About connection using sysdba

Hi all :-)
I have a little question.
I can make the connection through
the command:
conn / as sysdba
For security, I would like that the user obligatorily put the password for sysdba to enter in the databse.
For example:
conn sys/pwd as sysdba
How can I do this?
Thank you!

Because you're assigned to ORA_DBA group and that's why from your computer (as a computer of Oracle Administrator) you can enter to database whith no password. But from other computers you are entering to database as sysdba whith passwor. To change this password
use orawpd utilite
C:\> orapwd file=filename password=password
filename is a password file, password is the password which you want to give it to sys user.

Similar Messages

If I can connect using remote desktop, does it mean I can connect using ftp?

Hello everyone, I have a question about connection using ftp.
Normally when I want to connect through ftp, everything is provided such as the ftp name and username and password by my hosting service. But now I don't have all these details about a local server in my company office because the server is actually not hosting
any sites. It's just a server where documents are stored.
But I need a way to connect to this server through my web application.
All I know are:
It is possible to connect through remote desktop to that server
There is an ip address for that server ( The server machine is in my company office)
I have a username and password that allows me to access network drive on that server (I can do this only by directly plugging the cat5 cable to my laptop)
When I configure my outlook email using microsoft exchange server, this is how my settings look like (example.net.au is just for example sake):
Server: server1.example.net.au
User name: [email protected]
Does the ftp detail exist for this server? How do I find out?

Thanks for the reply, Dave. The problem is the admin is not working here anymore. I wonder if there is a way i could figure that out. Out of curiosity how do ftp details created? If I want to set up FTP details from scratch, what do I need?
Thanks
you need to ask anyone from your company who is familiar in your IT infrastructure.
starting FTP from scratch, is okay but security is one thing.
you might end up an FTP server that is free or open to the internet, make sure you exactly know what you are doing.
even though there's a lot of guide on the internet, make sure also you understand what you are following in the guide.
Please check with someone who is quite familiar on this kind of things.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

TS1550 What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine

What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.

See if this helps...
http://pondini.org/TM/C12.html

Sysdba connectivity using OCI

Hi guys,
I have a problem With Oracle sysdba connectivity using OCI.
Can you any one please forward the Source code to connect SYSDBA using OCI.
My server is Oracle 10g
I am using VC++ as interface.
Please respond,
Regards,
kishore

You should confirm that you can connect to the DB with a simple Java class using the url that the code you posted is using.
This will show that the OCI client is installed and executing properly. If you can't connect externally you will need to fix that first.
Is the Oracle client installed on the same machine the JDBC code is running on?

Connect as sysdba between Linux and Windows without using password

hello
Hello
I need to connect as sysdba between Linux and Windows without using password for the sys user
Sqlplus /@string_connection
Plz help me

Duplicate post:
Connect as sysdba between Windows and Linux
Actually you have been given the answer in your above thread. You need to read the Oracle documentation. Search password file at tahiti.oracle.com
regards

Connecting as sysdba returns ORA-01017: invalid username/password

SQL Developer on my Win7 x64 Enterprise machine with Oracle 11gR2 Express was working fine until I tried to install the ODAC connectors so I could use Oracle as a data source for C# and VB in Visual Studio 2010.
The connection properties are:
Connection name "/ as sysdba"
Role "default"
Connection Type "basic"
OS Authentication checked
Hostname "localhost"
Port 1521
SID "orcl"
These are the same as when SQL Developer was working.
If I try to log on to SQL*Plus at the user-name prompt with "/ as sysdba", I get "insufficient privileges".
Where and what do I check to fix this?
Thanks.

>
Where would I check for DOMAIN/USER entries?
select username, authentication_type from dba_users;With the prefix, there should be a database user e.g. "OPS$MYDOM\MYUSER" with external identification.
But with Connection type Basic, I assume you would not be able to connect anyway.
Try type TNS to see if that works or changes anything. (That is, if corresponding db user exists for OS authentication.)
Do you have a requirement to use OS authentication? Could you instead use a database user with a password, i.e. uncheck OS Authentication in SQL Developer?
The connections in SQL Developer are the Auto-Generated Local Connections:
/ as sysdbaI've found a few quirks in SQL Developer 3.0.04 with the auto-generated connection named "/ as sysdba". But right now I don't see that its relevant to this case.
Just create your own connection instead. If you need sysdba administrative connection, change Role in connection properties.
>
By the way, the password for SYSMAN will expire in 5 days. How do I update the password?You should separate questions in separate threads and related forums, but lookup the ALTER USER command in the SQL Reference book.
Edited by: orafad on Dec 4, 2011 11:47 PM
Edit:
parenthesis about os auth part
Edited by: orafad on Dec 6, 2011 1:29 AM

How to change password of sys user connected as sysdba?

How to change password of sys user connected as sysdba?
I have connected with user name sys as sysdba in oracle 9i with password oracle.
I want to change the password . I typed password and pressed entered. It asks me to type old password, then new password and retype the new password. When I press enter it gives error message "ERROR:
ORA-28008: invalid old password"
Password unchanged.
does anyone know about this...? how to change the password..?

You may be using operating system authentication to log in as sys with sysdba privileges.
By using password utility, you can change the password of sys user (which is in database) which is "change_on_install" when you create a database.
You can change this password.

Anyone else having an issue with TCP connections using iCloud for Windows?

Hi,
Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that. They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b, at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
Anyone out there have any ideas or advice about this? Thanks in advance.

Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

Hello there, Minig1501.
The following Knowledge Base article has some information on the message you're receiving:
Unable to use Apple Push Notification service (APNs)
http://support.apple.com/kb/TS4264
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Google apps doesn't connect using exchange option in mail while on 3G

Hello,
I have been using google apps for over two years and it has been working perfectly on my iPhone. I set up my email using the exchange option and its been running without incident. I also have my gmail setup using exchange and it too has been working fine for years. About 2 months ago I had my iPhone 5 replaced by apple under warranty and on the new device I was no longer able to setup my gmail using exchange. I then read that google stopped supporting exchange for new iOS devices. However, my google apps account continued to work perfectly until a few days ago. It suddenly stopped connecting to my account. I did a few experiments and noticed that it works perfectly when connected via wifi or on Edge but not on 3G. It's strange that it just doesn't connect on 3G. To troubleshoot I deleted the account and added it again but that didn't solve the problem. I also restored the phone but that didn't help either. Finally I changed my SIM card and that didn't help too.
Does anyone have any idea why this is and how I can solve this issue?
Regards,
Saeed

buyousuf wrote:
Thanks for the reply. This explains why my gmail account doesn't work using exchange. However, google apps is a paid service and hence should work using exchange.
What did google say when you contacted them? It's their service.
Also, I am able to connect using Edge and wifi but not while on 3G.
Connect to what? Are you saying Google Apps works on Edge, but not 3G? Or are you saying you can't connect to the Internet at all over 3G?

2 questions about connection to hyper-v in windows 8

hi,
I can connect to my virtual machine from hyper-v manager ,but when I try the other option
--- connect with hyper-v virtual machine(option) I see on the log on wizard telling me that I don't have the right to run this job. take contact with the autorazition policy administrator.
1---my question is here , is connect with hyper-v virtual machine option is specially purposed to connect with virtual server or it has some onother function! because I opened the autorazation
policy on my windows 8 to see if I can edit some policies but I didn't see any function to creat one only it is asking for archieve.
2--connction trough remote desktop to VM is only purposed from ouside or you can use it to connect to VM internally too? very short answers wil be enough.
thanks
johan
h.david

thanks
,but wat about connect to hyper-v virtual machine option in start menu(which is one of hyper-v manage programa's option and the second is shyper-v manager), why I can not connect through this option
it gives me Always an error with that I don't have the right to run this conect option through its log on window and I have to contact my system administrator of autorization policy?
is this option (connect) outside the hyper-v manager is purposed for the server or I have to change some policies on my computer to can log on to virtual machine from ouside the hyper-v manager with this second option
johan
h.david

How to view the No. of connections used in DB as Normal user?

Hi,
I have an clarification about to view the number of connections in DB as normal user.
As sys user, we can see the Max. no. of connections / number of connections used in Database. In the sameway, Do we have any option to
view those details as normal user [I.e. As normal user without DBA Rights ]. Please let me know if its possible.
Kindly clarify me on this.
Thanks,
Orahar.

With due respect i wish to say, suppose my car (session) is running on road (db). If i ask how many cars (sessions) are there at presently on road (db); don't you think i am asking bit unproductive question? Suppose any how i got a number say 100 ; so now what this 100 can help me; what i am going to solve by this 100.
if you knows all why’s answer, then there are answers for all hows for sure!
Regards
Girish Sharma

Error connecting as sysdba

hi all,
i m using oracle 11g ie 11.1.0.6.0... my OS version is solaris10. The OS got corrupted and was again re-installed...Oracle was installed in different mount point,so there was no problem from oracle side as creating the oracle user and the relevent groups were done.
But when connecting as sysdba ie
sqlplus "/as sysdba" gives
ERROR:
ORA-01031: insufficient privileges
but is able to connect as
sqlplus /nolog
SQL>conn sys/****** as sysdba
connected
this problem is occuring after OS-re-installation

Hi,
Please check if OSDBA operating system group was assigned to O/S user.
http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/dba006.htm#sthref89

Connecting as SYSDBA from Remote Machine

Hello,
I've installed Oracle8.6.1 on Linux6.2,& i've installed DBA studio on one my windows'NT machine.
When i want to connect as SYSDBA from DBA Studio & Username/Password as system/manager it says --
ORA-01031 Insufficient Privileges
but i'can connect as SYSOPER & Normal.
Do anyone know how to solve this problem???
null

1. use orapwd command-line utility to create a new password file.
2. set remote_login_passwordfile = exclusive in initxxx.ora file.
3. restart instance.
4. use sql*plus or svrmgrl to grant sysdba right to the schemas you want to be able to logon with sysdba rights.

Problem connecting as sysdba ....

Hi,
I'm going to manually create manually a database on Windows 2005 server. I have already installed successfully the DB software.
Having set the ORACLE_HOME , ORACLE_SID and created the oradim i 'm trying to connect as sysdba...but the error ORA-01031 is appeared....
SQL> conn /as sysdba
I defined the Administrator user to the ORA_DBA group and tried the above but the same problem insists.....
What may be the reason ...??? Do i have to restart the server after setting the Administrator user to the ORA_DBA group....???
Note: I use Ora Db10g. v.2
Thanks a lot
Sim

Hi,
this line already exists in the file sqlnet.ora... Anyway , i noticed that when i issue the command:
c:>oradim -new -sid orcl -startmode auto -pfile d:\.......\.....initorcl.ora
Instance created.
DIM-00019: create service error.
O/S - Error: (OS 1376) the specified local group does not exit
In fact , the service is created in manual mode. When i press the button start ,in the services window, this service is started .. without any error message.
But when i try SQL>conn /as sysdba ... the error insists (ORA-01031).
Note: I ' m connected as Administrator. I have assigned the Administrator to the ORA_DBA group . I have not restart the system after the assign...
Thanks,
Sim

About connection using sysdba

Similar Messages

Maybe you are looking for