ABAP Runtime ERROR Error Code & Syntax Error in program SAPLSFES

Hi,
I am installing SAP XI 3.0 and as part of that I have installed the ABAP and Java WAS. I am applying SPs for the ABAP stack and I successfully applied the BASIS SPs 10 and 11(applied seperately). I was applying the SPs 12 and 13(together) and after running for some time the system crashed and I restarted the O/S and SAP to see that the SPs didn't go thru. Now when I try to log on using SAP GUI, it says "<b>ABAP Runtime ERROR Error Code</b>" which is blank and at the Bottom there is this message "<b>Syntax Error in program SAPLSFES</b>".
Pls any one help me ,
Kind Regards,
Gopi.

Hi Gopi,
If u r applying patches, the system would be running a background job SAPLSTPA. Hence you willnot be able to login till the job is complete.
You can check the job completion in the Windows MMC console.
Rgds
Ganesh

Similar Messages

UTL.MAIL error ORA-29279: SMTP permanent error: 501 Address Syntax Error in

Hi,
I am new to the forum so please excuse if I post incorrectly without conforming to the standards.
We need to send mails using the UTL.MAIL package and have installed them on the database.
Whenever I am trying to send an email I am getting the following error:
ERROR at line 1:
ORA-29279: SMTP permanent error: 501 Address Syntax Error in
[email protected]
ORA-06512: at "SYS.UTL_MAIL", line 654
ORA-06512: at "SYS.UTL_MAIL", line 671
ORA-06512: at line 2
The test code which I am running is as follows:
BEGIN
UTL_MAIL.send(sender => 'test <[email protected]>',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
I have tried different combinations:
BEGIN
UTL_MAIL.send(sender => 'test "<[email protected]>"',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
even tried
BEGIN
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
Everytime I am getting the same error.
This seems to be working with an exchange mail server but never on the SMTP server.
In the SMTP server logs the sender address is not having the angular brackets <> unlike the other mails which are being sent over.
It seems that the SMTP server is pretty strict and the SMTP admin will not change any settings on the server.
The oracle version is as follows
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Could you please help me out with a solution.
Some how the angular brackets are geting stripped off (which UTL MAIL package generally does), Is there any way in which I can include the angular brackets.
Edited by: 984757 on 29-Jan-2013 02:56
Edited by: 984757 on 29-Jan-2013 02:57

I dislike UTL_MAIL - clunky and poor abstraction interface, and not well written.
Had a look at the code. It does this:
WHILE (ALL_RCPTS IS NOT NULL) LOOP
UTL_SMTP.RCPT(MAIL_CONN,'<' || GET_ADDRESS(ALL_RCPTS) || '>');
END LOOP;The GET_ADDRESS() function process the ALL_RCPTS parameter, returns the 1st address from it, and updates the (in/out) parameter with the remaining string.
SQL> var address varchar2(200);
SQL> exec :address := '<[email protected]>,[email protected]';
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=[email protected]
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=
PL/SQL procedure successfully completed.
SQL> The address is explicitly surrounded by brackets as per the RFC. So that is what your SMTP server should see.
If not - perhaps then our UTL_MAIL versions do not match. Cannot recall from what version I pulled and unwrapped the UTL_MAIL package code I have.
Personally though, I've ceased using UTL_MAIL a while back. It lacks in may respects. I have written my own mail package that supports multiple attachment, complex Mime formatting, attachments of 20+ MB in size, and so on - running on the UTL_SMTP interface (that provides the transport layer for sending mail). And for issues like you are facing, I suggest considering using UTL_SMTP directly.
Edited by: Billy Verreynne on Jan 29, 2013 12:52 PM
(Updated the code with HTML entity names to get the code snippet to render correctly)

ERROR - 1242021 - (1) Syntax error near ['security_file']

When invoking the command "export security_file to data_file essbase_security_file.txt;" I get the error message "ERROR - 1242021 - (1) Syntax error near \['security_file'\]". I get the same message from EAS when right clicking and exporting from the console. The end game here is that I want to dump the Essbase.sec file into a readable format.
Any help appreciated.
Thanks
-Kevin
Edited by: user5439694 on Dec 31, 2009 11:58 AM
Edited by: user5439694 on Dec 31, 2009 11:59 AM

IT is easier to just go into EAS and select the Essbase server, then right click on Security and select export security file. Enter the file name you want it to go to. In Version 11 it puts the file in Arborpath\Products\Essbase\EssbaseServer\Bin
I also ran the following MaxL export security_file to data_file 'e:\datafiles\security_test.txt';
and it ran fine (It put the file onto the Essbase server in the specified directory)

SMS Error Cause code 29 error class 3

Please help, I just arrived in Baku, Azerbaijan and I'm getting SMS errors: Cause code 29, error class 3. I did receive a text when I first got here, but I can't send out. Also, I don't want to make any phone calls as I'm uber roaming. Data and WIFI seem to work just fine. It also appears that I am on the NAR network. Can anyone help me? I really need to send and receive texts!
Thanks!

I apologize for the issues you're having with text messaging, kellert! I know how important coverage is when you're abroad. You can reach our Global Support team at 908-559-4899. This is a toll-free number, so you shouldn't be penalized while roaming for calling for assistance.
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Code syntax error in header using a template?

Now running CS5 DW in a 32 bit Windows/Vista ultimate environment. The improved error messages have brought to light a problem that I apparently have had for a long time but didn't know it as CS4 simply flagged the line but no message.
Many of my site pages use a template http://a0540807.uscgaux.info/Templates/A0540807_Skeleton_2010.dwt
If I build or edit a page using this template in CS5, when in code view I see "There is a syntax error on line 57. Code hinting may not work until you fix this error. Line 57 is within the header of the page and is simply </script>
But if I simply detach the template from the page, the error goes away and it says no syntax errors.
So I am confused, is there an issue with the code or is this a Dreamweaver issue dealing with template usage?
While the error appears cosmetic, I keep wondering what to do to eliminate. Apparently, I have had this situation a long time as Line 57 is also identified back in CS4 but no error message until CS5. Any pointers are appreciated. Thanks.
Andy

I don't actually think there is any problem with your page...run one of your child pages through the W3C validator: http://validator.w3.org/ . I cast a page from your template and it came through with flying colors!
Beth

Flash is complaining about XML? Im using AS3 why are there XML errors? Unknown syntax errors.

Sorry to keep spamming these forums with my stupid errors, but I am trying really hard to learn Flash/AS3 and when I have got to grips with it, I will return the love.
I am a flash rookie trying to make a simple calculation device and I am getting a whole world of errors I have never seen before.
My Code (I apologise but it may be my bad syntax):
import flash.ui.Mouse;
var Hnum:String;
var PCnum:String;
var calc:Number = 25;
var Total:Number;
num1.restrict = "0-9";
num2.restrict = "0-9";
Est_btn.addEventListener(MouseEvent.CLICK, calculate);
function PartCount(event:MouseEvent):void{
    PCnum = num2.text;
    if (PCnum > 0 && < 10){
        parseInt(PCnum) * 10;
    or if (PCnum > 11 && < 20){
        parseInt(PCnum) * 5;
    or if (PCnum > 21){
        parseInt(PCnum) * 1;
Est_btn.addEventListener(MouseEvent.CLICK, calculate);
function calculate(event:MouseEvent):void{
    Hnum = num1.text;
    PCnum = num2.text;
    Total = parseInt(Hnum) * calc + parseInt(PCnum);
    Total.toString();
    Total_txt.text = String(Total);
I had everything working when I was only calculating Hnum by 25. But when I try to intergrate the if or statement everything goes wrong and I get these 5 errors.
Scene 1, Layer 'Actions', Frame 1, Line 15
1104: invalid xml name
Scene 1, Layer 'Actions', Frame 1
1084: Syntax error: expecting xmltagendend before end of program.
Scene 1, Layer 'Actions', Frame 1
1084: Syntax error: expecting rightparen before end of program.
Scene 1, Layer 'Actions', Frame 1
1084: Syntax error: expecting identifier before end of program.
Scene 1, Layer 'Actions', Frame 1
1084: Syntax error: expecting rightbrace before end of program.
I dont understand what these errors are pointing out? Why XML? is it my variable names?
Here is the code I had before the second function that worked fine:
var Hnum:String;
var PCnum:String;
var calc:Number = 25;
var Total:Number;
num1.restrict = "0-9";
num2.restrict = "0-9";
Est_btn.addEventListener(MouseEvent.CLICK, calculate);
function calculate(event:MouseEvent):void{
     Hnum = num1.text;
     PCnum = num2.text;
     Total = parseInt(Hnum) * calc;
     Total.toString();
     Total_txt.text = String(Total);
Any help would be greatly appreciated! I will get the hang of this!
MrB

Thanks guys you were right it was parse problem with the var type.
I have changed the code adding parseInt where necessary.
I have also added the other functions. But now after it was working fine with just the one function it is doing the strangest thing.
There are no errors, it is running fine but it is outputting the letter "a" instead of any numbers? Is this something to do with the strings? It is most odd.
Any help would be greatly appreciated.
Here is the new code:
import flash.ui.Mouse;
var Hnum:String;
var PCnum:String;
var PCcalc:Number;
var Pmath:Number;
var calc:Number = 25;
var Total:Number;
num1.restrict = "0-9";
num2.restrict = "0-9";
Est_btn.addEventListener(MouseEvent.CLICK, calculate);
function PartCount(event:MouseEvent):void{
    if (parseInt(PCnum) > 0 && parseInt(PCnum)< 10){
        PCcalc == 1;
    if (parseInt(PCnum) > 11 && parseInt(PCnum)< 20){
        PCcalc == 2;
    if (parseInt(PCnum) > 21 && parseInt(PCnum)<200){
        PCcalc == 3;
Est_btn.addEventListener(MouseEvent.CLICK, calculate);
function PartCalc(event:MouseEvent):void{
    if (PCcalc == 1){
        Pmath * 10;
    if (PCcalc == 2){
        Pmath * 5;
    if (PCcalc == 3){
        Pmath * 1;
Est_btn.addEventListener(MouseEvent.CLICK, calculate);
function calculate(event:MouseEvent):void{
    Hnum = num1.text;
    PCnum = num2.text;
    Total = parseInt(Hnum) * calc + Pmath;
    Total.toString();
    Total_txt.text = String(Total);
Thanks
MrB

Select query gives error in Code inspector and extended program check

Hi,
I have a query .
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE endda EQ c_date AND
z_nca_required EQ c_yes.
This query gives me an error in Code inspector like :
Large table pa0001: No first field of table index in WHERE condition
I have one more query that gives error in extended program check
SELECT SINGLE stell ename
      INTO (g_stell, g_name)
      FROM pa0001
      WHERE pernr EQ wa_nca_tab-pernr AND
            endda EQ c_date.
The warning says:
*In "SELECT SINGLE ...", the WHERE condition for the key field "SEQNR" does not
test for equality. Therefore, the single record in question may not be unique.*
Its too urgent.
Please reply.
Regards,
Binay.

The first field is PERNR .. so if UR not giving pernr it will fetch
all the data from the said table and between the given dates ..
Check if this is your requirement ...
write the select as ...
where r_pernr is a range ...
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE pernr in r_pernr <----
             endda EQ c_date AND
             z_nca_required EQ c_yes.
As UR using select single it's expecting to use all the key
fields in the where condition ...
U can ignore this warning message

Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0

Hi guys,
When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0.
I have found several SAP notes, especially [Sap Note 944842|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler], but the implementation on our system does not change anything.
We are working on BW3.5 SP12.
Can anyone could tell me what to do ?
Will this issue be solved once we upgrade until SP18 as it is mentionned in the SAPNote ?
Thanks,
Alexandra
Edited by: Alexandra Guillaux on Apr 1, 2009 4:36 PM

Hello Alex,
after implementing the corrrection part of note 944842 via SNOTE, plaese also:
1. replicate datasource
2. activate transfer structure (report RS_TRANSTRU_ACTIVATE_ALL)
3. activate infoobject (make dummy change to description
of infoobject etc, save and activate it, remove change and save and
activate it again).
Hope it could resolve the incident.
Thank you & Best regards,
Vince

Javascript application error message? syntax error

I am getting a pop up error message continuously when using firefox 10,7.5 and prior versions,
"Javascript Application Error:
syntax error:
It demands I click on "OK" button to proceed.
How do I fix this problem?
thanks
linniek
or
[email protected]

The Social Fixer extension has been reported to cause this issue.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Thunderbolt SMS Error Cause Code: 3 Error Code: 2

My phone was apparently turned off due to a bill paying problem. Apparently the bill's been payed and im still recieving this error when i try to send a text, and when i try to call out, i get verizon financial services, but i can recieve calls and texts, what gives? Cause Code: 3 Error Code: 2 appears in the details when it says network problems.

Hi there culater365! Sorry that you're having problems with SMS on your Thunderbolt. I hope it has been resolved since you posted this request for help. If not, please let me know. I'll be happy to review your account. In addition, if you are uncertain about your balance in the future, you can dial #BAL on your phone to get your balance! Thanks!
DionM
Follow Us on Twitter www.twitter.com/vzwsupport

SMS Error: Cause Code 3, Error Code 2

I can't send any text messages. This started today and I keep getting a network problems: cause code 3, error code 2. I've tried rebooting my Thunderbolt twice, turned it off for 15 minutes & took the battery out. Nothing is fixing the problem. Can anyone help?

This appeared to been covered in Incredible thread and also the #3 code was reported with a possible solution on TechArena.
Code #1
http://community.vzw.com/t5/DROID-Incredible-by-HTC/sms-error/td-p/315954
AntonioC_VZW wrote:
kerrygillock wrote:
This is a issue in the switch, and can be resolved with a call to tech support to resolve.
Thanks for the input!
In fact the text messaging issues outlined in the original post will require a verification of the account provisioning and this can only be done by phone with a Technical Support representative.
Code #3
http://forums.techarena.in/portable-devices/1366342.htm
Florence_USA
Member
Join Date: Nov 2009
Posts: 1,064
Re: SMS error 3 on Verizon
This seems to be a transport error. This problem is caused if there is congestion on the cell network. I searched it on Verizon and I found no information about this error on Verizon. You should talk to your service provider and see what they can help you. They will give you the exact reason behind the issue and the timeline for the issue.
This may direct you to a solution if the solution isnt already listed..

Error status 26:Syntax error in IDoc (segment cannot be identified)

Hi Experts,
i extended one idoc which has the following structure
                           A(this is the parent segment)
                                z1
                                    zz1.1
                                    zz1.2
                                    zz1.3
                                    zz1.4
                                e1
                                e2
                                    z2
                                       zz2.1
                                       zz2.2
                                       zz2.3
                                       zz2.4
I am using an user exit for populating the custom segment. values are getting poppulated.
My problem is all segments are coming in the same level. like below
A
z1
zz1.1
zz1.2
zz1.3
zz1.4
e1
e2
z2
zz2.1
zz2.2
zz2.3
zz2.4
Diagonsis of error.:
The segment Z1BPAD1VL does not occur at the current level of the basic type CREMAS05 (extension ZCREMAS05).
This error can have several reasons:
The segment Z1BPAD1VL is assigned to a group whose header segment does not occur.
The segment Z1BPAD1VL does not exist in the syntax description of the basic type CREMAS05 (extension ZCREMAS05).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
i have maintained we81 and we82. partner configuration in we20 is also maintained..
What might be the problem??pointers on this will be very helpful.
Regards
Sridevi S

Hi,
>check whether all the parent segments are filled before child segments .
>check the heirarchy level you r passing for each segment.
Regards,
Lokeswari.

When my adobe flashplugin crashes the error message says 'syntax error'. How do I correct this?

I have installed the flashplugin and sometimes it works, sometimes it crashes. I have done everything to correct this problem that I can think of. I finally got this error message when searching for another reason why.
What I dont understand is why it works sometimes. Then sometimes I get the little box (question mark) in the corner that means my flashplugin is not working.
I have uninstalled the adobe flashplugin in both my windows and the main. I know its installed correctly. I just do not understand what is making it so difficult to work properly. It does work sometimes.. so why not all the time?
Thanks for any advice or help. I have used every option available on your trouble shooting pages both on firefox and mozilla.

Thanks for the advice, but sadly I have done this... over and over again. I have uninstalled it in both the Windows and other. Each time I try to no avail. It does work sometimes and then crashes so I know it really is installed, just that something is blocking it. I use msn and have checked my settings to allow it, and on firefox done the same. Once in a very blue moon it allows it to work, but that is very rare.
That is what I dont understand. The program is there, but somehow something is making it not work properly.
I have been thru all the help and support and done everything that anyone has suggested to remove or unblock, and files to be removed etc. Still scratching my head over this one.
Thanks again.

JMS error reprocessing an syntax error edifact. Loopin error

Hello all,
The problem I have found is that the adapter is trying to process an not well formed edifact. As I read in the JMS FAQ
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/604e2b64-e689-2910-64b3-ffd650f83756
In chapter 13 it is said that is the standard behavior. Does anybody know the way to fix this error?
P.S. libraries installed v7.0
This topic was discussed here JMS adapter does not recover from error
Thank you for your time,
P.S.This issue is urgent Points will be given for sure if the answers help

Hi Sergio
Is your scenario transactional? Just try to uncheck "Transactional JMS Session" and try.
It may help
Thanks
Sai

How to fix 2008 MacBook error: load code signature error 4 for file "airportd"?

Macbook doesn't boot, error came up when trying to boot with safe boot with status. I have never had or used Airport Express. I tried rebooting plugged in directly to router and same error occurred. Any suggestions?
(Also receiving disk0s2 i o error in safe boot status)

Yosemite is not supported for Encore, but neither was Mavericks (even though it is on the list, I don't think it is truly "supported," and there were issues).
Many of the issues in Mavericks and Yosemite appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
http://forums.adobe.com/message/6109315#6109315
And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
Monahan re Premiere permissions
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Kopriva re permissions and AE primarily:
http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
Re the Photoshop -1 issue:
http://forums.adobe.com/message/5950080#5950080
The workaround was not to left-click on the menu. Use right click, or other options and menu commands.
http://forums.adobe.com/message/5810884#5810884
See post 12 and several following where we are looking for workarounds to the error.

ABAP Runtime ERROR Error Code & Syntax Error in program SAPLSFES

Similar Messages

Maybe you are looking for