
SY-SUBRC = 2 means Auth-Obj missing in users profiles, we need this later
411
ELSEIF sy-subrc = 2.
412
ao_missing = rs_c_true.
413
e_subrc = 2.
414
CR 20050826 HW873685 SP29 Part 2/3 end
415
ELSEIF sy-subrc = 5.
>>>>>
RAISE x_message.
417
ELSE.
418
e_subrc = 2.
419
ENDIF.
420
421
correct the kid now
422
LOOP AT l_tx_no_auth INTO l_sx_no_auth.
423
l_sx_no_auth-kid = <l_sx_auth_check>-kid.
424
APPEND l_sx_no_auth TO e_tx_no_auth.
425
ENDLOOP.
426
427
ENDLOOP.
428
429
End LOOP: Check all SUBNR (FEMS)
430
431
432
CR 20050826 HW873685 SP29 Part 3/3 begin
433
If an Auth-Obj. is missing, no SUBNR can be authorized. Due to OLAP-logic
434
this means empty no_auth table
435
IF ao_missing = rs_c_true.
Contents of system fields
Name
Val.
SY-SUBRC
5
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
210
SY-UCOMM
SELECT
SY-TITLE
Execute All Cost Element
SY-MSGTY
E
SY-MSGID
R7
SY-MSGNO
057
SY-MSGV1
0CO_AREA
SY-MSGV2
A
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
40 FUNCTION SAPLRSSBR LRSSBRU03 416
RSSB_AUTHORITY_IOBJVL_CHECK
39 FORM SAPLRSDRC LRSDRCF15 113
AUTHORITY_CHECK
38 FORM SAPLRSDRC LRSDRCF27 57
BASIC_QUERY_DATA_GET_ROLAP
37 FUNCTION SAPLRSDRC LRSDRCU05 44
RSDRC_BASIC_QUERY_DATA_GET
36 FUNCTION SAPLRSDRC LRSDRCU15 189
RSDRC_BASIC_CUBE_DATA_GET
35 FORM SAPLRSDRC LRSDRCF25 373
DATA_GET
34 FUNCTION SAPLRSDRC LRSDRCU02 249
RSDRC_CUBE_DATA_GET
33 FUNCTION SAPLRSDRI LRSDRIU01 352
RSDRI_INFOPROV_READ
32 FORM /1SEM/UPCBW_350TMWPA01 UPC_BWINTERFC__FIX 174
DATA_READ
31 FUNCTION SAPLUPCBW LUPCBWU06 56
UPC_BW_DATA_READ
30 FUNCTION SAPLUPC1 LUPC1U06 67
UPC_DATA_READ
29 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ_DB 25
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA_INTERNAL~READ_DB
28 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_GET 167
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~GET
27 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_READ 5
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~READ
26 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ 46
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA~READ
25 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 395
READ_TRANSACTION_DATA
24 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 561
GET_DATA
23 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 800
EC500_SELECT_DATABASE
22 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 575
SELECT_DATABASE
21 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 464
SELECT_AND_FIND_HEADER_COMBI
20 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 217
LOGICAL_SCREEN_FILL_HEADER
19 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 60
LOGICAL_SCREEN_FILL
18 FUNCTION SAPLUPP_PP_KERNEL LUPP_PP_KERNELU01 114
UPP_PP_KERNEL_CONSTRUCTOR
17 METHOD CL_UPB_PL_ALV=================CP CL_UPB_PL_ALV=================CM01E 176
CL_UPB_PL_ALV=>CONSTRUCTOR
16 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 623
OUTPUT_CREATE
15 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 202
OUTPUT_INIT
14 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1062
OUTPUT_PROCESS
13 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1225
OUTPUT_SWITCH_TO_LAYOUT
12 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF05 748
INIT_CONTROLS
11 MODULE (PBO) SAPLUPB_PM_ALV LUPB_PM_ALVO01 13
STATUS
10 FUNCTION SAPLUPB_PM_ALV LUPB_PM_ALVU01 24
UPB_PM_ALV_START
9 METHOD CL_UPB_PM_APPLC===============CP CL_UPB_PM_APPLC===============CM00A 88
CL_UPB_PM_APPLC=>EXECUTE_PM
8 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 76
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
7 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 23
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
6 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM003 121
CL_UPB_PM_ADMIN=>PAI
5 FORM SAPLUPB_PM LUPB_PMF04 80
USER_COMMAND_0210
4 MODULE (PAI) SAPLUPB_PM LUPB_PMI04 11
USER_COMMAND_0210
3 FUNCTION SAPLUPB_PM LUPB_PMU22 86
UPB_PM_MAIN
2 FORM UPB_PM_CUST_START UPB_PM_START_ADMIN 251
PM_START
1 EVENT UPB_PM_CUST_START UPB_PM_START_ADMIN 14
START-OF-SELECTION
Chosen variables
Name
Val.
No. 40 Ty. FUNCTION
Name RSSB_AUTHORITY_IOBJVL_CHECK
I_ACTIVITY
03
33
03
I_ACTIVITY_FORCE_CHECK
2
0
I_MESSAGE
X
5
8
I_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
I_UNAME
S51643
533333222222
351643000000
E_SUBRC
0
0000
0000
E_TS_AUTH_TLEVEL
Table[initial]
E_TX_NO_AUTH
Table[initial]
RSSB_C_AUTH_KEYFIGURE
1KYFNM
3454442222
1B96ED0000
SY-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
SYST-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
%_SPACE
2
0
RS_C_RANGE_SIGN
IE
44
95
SY-SUBRC
5
0000
0005
L_TX_NO_AUTH
Table[initial]
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
SYST
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ###################################################à##############
0000000000000000000000000002000000000000000000000000000000000000000000000000000E00000000000000
0001000000000000000000000000000000000000000000010001000000010000000000000000000000000000000000
L_SX_NO_AUTH
############ÿÿÿÿ
000000000000FFFF
000000000000FFFF
L_SX_NO_AUTH-KID
Table[initial]
<L_SX_AUTH_CHECK>-KID
Table IT_33029[1x4]
FUNCTION-POOL=RSSBRDATA=G_SX_IOBJVL_CHECK-AUTH_CHECK[1]-KID
Table reference: 2052
TABH+ 0(20) = 07000000908D2FD0000000000000000000000000
TABH+ 20(20) = 00000804000081050000000100000004FFFFFFFF
TABH+ 40(16) = 040002F1000003480001432821000000
store = 0x07000000908D2FD0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 2052 (0x00000804)
label = 33029 (0x00008105)
fill = 1 (0x00000001)
leng = 4 (0x00000004)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000003
occu = 1 (0x00000001)
access = 2 (ItAccessSorted)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 5 (cmpSingle)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908E0CC8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x00000001)
lineAlloc = 1 (0x00000001)
store_id = 6998 (0x00001B56)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
No. 39 Ty. FORM
Name AUTHORITY_CHECK
I_TH_SFC
Table IT_32090[14x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFC
Table reference: 1757
TABH+ 0(20) = 070000009052D8F8070000009081372800000000
TABH+ 20(20) = 000006DD00007D5A0000000E00000080FFFFFFFF
TABH+ 40(16) = 040002DB000017C80010839401000000
store = 0x070000009052D8F8
ext1 = 0x0700000090813728
shmId = 0 (0x00000000)
id = 1757 (0x000006DD)
label = 32090 (0x00007D5A)
fill = 14 (0x0000000E)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000099
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090811F18
pghook = 0x0000000000000000
idxPtr = 0x070000009052D950
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6872 (0x00001AD8)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813588
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
CL_RSO_REPOSITORY=>P_C_BAL_LOG_SUBOBJEC_INST
SY-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_S_RANGE-LOW
1ROWCOUNT
354544545222222222222222222222222222222222222222222222222222
12F73F5E4000000000000000000000000000000000000000000000000000
<L_S_SFK>-KYFNM
1ROWCOUNT
354544545222222222222222222222
12F73F5E4000000000000000000000
RSDRC_C_QUERYMODE-CUMULATIVE
C
4
3
S_S_COB_PRO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_SX_SELDR-RANGE+8(8)
Table IT_32110[2x136]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_SX_SELDR
Table reference: 1902
TABH+ 0(20) = 0700000090813D10000000000000000000000000
TABH+ 20(20) = 0000076E00007D6E0000000200000088FFFFFFFF
TABH+ 40(16) = 040002DB00001AA00010254421000000
store = 0x0700000090813D10
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1902 (0x0000076E)
label = 32110 (0x00007D6E)
fill = 2 (0x00000002)
leng = 136 (0x00000088)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000112
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 2 (table_line)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908800F8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6876 (0x00001ADC)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_S_RANGE
IEQ1ROWCOUNT
4453545445452222222222222222222222222222222222222222222222222222222222222222222222222222222222
95112F73F5E40000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_TSX_SELDR
Table IT_32094[13x120]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TSX_SELDR
Table reference: 1870
TABH+ 0(20) = 0700000090813AE007000000908DF36800000000
TABH+ 20(20) = 0000074E00007D5E0000000D00000078FFFFFFFF
TABH+ 40(16) = 040002DB000018A8000C4B9C01000000
store = 0x0700000090813AE0
ext1 = 0x07000000908DF368
shmId = 0 (0x00000000)
id = 1870 (0x0000074E)
label = 32094 (0x00007D5E)
fill = 13 (0x0000000D)
leng = 120 (0x00000078)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000103
occu = 12 (0x0000000C)
access = 2 (ItAccessSorted)
idxKind = 1 (ItIndexLinear)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 3 (cmpSingleMcmpU)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000009087FB40
pghook = 0x0700000090813D68
idxPtr = 0x0700000090813DA0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 36 (0x00000024)
lineAlloc = 36 (0x00000024)
store_id = 6875 (0x00001ADB)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x07000000908DED00
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_SX_SELDR
00001KYFNM ########300 0 ####ÿÿÿÿ#### 0 ######## ####ÿÿ
333334544422222222222222222222222222000000003332223222220000FFFF0000223200000000222222220000FF
00001B96ED00000000000000000000000000000000003000000000000000FFFF0000000000000000000000000000FF
G_RUNNING
0
0000
0000
L_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
L_TH_FREE
Table IT_32093[6x30]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TH_FREE
Table reference: 1763
TABH+ 0(20) = 0700000090813760000000000000000000000000
TABH+ 20(20) = 000006E300007D5D000000060000001EFFFFFFFF
TABH+ 40(16) = 040002DB00001B800010831401000000
store = 0x0700000090813760
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1763 (0x000006E3)
label = 32093 (0x00007D5D)
fill = 6 (0x00000006)
leng = 30 (0x0000001E)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000116
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908137B8
pghook = 0x0000000000000000
idxPtr = 0x07000000908139B0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6874 (0x00001ADA)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_ACTIVITY
03
33
03
SY-UNAME
S51643
533333222222
351643000000
S_MULTICUBE
222222222222222222222222222222
000000000000000000000000000000
E_SUBRC
0
0000
0000
%_VIASELSCR
0
4
S_CHANM
222222222222222222222222222222
000000000000000000000000000000
I_RAISE_EXCEPTION
X
5
8
RS_C_TRUE
X
5
8
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FORM
Name BASIC_QUERY_DATA_GET_ROLAP
E_T_DATA
Table[initial]
E_END_OF_DATA
2
0
C_FIRST_CALL
X
5
8
S_S_QPARAM
XX 0 ##ÿÿÿÿ####DB-VIEW R ###dABAP-TABLE
25523200FFFF0000442544522222222222222222222222222222222222222222222222520006444525444422222222
08800000FFFF000042D6957000000000000000000000000000000000000000000000002000041210D412C500000000
C_S_QPARAM-AUTHORITY_CHECK
R
5
2
RSDRC_C_AUTHCHK-NONE
2
0
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RSD_C_DPANM
0REQUID 0CHNGID 0RECORDTP 0IOB
3545544222222222222222222222223444444222222222222222222222223544454552222222222222222222223444
025159400000000000000000000000038E794000000000000000000000000253F244000000000000000000000009F2
SPACE
2
0
I_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
I_TH_SFC
Table IT_32090[14x128]
I_TH_SFK
Table IT_32091[2x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFK
Table reference: 1767
TABH+ 0(20) = 0700000090887AC00700000090813CD800000000
TABH+ 20(20) = 000006E700007D5B0000000200000080FFFFFFFF
TABH+ 40(16) = 040002DB000018380010839421000000
store = 0x0700000090887AC0
ext1 = 0x0700000090813CD8
shmId = 0 (0x00000000)
id = 1767 (0x000006E7)
label = 32091 (0x00007D5B)
fill = 2 (0x00000002)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000101
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090884C90
pghook = 0x0000000000000000
idxPtr = 0x0700000090827A98
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6857 (0x00001AC9)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813B38
hsdir = 0x0000000000000000Have you check or trace Authorization??
In DUMP:
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ". -
ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N
Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors LOAD_TYPE_VERSION_MISMATCH
Date and Time 10.02.2011 11:13:07
Short text
Change of a Dictionary structure at runtime of a program.
What happened?
Runtime error
The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
terminated because one
of the statements could not be executed at runtime.
What can you do?
Restart the program.
If the error persists, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
changed
during the flow of the transaction.
As the type was already used in the old version
and in the new type should be used in the same transaction in the new
version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
Try to restart the program.
System environment
SAP-Release 700
Application server... "iqe"
Network address...... "172.25.0.85"
Operating system..... "Linux"
Release.............. "2.6.9-55.ELsmp"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "iqe"
Database type..... "ORACLE"
Database name..... "IQE"
Database user ID.. "SAPSR3"
Terminal................. "MUMJML5727"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Dec 26 2010 20:17:07"
create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
The termination occurred during generation of the ABAP/4 program
"CL_IM_WRF_MM_PROC_PO==========CP".
The termination occurred in line 213
of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
calling the editor 2130).
Source Code Extract
Line SourceCde
183 DATA: l_flag TYPE wrf_pbas_boolean.
184
185 CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186 IMPORTING
187 e_preview_flag = l_flag.
188
189 IF NOT l_flag IS INITIAL.
190
191 DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193 MOVE im_header ?TO l_header.
194
195 CALL METHOD l_header->if_output_mm~preview( ).
196
197 CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 ** CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 ** EXPORTING
202 ** im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 * CALL METHOD l_header->if_output_mm~overview( ).
207 * CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209 ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
The termination was triggered in function "ab_RxDdicStruShareFailed"
of the SAP kernel, in line 2539 of the module
"//bas/700_REL/src/krn/runt/abtypload.c#11".
The internal operation just processed is " ".
Internal mode was started at 20110210111306.
Name of the changed type......: "WRF_POHF_KOMP_STY"
New version of the type.......: 20070508193207
Old version of the type.......: 20070508193207
New user......................: "Type" "WRF_POHF_KOMP_STY"
Version of the new user.......: 20070508193207
Old user......................: "???" "???"
Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKKread this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system. -
ABAP dump Error while creating service order in PCUI.
Hi Experts,
We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors RAISE_EXCEPTION
Date and Time 02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
| function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj PatilHi Thirumala,
Thnaks for the reply.
I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil -
Getting ABAP runtime error while doing MIGO-GR against PO.
Hi,
Getting ABAP runtime error message while doing GR against PO.
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
63 * Optische Archivierung
64 * Spaete Erfassung mit Barcode
65 * Redesign of barcode handling -> note 780365
66 PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67 xmkpf-mjahr
68 barcode.
69
70 MOVE-CORRESPONDING xmkpf TO emkpf.
71 CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72 EXCEPTIONS
73 error_message = 4.
74 MOVE-CORRESPONDING xmkpf TO emkpf.
75 CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76 EXCEPTIONS
77 error_message = 4.
78 IF NOT sy-subrc IS INITIAL.
Any pointers
Code Formatted by: Alvaro Tejada Galindo on Jan 14, 2010 6:00 PMHi ,
Any inputs
for this error
No RFC destination is defined for SAP Global Trade Services
Regards
Ashu -
ABAP RunTime Error for tcode : TS01
Hi Friends,
Actually we are getting the run time error while creating the standard security transaction using TS01.
After entering the data in the first screen -- click on the enter -- enter the details inside & click on save button--then it will go run time error.
Here while calling the method, we are getting the run time error.
call method cl_class_position_op_trs=>trs_flows_calculate_tax
exporting
im_tab_flow = L_TAB_FLOWS
im_company_code = l_company_code
im_security_account = l_security_account
im_security_id = l_security_id
receiving
re_tab_flow = RE_TAB_FLOWS
exceptions
failed = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
RAISING FAILED.
endif.
Actuallly here the problem with the class becuase the class cl_class_position_op_trs itself has error.
In the class , in the local classes they are calling again the class cl_class_position_op_trs. becasue of this reason it was going to run time error.
So we are getting the run time error.
We have OSS note for the same problem.But i am unable to implement that.
Please guide me how to implement the OSS note 751947.(Note 751947 - TRS: Syntax error due to ABAP Compiler)
please find the error details:
Runtime Errors SYNTAX_ERROR
Occurred on 03/12/2008 at 00:26:57
Syntax error in program "CL_CLASS_POSITION_OP_TRS======CP ".
What happened?
The following syntax error occurred in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Error in ABAP application program.
The current ABAP program "CL_CLASS_POSITION_TRS=========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLASS_POSITION_OP_TRS======CP
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion date.
Error analysis
The following syntax error was found in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Regards.
Lakshmi
Edited by: lakshmi podile on Mar 14, 2008 8:08 AMDid you go through the steps in the note?
Use transaction SE24 to distribute the local classes into new include structures as follows:
Call transaction SE24 for the class CL_CLASS_POSITION_OP_TRS.
Select the following menu option:
Goto --> Class-local types --> Local Class Definitions/Types
Confirm the message that proposes conversion into the new structures.
Choose Utilities --> Regenerate sections from the menu.
Activate the class and all changed objects.
Try and do this, and see what happens.
Good luck. -
I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
How to get error message in BAPI call when error occurs?
I can catch an exception in BPM but I need to get error message and send it to another system.Hi Denis,
>>>I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
if you want to use fault messages
consider using ABAP Proxies
>>>>How to get error message in BAPI call when error occurs?
most bapis have return table in which they
return error messages (you can do it either
in a sync way or in an async way if the call is too long - with corrlelation of course)
Regards,
michal -
ABAP Runtime Error at the time of saving of Document Through CV01N tcode
Dear Experts
We have install seprate DMS Server for storing various documents of different module.
While saving of Document through Transaction CV01N one small screen gets pop up.Which is as follows
Check in Document:KPro
Storage Category Description
ZCITY123 DMS
I am selecting above line from Kpro, then when i click on save system gives ABAP Runtime Error.
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 21.10.2008 18:35:26
Short text
Function module "PROJECT SYSTEM" not found.
What happened?
The function module "PROJECT SYSTEM" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLSDCE" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
I am not understanding why this dump is coming.
How i can come up from this issue.Pls guide me.If any customizing is required pls give the steps
Thanks in Advance.
Regards,
Sandeep TheurkarThere is a programming error somewhere.To get a solution quickly, do as follows:
1. Turn off all badi's, user exits and whatever you have changed in standard SAP.
2. Rerun - if it still fails - search in SAP notes for relevant notes
3. If it doesnt fail - you have an error in your own programming
4. If you are on relevant Support packages etc, send a message to SAP.
Regards,
Espen Leknes -
Reg : Daily i got 120 ABAP Runtime Error with in 40 Mins(Early Morning)
Dear Friends,
I got following errors regularly. when i run t.code RSBTCDEL and RSSNAPDL. what can i do? then Regularly morning i got same morethan 120 Error. User is SAPSYS 000 Client. How can avoid this type of ABAP Runtime Error.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 10.06.2009 15:04:23
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "[601] Could not continue scan with NOLOCK due to
data movement."
Internal call code.........: "[RSQL/FTCH/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLBTCH" or "LBTCHF19"
"EXECUTE_BP_JOB_SELECT"
If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System u2192 List u2192 Save u2192 Local File u2192 (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21. Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File-(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which actions and input led to the error. The exception must either be prevented, caught within proedure
"EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
in the RAISING clause of the procedure. To prevent the exception, note the following:
Client.............. 400
User................ "BASIS"
Language key........ "E"
Transaction......... "SE38 "
Transactions ID..... "D7A155DEA42EF1EEB52A000423BF7C3A"
Program............. "SAPLBTCH" ( Run a Sap Standard Report RSBTCDEL)
Screen.............. "SAPMSSY0 1000"
Regards
keshavHi Juan,
My System is
ECC 6.0
Database : MS SQL Server 2005
OS - Windows 2003 server
SAP Patches level is Basis - SAPKB70016
ABAP - SAPKA70016
Kernel patch level - 185
when i has update the kernel patches after only i got this error morethan 120 like early morning 4.40 AM to 5.18 AM regularly. what can i do?
Regards
keshav -
Hi All,
I am running GRC 10.0 SP07 when trying to add a response to a risk I get the following ABAP programming error,
Category ABAP Programming Error
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
ABAP Program CL_GRFN_FPM_UTIL==============CP
|
| Access via 'NULL' object reference not possible.
You attempted to use a 'NULL' object reference (points to 'nothing')
| access a component (variable: " ").
| An object reference must point to an object (an instance of a class)
| before it can be used to access components.
| Either the reference was never set or it was set to 'NULL' using the
| CLEAR statement.
Any help on the error would be greatly appreciated.
Thanx
WarrenHi Victor,
When I am on a risk in NWBC, I select the "Response Plan" Tab, then when I try create a response I get the error.
This is the error that is displayed:
Error while processing your query
What has happened?
The URL call http://ravenclaw.cqs.co.za:8000/sap/bc/webdynpro/SAP/GRRM_WD_RNP was terminated because of an error.
Note
The following error text was processed in system GRC : Access via 'NULL' object reference not possible.
The error occurred on the application server ravenclaw_GRC_00 and in the work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_OIF_INFO of program CL_GRFN_FPM_UTIL==============CP
Method: GET_INSTANCE of program CL_GRFN_OIF_BASE==============CP
Method: INIT_UIBB of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: IF_COMPONENTCONTROLLER~INIT_UIBB of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: HANDLEDEFAULT of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Thanx
Warren -
UNCAUGHT_EXCEPTION is the ABAP Runtime error
Hi all,
Our Production System BI7.0 with oracle 10g running on Unix . The UNCAUGHT_EXCEPTION is the ABAP Runtime error exists in ST22.
Please find the Error analysis from ABAP Dump of UNCAUGHT_EXCEPTION.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_SDB_ORA_PROGRAM_ERROR', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
An error occurred in the program:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SQL_EXCEPTION", which was raised in the program
"CL_SQL_STATEMENT==============CP",
specifically in line 31 of the (include) program
"CL_SQL_STATEMENT==============CM002".
The cause of the exception was:
ORA-04031: unable to allocate 62208 bytes of shared memory ("shared
pool","DBMS_STATS","PL/SQL MPCODE","BAMIMA: Bam Buffer")#ORA-06508: PL/SQL:
could not find program unit being called: "SYS.DBMS_STATS"#ORA-06512: at line 1
Thanx,
PeterHi Peter,
You shared pool might be too small
Read,
SAP Note 869006 - Composite SAP note: ORA-04031
Regards
Juan -
Error with Asynchronous RFC call to JDBC
Hi all,
We are working on a scenarion where in we have to make an asynchronous RFC call to JDBC.
We have configured RFC sender adapter following this weblog
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
We have created data types only for the database as RFC does not require any data types.
And also we have created message types,message interfaces accordingly.
In Message Mappping,we mapped the export parameters of RFC to the access fields of database message type.
Also we have created sender agreement,interface determinations etc.... accordingly
And for sending RFC request asynchronously we followed this weblog
/people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
Once done with all the above steps we could able to trigger the RFC call and caught with the following errors in SXMB_MONI and no errors are seen in communication monitoring
SOAP Error:
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>+
+- <!-- Request Message Mapping+
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_curr_exg_mm2_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" /> <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_curr_exg_mm2_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Also trace shows the following error thogh the interface determinations are properly configured
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface BAPI_EXCHRATE_GETCURRENTRATES*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:rfc:functions</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
the above errors are shown as part of request mapping..
Can any one please let me know what other configurations do we need to do?
I did not map the RFC import parameters,do we need to do that
Any help in this regard is really appreciated
Rgds,
SanthoshHi,
I am really happy to hear that the problem with mapping is resolved.
Now as per your requirment It needs to be aynschornous RFC--> XI ---> JDBC call. In XI you should map the RFC Export parameters to the traget structure of JDBC.
then the question is to how to trigger the RFC Function Module in R/3 to XI.
Plesae follow below steps to trigger it from SAP R/3
1. Create a RFC in the R/3 system
2. Configure the SM59 and Sender Communication channle as given in the Michal's blog. Also test if it is succesful.
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
3. Import the RFC in XI
4. Do the mapping to the target strucutre
5. Configure the JDBC receiver adapter
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
6. You can trigger the RFC from R/3 sytem by using
Async Call - in ABAP program use below syntax to call RFC. Here the export parameters will be passed on to XI which further have mapped to JDBC.
CALL Function "RFC Name" IN BACKGROUND TASK destination <sm59 destination>
COMMIT WORK.
Sync Call
CALL Function "RFC Name" destination <sm59 destination>
Thanks
Swarup
Edited by: Swarup Sawant on Jan 27, 2008 9:14 AM -
ABAP Runtime Error CONVT_NO_NUMBER
Dear all,
I am calling transaction F-02 for posting G/L Account from an FM. I tried with the Header Data and Account and Cost Centre but it says ABAP Runtime Error CONVT_NO_NUMBER. I undersood that its because of the Number interpretation and coded accordingly but still it throws the same error.
Can you please help me in this....
With Regards
JayDear all,
Thanks for giving me some hope. I tried the possiblities but still it says the same error. I have pasted the FM in nutshell. Can you please see that and help me.
FUNCTION ZUPLOAD_XLS.
""Local interface:
*" IMPORTING
*" REFERENCE(P_BUKRS) LIKE BKPF-BUKRS
*" REFERENCE(P_BLDAT) LIKE BKPF-BLDAT
*" REFERENCE(P_BUDAT) LIKE BKPF-BUDAT
*" REFERENCE(P_MONAT) LIKE BKPF-MONAT
*" REFERENCE(P_WAERS) LIKE BKPF-WAERS
*" REFERENCE(P_BKTXT) LIKE BKPF-BKTXT
*" TABLES
*" IN_JE_XLS STRUCTURE ZFGI_JE_STR
ITAB-BSCHL = 40.
ITAB-SAKNR = '812070'.
ITAB-WRBTR = '30881.00'.
ITAB-KOSTL = '11620009'.
APPEND ITAB.
MOVE P_BUDAT(4) TO TEM+4(4).
MOVE P_BUDAT+4(2) TO TEM(2).
MOVE P_BUDAT6(2) TO TEM2(2).
MOVE P_BUDAT(4) TO TEM+4(4).
MOVE P_BUDAT+4(2) TO TEM(2).
MOVE P_BUDAT6(2) TO TEM2(2).
MOVE P_BLDAT(4) TO TEM1+4(4).
MOVE P_BLDAT+4(2) TO TEM1(2).
MOVE P_BLDAT6(2) TO TEM12(2).
MOVE P_BLDAT(4) TO TEM1+4(4).
MOVE P_BLDAT+4(2) TO TEM1(2).
MOVE P_BLDAT6(2) TO TEM12(2).
WRITE ITAB-WRBTR TO WRBTR.
CONDENSE WRBTR NO-GAPS.
WRITE ITAB-BSCHL TO T_BSCHL NO-GROUPING LEFT-JUSTIFIED.
IF ITAB-KOSTL+8(2) EQ SPACE.
MOVE ITAB-KOSTL TO HOLD_KOSTL+2(8).
MOVE '00' TO HOLD_KOSTL(2).
ELSE.
MOVE ITAB-KOSTL TO HOLD_KOSTL.
ENDIF.
FIELD_LENGTH = STRLEN( ITAB-SAKNR ).
IF FIELD_LENGTH EQ 10.
MOVE ITAB-SAKNR TO HOLD_SAKNR.
ELSE.
MOVE ITAB-SAKNR(6) TO HOLD_SAKNR+4(6).
MOVE '0000' TO HOLD_SAKNR(4).
ENDIF.
PERFORM NEW_DYNPRO USING 'SAPMF05A' '0100'.
PERFORM NEW_FIELD USING 'BKPF-BUDAT' TEM.
PERFORM NEW_FIELD USING 'BKPF-BLDAT' TEM1.
PERFORM NEW_FIELD USING 'BKPF-MONAT' P_MONAT.
PERFORM NEW_FIELD USING 'BKPF-WAERS' 'USD'.
PERFORM NEW_FIELD USING 'BKPF-BUKRS' P_BUKRS.
PERFORM NEW_FIELD USING 'BKPF-BKTXT' P_BKTXT.
PERFORM NEW_FIELD USING 'RF05A-NEWBS' T_BSCHL.
PERFORM NEW_FIELD USING 'RF05A-NEWKO' HOLD_SAKNR.
PERFORM NEW_FIELD USING 'BDC_OKCODE' '/11'.
PERFORM NEW_DYNPRO USING 'SAPMF05A' '0300'.
PERFORM NEW_FIELD USING 'BSEG-WRBTR' WRBTR.
PERFORM NEW_FIELD USING 'RF05A-NEWKO' ' '.
PERFORM NEW_FIELD USING 'RF05A-NEWBS' ' '.
PERFORM NEW_FIELD USING 'BDC_OKCODE' '/11'.
PERFORM NEW_DYNPRO USING 'SAPLKACB' '0002'.
PERFORM NEW_FIELD USING 'COBL-KOSTL' HOLD_KOSTL.
CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A' UPDATE 'S'. -
ABAP Runtime Error CONV_NO_NUMBER
Dear all,
I am calling transaction F-02 for posting G/L Account from an FM. I tried with the Header Data and Account and Cost Centre but it says ABAP Runtime Error CONV_NO_NUMBER. I undersood that its because of the Number interpretation and coded accordingly but still it throws the same error.
Can you please help me in this....
With Regards
JayHi Sharma
the dump occured CX_SY_CONVERSION_NO_NUMBER
while executing the transaction some of the procedures may not raise and this dump throws, make a note of the actions in st22 and intimate to the ABAP team.
Follow the link
http://www.bwexpertonline.com/downloads/source_code.doc
Regards
Bhaskar
Edited by: bhaskar1818 on Jun 20, 2008 5:25 PM
Maybe you are looking for
-
HP Color LaserJet Enterprise M750n
encoding problems on printer correct print on another printer how to solve the problem? driver version 5.9.0.18326 Spoiler (Highlight to read) may be problems in the firmware? may be problems in the firmware?
-
Well, I guess I wrote everything in the question. But to repeat myself, when I first got Mountain Lion I was so sooth to see that when I was switching to finder from any other application (using the cmd+tabs buttons) I could see instantly my desktop
-
my ipod is not charging or when i connect it to the computer nothing is happening or when i try to connect it to itunes to restore it i cant and if i try to put it in dfu mode it is like 5% and when i turn it off and try to tunn it on it is dead and
-
Unable to insert record in child block
Dear all, I am facing a very strange problem. Actually i have a master-detail form where i need to insert master record as well as child records for the corresponding master item. For this i have a LOV in master block which populate the master item a
-
Cant sign in due to server error
Can't sign in to icloud from pc getting server error message