ABAP webdynpro events in Portal

Hi All,
I am a novice in Portal. I am not sure if this is the right forum also to ask this question.
I created an application in ABAP webdynpro , created an iview using the ABAP webdynpro option.
My scenario : I have to create a work request in a ztable that I have created.
For this 1) create a uniques number using number_get_next
2) insert the values into the z table and show message
what is happening -->
Application appears with no problems.
when I click on button message appears
What is not happening on the portal
number get next doesnot get created
data doesnot get inserted in ztable
portal and abap webdynpro are on different URL
I tried to subscribe events that also didnot work .:(
Appreciate all the help.
Regards,
Narayani

Hi All,
solved as below.
Regards,
Narayani

Similar Messages

Integration of ABAP webdynpro with JAVA portal

Hi ,
Could any one give me a simple procedure or step by step process to integrate the abap webdynpro with java portal . The RFC and stuffs ?
Regards,
Sakthi

hi,
please check out the link :
http://help.sap.com/saphelp_nw04/helpdata/en/74/d5e7418192c717e10000000a155106/frameset.htm
hope this will surely help you!!!
thanks & regards,
punit raval.

How to create an iview for ABAP Webdynpro Application in Portal?

HI,
I am Webdynpro Java webdynpro developer.
I want to create an IVIEW for an ABAP Webdynpro application in the enterprise portal.

The process is almost exactly the same as creating a Web Dynpro Java iView. You simply chose the ABAP instead of the Java radio button when you reach that step in the Web Dynpro iView creation process. There is a video on the topic here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/eae111e7-0b01-0010-6cb7-e0dd2bfbfa7a
You can also read about the process in the online help:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1d/e4a34273f60b31e10000000a1550b0/frameset.htm

Need to open an ABAP WebDynpro application from Portal UWL work item

Hi All
I need some suggessions on how to navigate to an ABAP WebDynpo application iview from a mail(Work Item) in portal UWL.
Requirement in detail:
Agreements will be created from portal( Agreement Creation Application is developed in ABAP webDynpro and iview has been created with in the portal for this WD application). as and when the agreement is created a mail (ECC Workitem) should trigger to the approver, who has access to portal and check the mail(Work Item) from the portal UWL.
The mail body should consist the link to the Agreement created in portal ( Link to navigate to the Agreement Creation ivew).
So, the main requirement is user should navigate to the Agreement creation iview when he open the mail from UWL.
Mail can be sent from ECC by using ABAP Function modules or by creating a workflow
Please advice me on how can we achieve this requirement.
Thanks & regards
Vijay Bedamsetty
Edited by: VIJAY BEDAMSETTY on Apr 19, 2011 5:42 PM

Hi,
You can call the iView directly by using NavigationTarget..
http://myServer:50000/irj/portal?
NavigationTarget=ROLES://portal_content/myFolder/myRole/myIview
Plz note that the iView you are calling should be part of a Role.
And the PCD location of the iView in the Role must be given for Navigation Target.
Check this URL
http://help.sap.com/saphelp_nw04s/helpdata/en/43/014421d21d6fade10000000a11466f/frameset.htm
Thanks
Prashant

ABAP Webdynpro reports in portal do not use portal theme for some elements

Hi,
I have an ABAP webdynpro screen which uses, amongst other things, a date navigator and drop down lists. All aspects of the portal theme seem to be picked up by the webdynpro except the date navigator and drop down lists. They don't even use the SAP standard ones. They display as plain text using TimesNewRoman font and not the ones specified in the theme. They also do not use any of the colours in the theme. All tables and fields etc are all themed ok. Any ideas how I can fix this?
Regards
Cindy

Could there be a lockal cache issue?
Clear you browser cache via Tools > Internet Options > Delete History
Try again after clearing the cache, if that doesn't help then try downloading the Internet Explorer Developer Toolbar:
http://www.microsoft.com/downloadS/details.aspx?familyid=E59C3964-672D-4511-BB3E-2D5E1DB91038&displaylang=en
...use this tool to get details about the css and classes aplied to the objects and use it to open a OSS message if it is a SAP WebDynpro application of talk to your developers if it is a Custom WebDynpro app.
Good Luck,
Benjamin Houttuin

How to find the ABAP Webdynpro Component Name in the Portal IView(WDA)

Hi All
I got one ABAP Webdynpro IView in portal , when i opened the Iview i got the Application name of ABAP Webdynpro in the properties of the Iview but i could not able to find the component name .
Please let me know how to find the component name of WDA , as i already got the Application name of component from Iview i.e WDA_ED_RDF ( this is applicaiton name found in the portal Iview for ABAP Webdynpro)
Please get back to me on the same , it would be great help to me.
Thanks,
PortalUser100
Edited by: PortalUser100 on Mar 24, 2011 11:51 PM

Hi
Right Click on any UI Element in Portal->Go to more field help->TEchical Information. You can see all the information about component, application, ui elements etc.
Please check this... may helps more
http://wiki.sdn.sap.com/wiki/display/WDABAP/GeneralTechnicalAspects
Thanks,
Venkat.

ABAP Webdynpro Rendering issues after ECC Upgrade

Dear All,
We recently upgraded ECC to EHP 7 (Netweaver 7.4) but our Portal is still at Netweaver 7.0 EHP2 SP16.
The ABAP Webdynpro iViews in Portal have the following issues. ( We use IE11).
1. The ABAP Webdynpro Table filtering is not working. When I click the filter button it does nothing.
2. The cursor in the Input fields reset back to the first position while typing and create a big mess.
Any help appreciated.
Thank you.
PK

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Access web dynpro abap application from external portal.

Hi
How can a application made in ABAP be accessed from SAP External Portal.
Like a java web dynpro application could be easily accessed by making a webDynpro Java ivew in portal.
Is their any method to access a ABAP application similarly.
Thanks.

Thomas
Here is our scenario
We want to expose an ABAP webdynpro application using ABAP Webdynpro iView in portal to the internet. Does this scenario use the ITS http server / port like URL iview behind the scenes.
Can you please share more info on the above scenario.
Thanks in advance
Lakshmi

Java Portal Event not received correctly by ABAP Webdynpro

We have a page that contains 2 iviews.
iView 1 contains the MSS Employee Search that raises portal event:
Namespace: "urn:com.sap.mss.employeesearch"
Name: "selection_changed"
The second iview contains an ABAP Webdynpro program that subscribes to the Portal event.
The issue is that the event in the ABAP webdynpro is not being triggered. It does get triggered if we first fire the event from the Java program, unsubscribe the event in the ABAP program them subscribe to the event in the ABAP program. The event gets triggered at this time and the parameter can be retrieved.
If the event is fired a second time, nothing happens in the ABAP program.
The abap program works fine when another abap program triggers the same portal event.
Also, the portal event is being picked up correctly by other SAP delivered JAVA programs. I just cannot get a custom ABAP Webdynpro program to work...
Any ideas, comments?
Glenn

Hi Glenn,
Are you using https? Is your j2ee stack and abap stack in the same domain? In the past I have found that https can cause issues in the event communication between different applications.
Cheers,
Dion

ABAP webdynpro app not redirecting using Outbound plug in portal

Scenario-
There is one Abap webdynpro application APP1 calling another abap webdynpro component Comp 2 through outbound plug on a button click. This is working fine if service is tested independantly.
SAP ECC system is having a webispatcher and the application should be accessed using webdipatcher only i.e. ECC should not be called directly.
SSL has been configured b/w ECC and webdipatcher.
The Abap webdynpro application APP1 is integrated into portal using Abap webdynpro iview.
Setting in Portal system are reffering to Webdipatcher for ECC system instead of ECC system directly.
Issue-
App1 is loading successfully into portal and all the data is coming properly but when trying to navigate to second component on button click it is not navigating. iview is getting refreshed but not redirecting to required component and is still on the same application.
Please suggest the reasons and solutions if anyone has clue about it.
Regards
Deepak

Hi,
Please refer to these links -
How to secure WDA over an external facing portal
WebDynpro ABAP and Portal Navigation
WebDynpro ABAP and Portal Navigation problem
Please check for the portal eventing between the applications.
Regards,
Lekha

How to set portal authorization in ABAP Webdynpro application

Hi All,
Do you have an idea how to set the visibility for Group UI element based on the Portal user authorization in ABAP Webdynpro , for example if the portal user A(or group A), logins into the portal on click of the ABAP Webdynpro IView then we need to set invisible (hide) the Group UI element in webdynpro ABAP Application.
Do you have any sample code on the same to handle the portal authorization in Webdynpro ABAP?? , please let me know if couldnu2019t understand this requirement or my explanation
Thanks,
PortalUser100

Hi Kris,
Thanks for your reply.
Like however we passed the UserID, can we pass Group ID also to the ABAP Webdynpro application??
Can u get me other things, how to copy of the existing component and i want to give the new name for the component and there i need to modify, i dont want to disturb original component before copy...let me know the procedure for the same??
Regards,
PortalUser100

Using customize portal theme for abap webdynpro.

Dear all,
I have a customized portal theme where we used different color for the portal. When I create a abap webdynpro application for a workflow task (the application will launch when user click on the item in the UWL). When the application launch, it does not use the customized portal theme instead it just use the standard theme.
Anyone knows where can I configure it?
Thanks
Regards
Bryan

Hi Brian,
You can change the color of a table only if u have the Textview as UI element for cell.
You can change the semantic color property of textview.
Please check this.
I would suggest you to use ALV instead of Table as you can change its colors easily by using functions like SET_DESIGN
GET_DESIGN of IF_SALV_WD_TABLE_SETTINGS.
I hope it helps.
Please revert back with issues.
Regards,
Sumit Oberoi

Abap web dynpro and portal events

First off, a little introduction: My name is Martin Kroppen, I am an Abap developer for SAP Netherlands, and I am currently involved in a project for hospitals to built a portal. For this, I have created 2 Abap web-dynpros, and then impemented the views as iviews in an EP. What I want to achieve is that the input view triggers the display view on a second page, and the data is shown for the values in the input view (all in the same browser window).
I am using the portal integration manager for this, with the method for relative navigation.
The navigation is working fine, only problem is that I don't know how to handle the business parameters that I send over.
My questions are:
1. is this the correct way for navigating between abap webdynpro iviews in the portal?
2. what is the correct way to read the business parameters into my context of the second Abap WD application?
I tried the solution that is described below, I could not get it to work correctly.
If you define BUSINESS_PARAMETERS as application parameters in your Web
Dynpro application and the parameter names start with ″APP″, they will
automatically be forwarded to the startup plugs of the Web Dynpro application
provided they are marked as startup parameters. In this case, keep in mind that
the iView/page used as the navigation target must be assigned to the user role.
If it is not, navigation cannot be triggered.
Hope someone can help me
Regards
Martin Kroppen

Hi,
please refer to this link for portal integration
Web Dynpro for ABAP Portal Integration [original link is broken]

Restarting or Reloading Webdynpro ABAP(FPM) application in Portal

Hi All,
I have created a ABAP webdynpro application in FPM framework which is run in the portal. The application has got a roadmap that contains 7 steps. In the last step there is a button 'save and exit'. When the user reaches the last step and presses the 'save and exit' button, one popup will appear with a 'close' button. When the user pressed that 'close' button, the application should restart i.e., the user should be taken to the first step. I tried using the method 'NAVIAGATE_ABSOLUTE' where I hardcoded the PCD path which takes the user to the first step but it is not helpful ( All Relative navigation links and Detailed navigation links were missing in portal ) in my case as it is not actually restarting the application. Could anyone help me out in getting the application restarted in the portal on click of a button.
Note: We tried with Exit-Plug as well, which is not applicable ( helpful) for portal integration.
Please suggest.
Thanks
Deepak

Hi Deepak,
Well we have few webdynpro applications with multiple views, by design, on the last step after save, we disable all other button and display a new button called 'RESTART' with only available choice. On click of this button
1. We initialize all the data of component.
2. Clear stored variable parameters & internal table used by assistance class
3. if everything was fine fire navigation to the FirstDefaultView of the webdynpro application.
Thus its almost restart of the application.
So design wise have a method INIT_COMP in the component controller of webdynpro component. and then at the last step when call to RESTART is made reinitialize all the data of your webdynpro component.
method onactionrestart.
wd_assist->reinit_my_obj_tables( ).
wd_this->fire_to_v_Start_plg( ).
endmethod
Greetings
Prashant

ABAP Webdynpro portal integration

Hi everyone,
I created an ABAP WebDynpro Application, and now I'd like to integrate it into our company ESS portal.
How can I do this? I search the SDN, and the Internet for documentation and already done some parts:
1. SPRO -> Created the Rersource, Service, and assigned the service to a subarea
2. Portal Content administrator-> Created the iView for the ABAp Webdynpro application
But still, I can't even see the link in the portal to my new WDP application..... Can you please tell me what is missing?
Thanks.
N.G.

Hi,
When you have created the the WD ABAP iView you must have placed this in a page in a workset in a role.
You have to provide the navigation path for your iview link.
please see this link
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/bed5aa8697307ce10000000a42189b/frameset.htm
Thanks
Pradeep

ABAP webdynpro events in Portal

Similar Messages

Maybe you are looking for