About ndi, bw entries in mm

hi all,
i have entered new entries ndi, bw . i am getting problem how to get activate the flag of enterend new entries ndi, bw. this is related to inventory management.

Hi,
Please refer below thread
[http://wiki.sdn.sap.com/wiki/display/SI/TroubleshootinginInventoryManagement]
Thanks,

Similar Messages

TS1717 since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?

since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
these are the boxes that open up:
I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.

anyone able to help me with the above?

About for all entries in itab usage issue

hi
i will get a lot of material information first.
the next i will get inforamtion about table MARC AND MBEW.
one statement i use sap function to get MARC:
CALL FUNCTION 'MARC_ARRAY_READ'
    EXPORTING
      KZRFB                = ' '
      NEUFLAG              = ' '
      SPERRMODUS           = ' '
      STD_SPERRMODUS       = ' '
      EXCEPTION_ON_LOCK    = ' '
    IMPORTING
      RETC                 = ret
    TABLES
      IPRE01               = ipre
      MARC_TAB             = disp
    EXCEPTIONS
      ENQUEUE_MODE_CHANGED = 1
      LOCK_ON_MARC         = 2
      LOCK_SYSTEM_ERROR    = 3
      OTHERS               = 4.
two statement if i use:
    select matnr dispo ekgrp plifz
into table disp
from marc
for all entries in ipre
where werks = ipre-werks and
        matnr = ipre-matnr.
which one will get better performce.
and
if ipre table have a lot of data, so in sap what about for all entries of Limit?
and will lose data to use for all entries of statements?
have function in sap to get data like 'MARC_ARRAY_READ' about MEBW.
THANK YOU!

thank you!
what about for all entries of Limit?
and will lose data to use for all entries of statements?
exist function about get MEBW ARRAY??

JavaFX 2.3 Mac OS X "Preferences" and "About" screen menu entries

Hi there,
I'm currently using the 1.7.0_10 JDK and JavaFX 2.3 under Mac OS X 10.7.5 and was wondering if it is possible to move the menu entries "Preferences" and "About Application..." to the standard Mac screen menu locations, means under the application menu? If anybody could provide a code snippet or a hint how to achieve this, that would be great.
Thanks Steffen.

Repair permissions with Disk Utility.

Question about nouveau wiki entry (keep both drivers installed?)

In this section:
https://wiki.archlinux.org/index.php/No … _installed
It talks about ways to keep both drivers installed. As far as I can tell both drivers cannot be installed at the same time because of the conflicting packages "mesa-libgl" and "nvidia-libgl". Is there in fact a way to have both of these packages installed? Seems like in that entry section there is a lot of useful information. Not sure which sections to keep and which to rename / move etc.. Wanted to put up a discussion about this first to see what needs to be done if anything.
Last edited by dodo3773 (2013-12-10 20:28:39)

I agree on "keep both drivers installed" issue.
I've done some modifications to the nouveau -> nvidia and the other way round scripts, too (so they'll install/ uninstall the way they should). Might add that tomorrow.

About for all entries

can u give the information abt the FOR ALL ENTRIES and the conditions.

HI
GOOD
Use of FOR ALL Entries
Outer join can be created using this addition to the where clause in a select statement. It speeds up the performance tremendously, but the cons of using this variation are listed below
Duplicates are automatically removed from the resulting data set. Hence care should be taken that the unique key of the detail line items should be given in the select statement.
If the table on which the For All Entries IN clause is based is empty, all rows are selected into the destination table. Hence it is advisable to check before-hand that the first table is not empty.
If the table on which the For All Entries IN clause is based is very large, the performance will go down instead of improving. Hence attempt should be made to keep the table size to a moderate level.
Not Recommended
            Loop at int_cntry.
             Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
            Endloop.
Recommended
            Select * from zfligh appending table int_fligh
            For all entries in int_cntry
            Where cntry = int_cntry-cntry.
GO THROUGH THESE LINKS
http://www.thespot4sap.com/articles/SAPABAPPerformanceTuning_ForAllEntries.asp
CODE
Code to demonstrate Select FOR ALL ENTRIES command
The FOR ALL ENTRIES comand only retrieves data which matches
entries within a particular internal table.
TYPES: begin of t_bkpf,
include structure bkpf.
bukrs like bkpf-bukrs,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
BLDAT like bkpf-BLDAT,
monat like bkpf-monat,
budat like bkpf-budat,
xblnr like bkpf-xblnr,
awtyp like bkpf-awtyp,
awkey like bkpf-awkey,
end of t_bkpf.
data: it_bkpf type standard table of t_bkpf initial size 0,
      wa_bkpf type t_bkpf.
TYPES: begin of t_bseg,
*include structure bseg.
bukrs     like bseg-bukrs,
belnr     like bseg-belnr,
gjahr     like bseg-gjahr,
buzei     like bseg-buzei,
mwskz     LIKE bseg-mwskz,         "Tax code
umsks     LIKE bseg-umsks,         "Special G/L transaction type
prctr     LIKE bseg-prctr,         "Profit Centre
hkont     LIKE bseg-hkont,         "G/L account
xauto     like bseg-xauto,
koart     like bseg-koart,
dmbtr     like bseg-dmbtr,
mwart     like bseg-mwart,
hwbas     like bseg-hwbas,
aufnr     like bseg-aufnr,
projk     like bseg-projk,
shkzg     like bseg-shkzg,
kokrs     like bseg-kokrs,
end of t_bseg.
data: it_bseg type standard table of t_bseg initial size 0,
      wa_bseg type t_bseg.
select bukrs belnr gjahr BLDAT monat budat xblnr awtyp awkey
up to 100 rows
from bkpf
into table it_bkpf.
if sy-subrc EQ 0.
select bukrs belnr gjahr buzei mwskz umsks prctr hkont xauto koart
         dmbtr mwart hwbas aufnr projk shkzg kokrs
    from bseg
    into table it_bseg
    FOR ALL ENTRIES in it_bkpf
    where bukrs eq it_bkpf-bukrs and
          belnr eq it_bkpf-belnr and
          gjahr eq it_bkpf-gjahr.
endif.
CODE
You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
    SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT
    statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol
    itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result
    set. If the internal table itab does not contain any entries, the system treats the statement as though there were
    no WHERE cond condition, and selects all records (in the current client).
    for example:
       SELECT * FROM sflight INTO wa_sflight
                 FOR ALL ENTRIES IN ftab
                 WHERE CARRID = ftab-carrid AND
                  CONNID = ftab-connid AND
                         fldate = '20010228'.
    this condition, return all entries of the sflight
THANKS
MRUTYUN

Question about 'hosts: cluster' entry in /etc/nsswitch.conf

Hi~
my system have "hosts: cluster files dns" entry in /etc/nsswitch.conf.
I know 'files' to see the '/etc/hosts'.
I want to know that 'cluster' to see 'what file'.
Thanks,

'cluster' denotes internal lookups, i.e. no file on the file system. If I recall correctly, it allows the system to look up the cluster interconnect private addresses.
Tim
---

Dumb question about user_sdo_geom_metadata DIMINFO entries

I'm sure that this is a dumb question!
I create a new entry in user_sdo_geom_metadata as follows...
INSERT INTO USER_SDO_GEOM_METADATA
VALUES ( 'PR_A', 'GEOM',
MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('X',190000.0,640000.0, 0.05),
MDSYS.SDO_DIM_ELEMENT('Y',120000.0,680000.0, 0.05)
NULL );
But when I select the DIMINFO from the table...
SQL> select diminfo from user_sdo_geom_metadata a where table_name = 'PR_A';
DIMINFO(SDO_DIMNAME, SDO_LB, SDO_UB, SDO_TOLERANCE)
SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', 190000, 640000, 0), SDO_DIM_ELEMENT('Y', 1200
00, 680000, 0))
The sdo_dim_element and sdo_tolerance
elements show no decimal places.
Is this because I have not set some
display number format option in SQLPLUS
or for some other reason?
regards
Simon

Simon,
If you are using an old sqlplus client
(815) then you won't be able to see the decimal places in the diminfo object.
But if you hace a newer (816/817) sqlplus
client you should be able to see the decimal places.
If you are not seeing them in these clients
then there might be some format paramter set
to show numbers without decimals.
You can do a
show numformat
in sqlplus to see if there is any format set for that paramter.
null

Question about synchronized re-entry

Suppose I have the following code:
* method performs actions that require synchronization on state but
* the programmer ensures manually that it is only called in a context
* where we are already synchronized on state
private void veryPrivateMethod() {
    //synchronized(state) { (*) required?
    if (state == 999) {
        // perform actions that require synchronization on state
public void anotherMethod() {
    synchronized(state) {
        if (state == 42)
            state = 43;
        veryPrivateMethod();
}See (*): If I ensure manually that veryPrivateMethod will only be called in a context where we are already synchronized on state, do I still need to specifically synchronize on state in the method (reentrant synchronization), or will it be better performance-wise and still safely synchronized if I omit the synchronized statement in veryPrivateMethod()?
Thanks!

gimbal2 wrote:
932196 wrote:
I synchronize on it whenever I change / compare-change it. Is this a bad ideaThat's a maybe. Its not a bad idea, as long as you realize that doing this has no special meaning and will offer no special protection. You can synchronize on just about any object you want, as long as other threads synchronize on the exact same object when wanting to execute the same section(s) of volatile code.the comment in the example is:
// perform actions that require synchronization on statethis leads me to believe that the code is not correctly synchronized currently. like i said, changing the reference to the object you are synchronizing on pretty much always leads to broken code.

Since I installed the latest version of Firefox, my Google search system has forgotten about my past entries and is not adding on each search topic etc as I search. Is this a GOOGLE or a Firefox issue?

Example. I searched for NYT.COM. In past the system remembers and when I start typing ny it immediately fills in nyt.com and other options related to nyt.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*https://support.mozilla.org/kb/Websites+look+wrong

Question about my log entry showing data file is excluded.

I am new user of Sophos for Mac. I have OS 10.10.3 installed. My log says: com.sophos.intercheck: Info: Exclusion: /Volumes/Data/ at 12:48 on 13 June 2015
com.sophos.intercheck:
com.sophos.intercheck: Info: Exclusion: /Volumes/Time Machine Backups at 12:48 on 13 June 2015
com.sophos.intercheck: I understand the time machine exclusion, but not the Volumes/Data. I have excluded nothing in preferences. In "On-Access," the excluded items pane is blank. Is the above normal for a log in a situation where no exclusions have been made (although the check network volumes (like time machine?) has not been ticked). Thanks.

Hi again bobalaska,
Is /Volumes/Data located on a network? that would be the obvious reason for that exclusion to exist..

Query about calendar entries - Asha 311

Just purchased an Asha 311 and need some info. about the calendar entries that I made (a To-do list).
To the right of the entry there appears a gray-scale dot, which, when touched, turns green. The entry vanishes to the bottom of the list. Touch the green dot and the entry re-dates itself to two weeks after the original date and re-positions itself accordingly.
Please let me know the significance of this gray-turned-green icon and how I can prevent my calendar entries vanishing and re-positioning themselves to the wrong dates.
Thanks in advance.
CLYDE

Hi CLYDE1963,
Welcome to the Nokia Support Discussions!
This is a normal behavior of the phone. We suggest not to tap the gray-scale dot since it will notify you if you have already set the time and tone for it. If you will do it again, it means that the entry has been finished or has been done.
Hope this helps.

Adding menu entry to "About Third Party Plug-Ins..."

I am trying to find the language-independent identifier for the "About Third Party Plug-Ins..." menu in the Help menu but I can't seem to find it. Can someone help me find the identifier so that I can add my plug-in's about menu item entry to it? Here is the code that I am currently using, and I understand that I would need to modify it slightly to add it to the submenu:
AVMenu HelpMenu = NULL;AVMenuItem AboutItem = NULL;
AVMenubar TheMenubar = AVAppGetMenubar ();
ExecProcPtr = ASCallbackCreateProto (AVExecuteProc, &ExecProc);
CompEnabledProcPtr = ASCallbackCreateProto (AVComputeEnabledProc,
     &ComputeEnabledProc);
CompMarkedProcPtr = ASCallbackCreateProto (AVComputeMarkedProc,
     &ComputeMarkedProc);
HelpMenu = AVMenubarAcquireMenuByName (TheMenubar, "Help");
if (HelpMenu) {
     AboutItem = AVMenuItemNew ("About S4i Express Annotate Plugin", "ABDE:S4IXPAPExpressAnnotate", NULL,
     false, NO_SHORTCUT, 0, NULL, gExtensionID);     if (AboutItem == NULL) {
     AVAlertNote ("Unable to create Express Menu Item, not loading.");
     return false;     }     AVMenuItemSetExecuteProc (AboutItem, ExecProcPtr, NULL);     AVMenuItemSetComputeEnabledProc (AboutItem,          CompEnabledProcPtr,NULL);
     AVMenuItemSetComputeMarkedProc (AboutItem,
          CompMarkedProcPtr,NULL);
     AVMenuAddMenuItem (HelpMenu, AboutItem, 1);     AVMenuRelease (HelpMenu);}
Thank you for all your help!

Use the Plugin Wizard to create it for you...
However, I see a MAJOR PROBLEM with the code that you posted.
You are using Adobe's developer extension ("ABDE:S4IXPAPExpressAnnotate") and NOT your own. You need to register your own extension and use that for your plugin(s).

[SOLVED] Need help with rEFInd boot entry for rsync backup

I made a successful backup my arch install to an other internal SSD disk (from my HDD).
But now I can't figure out how to make a boot entry for this drive. The wiki only mentions GRUB, which I do not use.
This is the fstab for my HDD:
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda5
UUID=c1822e3c-e037-4445-bdd8-b71778237dee / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=SYSTEM_DRV
UUID=D2DF-9F74 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
And this is the fstab on my SSD which I edited:
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb1
UUID=c61a1301-4728-465d-b40b-bde5e084eb50 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=SYSTEM_DRV
UUID=D2DF-9F74 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
But I'm not sure about the /boot entry, do I need something else here?
Afterward I tried updating rEFInd by reinstalling using refind-install, but that did not work.
ps. I dual boot with Windows.
Last edited by Devenda (2014-08-18 07:58:07)

I also tried adding the menu entry manually by editing refind.conf but that didn't work. I got:
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
Here is some additional info:
refind.conf:
menuentry "SSD Arch Linux" {
icon /EFI/refind/icons/os_arch.png
volume "ArchSSD"
loader /boot/vmlinuz-linux
initrd /boot/initramfs-linux.img
options "root=/dev/sdb1 ro"
I hope this helps.
blkid
/dev/sda1: LABEL="WINRE_DRV" UUID="7C2ADD1D2ADCD4EC" TYPE="ntfs" PARTUUID="b7137819-2ca6-40fb-9167-b73ac37d8d96"
/dev/sda2: LABEL="SYSTEM_DRV" UUID="D2DF-9F74" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="9c77b526-730f-42f9-9904-f9a31b205687"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="f4d5275b-24c1-4847-b937-345bc23bec89"
/dev/sda4: LABEL="Windows 8" UUID="38D6E449D6E408C8" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="d777a359-f42c-4629-a07c-cc55316352fe"
/dev/sda5: UUID="c1822e3c-e037-4445-bdd8-b71778237dee" TYPE="ext4" PARTUUID="3d282004-2515-4630-b82e-35ed7f707b89"
/dev/sda6: UUID="F80680CC06808D76" TYPE="ntfs" PARTUUID="575bc623-c7f1-44da-a79e-220ce3c98d9b"
/dev/sda7: LABEL="Lenovo_Recovery" UUID="0898D76B98D75632" TYPE="ntfs" PARTUUID="99bfc6d6-1b71-46d1-887e-2f7e65e3eab1"
/dev/sdb1: LABEL="ArchSSD" UUID="c61a1301-4728-465d-b40b-bde5e084eb50" TYPE="ext4" PARTUUID="e87704a5-01"
lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs WINRE_DRV 7C2ADD1D2ADCD4EC
├─sda2 vfat SYSTEM_DRV D2DF-9F74 /boot
├─sda3
├─sda4 ntfs Windows 8 38D6E449D6E408C8
├─sda5 ext4 c1822e3c-e037-4445-bdd8-b71778237dee /
├─sda6 ntfs F80680CC06808D76
└─sda7 ntfs Lenovo_Recovery 0898D76B98D75632
sdb
└─sdb1 ext4 ArchSSD c61a1301-4728-465d-b40b-bde5e084eb50
sr0
boot tree
/boot
├── BOOT
│   └── boot.sdi
├── BOOTSECT.BAK
├── EFI
│   ├── Boot
│   │   ├── bootx64.efi
│   │   ├── LenovoBT.EFI
│   │   ├── License.txt
│   │   └── ReadMe.txt
│   ├── gummiboot
│   │   └── gummibootx64.efi
│   ├── Lenovo
│   │   └── Boot
│   │   ├── BCD
│   │   ├── BCD.LOG
│   │   ├── BCD.LOG1
│   │   ├── BCD.LOG2
│   │   ├── bg-BG
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── bootmgfw.efi
│   │   ├── bootmgr.efi
│   │   ├── BOOTSTAT.DAT
│   │   ├── boot.stl
│   │   ├── cs-CZ
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── da-DK
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── de-DE
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── el-GR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── en-GB
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── en-US
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── es-ES
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── et-EE
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── fi-FI
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── Fonts
│   │   │   ├── chs_boot.ttf
│   │   │   ├── cht_boot.ttf
│   │   │   ├── jpn_boot.ttf
│   │   │   ├── kor_boot.ttf
│   │   │   ├── malgun_boot.ttf
│   │   │   ├── malgunn_boot.ttf
│   │   │   ├── meiryo_boot.ttf
│   │   │   ├── meiryon_boot.ttf
│   │   │   ├── msjh_boot.ttf
│   │   │   ├── msjhn_boot.ttf
│   │   │   ├── msyh_boot.ttf
│   │   │   ├── msyhn_boot.ttf
│   │   │   ├── segmono_boot.ttf
│   │   │   ├── segoen_slboot.ttf
│   │   │   ├── segoe_slboot.ttf
│   │   │   └── wgl4_boot.ttf
│   │   ├── fr-FR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── hr-HR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── hu-HU
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── it-IT
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── ja-JP
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── ko-KR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── lt-LT
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── lv-LV
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── memtest.efi
│   │   ├── nb-NO
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── nl-NL
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── pl-PL
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── pt-BR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── pt-PT
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── qps-ploc
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── Resources
│   │   │   ├── bootres.dll
│   │   │   └── en-US
│   │   │   └── bootres.dll.mui
│   │   ├── ro-RO
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── ru-RU
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── sk-SK
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── sl-SI
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── sr-Latn-CS
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── sv-SE
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── tr-TR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── uk-UA
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── zh-CN
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── zh-HK
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   └── zh-TW
│   │   ├── bootmgfw.efi.mui
│   │   ├── bootmgr.efi.mui
│   │   └── memtest.efi.mui
│   ├── Microsoft
│   │   └── Boot
│   │   ├── BCD
│   │   ├── BCD.LOG
│   │   ├── BCD.LOG1
│   │   ├── BCD.LOG2
│   │   ├── bg-BG
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── bootmgfw.efi
│   │   ├── bootmgr.efi
│   │   ├── BOOTSTAT.DAT
│   │   ├── boot.stl
│   │   ├── cs-CZ
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── da-DK
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── de-DE
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── el-GR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── en-GB
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── en-US
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── es-ES
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── et-EE
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── fi-FI
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── Fonts
│   │   │   ├── chs_boot.ttf
│   │   │   ├── cht_boot.ttf
│   │   │   ├── jpn_boot.ttf
│   │   │   ├── kor_boot.ttf
│   │   │   ├── malgun_boot.ttf
│   │   │   ├── malgunn_boot.ttf
│   │   │   ├── meiryo_boot.ttf
│   │   │   ├── meiryon_boot.ttf
│   │   │   ├── msjh_boot.ttf
│   │   │   ├── msjhn_boot.ttf
│   │   │   ├── msyh_boot.ttf
│   │   │   ├── msyhn_boot.ttf
│   │   │   ├── segmono_boot.ttf
│   │   │   ├── segoen_slboot.ttf
│   │   │   ├── segoe_slboot.ttf
│   │   │   └── wgl4_boot.ttf
│   │   ├── fr-FR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── hr-HR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── hu-HU
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── it-IT
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── ja-JP
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── ko-KR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── lt-LT
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── lv-LV
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── memtest.efi
│   │   ├── nb-NO
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── nl-NL
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── pl-PL
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── pt-BR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── pt-PT
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── qps-ploc
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── Resources
│   │   │   ├── bootres.dll
│   │   │   ├── en-US
│   │   │   │   └── bootres.dll.mui
│   │   │   └── nl-NL
│   │   │   └── bootres.dll.mui
│   │   ├── ro-RO
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── ru-RU
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── sk-SK
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── sl-SI
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── sr-Latn-CS
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── sr-Latn-RS
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── sv-SE
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── tr-TR
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── uk-UA
│   │   │   ├── bootmgfw.efi.mui
│   │   │   └── bootmgr.efi.mui
│   │   ├── zh-CN
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   ├── zh-HK
│   │   │   ├── bootmgfw.efi.mui
│   │   │   ├── bootmgr.efi.mui
│   │   │   └── memtest.efi.mui
│   │   └── zh-TW
│   │   ├── bootmgfw.efi.mui
│   │   ├── bootmgr.efi.mui
│   │   └── memtest.efi.mui
│   ├── refind
│   │   ├── icons
│   │   │   ├── arrow_left.png
│   │   │   ├── arrow_right.png
│   │   │   ├── boot_linux.png
│   │   │   ├── boot_win.png
│   │   │   ├── func_about.png
│   │   │   ├── func_exit.png
│   │   │   ├── func_firmware.png
│   │   │   ├── func_reset.png
│   │   │   ├── func_shutdown.png
│   │   │   ├── os_altlinux.png
│   │   │   ├── os_arch.png
│   │   │   ├── os_centos.png
│   │   │   ├── os_chrome.png
│   │   │   ├── os_clover.png
│   │   │   ├── os_debian.png
│   │   │   ├── os_ecomstation.png
│   │   │   ├── os_fatdog.png
│   │   │   ├── os_fedora.png
│   │   │   ├── os_freebsd.png
│   │   │   ├── os_freedos.png
│   │   │   ├── os_funtoo.png
│   │   │   ├── os_gentoo.png
│   │   │   ├── os_gummiboot.png
│   │   │   ├── os_haiku.png
│   │   │   ├── os_hwtest.png
│   │   │   ├── os_kubuntu.png
│   │   │   ├── os_legacy.png
│   │   │   ├── os_linuxmint.png
│   │   │   ├── os_linux.png
│   │   │   ├── os_lubuntu.png
│   │   │   ├── os_mac.png
│   │   │   ├── os_mageia.png
│   │   │   ├── os_mandriva.png
│   │   │   ├── os_manjaro.png
│   │   │   ├── os_mythbuntu.png
│   │   │   ├── os_netbsd.png
│   │   │   ├── os_openbsd.png
│   │   │   ├── os_opensuse.png
│   │   │   ├── os_redhat.png
│   │   │   ├── os_refind.png
│   │   │   ├── os_refit.png
│   │   │   ├── os_slackware.png
│   │   │   ├── os_suse.png
│   │   │   ├── os_ubuntu.png
│   │   │   ├── os_unknown.png
│   │   │   ├── os_win.png
│   │   │   ├── tool_apple_rescue.png
│   │   │   ├── tool_memtest.png
│   │   │   ├── tool_mok_tool.png
│   │   │   ├── tool_part.png
│   │   │   ├── tool_shell.png
│   │   │   ├── tool_windows_rescue.png
│   │   │   ├── transparent.png
│   │   │   ├── vol_external.png
│   │   │   ├── vol_internal.png
│   │   │   └── vol_optical.png
│   │   ├── icons-backup
│   │   │   ├── arrow_left.png
│   │   │   ├── arrow_right.png
│   │   │   ├── boot_linux.png
│   │   │   ├── boot_win.png
│   │   │   ├── func_about.png
│   │   │   ├── func_exit.png
│   │   │   ├── func_firmware.png
│   │   │   ├── func_reset.png
│   │   │   ├── func_shutdown.png
│   │   │   ├── os_altlinux.png
│   │   │   ├── os_arch.png
│   │   │   ├── os_centos.png
│   │   │   ├── os_chrome.png
│   │   │   ├── os_clover.png
│   │   │   ├── os_debian.png
│   │   │   ├── os_ecomstation.png
│   │   │   ├── os_fatdog.png
│   │   │   ├── os_fedora.png
│   │   │   ├── os_freebsd.png
│   │   │   ├── os_freedos.png
│   │   │   ├── os_funtoo.png
│   │   │   ├── os_gentoo.png
│   │   │   ├── os_gummiboot.png
│   │   │   ├── os_haiku.png
│   │   │   ├── os_hwtest.png
│   │   │   ├── os_kubuntu.png
│   │   │   ├── os_legacy.png
│   │   │   ├── os_linuxmint.png
│   │   │   ├── os_linux.png
│   │   │   ├── os_lubuntu.png
│   │   │   ├── os_mac.png
│   │   │   ├── os_mageia.png
│   │   │   ├── os_mandriva.png
│   │   │   ├── os_manjaro.png
│   │   │   ├── os_mythbuntu.png
│   │   │   ├── os_netbsd.png
│   │   │   ├── os_openbsd.png
│   │   │   ├── os_opensuse.png
│   │   │   ├── os_redhat.png
│   │   │   ├── os_refind.png
│   │   │   ├── os_refit.png
│   │   │   ├── os_slackware.png
│   │   │   ├── os_suse.png
│   │   │   ├── os_ubuntu.png
│   │   │   ├── os_unknown.png
│   │   │   ├── os_win.png
│   │   │   ├── tool_apple_rescue.png
│   │   │   ├── tool_memtest.png
│   │   │   ├── tool_mok_tool.png
│   │   │   ├── tool_part.png
│   │   │   ├── tool_shell.png
│   │   │   ├── tool_windows_rescue.png
│   │   │   ├── transparent.png
│   │   │   ├── vol_external.png
│   │   │   ├── vol_internal.png
│   │   │   └── vol_optical.png
│   │   ├── keys
│   │   │   ├── altlinux.cer
│   │   │   ├── canonical-uefi-ca.der
│   │   │   ├── fedora-ca.cer
│   │   │   ├── openSUSE-UEFI-CA-Certificate.cer
│   │   │   ├── refind.cer
│   │   │   └── SLES-UEFI-CA-Certificate.cer
│   │   ├── refind.conf
│   │   ├── refind.conf.old
│   │   ├── refind.conf-sample
│   │   └── refind_x64.efi
│   └── tools
├── grub
│   ├── grub.cfg
│   └── grub.cfg.example
├── initramfs-linux-fallback.img
├── initramfs-linux.img
├── loader
│   ├── entries
│   │   └── arch.conf
│   └── loader.conf
├── refind_linux.conf
└── vmlinuz-linux
refind_linux.conf
"Boot with standard options" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee quiet "
"Boot to single-user mode" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee quiet single"
"Boot with minimal options" "ro root=UUID=c1822e3c-e037-4445-bdd8-b71778237dee"

I'm about to buy my first MacBook Pro and I need a little help

Hi everybody!
I'm about to buy my first MacBook pro and I have no experience on mac so I would be really thankfull if someone guides me to get an appropriate Notebook
Here are some imformations about what I want from a MacBook Pro:
1) I have a limited budget so the price can not go anywhere upper than 2,000 dollars
2) I'm a graphic designer working with photoshop, 3ds max and maya so I need strong CPU and VGA card
3) 15 inches and high resolution
4) Absolutly Lion OS
5) weight doesn't matter!
6) Ram doesn't matter cause I can upgrade it myself later when I got enogh money
7) Hard capacity doesn't matter (I can upgrade it later too)
8) It would be much better if it got HDMI port
That's all
Thanks for reading and answering

Except for #8, you're talking about the new entry-level MacBook Pro for $1,799.00 (see at http://store.apple.com/us/configure/MD103LL/A). It's a little less expensive at Amazon and you won't have to pay tax on it until you file next year instead of up-front.
It will do everything you need and, yes, you can upgrade it yourself when you get more cash. In fact, if you're willing to spend another $160 (still under your $2K limit) you can go ahead and upgrade the RAM to 16 GB. Later, spend $400 and put in a 512GB SSD.
Now to item #8. From monoprice, you can get a Thunderbolt-to-HDMI adapter for under $7 - click here.
You'll have exactly what you need for under $2K. Go for it...
Clinton

About ndi, bw entries in mm

Similar Messages

Maybe you are looking for