ABAP table for "Condition table"

Dears,
Could you please tell the ABAP table for Condition table.
My requirement is : I need to check a field e.g. KUNNR, in which all the condition tables KUNNR is been used.
Thanks
pinky

Hi,
Use t.code se16n, and then provide the sales order number for vbak,
or vbap take value of field KNUMV (The internal number under which
the system saves conditions that apply to a sales order header),
KNUMH (The internal number under which the system saves conditions
that apply to a sales orde itemr), and go to KONV (for vbak) and KONP
(for vbap) enter this KNUMV or KNUMH number and execute , you will get
all item pricing conditions for that sales order.
For pricing record :- table KONH - Condition (Header)
                 table KONP - Condition (Item)
with field KNUMH - Condition record number.
hope this will help.
regards
Vivek.

Similar Messages

  • ABAP Table for DynamicConfiguration details of XML message in SXMB_MONI

    Dear All
    I have a requirement where I have to read the value from DCJMSCorreleationID property of message which is recorded in SXMB_MONI based on the SAP PI message ID.
    I have 2 interfaces as below
    Interface one (INT1) : JMS-PI-ECC --->Inbound interface to ECC when message is received on PI it will have DCJMSCorreleationID populated with some ID as shown below
    Go to SXMB_MONI -->Inbound Message ---> SOAP Header --->DynamicConfiguration
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <SAP:DynamicConfiguration SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSCorreleationID">
    a26c4276-9d5e-11e3-ba87-000004238292
    </SAP:Record>
    <SAP:Record namespace="http://sap.com/xi/XI/Message/30/general" name="senderAgreementGUID">dd3fb7c6b983314293e14ba59df1ad45</SAP:Record></SAP:DynamicConfiguration>
    Interface Two (INT2):-ECC-PI-JMS----> Outbound from ECC where I am passing a SAP PI Message ID for INT1 in one of the field
    Can I read this DCJMSCorreleationID for INT1 when INT2 is executed and have message ID for INT1 ?
    Where are these SOAP hearder porperties like DCJMSCorreleationID are stored on ABAP table?

    Thanks Jörg for your reply
    I have a back up plan for ZTable approach but the only concern there is RFC calls for read and write
    we have implemented a FM which gives the original payload using a std SAP functional modules FM SXMB_GET_XI_MESSAGE_INT and  ECATT_CONV_XSTRING_TO_STRING
    But I am looking for the SOAP Header information for DCJMSCorreleationID
    So if there is anything which will help to read this DCJMSCorreleationID property easily form existing message SOAP header is really helpful

  • Abap tables for adapter engine errors

    Hello,
    Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables?
    Any help is very much appreciated.
    Thanks
    MLS

    Hello,
    What I am trying to do is write a report in ABAP, which will read the table for errors (for messages which are not processed successfully in Integration engine or adapter engine) and email those errors to users. If there is communication channel error in RWB, the message in sxmb_moni is still shown as success and is not being updated in table SXMSPERROR.
    We cannot use PI Alerts here since the email list is dynamic for the same PI interface.
    Any ideas on how to accomplish this?
    Thanks
    MLS

  • Abap tables for commitments

    budget abap tables for the cost element and commitment items,thanks.

    Hi,
    For budget information you have to look in RPSCO for rows with WRTTP = 41 and for actuals per cost element you look in COSS/COSP/COSSP/COSPP for rows with WRTTP = 4. Budget is stored at the object level and not at cost element level.
    Regards,
    Kenneth

  • ABAP Table for Integration Directory Objects

    Hi
    Is there any ABAP table, which stores the runtime objects, communication channel, It's status, Service etc.
    Where you can find out status of each channel and the channel type used within the ABAP stack in Data Dictionary table.
    Replies apprecriated.
    Swetank

    Hi Paresh,
    To view the status of adapters you can use RWB.
    You dont need to write an ABAP report for this purpose.
    RWB->Component Monitoring->Click on Displaye with status "all".
    Then..click o Integration Server->Adapter Engine
    click on 'Adapter monitoring' in the the 'Status' tab page of the window at the bottom of the screen.
    This will launch a widow with status details of all the monitors.
    Hope this info helps you.
    praveen

  • Table containing validity periods for condition types in me12 transaction

    Hi .,
          i need the name of the table which contains the Validity Start and Validity End dates for Condition type 'PB00' IN ME12 transaction .. kindly help me..
    Regards.,
    S.Sivakumar

    hi,
    we hav data in A018.
    130     M     PB00     10011     30000102     XXXX     0     31.12.9999     03.09.2004     0000007715
    130     M     PB00     10061     20000822     XXXX     0     31.12.9999     08.10.2006     0000011194
    130     M     PB00     10061     30000436     XXXX     0     31.12.9999     21.01.2005     0000009793
    130     M     PB00     10061     30000437     XXXX     0     31.12.9999     21.01.2005     0000009792
    130     M     PB00     10065     80000414     XXXX     0     31.12.9999     30.07.2004     0000007487
    130     M     PB00     10269     10004972     XXXX     0     31.12.9999     20.01.2007     0000011237
    130     M     PB00     10482     30000129     XXXX     0     31.12.9999     16.07.2004     0000006911
    130     M     PB00     18091     30001906     XXXX     0     31.12.9999     06.05.2006     0000011061
    130     M     PB00     18091     30001912     XXXX     0     31.12.9999     06.05.2006     0000011059
    130     M     PB00     18091     30001913     XXXX     0     31.12.9999     06.05.2006     0000011060

  • There are tables for condition type ZCB0 but they cannot be maintained

    Hi,
    I'm encountering a problem with Conditions in SAP CRM 7.0 - TPM scenario.
    Here you can find the error:
    "A condition type was selected that cannot be maintained in this system or for which there are no maintanable tables in this system."
    Procedure:
    "If maintenance for condition records of a specific condition type/ table is required in this system, this must be set up in Customizing Notes for data transfer from the R/3 System"
    Can anybdy better clarify what do I have to do?
    Thanks in advance,
    Andrea

    Hi,
    I proceeded with the download of the following objects
    u2022 DNL_CUST_CND_BO
    u2022 DNL_CUST_CNDALL
    u2022 DNL_CUST_CND_CD
    u2022 DNL_CUST_CND_FG
    u2022 DNL_CUST_CND_PR
    u2022 DNL_CUST_FGD
    u2022 DNL_CUST_PRC
    u2022 DNL_CUST_CAD
    u2022 DNL_CUST_BON
    and I've run the report /SAPCND/RV12N001 for the generation of condition tecnique (Application: CRM; Usage: CD,PR,BO; Table number : *) but the condition tables are not assignable to the Condition Generation Types and I'm not able to create Trade Promotions with Trade Spends.
    What should I do in order to solve the problem?
    Thanks in advance and Best Regards,
    Andrea Ricci

  • Dynamic configuration- Is file name stored in any abap table in PI

    Hi.
    Is there any ABAP table in XI containing the dynamic configuration's xml of a message.
    For any file scenario Can I get the file name from any of the abap table in PI
    Regards,
    Deepak

    Interesting ABAP tables in XI
    Interesting ABAP tables in XI – Part I
    Regards,
    Phani

  • Dynamic configuration in ABAP tables

    Hi,
    is there any ABAP table in XI containing the dynamic configuration's xml of a message (or an equivalent information in any format)?
    Thanks,
    Daniele

    hi
    Dynamic configurations will be a part of the xi message header
    chk these tables
    1.SXMSPMAST: (Integration Engine: Message Queue (Master)) The table is the master table for the monitoring information. You can get the timestamp, interface status, message id, and many more information.
    2.SXMSPEMAS: (Integration Engine: Enhanced Message Queue (Master)) The table provides the namespaces, the business systems and message interfaces involved in the interface.
    3.SXMSMSTATT: (Exchange Infrastructure: Message Status Description) This table provides a message status description.
    4.SXMSMSTAT: (Exchange Infrastructure: Message Status) This table is helpful if you want to show the process status icon for the corresponding message state.
    refer this for code sample
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
    rgds
    arun

  • How to handle BLOB field in receiver JDBC adapter into ABAP table

    Dear Experts,
    I am working in a synchronous scenario with Sender ABAP Proxy to Oracle Database as receiver via SAP PO 7.4.I will be calling a stored procedure view with fields ID, NAME,Age,*** and BLOB (Image binary).
    1. The response from Oracle Database field BLOB is to be stored in ABAP table.Would I have to write any JAVA program to read the BLOB or the receiver JDBC adapter will handle it and store in a table by using ABAP proxy once it reaches ECC.
    2. If yes, would the JAVA program have to deal with other 4 fields.
    3. Can I use a UDF mapping to this BLOB field.
    Regards
    Rebecca...

    Dear Praveen,
    Thanks for your response...
    Please correct me if I am wrong.
    1. For 1-1 response mapping for BLOB field, I will use just use the below UDF code.
    public static byte[] hexStringToByteArray(String s) { 
                int len = s.length(); 
                byte[] data = new byte[len / 2]; 
                for (int i = 0; i < len; i += 2) { 
                            data[i / 2] = (byte) ((Character.digit(s.charAt(i), 16) << 4) 
                                                                                         + Character.digit(s.charAt(i+1), 16)); 
                return data; 
    2. ===Using the byte data, create binary attachment in mapping for abap proxy response===
    Could you please share how to create the binary attachment.. I am not clear
    Regards...

  • HR ABAP:  table/infotype relationships

    Hi.
    I'm experienced in doing ABAP programming for all the rest of the modules, but with ABAP HR, I am new and doing one for the first time.  I need your help regarding how to find tables/infotypes and relationships to each other.
    Specific work example/scenario: 
    From selection criteria of requisition information, I am supposed to have an output report with application and candidacy information.
    1.) How can I relate Infotype 5125 with info type 5132 and 5102? 
    I am more comfortable with select statements hence I prefer explanation using the transparent tables HRP5125, HRP5132, etc.
    2.) How can I make use of the table HRP1001 to establish relationships between different tables/infotypes of HR?
    Also, kindly send any links and documents that can give an at-a-glance summary of what I can use when doing ABAP for HR for the first time. 
    Thanks for your help and expertise and may God bless us all!
    Celeste

    More exactly look at tables
    - [HRP1000 |https://www.sdn.sap.com/irj/sdn/advancedsearch?query=hrp1000+&cat=sdn_all]: org. units, positions, etc.
    - [HRP1001|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrp1001&adv=false&sortby=cm_rnd_rankvalue] : links between org. units, positions, etc.
    Look at this thread Tables for ORG model  and FM [RH_STRUC_GET|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rh_struc_get&cat=sdn_all]
    Regards

  • Access ABAP Table using Java (NWDS/JCO)

    All,
    I am trying to setup a jco connection from java program through NWDS to ECC abap table.
    However I am getting the following error in NWDS:
    Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:\Program Files\Java\jdk1.6.0_45\bin\sapjcorfc.dll: Access is denied]. java.library.path [C:\Program Files\Java\jdk1.6.0_45\bin;.]
    and a parity error on my system:
    "Parity blocked an attempt by javaw.exe to run sapjcorfc.dll because the file is not approved.  If you require access to this file, please contact your system administrator.  Scroll down for diagnostic data."
    Here is the Java code...per the SAP website:
    package com.sap.pi.updateAbapSxmbAdminParams;
    import com.sap.mw.jco.*;
    public class ReadPiAbapTables {
      private static JCO.Client theConnection;
      private static IRepository theRepository;
      public static void main(String[] args) {
       createConnection();
       retrieveRepository(); 
       try {
        JCO.Function function = getFunction("RFC_READ_TABLE");
        JCO.ParameterList listParams = function.getImportParameterList();
        listParams.setValue("BSAUTHORS", "QUERY_TABLE");
        theConnection.execute(function);
        JCO.Table tableList = function.getTableParameterList().getTable("SXMSCONFVLV");
        if (tableList.getNumRows() > 0) {
         do {
          for (JCO.FieldIterator fI = tableList.fields();
          fI.hasMoreElements();)
           JCO.Field tabField = fI.nextField();
           System.out.println(tabField.getName()
             + ":t" +
             tabField.getString());
          System.out.println("n");
         while (tableList.nextRow() == true);
       catch (Exception ex) {
        ex.printStackTrace();
      private static void createConnection() {
       try {
        theConnection = JCO.createClient("aaa", "aaa", "aaa", "aa", "aa", "aa");
        theConnection.connect();
       catch (Exception ex) {
        System.out.println("Failed to connect to SAP system");
      private static void retrieveRepository() {
       try {
        theRepository = new JCO.Repository("saprep", theConnection);
       catch (Exception ex)
        System.out.println("failed to retrieve repository");
      public static JCO.Function getFunction(String name) {
       try {
        return theRepository.getFunctionTemplate(name.toUpperCase()).getFunction();
       catch (Exception ex) {
        ex.printStackTrace();
       return null;

    Hi Vicky,
    You need authorization to the S_TABU_DIS object, talk with the ABAP basis team about this to find the more restrictive role.
    It's not a good idea to use the RFC_READ_TABLE, for the wide permissions needed. You could think to develop a Z RFC for this.  You can check pros/cons in this document: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a83ec690-0201-0010-14ac-bd1d75e24a7d?overridelayout=t…
    Regards.

  • Access ABAP table in Webdynpro Java application

    Hi All
    Is it possible to access ABAP table in Webdynpro Java application
    Please provide your input
    Thanks
    Karthi D.

    Hi you will connect to the remote SAP system, the
    backend, using an Adaptive RFC MOdel. To access database tables, you can make use of existing functions in terms of RFC function modules. For each function module you need, the system generates a corresponding Java proxy class. All the generated proxy classes and interface are bundled together in the RFC model and treated as part
    of your Web Dynpro project
    In WebDynpro java you RFC by using Model :
    Adaptive RFC Model
    1. automatically adapts to changes in function module signature
    2 provides support for data types and extensibility
    3.support for different structure definitions in different backend
    systems (release dependent structures, custom adaptation)
    Basic principles and guidelines
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
    See this blog
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2brfc
    http://help.sap.com/saphelp_nw04s/helpdata/en/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
    Thanks,
    Tulasi

  • ABAP Table - Invoice number & accounting doc date

    Hi ,
    In which ABAP Table i can get invoice number and Accounting document date ?
    Srini

    Hi Srini,
    I guess what you're really asking is "How can I find the tables that contain certain fields".  So, if that is really your question you should check out a blog like this;
    /people/martin.english/blog/2010/01/13/finding-what-tables-and-fields-lie-behind-an-sap-transaction
    Otherwise, every time you need to find a table for a field you don't know you'll have to ask the forum.
    Regards,
    Nick

  • How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table

    Hello,
    How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table ?
    Thanks

    hi,
    Check out this link for sorting in Table.
    Sorting option in WebDynPro ABAP UI Table
    steps to follow :
    ->Have the data in internal table (itab).
    ->Now use sort command for the particular column which ever you want to sort.
      e.g sort itab descending by <Column>.
    ->Now you can bind the internal table with the Context Node which is binded to Table.
    I hope it helps.
    Thanx.

Maybe you are looking for

  • AWR - Database Performance Slow

    If my Whole Database Performance is slow, running AWR report include current time statistics when the DB Performance is slow ?

  • WAD result row in the name of the WAD report

    Hi, My requirement is we need to show summary of the result rows in front of WAD report output. Is it possible by any means please let me know. amit

  • Hello, problem with a movie that I bought

    a few minutes ago, I've  just bought The Hobbit in normal definition it cost 14 $.The point is that the HD version worths the same price than the normal , and i wanna know how can i get the HD  for free, or how to switch? T

  • Rear audio with audio usb card, hercules muse

    Hello, i have bought an audio usb card (hercules muse pocket lt), but i have a problem to use rear audio output. Using vlc player it works fine with all outputs (if it plays a dvd with sound 5.1), but with other softwares (itunes, dvd player..) it do

  • Idoc and bapi

    hi gurus,   what is the difference between bapi and idoc?