About error.

Hi..plz help.
I m new to OWB.
when i create mapping between 2 tables on date function, it generate and deploy correctly. but when i start it shows 'ORA-01843: not a valid month'
I use the expression to_char(to_date( date ),'dd-yyy-mm').
plz solve it.

to_char(to_date( date ),'dd-mm-yyyy')

Similar Messages

  • I see people asking about Error Code - 36, but no helpful answers.

    Just started yesterday while trying to copy files from hard drive to thumb drive. Repeated Error Code - 36. Happened a lot but no to every file I tried to copy. Started again today when I tried to copy from my Drop Box to a thumb drive. Macbook Pro is a year and a half old - don't tell me it's toast!

    If it's the same thumb drive it could be the thumb drive is toast.
    What format is/are these drive(s)?  If FAT then it could be a problem with your filenames.
    General information about error -36 - https://discussions.apple.com/message/18221459 - bad disk or format; try using Terminal to copy file.
    Error -36 reported when copying files to external drive - http://discussions.apple.com/message.jspa?messageID=8467699
    Error -36 and filename characteristics - http://discussions.apple.com/thread.jspa?messageID=9629287 - FAT drives may not like all Mac filenames
    AD topic on Error -36 trouble shooting - http://discussions.apple.com/thread.jspa?messageID=8586572

  • What do I do about Error Code 0x80070057 when I attempt to upload a mpg 4 file into MobileMe?

    What do I do about Error Code 0x80070057 when I attempt to upload a mpg 4 file into MobileMe?

    MobileMe is in the process of being shutdown. Perhaps the error is related to MobileMe going away.

  • TS3297 What can I do about error 42408?

    What can I do about error 42408? I can't download my purchased and matched music from the store.

    Ruleo,
    It is common to have a reading on a disconnected channel. Generally speaking for measurement devices, un-connected voltage inputs tend to float around to either the positive or negative supply rail of the measuring device and current inputs will float around the 0 mA range. This is due both to device design and the real world behavior of components as opposed to the ideal behavior model. Some devices such as the FP-TC-120, will have circuitry to cause un-connected outputs to go to a specific level (in the case of the FP-TC-120, unconnected outputs will always read full scale of the range).
    When you say you are getting a reading on that channel, is it a reading that is close to mininum scale, or is it a reading in the middle of the
    scale, i.e. 10.2 mA? If the channel is not reading close to minimum scale, it is possible that the channel has been damaged. On the FP-AI-111, you can use a DMM to measure between the Iin pin and any of the C or Com pins. First disconnect any external wiring to the channel, then hook in the DMM. The resistance (within the accuracy of the DMM) should be exactly 100 Ohms. If the resistance is greater than 100 Ohms, then the channel was damaged by an over-current condition that exceeded the published specifications of the module (30 mA). In that case, the module will have to be sent to National Instruments for repair.
    Regards,
    Aaron

  • TS1424 What about error -1202?

    What about error -1202?
    I've had problems with Win 7 64bit installations spanning iTunes 10 to now iTunes 11.
    Connecting to the store generates -1202 unexpected errors.
    I can't seem to find clear definition to what error code -1202 is...

    I run across the same problem upgrading to ios 5. I finnally took my phone to future shop (totally away from my server, wifi, laptop and its firewalls etc) and the upgrade is now installed. Last night I tried uploading ios 5 on my wifes phone (purchased at exactly the same place and time as mine and it worked perfect the first time, go figure. The only difference was i was running windows vista on my laptop and my wife has windows 7 on her laptop who knows if this has some effect on the upgrade.

  • What to do about error msg: Warning: SUID file "System/Library/Core/Services/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent"has been modified and will not be repaired" on MacBook Air.

    What to do about error msg in Disk Utility on MacBook Air:
    Warning: SUID file “System/Library/Core/Services/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent"has been modified and will not be repaired.”

    As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
    Permissions you can ignore on 10.5 onwards:
    http://support.apple.com/kb/TS1448
    Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
    Poster rccharles has provided this description of what it all means:
    drwxrwxrwx
    d = directory
    r = read
    w = write
    x = executeable program
    drwxrwxrwx
    |  |  |
    |  |   all other users not in first two types
    |  | 
    |  group
    | 
    owner

  • Please brief Describes about error handling with example

    dear
    please describe about error handling and exception handling

    Darryl Burke wrote:
    This is the third thread you have started here, without bothering to reply to responses on the two earlier threads. Not the best way to continue to get help on a forum, that.Not to mention the fact that it's a horribly broad and vague question that is better answered by a combination of books, tutorials, and google searches.

  • When I trying to sync the Iphone Itunes show me message about error 0x009bd33

    When I trying to sync my Iphone, Itunes shome message about error 0x009bd33
    Help Please

    downgrading the iOS is not supported and therefore cannot be discussed in this forum.  You'll need to go elsewhere for support.

  • HT201210 dose someone has any idea about error 1015 when trying to restore iphone iOS?

    Dose someone has any idea about error 1015 when trying to restore iphone iOS?

    Error 1015 means the phone was jailbroken. You can not get help here.

  • Questions about errors

    These are my latest HH3a stats after a DLM resynch - part of an ongoing battle with it over the SNR
    Connection Information
    Line state:
    Connected
    Connection time:
    2 days, 03:05:42
    Downstream:
    6.711 Mbps
    Upstream:
    888.9 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    5.1 dB / 8.3 dB
    Line attenuation (Down/Up):
    44.1 dB / 26.0 dB
    Output power (Down/Up):
    20.0 dBm / 12.6 dBm
    FEC Events (Down/Up):
    324989772 / 315
    CRC Events (Down/Up):
    761667 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    7393116 / 2
    Error Seconds (Local/Remote):
    31313 / 1
    IP is 6.06 and speed 5.92.
    The errors an hour after the resynch were  CRC 702269  HEC 6925930  Secs 28828
    What I want to know/understand is why the errors were so high after the resynch and why am I currently still able to get the speed I can as in the past errors less than half the total shown have completely throttled the line.
    FYI this is a follow on from this thread  http://community.bt.com/t5/BB-Speed-Connection-Issues/Low-Noise-high-errors-again/td-p/734960
    Solved!
    Go to Solution.

    It's not an easy question to answer ... but this may give you an insight.
    Sync is acheived by the msan sending a series of tones down the line to the modem, and according to the acknowledgements, the modulation standard is set. The loop loss is measured electronically and according to same, the amount of SNR (not SNRm) is used to set power factors so that the dslam can transmit the databits over the frequencies for the tones that were accepted. Some tones and thus frequencies will have been lost, as the line can't sustain them, because of either outside influences or mere line length. Once the SNR and power is set, the dslam will apply a buffer which is normally target margin (6db) (can be 3db on DSL2 running a special algo at the msan control).
    Once all these parameters are set the line will attempt to transmit data putting analog information into digital virtual buckets to transmit down the wire.
    If any of the databits are destroyed in total, or the majority of the packet is useless, a cyclic checksum will command a resend of that packet. If the packets are fairly good, and transmittable, they will go but will be checked and error corrected by a soft block code algorithm using RS codewords to fix the packet, these don;t get resent merely fixed.
    If the line is having a bad day, the errors may rack up and quickly, so the modem has the capability to drop the connection if it sees multiple second counts whereby the entire payload was corrupted, but it won't do it until a threshold (count) is breached.
    Lines change all the time, and at different times of day, as for example impulse noise increases at night owing to external influences, street lamp radiation, radio frequencies etc. and this is normally absorbed by the margin of the SNR, or put another way the noise margin. If databit transmission becomes difficult the MSAN control can increase the margin to enable the linedata to be "heard"... at the cost of linespeed.
    To get back to your original point about error rates .... if your line sees high CRC checks (and resends) high HECS , header corrections ... it will absorb high levels of bandwidth and reduced throughput will ensue.
    With FEC high figures simply shows interleave and block error correction is working, and it is demonstrating the rate of bits that are acknowledged as repaired. All lines will see some, and some more than others. The better the line and quality of the path, the less errors will be seen.
    The DSL also has a further trick up its sleeve. If certain frequencies can't be used when negotiation takes place, it has the ability to swap databits from one virtual bucket to another bit-free part of the spectrum, that isn't being utilised for transmission, and in doing so maintains the throughput without wasting any bandwidth. That's bitswapping and is used frequently on longer, or errornous lines where "normal" databit transmission is difficult.
    To put all this into perspective .... if your line starts to crackle .... high counts of errored seconds will be seen, and cyclic checking will go up, along with packet header correction. And as all this takes up overhead, throughput and data transfer depletes until the modem drops the connection.
    On regaining a new re-negotiated connection, the dslam may according to line history and the "fault" that caused linedrop .... impose a higher level of interleave, via the DLM line algorithm. It can also reduce sync like it does at night, in order to negotiate a connection that is sustainable.
    Crackle is probably the worst case scenario, as eventually the connection is bound to drop. But even high levels of impulse noise can destroy data packets, so if you have say poor extension wiring that absorbs REIN it will do the same, cut back the throughput.
    Hope this helps.

  • Who Can help me? About "Error 500--Internal Server Error"

    Dear,brothers,
              I can run AdminMain in "http://192.9.100.3:7001/AdminMain". But when I run
              pooltest in
              "http://192.9.100.3:7001/pooltest". It cannot work.It displays:
              Error 500--Internal Server Error
              From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
              10.5.1 500 Internal Server Error
              The server encountered an unexpected condition which prevented it from
              fulfilling the request.
              When I see the weblogic.log,there are some information about it:
              Wed Jun 28 20:03:51 MDT 2000:<E> <IIOPSocket> failed to configure user for
              iiop protocol
              Wed Jun 28 20:03:56 MDT 2000:<E> <ServletContext-General> Error casting
              servlet: examples.jdbc.oracle.simpleselect
              java.lang.ClassCastException:
              at
              weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java
              :382)
              at weblogic.servlet.internal.ServletStubImpl.createInstances(Compiled Code)
              at
              weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.jav
              a:338)
              at
              weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:16
              4)
              at
              weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
              :99)
              at
              weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
              l.java:742)
              at
              weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
              l.java:686)
              at
              weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
              Manager.java:247)
              at
              weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:361)
              at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
              at weblogic.kernel.ExecuteThread.run(Compiled Code)
              Wed Jun 28 20:03:56 MDT 2000:<E> <ServletContext-General> Servlet failed
              with Exception
              javax.servlet.ServletException: Servlet class:
              examples.jdbc.oracle.simpleselect does not implement javax.servlet.Servlet
              at
              weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java
              :385)
              at weblogic.servlet.internal.ServletStubImpl.createInstances(Compiled Code)
              at
              weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.jav
              a:338)
              at
              weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:16
              4)
              at
              weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
              :99)
              at
              weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
              l.java:742)
              at
              weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
              l.java:686)
              at
              weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
              Manager.java:247)
              at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled Code)
              at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
              at weblogic.kernel.ExecuteThread.run(Compiled Code)
              

    Get the TNSNAMES.ORA file of your database and copy it in Discoverer Home (i.e., home where you installed Discoverer Administrator, usually BIToolsHome_1/network/admin). Then login to Discoverer Administrator using a new database user (usually EUL_US) which you might have created as part of installation. Once logged in, it will prompt you to create an EUL. Please follow Discoverer Installation Document.

  • Help me about error: ORA-06502

    Hi everyone,
    I have a problem about CLOB datatype: when I insert data into a CLOB column (the data is a sql script, length of the data over 11,000), PL/SQL show an error: "ORA-06502: PL/SQL: numeric or value error: character string buffer too small".
    I know that CLOB datatype store up to 4 Gigabytes of character data in the database, so I don't know why show "ORA-06502" error. Can anybody help me resolve this problem. Thanks so much.

    My application allow user input oracle query to execute a task.
    This is my table structure:
    create table PRO_COMMAND
    ID NUMBER not null,
    NAME VARCHAR2(200) not null,
    COMMAND CLOB not null,
    COMMAND_ORDER NUMBER(3) not null,
    REPEAT NUMBER(1) not null,
    IGNORE_ERROR NUMBER(1),
    NOTE VARCHAR2(200),
    ISACTIVE NUMBER(1) not null,
    CONDITIONID NUMBER(2) default 0 not null,
    MONTHCOND VARCHAR2(6),
    CONDITIONID2 NUMBER(2) default 0,
    MONTHCOND2 VARCHAR2(6)
    tablespace USERS
    pctfree 10
    initrans 1
    maxtrans 255
    storage
    initial 64K
    minextents 1
    maxextents unlimited
    When user add a new command in application, program will insert into PRO_COMMAND table with COMMAND field is query data. Allow me do not show my query, but when I input a query large than 10000 (datalength), it's show above error; other wise: insert OK.

  • Notification about errors during transport from DEV to QAS server.

    Hi Guys.
    Is there any way of alerting the user about the errors that arise when moving the transaction from DEV client to QAS client?
    For Instance,In DEV the program may be working fine and while transporting sometimes errors can arise by not including all the necessary files while moving to QAS server.
    Kind of auto-email facility notifying the user...

    Hi,
    there might be some standard functionality for TMS but if you can't find anything then you can still use BADI CTS_IMPORT_FEEDBACK. The only method if this BADI is called right after import of each transport.
    Cheers

  • Answer to question about "Error Occurring when convertion is tried for PDF to Word Document"

    There are about ten questions about the "Error Occurring" when  using Abode Reader XLto convert a PDF to a Word Doc, but no one has the answer? It has something to do with "signing in  the wrong address". I have been working on this three days Now! Soimeone has the answer? Cataloochee

    You must be kidding to say, "Adobe doesn't convert any version of Adobe Reader."'  I must be in another world! When i move an Adobe Reader file pdf that goes to a wIndow that the top line says,'' Adobe reader X1 1001 Early Dutch History. pdf ". Then i click on the far left yellow marked icon that is used to move 1001 Early Dutch History.pdf to thye far right into a gray colored slot that reads "1001 Early Dutch History.pdf'. Under the file above  or down below, the selected File for conversionis, a selection gray slot that ask if you want to convert this file(pdf) to a .docx.,.doc, tex. or Excell. After I make the selection and click onto Convert, a message comes into view where the word convert was that reads "An Error Occurred wilth Signing In  OK" Even the use of another pdf file with a complete different address produces the same message. There are eight chapters in Dutch that I need to convert to word document by tommorrow or the class i teach "the Origin of Golf" will have to listen in Dutch and I can't speak Dutch. Cataloochee

  • Question about error code

    I have been having problems when I try to open applications such as IPhotos or Photoshop. They keep on quitting. I did the Hardware Test and it showed error code 2MEM/5/4:DIMM1/J31. Does anyone know what it means and what I should do? I do not have a warranty anymore and now I wondered if I am gonna have to get the coverage plan (my budget is tight right now). Thank you for any help you can give me.

    Either the module has failed or has come loose. At this time I'd open up your computer and make sure it's still locked in place. Afterwards, no need to run the hardware test, just check with System Profiler to see if you were able to nudge it back into position.
    Once in a while RAM modules do fail, but not very often.
    Edit-
    Since you apparently did not purchase this from Apple, it probably is still under lifetime warranty by the seller, so look up your original order number on the invoice and fill out an RMA request on the website of your supplier, or of the manufacturer (brand) itself. If they don't have a Support section or warranty or RMA section, you'll have to email them.
    Put off thinking about eBay until you find out if it will be replaced under warranty.
    [If you had an extra 1GB of memory, that is not going to be a bargain on eBay, as many are just now upgrading and trying to buy that size, but if you had an extra 512MB, then that is what can be found for a fraction of the price you'd have to pay for new anywhere else. If you're really lucky you can find someone with a relatively new iBook or PowerBook who might be looking to sell what hardly had any use. Caution in shipping is required, as the biggest cause of RAM failure is mishandling of the module between manufacture and packaging.]

  • Looking for infos about error code in Sun Java Directory Server 6.3.1.1.1

    Hi,
    I'm using Sun-Java(tm)-System-Directory/6.3.1.1.1 on Solaris 9 with two server configured in multi-master replication
    For a few time I receive those warning in the error logfile :
    [14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
    [14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
    [14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
    [14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
    [14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
    [14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
    and I would like to know what's going up and what I should do, so in case somebody have some infos about it, I would be very interrested.
    I'm trying to find a way of veryfing fragmentation of the backend, but not sure about this.
    TIA

    Looks like the attribute sunIdentityServerDiscoEntries is defined twice in the schema. Run the following and see where it is defined for the second time.
    # cd /var/opt/SUNWdsee/dsins1/config/schema
    # grep -w sunIdentityServerDiscoEntries *.ldif | grep -iv objectclasses
    Edited by: etst123 on Mar 3, 2009 1:28 PM

Maybe you are looking for