ABAP Server Proxies - Fault Handling

Hello,
We use ABAP server proxy to create a PO on an R/3 system.
This is done in an asynchronous interface. When the function that creates the PO returns an error we raise a fault in the server proxy. However when this occurs the fault is not passed to the XI. There the message is successfully processed. When we look at the integration engine on the R/3 system itself there we find the exception.
Is there a way to pass this fault to the XI server? Or should I define my interface a synchronous for this?
Greetings,
Bart

HI
In the asynchronous case, you can see a fault message in the monitoring of the Exchange Infrastructure. For example, in technical monitoring you can display the fault message in a more readable format by choosing Further Information on Error.
And in the synchronous case, you can integrate a format of this type into your application on the caller side by using the method CL_PROXY_FAULT=>SHOW.
Regards
Arpit Seth

Similar Messages

ABAP server Proxies

Hi
Can anybody list down the steps that need to be configured (in XI and R/3) system for executing ABAP server proxies?????
specifically, i am looking for steps that would connect XI with R/3 . There are a few issues we are facing during runtime in sxmb_moni.
it would also be helpful if someone can give a technical description of the ABAP server proxy runtime.
Note:I have seen the blogs that describe how to create ABAP server proxies
Thanks and regardsk
krishna

hi Jai
In XI , under sxmb_adm , the value for
Role of business System is : Integration server 
and the value for Corresponding Integration Server is the value that is defined in SLD for the XI business system.
In R/3, under sxmb_adm , the value for
Role of business System is : Application System
Here , we are not able to pull the value for Integration Server due to the following error
No access to system landscape present.
In R/3, the sldcheck fails with the error
"No business system maintained in SLD" but if i check in SLD, there exists a Business system.
Regards
krishna

ABAP Server Proxies-- any help docs..?

Hi,
Only after completing my ABAP Client proxies, i found that there was a weblog on it. Now i am trying Server Proxies, i want to maximize the use of SDN. So can somebody tell me where there any any blogs posted on server proxies...?
kindly provide me the good links for Server proxies.
Regards,
Christina.

Hi,
For server proxies,
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Also refer to:
http://help.sap.com/saphelp_nw04/helpdata/en/62/8a5f3c31727d59e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
Regards,
Sridhar
Message was edited by: Sridhar Rajan Natarajan

HTTP Error with Status code 403 when using ABAP Server Proxies

Hi All,
I have been working on ABAP Client and Server proxies in my project. The weblogs by Ravikumar, Prateek Shah, Siva Maranani & VijayaKumari were very helpful and thank them all for just helpful and guiding postings.
Interfaces using Client proxies are working fine and have been tested successfully. But I'm facing bit problems with Server Proxies. The scenario is of File to SAP system via XI. Data is coming correct up to Technical routing in pipeline but at call adapter(for Server Proxy to SAP)in XI pipeline I receive Error:
HTTP response contains status code 403 with the description Business Server Page (BSP) Error Error when sending by HTTP (error code: 403, error text: Business Server Page (BSP) Error)
Previously I was receiving authentication and authorization related error of status code 401 and then in communication channel I replaced user profile with a user id having role SAP_XI_APPL_SERV_USER. The basis peron has created new user id with role SAP_XI_APPL_SERV_USER only and that I'm using. I've tried creating a HTTP destination with the created user id and in test connection too receive same error message.
Please help me out with your inputs and understanding on the topic.
Thanks and Best Regards
Prashant Rajani

Hi Prashant,
Please take a look at these threads..They deal with the same problem, and they have been resolved here.
BSP Authorization error
Service cannot be reached . error code 403 the reason forbiddn
403 Error when accessing the server
Hope your issue gets resolved.
cheers,
Prashanth
P.S Please mark helpful answers

ABAP server proxies question -

Hi
I have the following scenario in XI 3.0
xml File --> XI --> ABAP server proxy to R3
I have a specific requirement : Based on the value of one of the nodes in the same xml file, I have to point to two different inbound ABAP proxy interfaces - in the R3 system - the R3 destination system being the same - The idea is that I want to maintain separate proxy classes in the SAP system - and hence the need for two different inbound interfaces.
I tried this in recv determination - basically I need to be able to point to two different interface mappings & inbound interfaces based on the contents of the incoming xml file - however I am unable to do this ?
Any thoughts , suggestions on how I could achieve this ?

Hi Karthik -
>>>I tried this in recv determination
It should be one receiver in Receiver determination and the content based mapping should be done in Interface Determination. You can select the different interface mappings there.
Regards,
Jin

Serializing calls to ABAP server proxies

Hi
I have a following scenario -
SOAP client ( EOIO)--> XI IS --> XI Adapter --> (EOIO ) R3
The objective is to create a material in R3 based on the SOAP client call onto a XI Webservice . XI Integration server uses a ABAP server proxy ( async , to be implemented ) to post material changes/creation data into R3. As shown above - the scenario has to be async end-to-end and also there is a need to serialize the calls to R3 all the way from the webservice call based on an object key ( material number ) . This is to ensure that the material changes for the same material do not get posted out of order.
1. How do I assign/create a EOIO queue at the source with the object key - material ?
2. In my ABAP server proxy that I implement to post material data - do I have to do any queue related activities ?
Any thoughts pointers on a solution to this scenario is appeciated.

Hi
I realized that there is a workaround to assign dynamic queues name for the async EOIO call at the soap communication channel level - in my case,
I simply create multiple communication channels as many as the number of material types ( one queue per material type ) with each channel name containing the material type at the end of its name - say - CC_FERT
Then in each communication channel definition, I set the queue name as a valid material type in the R3 system.
The SOAP client / calling application that invokes this XI webservice - will call the corresponding communication channel - based on the material type of the material it wants to update.
In this way, I basically have multiple queues for material creation/updation going into R3 and also ensure that updates for a single material always go into R3 in a serialized manner.

ABAP server and client proxies

Dear All,
what is the diff between ABAP server and client proxies?
Regards,
Ashish goyal

Hi Ashish,
Client proxy means proxy in Sender System, and Server Proxy means proxy in Receiver System.
Have a look to the following links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm">ABAP Proxy Runtime</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c9/74246d8ad2447799063d39013e9a11/frameset.htm">Programming with Client and Server Proxies</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Hope this help
Francesco

ABAP Server Proxy: Message getting blocked in R/3 Application system

Dear All,
We have developed a FILE->XI->SAP R/3 (WAS 620) interface using ABAP Server proxies. Message gets successfully transferred to R/3 system using proxies but is getting stuck in inbound queues with green flag and message "message scheduled(commit follows)". In queue it displays status as "CPICERR" with description "connection closed(no data)". When trying to execute LUW manually from queue it throws message "Target system/gateway not active". I've checked queues they are registered properly, SLDAPICUST, SLDCHECK & Integration Engine Configuration checks are successful.
Can you please provide your valuable inputs?
Thanks and Best Regards
Prashant Rajani

Hi Stefan,
I am doing a submit to another report from ABAP proxy which inturn updates data in respective tables. Whether still commit work is required after submit?
The code was tested succesfully in Dev and in QA it started giving this problem.
Please let me know if we are missing on something.
Thanks & Regards
Prashant

ABAP Server Proxy development for creation of IDOC

Hi all,
I am working on JDBC to ABAP Server Proxy where i need to populate fields and then i need to mapp to the standard IDOC ie, SHIPMENT_CREATEFROMDATA01 which will create shipment idoc this is my requirement.Can anyone provide me the proxy development part for creation of IDOC.
Regards,
Bhoj

Hi,
Create server proxy at the receiver end and deploy it using the following links:
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
http://help.sap.com/saphelp_nw04s/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/e2bc3d9ecc6b3be10000000a114084/frameset.htm
Server proxy part1 and part2:
/people/sap.user72/blog/2005/12/08/integration-builders-through-proxy-server-part--1
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
Regards,
Vinod.

ABAP server proxy help required

Hello,
I want to make two simple ABAP server proxy scenarios
1. File to ABAP server proxy (async scenario)
2. File to ABAP server proxy (sync scenario)
Pls send me the blogs/docs for the above scenarios.
Regards

Henry,
Please go through the below links.
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Also go through this, if you have problems in your proxy connection.
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Sarvesh

IDoc to ABAP Server Proxy scenario

HI Experts,
Recently our client has upgraded his R/3 system. From this R/3 system, IDocs are posted to SRM system thorugh XI.
On receiver side we are implementing ABAP Server Proxies.
We have recomended our client with all necessary changes to be done on XI Server during change over from old to new R/3.
After change over, they have tested the scenario, posting the IDocs to the SRM system. We found the follwing error in SXMB_MONI, Could some one tell me where exactly to look in to it.
An error occured within an XI interface: The reference to a source object via the object number is different than the reference via the GUID Programm: SAPLBBP_BD_API; Include: LBBP_BD_APIF39; Line: 175
Regards
Praveen

Hi,
Pl implement note 1052569.
And run report "RPODDELVRY",
MM-SUS scenario mapping of the Goodsreceipt for inbound delivery @SUS
Thanks
Swarup

Adapter for ABAP server proxy??

Hi all
Can anyone tell me why we need receiver agreement (XI adapter) in case of ABAP server proxies???

Hi Smith,
The use of XI adapter in abap server proxies is to communicate the IS with its respective R/3 system ( ie application system).Proxies will communicate with the XI server through the native SOAP calls over HTTP . So we need to mention the integration server to connect to the correct application system during runtime.
Have luk at below links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/content.htm
Hope this will help.
Regards,
Prasanthi.

Propagate fault message from ABAP server proxy to XI

Hello
My scenario is asynch HTTP -> async ABAP server proxy.
I have searched a forum but I didn't find the ansver on my question:
Is it possible to propagate a fault message from SAP system to XI in case of asyncronous ABAP Proxy in order to see in SXMB_MONI of XI?
I see errors only on SAP side but this solution doesn't satisfied me I want to see all errors in one place.

Hi,
Have u used commit work at the end of the code.
Can you please tell me what all configuration u have done.
U have referred the ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Refer the below log for Client Proxy -
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Chirag

Abap proxies ( Client and Server proxies)

Hi Team
Good day to you. I am now started doing some example scenarios on ABAP proxies(ie Client and Server proxies). After going through the blogs which are avialable, i am writing this question to you for clarification.
As per my understanding, the below are the required predefined settings which i need to do in my landscape to generate abap proxies(ie client and server proxies).
My landscape includes the below systems.
System A : SAP XI 3.0 system and
System B : SAP R/3 on WAS 620
SAP R/3 predefined Steps
1.Create HTTP connection in the business system.
2.Configuration Business system as local Integration Engine.
3. Connection between Business System and System Landscape Directory.
4. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
(Here in the step 4, i found the below needs to be done)
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
 Program ID: LCRSAPRFC
 Gateway Host: <Integration Server host>
 Gateway Service: <Integration Server gateway service>
 Number of process: 3
4. Under Repository specify the following:
5. Choose Set.
Application Server: <Integration Server host>
(i am not able to perform the steps which comes under point 4. so please Guide me how to goto J2EE engine and configure accordingly.
5. Maintain SLD access details in Transaction SLDAPICUST.
As per my understanding, i need to do the above predefined configuration steps in SAP R/3 system (ie bussiness System) for doing Abap Client or Server proxies.
And in the meantime, i would like to know whether i need to do any predefined configuration steps in XI 3.o system also. Please check and suggest me accordingly.
Once i get clarification on predefined configuration steps, i will proceed with the example scenarios on client and server proxies which are already in SDN.
Thanks in advance.
Regards
Raj

Hello Pavan
thanks for your response. you said that for the connection type 'H' we need to provide values for GATEWAY HOST and GATEWAY SERVICE but here i need to create the RFC destination of type 'T'. so please tell me whether i need to give the values for GATEWAY HOST and GATEWAY SERVICE for connection type 'T' also and the second thing is please tell me the difference between Application system and bussiness system accordingly to my landscape which i mentioned in my question.
I am in little confusion because as per the requirement for abap proxies in the blog they mentioned that all these setting should be done in the bussiness system (ie SAP R/3) but you are saying that Application system. so please clarify.
My landscape which i am going to use in Abap proxy generation
System A: XI 3.0
System B: R/3
Here which is bussiness system and which is application system. Pls calrify.
Thanks in advance.
Regards
Raj

Clarification needed in the Fault Handling Framework(Error Hospital)

Hi,
I need some clarification on Fault Handling Framework...
Scenario:
My BPEL Process is Asynchronous.(10.1.3.3.1) and I tryed to invoke the another BPEL Process( which is used to select the Fname from the table using DB Adapter) . In the Main BPEL Process I have the Fault handling Framework and I done necessary changes in the bpel.xml. This is successfully working for Invoke Activity when ever an Remote or Binding Fault occurs in the Sub-BPEL Process and this Fault is send to Fault-Policy.xml in the server(bpel/domains/default/config/fault-Policy) and works accordingly to the action mentioned in the policy xml....( I have also made changes in the fault-bindings.xml ).
How ever this Framework is working fine for every actions.
Need Clarification:
1) Only the Binding and Remote faults will work for the Fault handling Framework.
2) can we use User defined faults (Buissness Faults,,,) for this........because I used the User defined faults to invoke the fault-policy.xml and it won't works....
3)Only Invoke Activity can be handled for this Framework or any Other Activity........
4)How to handle other Activity in the Fault-policy.xml...
5)Any difference for Asynchronous or Synchronous in this Fault Handling Framework.......
I also referred the Oracle SOA Suite New Feauters PDF .......
Can any one send me the related documents and try to help me on this.
Please help me on this.......
Thanks,
Ashok.

Hi Chintan,
You are saying that Custom faults are also supported for fault-Policy.xml.
I can't understand that 2nd answer you said. can you please explain how to use the Custom faults in the FaultHandlingFramework..
My Scenario:
I have 2 BPEL Process, BPEL1 will invoke the BPEL2 and if any remote fault or binding faults occurs in the BPEL 2 its returning the same fault to BPEL1 and here I am using FaulthandlingFramework , this fault send to fault-policy.xml and necessary action is took place succesfuly...(like retry, human intervention.....)
But when I throw some CustomFaults(userdefinedFaults)in the BPEL2 , its returning as a remotefault to BPEL1. I don't know how to use the customFaults in the Fault handling framework.......
Can you explain me in detail how to use custom faults in faulthandling framework...............
Send me some related documents for this.....

ABAP Server Proxies - Fault Handling

Similar Messages

Maybe you are looking for