Is any one has the instrument driver for APD-Vp series servo motor(manufacture is Metronix in korea) for labView7.1?

Please help me.
Thanks

Hong Zhang,
The Instrument Driver Group gathers requests and may or may not come out with particular drivers based on demand.
We have some excellent online tutorials that should help you out:
http://www.ni.com/devzone/idnet/ is a must starting point for tips/information on developing your own driver. The following site specifically talks about LabVIEW instrument drivers:
http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&64325190560C97CE86256E4A006F27F1
If you have any specific questions feel free to post back and we'll see what we can do!
(also have you contacted the instrument manufacturer to see if they have one or would be willing to develop one?)
Craig H.
NI Applications Engineering

Similar Messages

  • Trouble using the instrument driver for the "hp8753b"

    I am using the instrument driver for the "hp8753b", specifically the "collect and display data" driver.  I manually set my settings to the analyzer and run the VI (i.e. set start frequency to 500 kHZ and stop frequency to 1 GHz), when the VI runs with the "collect and display data" it defaults to start frequency 1 GHz and stop frequency to 3 GHz.  I have tried to modify the driver to only collect data and not to modify any settings on the analyzer but I run into errors.  Any help on this is appreciated.

    Hello,
    I have installed the instrument driver you mention in your post. I am looking at the Collect and Display Data.vi, however I need more information from you to determine why your sweep is defaulting back to 1GHz-3GHz. 
    When you say "I manually set my settings to the analyzer" are you making these settings directly on the analyzer? The Collect and Display Data.vi seems to read all of the settings from the hardware, I did not see any configuration in the VI.  What modifications were you making to the VI and what errors were you getting?
    Can you see the range on the instrument?  If so , can you determine at which point the range defaults back to the higher range?  Running in highlight-execution mode in the VI and running NI-Spy (Start->All Programs->National Instruments->NI-Spy) to perform a capture of the GPIB commands can help to determine at what point the errors are occurring.  It will also let you see if there are any commands being sent which cause the instrument to be reset. 
    Jennifer O.

  • I need to use sigma plot in my Mac, does any one has a good advise for alternatives. If not, will it be ok to install windows in my mac?

    I need to use sigma plot in my Mac, does any one has a good advise for alternatives. If not, will it be ok to install windows in my mac?

    See if Deltagraph is still around.  We used to use that for plotting scientific data on Macs.  I don't know if it is at all transferrable with Sigmaplot if you have a colleague who uses it, but if you're doing this on your own I would look at getting DG vs, doing a dual boot  etc.

  • With OS X10.9 the Mail window (after hitting reply or forward) grows ridiculously long, sometimes 4 times the width of the screen and would not allow me to readjust the window size. Any one has the same problem? How shall I go about fixing it? (Thanks)

    With OS X10.9 the Mail window (after hitting reply or forward) grows ridiculously long, sometimes 4 times the width of the screen and would not allow me to readjust the window size. Any one has the same problem? How shall I go about fixing it? (Thanks)

    I'm having the same problem.  I've tried going into the Library and deleting the mail plist file(s), which fixes the problem, but only temporarily.  Would appreciate any help here too!

  • Anyone has an instrument driver for Agilent E8364 50GHz PNA

    Does anyone have a working instrument driver for the E8364 50GHz PNA? I am currently tryin to use the agpna instrument driver downloaded from NI but i am having errors. The PNA balks that the "query is unterminated" and then the VI times out. Please let me know if you have a working instrument driver.

    Is this the driver you are downloading?
    If so,
    - Are you running the Getting Started VI to test communication?
    - Did the ID query pass?
    - Make sure you have VISA 2.6 or later installed.
    - Try running NI-spy with with the Log to File option enabled and post the spy capture.
    NI Spy Tutorial

  • Any one has a coupon code for the photo books

    anyone has a coupon code for the apple photo book? THANKS

    Thanks that helped out a lot; I combined that program with the serial example. It works well, but it seems to want to update very frequently, as I am hearing relays tripping, but if I set the number I want and hit stop it goes there and will stop at that command. Is there a way to just have it send the data and then just have it leave the serial device alone unless you change the angle. As in only send the data once, but not have to re hit run.
    Attachments:
    GS-232 Controler.vi ‏37 KB

  • Does any one has the Nuance version 9.0.3, 4-ports evaluation license file for share?

    try to setup IPCCX8.0 with ASR feature. but do not have Nuance 9 license, I have send the request to Nuance sales. but no reply.

    Hi Kevin,
    I have the same issue while preparing the CVPI 8.0 training.
    The products are no longer available in Nuance Website and no one from the sales answered me !
    Any idea ?
    Thanks !

  • New Macbook Air i5 wireless is very slow and disconnect again and again. Any one has the same issue or some help??

    I recently bought a new 13 inch Macbook air and wireless internet is really slow and disconnect again and again. However I hav another windows laptop at the same place and that never disconects or looses signals? wireless on this mac is too slow that I cannot even use to make a skype call. I am new mac user and getting a bit disappointed because of this bad performance.I googled about this issue and found that lot of people are having the same issue with macbook air. I switched off the bluetooth adaptor but still no progress. Any help will be appreciated. Thanks

    I am experiencing something similar with my MBA 13"/i5/256GB.
    To take it one step further, I started up a Terminal session and ran a ping against my wireless router. I see the same pattern repeated over and over: I get about 5 or 6 pings through, then 4 or 5 misses, then it reconnects again. When it reconnects, the first ping or two have times in thousands of milliseconds, where normal is maybe sub-millisecond to 4ms for the remaining few seconds.
    I have other wireless devices, including iPhone, iPad, and an older MacBook - all work fine. The MBA is the only Lion device.

  • Any one has a iphone 3gs for sale , I lost my wife's phone in a Honda car dealership, in Naperville Ill

    Unfortunetly I lost my Iphone 3gs , when I dropped my car for repair. Trying my best to find the phone. the find my phone app's last location was
    Valley Honda Naperville/Aurora, 4173 Ogden Ave.|Aurora, IL 60504|Map / Directions. No one claims they found one.
    Thanks
    Daniel

    final fantasy still on the app store... need for speed dosn't

  • Does Any One Know The Default Font For The OS X 10.4 ?

    I changed it now i can't find my back hehe
    and does anyone know how to reset the OSX ? will it affect my plug-ins authorisations ?
    thanks guys

    The default fonts depends on (1) the language used, (2) the application and (3) what information is displayed. You can control this — to a certain extent — by tweaking the applications' bowels, but there might also be some helpers out there... The fonts used by the operating system itself are listed below:
    ヒラギノ角ゴ Pro W6.otf, ヒラギノ角ゴ Std W8.otf, LastResort.dfont, ヒラギノ角ゴ Std W8.otf, AquaKanaBold.otf, Geeza Pro Bold.ttf, Times LT MM, 华文黑体.ttf, 华文细黑.ttf, Helvetica.dfont, Geeza Pro.ttf, Apple LiGothic Medium.dfont, ヒラギノ明朝 Pro W3.otf, OsakaMono.dfont, Times.dfont, Symbol.dfont, ヒラギノ角ゴ Pro W3.otf, Monaco.dfont, AppleGothic.dfont, ZapfDingbats.dfont, Keyboard.dfont, Osaka.dfont, Hei.dfont, Geneva.dfont, Courier.dfont, LucidaGrande.dfont, AquaKanaRegular.otf, ヒラギノ丸ゴ Pro W4.otf, Helvetica LT MM, ヒラギノ明朝 Pro W6.otf, 儷黑 Pro.ttf...

  • Any one has the right implementatin idea on SortingTable

    I have implemented a sorting table in table definition and disbaled the links, but when I click on the columns it going to the WorkItemEdit page. Is there a right implementation example?

    I found the 22282EU in bestbuy, plus Amazon listed 22282EU as "Item model number" under 22282MU.
    so I believe that the 22282EU is the retail version of 22282MU.

  • Looking for instrument driver for HP3561A (Using LabView6.1)

    Hello,
    Is there anyone out there has the instrument driver for HP3561A. I know there is one available in the ni.com/idnet however, that one runs only on a higher version. Can someone tell me is there any other options?
    Regards,
    Daniel

    Look again. There are 6.0 and 7.0 versions available for download.

  • Instrument driver for Anritsu-MS2683A

    Hello,
    I am new to LabView. Does anyone has the Instrument driver for Anritsu-MS2783A( spectrum analyzer).
    I am having a hard time to get it.
    Thanks,

    Ok. Seemingly, instrument driver for that model is not updated. As u can see only available driver is for MS2602A, which has been released in 1995. If there is no big difference between 2 models, i assume that u can use the driver of MS2602A. At least, it should be same for main features, but it is labwindows/CVi type. U might ask the venter which one of the NI certified drivers is suitable for ur instrument.

  • Instrument Driver for Advantest R6243/6244

    Has anyone developed the instrument driver for Advantest R6243/6244 and willing to share the driver? Thanks!

    Hi Rebecca,
    There are several drivers for other Advantest products in NI's Instrument Driver Network, however I didn't find any driver that specifically matched the R6243/6244 voltage/current generator, and I didn't find anything on Advantest's site that could point me to a quick solution for you. Unless another user has developed a driver that they could give you the code for, it looks like your best bet from this point is going to be to request a driver, if you haven't already. You can do this by going to the Instrument Driver Network, and following the link to "Request Drivers". Hopefully this helps you on your way. Good luck!
    Logan S.

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

Maybe you are looking for

  • Is there a auto-increment data type in Oracle

    Is there a auto-increment data type in Oracle ? How to do it if there is no auto-increment data type in Oracle ? null

  • Whitelist adding

    Hi, Another question on my os x.4.8 server i want add some whitelist adress and domains ( like *@fnac.fr ....) But exectly in what file can i add them ? Thanks

  • Premiere Pro CC 2014 Video is too LARGE

    Hi all, Just getting started with Premiere Pro CC 2014. I've imported a short clip to practice on, and the first thing I noticed is that the output video is too large for the screen: Is there a way to fix this? I don't know if this is related or not,

  • Need to protect my activation in case computer is pulled

    I'm on a job using my own copy of After Effects (CS3) but it's not my computer.  There's a chance that the vendor supplying the computer may be changed suddenly, and the old computer pulled overnight.  I want to avoid having my activated copy of AE d

  • IPhone charge issue with Mountain Lion

    Since upgrading to Mountain Lion, my iPhone no longer charges when my iMac goes to sleep. I've check the settings already but didn't see anything. What am I missing here?