Able to change the borders of panels etc. but not tabbedpane???
hi!
i am able to set the borders of panels, frames, almost everything to lineborder but when i do this for tabbedpanes, nothing happens and i still get shadowy borders for it...
what culd be the reason??/
This adds a rectangular border around the entire tabbedPane. (However, I suspect that this is not what you are trying to do)
tabbedPane.setBorder( BorderFactory.createLineBorder(Color.red) );
I think this is what your are asking for. (Add this code at the start of your program);
UIManager.put("TabbedPane.highlight", Color.blue );
UIManager.put("TabbedPane.lightHighlight", Color.blue );
UIManager.put("TabbedPane.selectHighlight", Color.blue );
UIManager.put("TabbedPane.shadow", Color.red );
UIManager.put("TabbedPane.darkShadow", Color.red );
Similar Messages
-
I want to change the description of my photos, but not all change
I want to change the description of each photo, but not all change.
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.*** -
Hi- I need to batch process images for video project. I am able to change the pixel dimensions in the image processor but don't seem to have the option to change image size in inches. Please advise! Thanks
You don't need inches for video (or screen viewing in general). It all goes by pixel count. Inches is for print, nothing else.
But to answer the question, you can run actions in the Image Processor, and this is where you set size in inches. Just bring up Image Size, uncheck "resample image", and specify size. You'll notice resolution changes to reflect the fact that the existing image pixels are now redistributed over the new print size.
But again, screen doesn't care about size or resolution. It only counts pixels. -
When I connect my Ipod nano my automatic itunes account is using my old email address. This address does not exist anymore and even if it did I have forgotten the password. How am I able to update the idtunes account to be my current one and sync all the new stuff I have downloaded from my Iphone or on my laptop?
any ideas please
DapetteHi bsavino2,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes Store: Changing account information
http://support.apple.com/kb/HT1918
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Cheers,
- Judy -
I would like to change the equalizer for a playlist but not by individual song
I want all of the songs in a playlist to have the equalizer set to "Dance". I find changing each song individally to be time consuming and tedious. Is there a way to do it all at once.. like Command-A does for selecting all in other applications?
You can open multiple songs at once to set same EQ or other common values like compilation. To select multiple songs, hold the Command key while selecting the songs. Once you have all the songs you want selected, right-click and select Get Info.
You may be prompted that you are opening multiple songs or maybe when you apply the change. You will see a subset of normal Get Info items as some cannot be done to multiples. You will see the EQ in the Option tab. Changing here will modify all selected songs.
Command-A does select all in the list but probably not as practical as selecting a group of songs or an album set. I do this all the time for my dance/electronic albums. -
HT202033 Am I able to change the back panel in Apple iPhone 5c
Am I able to change the back panel in Apple iPhone 5c
I did a search and couldn't find anything. I think your best bet would be covering it with a slim case to change the look.
-
my past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?
You can contact iTunes support and request that they remove the $0.68 from your account here:
http://www.apple.com/support/itunes/contact/
They should respond within 24 hours. -
Not able to change the the Contract Line Item Payer
Hi there,
I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
I checked the credit management assignment and the Business partner is assigned with the required Payer.
Request your help.
Thanks,
RenjithHi Renjith
So first of all check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
As you are getting error '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
Regards
Srinath -
User should not be able to change the payment terms
Dear All,
My issue is that user should not be able to change the payment terms in any of the document.I have tried to do it through authorization but it is not working out.
Mona.Dear Mona,
This may only be done through SP_Transaction_Notification.
Thanks,
Gordon -
Not able to change the roles through the ERM after uploading from ECC
Hi
We are not able to do the following activities after uploading the roles into ERM from Backend system
1) We are not able to see any transaction data but we are able to see org values.
2) We are not able to change the roles from ERM.
Vserion and support pack leavel : GRC5.3 and 13
Please help in this.
Thanks in advance.
With Best Regards,
supportHow are you trying to do this? using oiddas ?
Can you explain more in detail?
Greetings. -
Not able to change the Valuation class of a Material
Hi Team,
I am not able to change the Valuation class of a Material even if the stock is zero.
Please assist.
Thanks in advance.
ChetanHi Chetan,
Please check if any open PO for this Material exist, if it is there, delete it and try to change VC.
Thanks,
Ninad -
Not able to change the price of PO
Hi All,
I am not able to edit the price on PO.
Materail is free text catalog orders from SRM, I am not able to change the price.
Could you please help me in changing the price.
Is there any other steps i need to do to change the price.
ThanksHi there,
Is it greyed out or do you get an error?
Are there any follow-on documents?
Regards,
Matthew -
I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting
I have an iPhone 4 also. If you are referring to the flyover view, its unavailble for the iPhone4. If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
Hope this helps -
Not able to change the original system of the object
Hello
BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
I would like to change original system from Q01 to D01 to enable object modification.
I am not able to change the original system of the object in the tran se03 as system is disabled.
Original System Q01 (grey)
Any solution for this ?
thankshi,
before transporting maintain the settings in the Dev system as follows.
Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
In this maintain the
Original source system Target source system
Technical name of R/3 client of test Technical name of R/3 client of dev system
This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
regards,
Arvind. -
Would love to be able to change the Standby settings.
I would love to be able to change the Standby settings on my itouch. Particularly when I have my itouch plugged into a charging unit or computer. I would like the standby to not turn off my itouch screen when it has external power. Is there a way to do this?
Well, hopefully a developer can help and update the device to allow us to do just that. Perhaps one can tell us if they might consider working on just such an option. I mean seriously, if it's plugged in I want an option as to whether the screen should go off or not on me. I don't think it's an unreasonable request and it's probably not that hard to implement. I'm not a developer however, so how should I know.
Sorry for not referring to the device correctly (Julian), but I don't really care what it's called. I just want it to work better. I did however refer to it closely enough that you knew what I was talking about.
I can't be the only one that would like it to do what I asked.
Maybe you are looking for
-
Wifi is not working
-
"Delete data and restore" option in Nokia N8
I want to restore my N8 to fresh state as I have installed and uninstalled too many apps and they all have created and left a lot of files on C drive even after uninstalling them. They have ocupied some space on C drive. I am going for "Delete data a
-
Benefits and Payment - overview table and drop down are not populated
Hi All, Overview dropdown and table are not getting populated. I have checked the flow of code in Web Dynpro 1)Vcrem2Comp 2) Component FcRepFramework Tried to check whether these values are coming from ABAP side by using wdcomponentapi message mana
-
After updating a template, DW copies files to c:\
Folks, I have been using CS3 for years with no problem. But I had to reformat my hard disk. After reinstalling Dreamweaver, now when I change a template DW copies all of the pre-change files in the directory I'm working in to c:\. For example, my fil
-
Please help me. Thanks