ABAP Table for DynamicConfiguration details of XML message in SXMB_MONI
Dear All
I have a requirement where I have to read the value from DCJMSCorreleationID property of message which is recorded in SXMB_MONI based on the SAP PI message ID.
I have 2 interfaces as below
Interface one (INT1) : JMS-PI-ECC --->Inbound interface to ECC when message is received on PI it will have DCJMSCorreleationID populated with some ID as shown below
Go to SXMB_MONI -->Inbound Message ---> SOAP Header --->DynamicConfiguration
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<SAP:DynamicConfiguration SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSCorreleationID">
a26c4276-9d5e-11e3-ba87-000004238292
</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/Message/30/general" name="senderAgreementGUID">dd3fb7c6b983314293e14ba59df1ad45</SAP:Record></SAP:DynamicConfiguration>
Interface Two (INT2):-ECC-PI-JMS----> Outbound from ECC where I am passing a SAP PI Message ID for INT1 in one of the field
Can I read this DCJMSCorreleationID for INT1 when INT2 is executed and have message ID for INT1 ?
Where are these SOAP hearder porperties like DCJMSCorreleationID are stored on ABAP table?
Thanks Jörg for your reply
I have a back up plan for ZTable approach but the only concern there is RFC calls for read and write
we have implemented a FM which gives the original payload using a std SAP functional modules FM SXMB_GET_XI_MESSAGE_INT and ECATT_CONV_XSTRING_TO_STRING
But I am looking for the SOAP Header information for DCJMSCorreleationID
So if there is anything which will help to read this DCJMSCorreleationID property easily form existing message SOAP header is really helpful
Similar Messages
-
Hi all,
What are the tables for delivery details.
What i want exactly is header and lines tables for one Delivery .
ThanksThanks Nagmohan...
And i want to know what are the tables get affected and the flow of process from the status to shipp confirm ..
Can you pls tell me patiently..
thanks -
budget abap tables for the cost element and commitment items,thanks.
Hi,
For budget information you have to look in RPSCO for rows with WRTTP = 41 and for actuals per cost element you look in COSS/COSP/COSSP/COSPP for rows with WRTTP = 4. Budget is stored at the object level and not at cost element level.
Regards,
Kenneth -
Problem occured when create a tree table for master-detail view objects using SQL queries?
I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK,
sum(
case when cntr_list.cntr_size_q = '20'
then cntr_list.cntr_qty
else 0 end ) as cntr20 ,
sum(
case when cntr_list.cntr_size_q = '40'
then cntr_list.cntr_qty
else 0 end ) as cntr40 ,
sum(
case when cntr_list.cntr_size_q = '45'
then cntr_list.cntr_qty
else 0 end ) as cntr45
FROM (
SELECT yb1.BLOCK_M as SOURCE_BLOCK,
scn.CNTR_SIZE_Q,
count(scn.CNTR_SIZE_Q) AS cntr_qty
FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
WHERE
scm.cmr_n = scn.cmr_n
AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
AND scm.shift_mode_c = :ShiftModeCode
AND scm.end_terminal_c = :TerminalCode
AND scm.start_terminal_c = yb1.terminal_c
AND scm.start_block_n = yb1.block_n
AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
AND scm.end_terminal_c = yb2.terminal_c
AND scm.end_block_n = yb2.block_n
AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
AND scn.status_c not in (1, 11)
AND scn.shift_type_c = 'V'
AND scn.source_c = 'S'
GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK
2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,
sum(
case when cntr_list.cntr_size_q = '20'
then cntr_list.cntr_qty
else 0 end ) as cntr20 ,
sum(
case when cntr_list.cntr_size_q = '40'
then cntr_list.cntr_qty
else 0 end ) as cntr40 ,
sum(
case when cntr_list.cntr_size_q = '45'
then cntr_list.cntr_qty
else 0 end ) as cntr45
FROM (
SELECT yb1.BLOCK_M as SOURCE_BLOCK,
yb2.BLOCK_M as END_BLOCK,
scn.CNTR_SIZE_Q,
count(scn.CNTR_SIZE_Q) AS cntr_qty
FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
WHERE
scm.cmr_n = scn.cmr_n
AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
AND scm.shift_mode_c = :ShiftModeCode
AND scm.end_terminal_c = :TerminalCode
AND scm.start_terminal_c = yb1.terminal_c
AND scm.start_block_n = yb1.block_n
AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
AND scm.end_terminal_c = yb2.terminal_c
AND scm.end_block_n = yb2.block_n
AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
AND scn.status_c not in (1, 11)
AND scn.shift_type_c = 'V'
AND scn.source_c = 'S'
GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
3. I create a view link to create master-detail relationship for these 2 view objects.
masterview.SourceBlock (1)->detailview.SourceBlock (*).
4. I create a tree table using these 2 view objects with master-detail relationship.
When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
Managed Bean:
DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
ViewObject vo = dc.getViewObject();
System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo.executeQuery();
System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
ViewObject vo1 = dc1.getViewObject();
System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo1.executeQuery();
System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
5. What's wrong in my implementation? I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.Hi Frank,
Thank you and it can work.
public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
Number highSalary) {
Row r = getCurrentRow();
if (r != null) {
RowSet rs = (RowSet)r.getAttribute("EmpView");
if (rs != null) {
ViewObject accessorVO = rs.getViewObject();
accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
executeQuery();
but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and I have to change current row manually like below.
any idea?
DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
ViewObject vo = dc.getViewObject();
vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo.executeQuery();
vo.setCurrentRowAtRangeIndex(0);
((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues(); -
ABAP table for "Condition table"
Dears,
Could you please tell the ABAP table for Condition table.
My requirement is : I need to check a field e.g. KUNNR, in which all the condition tables KUNNR is been used.
Thanks
pinkyHi,
Use t.code se16n, and then provide the sales order number for vbak,
or vbap take value of field KNUMV (The internal number under which
the system saves conditions that apply to a sales order header),
KNUMH (The internal number under which the system saves conditions
that apply to a sales orde itemr), and go to KONV (for vbak) and KONP
(for vbap) enter this KNUMV or KNUMH number and execute , you will get
all item pricing conditions for that sales order.
For pricing record :- table KONH - Condition (Header)
table KONP - Condition (Item)
with field KNUMH - Condition record number.
hope this will help.
regards
Vivek. -
Hi,
I am developing a soap web service using apache axis tool. I am using tomcat6 and jdk6. I need to return SOAPMessage as return object from remote interface methods. Now I have success fully deploy web service in tomcat. Also I have create client too, but when I am trying to call web service throw client then it show me a exception on client is
org.xml.sax.SAXParseException: Premature end of file.
and on server log, it show me this exception
java.io.IOException:
xisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.io.IOException: No serializer found for class com.sun.xml.messaging.saaj.soap.ver1_1.M
ssage1_1Impl in registry org.apache.axis.encoding.TypeMappingDelegate@98062f
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:java.io.IOException: No serializer found for class com.su
.xml.messaging.saaj.soap.ver1_1.Message1_1Impl in registry org.apache.axis.encoding.TypeMappingDelegate@
8062f
at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1507)
at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:980)
at org.apache.axis.encoding.SerializationContext.outputMultiRefs(SerializationContext.java:1055)
at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:145)
at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:478)
at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
at org.apache.axis.Message.writeTo(Message.java:539)
at org.apache.axis.transport.http.AxisServlet.sendResponse(AxisServlet.java:902)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:777)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:2
0)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:58
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
{http://xml.apache.org/axis/}hostname:EMRG-409964-L19
ava.io.IOException: No serializer found for class com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl
n registry org.apache.axis.encoding.TypeMappingDelegate@98062f
at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:317)
at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
at org.apache.axis.Message.writeTo(Message.java:539)
at org.apache.axis.transport.http.AxisServlet.sendResponse(AxisServlet.java:902)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:777)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:2
0)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:58
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
aused by: java.io.IOException: No serializer found for class com.sun.xml.messaging.saaj.soap.ver1_1.Mess
ge1_1Impl in registry org.apache.axis.encoding.TypeMappingDelegate@98062f
at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1507)
at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:980)
at org.apache.axis.encoding.SerializationContext.outputMultiRefs(SerializationContext.java:1055)
at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:145)
at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:478)
at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
... 19 moreI have deploy new version of saa-impl.jar and saaj-api.jar too. And I also have deploy webservice-rt.jar too in server lib and application lib folder. but still this exception is there. I dont understand, how can I over come from this error. If some one have resolved this type of exception then please reply. Please reply me on [email protected]
--Thanks in Advance
Umashankar Adha
Sr. Soft. Eng.
United StatesFYI, now I'm in work:
import javax.xml.namespace.*;
import javax.xml.rpc.*;
import javax.activation.*;
import javax.mail.*;
import com.sun.xml.messaging.saaj.*;
-classpath D:\jwsdp-1.3\jaxp\lib\endorsed\dom.jar;D:\jwsdp-1.3\jaxp\lib\endorsed\xercesImpl.jar;D:\jwsdp-1.3\saaj\lib\saaj-impl.jar;D:\jwsdp-1.3\saaj\lib\saaj-api.jar;D:\jwsdp-1.3\jwsdp-shared\lib\activation.jar;D:\jwsdp-1.3\jwsdp-shared\lib\mail.jar;D:\jwsdp-1.3\jaxrpc\lib\jaxrpc-api.jar;D:\jwsdp-1.3\jaxrpc\lib\jaxrpc-impl.jar;D:\jwsdp-1.3\jaxrpc\lib\jaxrpc-spi.jar;D:\jwsdp-1.3\jwsdp-shared\lib\jax-qname.jar
Those are what I had to use to get it working.
Chris -
Hi,
What is the table for plant details on Material Basis?
ThanksHi,
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
Reward of helpful -
Hello
plz suggest Table for batch detail for sale & purchase in SAP 8.81 pl 07hi Jayakumar
In Sap b1 8.8 the batch tables have been changed
Category Old Tables New Tables
Batch Number OIBT, IBT1, OSRD OBTN, OBTQ, OBTW, OITL, ITL1
i think this will solve
Regards
Jenny -
What is the payload structure has to be used for AQ to process XML messages.
Hi Experts,
We have an IBM MQ and Oracle AQ has to be be linked to that.
MQ always contains XML messages and same message will come to AQ.
Now I want to create AQ. What is the payload structure(object) has to be used for AQ to process XML messages.
Please help me.
Thanks.Hello,
using XML type data in AQ you have to define a special AQ payload type
(corresponding to MQ): QUEUE_PAYLOAD_TYPE = 'SYS.MGW_BASIC_MSG_T'.
An example template for enqueueing looks like (you have to transform
from XMLTYPE to the MGW payload type):
DECLARE
queue_options DBMS_AQ.ENQUEUE_OPTIONS_T;
message_properties DBMS_AQ.MESSAGE_PROPERTIES_T;
message_id RAW(16);
v_message SYS.XMLType;
v_clob CLOB;
v_payload SYS.MGW_BASIC_MSG_T;
v_text_body
SYS.MGW_TEXT_VALUE_T;
BEGIN
v_message := SYS.XMLType.createXML('<SAMPLE>hello world</SAMPLE>');
v_clob := v_message.GETCLOBVAL();
v_text_body := SYS.MGW_TEXT_VALUE_T( NULL, v_clob );
v_payload := SYS.MGW_BASIC_MSG_T( v_header, v_text_body, NULL );
DBMS_AQ.ENQUEUE( queue_name => 'my_queue',
enqueue_options => queue_options,
message_properties => message_properties,
payload => v_payload,
msgid => message_id);
END;
Kind regards,
WoG -
Abap tables for adapter engine errors
Hello,
Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables?
Any help is very much appreciated.
Thanks
MLSHello,
What I am trying to do is write a report in ABAP, which will read the table for errors (for messages which are not processed successfully in Integration engine or adapter engine) and email those errors to users. If there is communication channel error in RWB, the message in sxmb_moni is still shown as success and is not being updated in table SXMSPERROR.
We cannot use PI Alerts here since the email list is dynamic for the same PI interface.
Any ideas on how to accomplish this?
Thanks
MLS -
Abap report for PO details including the person releasing the PO last.
Hi gurus,
I need to create a abap report for the purchase order details. I am finding difficulty in getting the last person who released the PO. Can anyone tell me how can I get the person who released the PO last ??
From which table I can get this detail ??Hey hi ,
thanks for your reply,
Actually , I already went through the tables before, but here, there is one scenario listed below which is creating the problem :
1. There are two person related with the release of PO and either of the two can release the PO ( in other's absense ). Now, how to check who released the PO among the two. Here link with the PO is necessary as the person released this PO might not release the next PO.
Thats why i feel the link of the PO must be existing based on release code too. As suppose the organization assign another manager to release the PO, it should not affect previous PO's released by the Old manager.
thanks
Edited by: kanak bhandari on Feb 6, 2008 1:19 PM -
ABAP Table for Integration Directory Objects
Hi
Is there any ABAP table, which stores the runtime objects, communication channel, It's status, Service etc.
Where you can find out status of each channel and the channel type used within the ABAP stack in Data Dictionary table.
Replies apprecriated.
SwetankHi Paresh,
To view the status of adapters you can use RWB.
You dont need to write an ABAP report for this purpose.
RWB->Component Monitoring->Click on Displaye with status "all".
Then..click o Integration Server->Adapter Engine
click on 'Adapter monitoring' in the the 'Status' tab page of the window at the bottom of the screen.
This will launch a widow with status details of all the monitors.
Hope this info helps you.
praveen -
I want to know the name of the following tables:
Vendor Master (General level)
Vendor Master table (purchase organization level)
Vendor Master (Company Code Level)
I used LFM1 table but could not find vendor name there. I want details like vendor, purch organisation, company code, reconciliation account, vendor name.
Moderator: Please, search SDNDear:
I have these details regarding master data saved in word file . Please follow given below tables for vendor master data information
Vendor Master (General Section) u2013 LFA1
Vendor Master (Company Code) u2013 LFB1
Vendor master (VAT registration numbers general section) u2013 LFAS
Vendor master (dunning data) u2013 LFB5
Vendor Master (Bank Details) u2013 LFBK
Vendor master record (withholding tax types) X u2013 LFBW
Vendor master record purchasing organization data u2013 LFM1
Vendor Master Record: Purchasing Data u2013 LFM2
Partner Functions - WYT3 -
Tables for Catalog details...
Hi,
I'm new to CCM. Can any one let me know the details of the tables or reports where I can find the following details:
1. Catalogue Number
2. Date on which catalogue was created
3. Who had created the catalog.
4 Whether any changes were done for the catalogue
5. When the changes were done & who had done the changes.
It will be really helpful if any one can send me the material on CCM.
Wishes & Regards,
Mahesh. JHi,
All the CCM tables are stored under Table names </CCM/>
You can also check these reports in SE38... There are more of them, do a search on /CCM/*
Report Name Description. Attention / additional hints
/CCM/CLEANUP_CATALOG Deletion / Cleanup of catalogs. May be dangerous since all catalogs can be deleted via this report! The report is needed if an upload crashed in order to delete the temp. version of the uploaded catalog.
/CCM/PATCH_CATALOG Needed if data migration was necessary between two support packages in order to migrate the data.
/CCM/VERIFY_CATALOG Prints out a list of the database content of a catalog.
Options on the selection screen for Item valuations, includes deleted objects, views etc.
/CCM/CATALOG_CME_DATA Shows the predefined characteristics / data types
Shows the characteristics / data types of a catalog.
Can be used to check the data (e.g. alias, aspects) of predefined characteristics
/CCM/VISUALIZE_MAPPING Displays the mapping tables for a given catalog ID
/CCM/INITIALIZE_CME Initializes the predefined data types / characteristics. Used to initialize the catalog
BR,
Disha.
<b>Pls reward points for useful answers.</b> -
Table for Billing Details(in Sales Area Data) in BP
Hi,
Can you let me know the table name for Billing Details(in Sales Area Data) in BP xn.
Please Help.
NeerajHi,
CRMD_BILLING Contains billing related information.
see these tables also..
CRMD_BILLPLAN
CRMD_BILLPLAN_D
CRMD_BILLPLAN_DA
Regards
Srinu
Maybe you are looking for
-
Mail says my home directory is full
I've been having some major system problems of late. Following the successful restoration of my laptop's hard drive today I launched Mail. It was very sluggish & came up with the error message: "Mail cannot update your mailboxes because your home dir
-
Any idea on how to do this on Pages
Would love to be able to do this. I need a BMI ready reckoner but want to modify the content to my own needs. How would I go about doing this? Thanks all. http://assets1.tribesports.com/system/challenges/images/000/000/615/original/201 10518204839-ge
-
Usage of ALE - idocs generated for BAPIs
Hi I need to use - the std idocs generated for BUS2032 object - CREATEFROMDAT2 method to store the BAPI call ( BAPI_SALESORDER_CREATEFROMDAT2 )data for those sales orders that could not be created. If I want to use the SAP delivered BAPI ( BAPI_SA
-
Hello Everyone, I recently bought an iPad2. When I synced it to my iTunes account, I knew that all of the apps I have purchased that work on the iPad and iPhone would be transferred to my iPad. I didn't think any iPhone only apps would be transferred
-
Hello all, please could anyone suggest what MAC OS are supported on VMWare guest OS. i've checked the supported guest OS list in vmware fusion, they menitoned about 150 OS which include Snow Leapord but mac desktop OS is not specifically mentioned. i