Table for batch detail

Hello
plz suggest Table for batch detail for sale & purchase in SAP 8.81 pl 07

hi Jayakumar
In Sap b1 8.8 the batch tables have been changed
Category Old Tables New Tables
Batch Number OIBT, IBT1, OSRD OBTN, OBTQ, OBTW, OITL, ITL1
i think this will solve
Regards
Jenny

Similar Messages

What is the field and Table for "Batch Class" and "Class Type" in QM.

Hi All,
What is the field and Table for "Batch Class" and "Class Type" in QM.
Thanks,

Hi,
For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
In INOB table, for batch class, you need to give 023 in KLART field and value MCH1 in OBTAB filed.
Please check this and let me know if this you need any more details?

Tables for delivery details

Hi all,
What are the tables for delivery details.
What i want exactly is header and lines tables for one Delivery .
Thanks

Thanks Nagmohan...
And i want to know what are the tables get affected and the flow of process from the status to shipp confirm ..
Can you pls tell me patiently..
thanks

Problem occured when create a tree table for master-detail view objects using SQL queries?

I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK
2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           yb2.BLOCK_M as END_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
3. I create a view link to create master-detail relationship for these 2 view objects.
masterview.SourceBlock (1)->detailview.SourceBlock (*).
4. I create a tree table using these 2 view objects with master-detail relationship.
When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
Managed Bean:
        DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
        ViewObject vo = dc.getViewObject();
        System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo.executeQuery();
        System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
        ViewObject vo1 = dc1.getViewObject();
        System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
        System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo1.executeQuery();
        System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
5. What's wrong in my implementation? I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.

Hi Frank,
Thank you and it can work.
public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
                                                                          Number highSalary) {
        Row r = getCurrentRow();
        if (r != null) {
            RowSet rs = (RowSet)r.getAttribute("EmpView");
            if (rs != null) {
                ViewObject accessorVO = rs.getViewObject();
                accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
                accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
            executeQuery();
but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and I have to change current row manually like below.
any idea?
            DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
            ViewObject vo = dc.getViewObject();
            vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo.executeQuery();
            vo.setCurrentRowAtRangeIndex(0);
            ((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues();

Table for Plant Detail

Hi,
       What is the table for plant details on Material Basis?
Thanks

Hi,
MARA                             General Material Data
MARC                             Plant Data for Material
MARD                             Storage Location Data for Material
Reward of helpful

Tables for batch and movement type

Hi all!
We have to show the batch data after GR is done with respect to different movement types. I got a table CHVW which gives the data for batch , movement type ,material and quantity.But data for 302 and 541 movement types is not updating in this table.Is there any other table for these two movements?Please suggest.

Hi,
pls use below table's
MSEG - Detail Material Document
MKPF - Header: Material Document
Regards,
Sankaran

Table for batch determination date

hi,
im printing the Dispensing slip...they want the output based on the batch determination date..
can any one tel me in which table i willl get batch determination date?
Regards
Smitha

Are you using a separate batch selection class versus the batch class?
There are characteristics that must be in the selection class, but cannot be in the batch class.
See OSS note 33396.
1. If you want to search for batches on the basis of a remaining shelf
         life in batch determination, the system has to calculate a requested
         shelf life expiration date dynamically from the information you
         give.
     2. Add characteristic LOBM_VFDAT to the batch classes.
         For the revaluation of reference characteristics, refer to Note
         78235.
         Characteristics LOBM_RLZ and LOBM_LFDAT must not be included in the
         batch classes!
     3. Add characteristics LOBM_VFDAT, LOBM_LFDAT, and LOBM_RLZ to the
         selection classes.
         Maintain a remaining shelf life in the strategy records for batch
         determination. Relational operators (> , < , <= , >=) are considered
         in the dynamic calculation of the shelf life expiration date in
         batch determination.
From your note you have placed LOBM_RLZ and LOBM_LFDAT in your batch class. You cannot do that.
FF

Tables for Vendor details

I want to know the name of the following tables:
Vendor Master (General level)
Vendor Master table (purchase organization level)
Vendor Master (Company Code Level)
I used LFM1 table but could not find vendor name there. I want details like vendor, purch organisation, company code, reconciliation account, vendor name.
Moderator: Please, search SDN

Dear:
I have these details regarding master data saved in word file . Please follow given below tables for vendor master data information
Vendor Master (General Section) u2013 LFA1
Vendor Master (Company Code) u2013 LFB1
Vendor master (VAT registration numbers general section) u2013 LFAS
Vendor master (dunning data) u2013 LFB5
Vendor Master (Bank Details) u2013 LFBK
Vendor master record (withholding tax types) X u2013 LFBW
Vendor master record purchasing organization data u2013 LFM1
Vendor Master Record: Purchasing Data u2013 LFM2
Partner Functions - WYT3

Tables for Catalog details...

Hi,
I'm new to CCM. Can any one let me know the details of the tables or reports where I can find the following details:
1. Catalogue Number
2. Date on which catalogue was created
3. Who had created the catalog.
4 Whether any changes were done for the catalogue
5. When the changes were done & who had done the changes.
It will be really helpful if any one can send me the material on CCM.
Wishes & Regards,
Mahesh. J

Hi,
All the CCM tables are stored under Table names </CCM/>
You can also check these reports in SE38... There are more of them, do a search on /CCM/*
Report Name Description. Attention / additional hints
/CCM/CLEANUP_CATALOG Deletion / Cleanup of catalogs. May be dangerous since all catalogs can be deleted via this report! The report is needed if an upload crashed in order to delete the temp. version of the uploaded catalog.
/CCM/PATCH_CATALOG Needed if data migration was necessary between two support packages in order to migrate the data.
/CCM/VERIFY_CATALOG Prints out a list of the database content of a catalog.
Options on the selection screen for Item valuations, includes deleted objects, views etc.
/CCM/CATALOG_CME_DATA Shows the predefined characteristics / data types
Shows the characteristics / data types of a catalog.
Can be used to check the data (e.g. alias, aspects) of predefined characteristics
/CCM/VISUALIZE_MAPPING Displays the mapping tables for a given catalog ID
/CCM/INITIALIZE_CME Initializes the predefined data types / characteristics. Used to initialize the catalog
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Table for Billing Details(in Sales Area Data) in BP

Hi,
Can you let me know the table name for Billing Details(in Sales Area Data) in BP xn.
Please Help.
Neeraj

Hi,
CRMD_BILLING Contains billing related information.
see these tables also..
CRMD_BILLPLAN
CRMD_BILLPLAN_D
CRMD_BILLPLAN_DA
Regards
Srinu

How to create a database table for educational details

how to create table for this image. i have to develop a job portal website. i created all the tables that required. but i dont know how to store these fields in table. any one help me plz

It would need following tables
1. Employee table where EMpNo field would be included as an attribute. Other fields would be EmployeeName,Designation, ...
It will have Primary Key as EmpID
2. QualificationType table with QualificationCategoryID and QualificationCategory with values Highest Qualification Post Graduate etc
QualificationCategoryID is the primary key
3. QUalificationTypeAttributes tables with fields as QUalificationTypeAttributeID,QUalificationTypeAttributeName
QUalificationTypeAttributeID is primary key
and QUalificationTypeAttributeName will have values Institute Name, Qualification Category etc
4. EmpQualificationTypeValues table with fields
QUalificationTypeValueID, QUalificationTypeAttributeID , QualificationCategoryID , EmpID, Value
QUalificationTypeValueID would be the primary key
for above case values would be like below
Employee
Emp ID EmpNo Name ...
ID1 12345 xxxxxxx
QualificationType
QualificationCategoryID QualificationCategory
CatID1 HIghest Qualification
CatID2 Post Graduate
QUalificationTypeAttributes
QUalificationTypeAttributeID QUalificationTypeAttributeName
QTAID1 Institute Name
QTAID2 Qualification Category
QTAID3 Year Of Passing
QualificationTypeValues
QUalificationTypeValueID QUalificationTypeAttributeID QualificationCategoryID EmpID Value
QTVID1 QTAID1 CatID1 ID1 Your institute Value set from screen for highest qualification
QTVID2 QTAID2 CatID1 ID1 Your qualification category Value set from screen for highest qualification
QTVID3 QTAID3 CatID1 ID1 Your year of passing value set for highest qualification
QTVID4 QTAID1 CatID2 ID1 Your institute Value set from screen for post graduate
QTVID5 QTAID2 CatID2 ID1 Your qualification category Value set from screen for post graduate
QTVID6 QTAID3 CatID2 ID1 Your year of passing value set for post graduate.....
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

WHAT ARE THE TABLE for PO details ?

Hi,
Does any body know Table for Total PO Value .
Kindly help
Sure shot Rewards if helpfull
Regards

Hi,
Table EKPO -NETPR at item level
Diwakar
Edited by: diwakarnd deshpande on Oct 17, 2008 11:04 PM

Table for BAtches With ref to Last GI date --URGENT ****

Hello Experts,
I'm working on a query, SQ01 for Credit dept. I'm trying to capture the data that the user wants, which includes last goods issue date. I've joined MBEW with MAKT, but the user also wants batch number which comes from MSEG and last goods issue date
CAN YOU TELL ME HOW TO PULL BATCH AS PER LAST GOODS ISSUE DATE >>>WHICH TABLE TO LOOK ..Very Urgent
Justin

Hi,
If your batch mangement is "cross plant" you can read the table MCH1, if not you are using MCHA. Field: LWEDT
Rgds,
JP

Table for Idoc details including messageID

Hello All.
Is there any table in ECC end , where we can get inbound iDoc details including message ID (which is same as that of Message ID of XI sender system )
I need to find this MessageID information for thousands of IDoc.
Normally we need to open each idoc control structure's Detail tab to find this.
Thanks,
Shiv

Hello Avinash,
I already seen in tables EDIDC and EDIDS but not able to find the message ID details of sender system (XI system ) .
Thanks,
XI team

Table for getting details in segment of Allocation (Tcode GA13)

Hi Guy,
I need a table which shows that in a certain Allocation cycle (Tcode GA13), how many segments are there and in those segments the details of sender/receiver (all the detailed attributes)
I could not find any database table just table T811C which shows the Cycle details but not for any segment details.
-JR

Hi Ravana,
go for T811S Allocation Segments
Regards JMy

Table for batch detail

Similar Messages

Maybe you are looking for