About Query report

Hi all ,
i want to design report  which contain following information.
item code,chapter id,opening balance,GRPO qty,GRPO value,Consumtion qty(any transaction which causes reduction in quantity),Goods Return Qty,warehouse transfer qty,Closing balance.
selection creiteria is date wise
thanx in advance.
regards,
Chetan.

Chetan,
Why don't you try to create this report yourself first? I am sure the people here would happily help you amending an existing query instead of writing one from scratch for you.
Please post here the query you started.
Regards,
Nat

Similar Messages

  • The problem about  integrate  Portal and R/3 : vendor query report problem

    Hi everyone :
       We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
       But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors,  because the cost is too much .
       And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
       I think this is a general problem when integrate Portal and R/3, BW .
       Is there somebody had solved this problem or give any advice?
       Any discuss is welcome.
    Best Regards,
    Jianguo Chen

    Hi,
    I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
    Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
    Hth,
    Michael

  • Can't select any value in radio to query report.

    Dear Support,
    About BI-BASE-B version is 1000.7.40.2.20.20130621014800 in portal,when we select value in radio to query report which lend to white screen,so i think that may be issue.But if i set manual value to query report,it is fine.So Connection is  available for system NBPCLNT800  in portal.
    error msg:
    #2.#2014 03 30 20:16:38:377#+0800#Error#/Applications/BI#
    #BW-BEX-ET-WJR#sap.com/com.sap.ip.bi.base#C000C0A8183501B60000000300007621#118639550000000004#sap.com/com.sap.ip.bi.web.portal.integration#com.sap.ip.bi.base.portal.connection.Localization#SYSADM#26##100FCD4DB80411E39272000007124BBE#113b773bb80511e3c097000007124bbe#113b773bb80511e3c097000007124bbe#0#Thread[HTTP Worker [@847096065],5,Dedicated_Application_Thread]#Plain##
    BI exception with class "ConnectionException" and message "Connection is not available for system NBPCLNT800". See default trace for log ID "null".#
    Thanks

    Hello Tom,
    could you please close this thread properly, so that others can find the solution, too? Please have a look at the blog How to close a discussion and why if you're unsure on how to do that. Thank you!
    Regards,
    Steffi.

  • Steps to save a Query/Report as Excel file in Share folder

    Hi,
    I have a requirement where i need to schedule a BI report automatically on a daily basis and save it in a Sharepoint folder as a excel file.  I have gone through the Forums but didnt get a clear idea on how to proceed this with.  I read about RSCRM_BAPI transaction but i hope we need to do this manually to save the file each time.  Also, in Broadcaster there are options only to send Email & save in Portal. 
    So, if anybody have idea on saving a Query/Report as excel file in a Share folder automatically, kindly help me in suggesting the steps to do this activity.
    Regards,
    Murali

    Hi
    1. Create Three Floders in AL11 i.e. in Apllication Server. Eg Name it F1, F2 and F3.
    2. First dump the .csv files into F1. (Name xyz.csv).
    3. Then using UNIX/WINDOWS (depends on your OS) script , first check the file is there are not in F1, if yes then rename the file with date and time or date and transfer the files from F1 to F2 i.e xyz06032010.csv.
    4. Then Create a small ABAP program to check the file in F2, if it is there then Trigger the Event, and using that event you execute teh PC.
    5. Then using UNIX/WINDOWS (depends on your OS) script , transfer the files from F2 to F3 i.e xyz06032010.csv
    6. Next day morning F1 and F2 are empty and F3 is having the backup files.
    So use this method, I used the similar logic and it is working fine.
    Timinings are importent i.e what time you need to dump the fule in F1 and what time you need to run UNIX/WINDOWS (depends on your OS) script , transfer the files from F1 to F2 and what time UNIX/WINDOWS (depends on your OS) script , transfer the files from F2 to F3.
    OR
    1. Create Two Floders in AL11 i.e. in Apllication Server. Eg Name it F1 and F2
    2. First dump the .csv files into F1. (Name xyz.csv)
    3. Then load the data using InfoPackage, through PC.
    4. At the end of the load Attach a simple Program to Move the xyz.csv file from F1 to F2.
    5. So next day the file will come to F1 and the it will load and at the end it will move to F2.
    Else  you can use simple one or two lines of UNIX/WINDOWS (depends on your OS) script to move the file from F1 to F2 , once you load is over.
    While moving the file from F1 to F2 you can append the date at the end of the file and then move to F2, it is use full for future reference.
    See Blogs and Article, similar logic...
    https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    How to transfer the Data from SAP-System to Non-SAP system without additional Cost/License
    /people/surendrakumarreddy.koduru/blog/2009/03/11/how-to-transfer-the-data-from-sap-system-to-non-sap-system-without-additional-costlicense
    To Check the Files/Reports in Application Server and Trigger Mail Alerts.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4096bf2d-bcea-2b10-4ab4-e0683830d9b2&overridelayout=true
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 12, 2010 6:41 AM

  • ASP Page to query report

    Hi there,
    So a long time ago we had a developer who set up an asp page that loads through some of our applications.  The asp page points to a specific report, depending on where it is called from within our application and also the parameters for that specific report are provided in the URL when it is called.  Then the report being requested from within our application is displayed with the given paramaters that are provided by our application. 
    We are working on preparing to migrate everything to a new server, this is all on a windows 2003 server running like crystal server 8 or something, to a new server that is currently running crystal server 2013.  Is what I am describing possible on crystal server 2013 and if so, what would I need to set up server side to allow our applications to work the same as they are? 

    If you pull the reports from Crystal Reports Server (CRS), you'll have to log in to CRS to get to them.  You'll also need the latest Service Pack of the BI Platform 4.1 .NET SDK to connect to the server. (version 14.1.x of the assemblies).  You'll run a query on the CMS database (through the SDK - you can't query it directly) to get information about the report and then either build an OpenDocument URL to open the report or open it in the viewer that comes with the SDK.  You can find more information about OpenDocument here:  http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_opendocument_en.pdf.  Unfortunately, the documentation for the .NET SDK is virtually non-existent and what is available is not very good.  However, I have some sample C# code for working with the SDK on my website (http://www.dellstinnett.com/sample_code.html) that includes a couple of tutorial programs that show how to work with the SDK.
    If you're not connecting to CRS, you'll use the SAP Crystal Reports for Visual Studio SDK, which you can download here:  http://scn.sap.com/docs/DOC-7824.  Get the latest "Install Executable" for integration into Visual Studio - the other downloads on the same line are for various types of runtime installs.  This will allow you to open reports directly from files.  You can get more information about this SDK here:  SAP Crystal Reports, developer version for Microsoft Visual Studio – SAP Help Portal Page
    -Dell

  • SQL Query Report (Customize link)

    I have an SQL query report with bind variables so that users can choose conditions for the query. If I don't have any conditions, the report is empty. How do I get it to display all the records. I tried typing * but it didn't work.
    Basically I want it to act like the Query Wizard's Customize feature. The report give me all the records. I can query one field or all the fields.
    In the SQL report's Customize feature, I have to enter a value for all the bind variables I have. What if I just want to query one field. What do I put in the others to indicate that I want all. I hope this makes some sort of sense and that someone out there knows what I'm blabbing about.

    Hi,
    I h've same type of requirement in most of my reports in the application and I h've solved this in the sql of the report itself. Let's see a example report from the table scott.emp with a sql like
    Select EMPNO,
    ENAME,
    JOB,
    MGR,
    HIREDATE,
    SAL,
    DEPTNO
    From scott.emp
    Where EMPNO = nvl(:v_empno,EMPNO)
    and DEPTNO = nvl(:v_deptno,DEPTNO)
    where :v_empno and :v_deptno are bind variables to this report and if there is no arguements passed to these arguements all the records will be retrieved from the table ..likeley if value for any one of these arguements is passed then this sql will return only those records which meet that condition.
    Hope this helps
    -Krishnamurthy

  • Multi-part related query reports

    http://download-east.oracle.com/docs/html/B10310_01/orbr_concepts1.htm#1012365
    Can someone provide me better info about 'Multi-part related query reports '

    Hi,
    yes you can have multiple query in your report. So you have multiple groups in your data model. Then you must put multiple repeating frames in your layout in order to extract data from your queries, selecting the desired group in the source property of your repeating frame.
    Bye
    Raffy

  • Problems about  query filter (BEx).

    Hello there,
    I have some problems about  query filter (BEx).
    I have master data and I want to use attribute in this master data to dynamic filter in query(BEx).
    But this attribute is key figure. I can't done it now. TT
    Is this possible? If yes, could anyone advise how this is to be done?
    Thanks in advance.

    Hi
    In BEx there is option as 'Exceptions' & 'Conditions'. If you go in condition, you can specify range for key figure output. This is either predefined or by user selection. You create the condition as per your requirement & it will show you filtered data.
    How to create conditions you will find easily on this site.
    You can create as many conditions as no of filters you want. You can create these at query level also at report output level.

  • Dump in SAP query report

    Dear All,
    I have written some development in SAP Query report.
    The main aim is to assign to own defined parameter par1  combination of version and object-partner (internal order with defined order type).
    The text is following:
    DATA: it_aufk like aufk
          occurs 10 with header line.
       DATA: p-auart like aufk-auart.
       select * from AUFK into table it_aufk
         where AUFNR = coep-parob1+2(12).
      if sy-subrc = 0.
       if coep-versn = '000'.
        par1 = 1.
       elseif coep-versn = 'GR0'.
        par1 = 2.
      endif.
    endif.
      if coep-versn = 0 and ( p-auart = 'V112' or p-auart = 'V114' ) .
        par1 = 1.
      endif.
    I have performed check and generated this info-set successfully.
    Than I have generated program in queries - other function- generate program.
    I execute report and get dump.
    What did I miss?
    With best regards,
    Kamila.

    Category               ABAP Programming Error
    Runtime Errors         CONVT_NO_NUMBER
    ABAP Program           AQICZCO=========QUE_KZHAKEN_01
    Application Component  Not Assigned
    Date and Time          15.12.2011 16:18:35
    Short text
         Unable to interpret "GR0" as a number.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "AQICZCO=========QUE_KZHAKEN_01" had to be termi
          because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         An exception occurred that is explained in detail below.
         This exception cannot be caught in the context of the current statement.
         The reason for the exception is:
         The program attempted to interpret the value "GR0" as a number, but
         since the value contravenes the rules for correct number formats,
         this was not possible.
    How to correct the error
        Whole numbers are represented in ABAP as a sequence of numbers, possibl
         with an algebraic sign.
        The following are the possibilities for the representation of floating
        point numbers:
          [algebraic sign][mantissa]E[algebraic sign][exponent]
          [algebraic sign][whole number part].[fraction part]
        For example, -12E+34, +12E-34, 12E34, 12.34
        If the error occurred in your own ABAP program or in an SAP
        program you modified, try to remove the error.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "CONVT_NO_NUMBER" " "
        "AQICZCO=========QUE_KZHAKEN_01" or "AQICZCO=========QUE_KZHAKEN_01"
        "START-OF-SELECTION"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

  • Matrix query report

    Hi ,experts
                i just need a matrix query report on sales order. It contains quanity ana month

    Hi,
    Welcome you post on the forum.
    You may check this first: Monthly Sales By Geography
    Please do not post more than one thread with similar question. Make sure your question is easily understandable.
    You could also get my book from Packtpub for knowing more about query in B1.
    Thanks,
    Gordon

  • SAP QUERY report for vendor line items

    Hi
    I have created a SAP QUERY report for vendor line items with fields vendor no.,vendor name,amount,company code and period.But there is one line item i donot know from wher system is getting it picked with is not in that vedor account,when i compare with fbl1n.I checked the document number too...the same doc number is twice in my query report.One with correct amount and another with wrong one.How do i chk.Where did i go wrong in creating query.I used logical database KDF.
    Please advise.

    i chked...how do we get the amount displayed in query...it just displays amount no debit credit symbol... i have selected BSEG-DMBTR field but no -/+ sign,how is it done in query,please suggest.

  • How to copy existing query report into new query report in SQ00

    Hi Experts,
    Hi Experts,
    I want to add fields "company code" "'region" to existing  query report AQZZ/SAPQUERY/FKF1============
    (list of vendor address) for this i done as following:
    1.In SQ01  go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
    2.I typed F1 in query field and click change button
    3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
    but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing  query report  into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
    one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK  i  am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup  /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
    please help regarding this which should be very beneficiary to my carrier.
    Regards,
    naresh

    Hi Experts ,
    I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
    Regards,
    naresh.

  • Stock Aging Query/Report

    Dear all,
    We are on SAP B1 2007 PL42 and using Moving average as our cost valuation method.
    It doesn't have an inbuilt stock aging report, I have searched through the forum but none of the queries arebshowing the correct aging of stocks. Could anyone have a query/report/addon for stock aging?
    Kind Regards,
    Asif

    Hi,
    Try this one,with warehouse code as input parameter
    select b.code, b.name, b.Wh, b.Bal, b.Val,
    isnull(case when b.days <30 then b.bal end,0)'0-30 Days' ,
    isnull(case when b.days between 30 and 60 then b.bal end,0) '30-60 Days',
    isnull(case when b.days between 60 and 90 then b.bal end,0) '60-90 Days',
    isnull(case when b.days between 90 and 120 then b.bal end,0) '90-120 Days',
    isnull(case when b.days between 120 and 150 then b.bal end,0) '120-150 Days',
    isnull(case when b.days between 150 and 180 then b.bal end,0) '150-180 Days',
    isnull(case when b.days >180 then b.bal end,0) 'Above 180 Days'
    from (
    select a.code,a.name,a.wh,a.bal,a.val,datediff(dd,dt,getdate())'days'
    from (
    select max(t0.itemcode)'Code',max(t0.Dscription)'Name',
    max(t0.Warehouse)'Wh',
    sum(t0.inqty-t0.outqty)'Bal',sum(t0.transvalue)'Val',max(t0.docdate)'dt'
    from oinm t0 inner join oitm t1 on t0.itemcode=t1.itemcode
    where t0.warehouse='[%1]'
    group by t0.itemcode
    )a
    )b order by code

  • Query Report:To Retrieve Data from A/R Invoice and A/P Invoice

    Hii Experts,
          I am a new Sap B1 Trainee.I am facing a problem when retrieving data from A/R Invoice and A/P Invoice in order to track
    Expenditure and Revenue according to a Bussiness partner,
    I am using union to retrieve the information,but it is saying a error that  Error Converting Varchar to Numeric and also
    i would like to know how can i show the total final payment by reflecting Downpayments in A/R Invoice and A/P Invoice
    With Regards
    Cherry.

    Hii.
    My Sap B1 version is 8.8.1 and patch level is 20. Actully i need a scenario where i can able to show both Expenditure and Revenue of a particular bussiness partner and profit/loss in a single query report.
    I need some tips regarding this,When i am doing union i am getting conversion error converting varchar to numeric when i take
    Sum(Line Total) from OINV and Sum(line total) OPCH group by docdate and docentry and BP .
    and another scenario is how to deduct A/P downpayment or A/R downpayment from A/P invoices and A/R invoice to get the final Revenue and Expenditure ..
    Thanks & Regards
    Cherry

  • SQL Query report region that only queries on first load

    Hello all,
    Is there any way in which you can prevent a SQL Query report region from quering data after every refresh?
    I would like to make a report that queries on the first load, but then I would like to change the individual values, and reload to show the change, but every time I reload the page the columns are queried and the original values are displayed once again...
    any ideas?
    -Mux

    Chet,
    I created a header process to create the HTMLDB_COLLECTION. It is something like:
    HTMLDB_COLLECTION.CREATE_COLLECTION_FROM_QUERY(
    p_collection_name => 'Course_Data',
    p_query => 'SELECT DISTINCT COURSE_ID, HTMLDB_ITEM.CHECKBOX(14,COURSE_ID) as "checker", TITLE, SUBJECT, COURSE_NUMB, SECTION, ENROLLED, null as "temp_term", null as "temp_title", null as "temp_crse_id", null as "temp_subj", null as "temp_crse_numb", null as "temp_sect", FROM DB_TBL_A, DB_TBL_B, DB_TBL_C, DB_TBL_D, DB_TBL_E, DB_TBL_F WHERE ...');
    The names were changed, for obvious reasons.
    I then created an SQL Report Region to see if it would work. The SQL is:
    SELECT c001, c002, c003
    FROM htmldb_collections
    WHERE collection_name = 'COURSE_DATA'
    When I run the page it says:
    ORA-20104: create_collection_from_query Error:ORA-20104: create_collection_from_query ExecErr:ORA-01008: not all variables bound
    Any idea why this is happening?
    I'm new to HTMLDB_COLLECTIONS, so I may be doing something wrong
    -Mux

Maybe you are looking for