About scroll bar in list

in basic list I have write some thing and move scroll bar in a position
in detail list ,I want the scroll bar's position same to basic list ,how to do it ,thanks

start with this:
http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts&file=00002468.html
if you need more help use google to search for a tutorial you
can follow. there are plenty out there, i belive.

Similar Messages

Customize Scroll Bar in List Box

Is it possible to customize/skin the scroll bar attached to a
list box component? My target platform is Flash 7. I essentially
just need to make it about twice as big as it is, but would like to
change the colors if possible.
Thanks in advance!

start with this:
http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts&file=00002468.html
if you need more help use google to search for a tutorial you
can follow. there are plenty out there, i belive.

Problems with scroll bars in list view

Hello,
I am using Xcelsius 2008 (Build Number 12,2,166). I am still having trouble with scroll bars on my list view control. Other list views in my dashboard seem to be ok. It seems that this list view is not ignoring the blank cells in my excel file. I have gone through many things to correct this problem. I have added a new list view, I have copied other list views that work correctly but still no success. It seems that the "Ignore Blank Cells" property is not working correctly. Does anyone have a solution for this?
Much Thx!

Hi Yusufel,
Please check the data whether the cells are really blank or having any space which could not be seen, etc.
With best wishes
BaaRaa.

Vertical Scroll bar In List Item

Dear All:
I have to fill up list box with 100 values and i want to see only 4 values at a time,next 4 values should be shown by scrolling down vartical scroll bar.(The same functionality as we usually see in web pages' list box)
I shall be very thankfull to u for any kind of help
Regards
Sam

Thanks for reply
Please let me know if i use FORM 9i then how can i do this task bcoz i didn't find such property like scroll bar ver in FORM 9i
Regards
Sam

Why is there no scroll bar in list of models

My question concerns the right-hand side of the screen that comes up when you open the Context tab of a Component Controller. The left hand side shows the context and the right-hand side shows a list of the models.
My component is using a lot of models. I'm at the point now where there are more than can be displayed on one page. However, there is no vertical scroll bar and I can't figure out how to scroll between the models other than by clicking on them with the mouse.
Is there some setting that needs to be turned on to activate a vertical scroll bar or is there a way with the keyboard to scroll between the models?
Thanks!

Open an OSS message (BC-DWB-WD-JAV).
Armin

Freezing scroll bar in list box

Hello,
I want the user to be able to read the list while I add new items to it.
the problem is that whenever a new item is added to the list the scroll jumps up - I want it to stay where ever it was (in case the user scrolled it...)
thanks

I tried this in 8.2.1 and 7.1, but can't reproduce this.
If I scroll down, and an item is added, the scroll position remains the
same. That is, if the nth position is the top most visible item, after the
addition, the nth position will still be the top most item. This means that
if the 9th item ("9") is the first visible item, and you add an item before
it, the 9th item will be "8".
If you don't like this behavior, you can read the TopRow property, and set
it to what you want. In the example above, when you insert an item before
the first visible item, read the TopRow, add the item, and set the new
TopRow to the old value + 1.
Regards,
Wiebe.

ITunes 11 scroll bar trouble

Hi folks,
this concerns iTunes 11.1.3 for Mac: when in the iTunes store to view my purchased items, I cannot use the left scroll bar (artist listing). The said scroll bar is visible only when the pointer rests on an item - the moment I approach the scroll bar with the pointer in order to scroll up or down the list, it simply disappears. Does anyone know a fix for this bug? Please, let me know. Thanks!
Frank M.

You don't have to scroll with your arrow directly on the bar. Scroll works when your arrow is positioned in this area:

IView and Scroll bars

Hi...
I need to hide the scroll bars in my iViews... my content have scroll bars, and iViews is generating one more... So, I need to hide iviews scroll bars, because I can't edit the content to hide in there.
What can I do?
iViews has any option to hide scroll bars? I see a option called "window features". Maybe putting some option there... I don't know... Anyone can help me?
Thanks a lot....

Hi Glauber,
First, make sure that the iview size (in Appearance-Size) content area is sufficient to display your content.
Then, in the iviews that you have in the Page, just try to set "SHOW TRAY" Property of each iview in properties of that iview to "NO". It will remove vertical scroll of the iview.
Also checkout this webblog about scroll bar when using URL isolation.
Those pesky scrollbars when using URL isolation
Quote from SAP Darrell Merryweather:
"Normal content generally isn't a problem because the scrollbars will only appear if the content extends past the height of the page, however, this is also dependant on client browsers, etc, so the main scrollbar cannot be completely guaranteed to dissappear. However, the inner scrollbar (which is what the blog talks about) shouldn't be a problem because the content is added to the main page and therefore the page is flat, so inner scrollbars shouldn't be an issue .Like the other people said, also remove the tray in the iview properties, although I don't think that the tray has scrollbars, but its been a while since we used the tray on an iview, so I can't be 100% certain".
Hope that helps and award points for helpful suggestions.
Ray

List Box display to synchronize with Scroll bar.

I will like to know if anyone here can help to amend or advise on the attached VI in order to allow the List Box display to synchronize with the Scroll bar.
As the VI is in run mode, i would like to see 9.CD, 10.Troja, 11. Red... and so on to be displayed as it is being executed.
Thanks.
Attachments:
try.vi ‏13 KB

Hi Gelb,
Glad to hear you've got it working
I realised afterwards that my code will not work correctly if the last line is partially hidden, ie the list box does not display an exact number of lines. So I've added a +1 after the array size function to correct this, see attached vi.
You'll notice that I read the NumRows property of the listbox - I've done this so that if you decide to change the listbox height the code will still work without you having to go in and change anything. In your code you would have to change the constant (currently a 7) before the comparison primative to the new height. Also, in my new vi I've assumed the listbox height isn't going to change during the time it gets populated so I've move the NumRows property out of the for loop and read it only once - saves a bit of time
Using a for loop with auto indexing rather than a while loop also means that I don't need to index the input array every time or worry about when the loop will stop.
Hope this all helps
Dave
Message Edited by DavidU on 06-26-2008 08:59 AM
Attachments:
Scroll Listbox 2.vi ‏15 KB

The status bar is pushed up at about 3/4 of the screen, so I can view onlu firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full vi

The status bar is pushed up at about 3/4 of the screen, so I can view only Firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full view
== This happened ==
Every time Firefox opened

Your code is absolutely unreadable - even if someone was willing to
help, it's simply impossible. I do give you a few tips, though: If you
understand your code (i.e. if it really is YOUR code), you should be
able to realize that your minimum and maximum never get set (thus they
are both 0) and your exam 3 is set with the wrong value. SEE where
those should get set and figure out why they're not. Chances are you
are doing something to them that makes one 'if' fail or you just
erroneously assign a wrong variable!

Horizontal scroll bar in AWT List

I need to shrink the width of my list by putting a horizontal scroll bar. Does anyone know how to add one onto my list component

The code looks like this. I can really use some help here.
Label grp = new Label("Group By:");
     buildConstraints(constraints, 0, 2, 1, 1, 1, 1);
     gridbag.setConstraints(grp, constraints);
     add(grp);
     grplist = new List(4, false);
buildConstraints(constraints, 1, 2, 1, 1, 1, 1);
     gridbag.setConstraints(grplist, constraints);
     for(i = 0; i <= number_of_fields; i++){
          grplist.add(data[0]);
add(grplist);
     data6 = new Checkbox("6 sigma data",false);
     buildConstraints(constraints, 1, 12, 1, 1, 1, 1);
     gridbag.setConstraints(data6, constraints);
     add(data6);
     show = new Checkbox("Show values",false);
     buildConstraints(constraints, 1, 13, 1, 1, 1, 1);
     gridbag.setConstraints(show, constraints);
     add(show);
     aver = new Checkbox("Plot Average",false);
     buildConstraints(constraints, 1, 14, 1, 1, 1, 1);
     gridbag.setConstraints(aver, constraints);
     add(aver);
     remove(aver);

Horizontal scroll bar muti select list

Hi,
I have a multi select list the size of which is restricted doe to other items on the page but some of the values in the lov are wider that the display area, is it possible to get a scroll bar at the bottom so users can scroll alaong and see the few values that are too big.
Thanks Andy

The code looks like this. I can really use some help here.
Label grp = new Label("Group By:");
     buildConstraints(constraints, 0, 2, 1, 1, 1, 1);
     gridbag.setConstraints(grp, constraints);
     add(grp);
     grplist = new List(4, false);
buildConstraints(constraints, 1, 2, 1, 1, 1, 1);
     gridbag.setConstraints(grplist, constraints);
     for(i = 0; i <= number_of_fields; i++){
          grplist.add(data[0]);
add(grplist);
     data6 = new Checkbox("6 sigma data",false);
     buildConstraints(constraints, 1, 12, 1, 1, 1, 1);
     gridbag.setConstraints(data6, constraints);
     add(data6);
     show = new Checkbox("Show values",false);
     buildConstraints(constraints, 1, 13, 1, 1, 1, 1);
     gridbag.setConstraints(show, constraints);
     add(show);
     aver = new Checkbox("Plot Average",false);
     buildConstraints(constraints, 1, 14, 1, 1, 1, 1);
     gridbag.setConstraints(aver, constraints);
     add(aver);
     remove(aver);

Help with a vertical scroll bar issue with a List component

hi. i have a basic <s:list> that uses an XMLListCollection as it's data provider and a very basic itemrenderer. when a row in the list is clicked a function gets the list.selectedIndex then populates some text fields with more xml data. that all works fine.. the problem i have is that the vertical scroll bar on the list seems to be "clickable" - just like a row in the list. the scroll bar scrolls normally but when it's clicked the selectedIndex becomes -1 which is not helpful b/c the value -1 is passed to the XMLListCollection.
any ideas? cheers.

thanks but still problematic...surely the <s:List> component shouldn't return a value when the scrollbar thumb is clicked? i created a very basic list (see below) and made the list dimensions short enough so that there is a vertical scrollbar and found that when the scrollbar thumb is clicked the trace(event.currentTarget.selectedIndex) returns a number. that's annoying b/c i just want a selectedIndex value for a row that is clicked not the scrollbar.
any ideas to get around? cheers
<fx:Script>
<![CDATA[
protected function list1_clickHandler(event:MouseEvent):void
trace(event.currentTarget.selectedIndex);
]]>
</fx:Script>
<s:List x="162" click="list1_clickHandler(event)" y="276" labelField="@label" width="144" height="153">
<s:dataProvider>
<s:XMLListCollection>
<fx:XMLList xmlns="">
<node label="one"/>
<node label="two"/>
<node label="three"/>
<node label="four"/>
<node label="five"/>
<node label="six"/>
<node label="seven"/>
<node label="eight"/>
<node label="nine"/>
<node label="ten"/>
<node label="eleven"/>
</fx:XMLList>
</s:XMLListCollection>
</s:dataProvider>
</s:List>

Horizontal Scroll bar in a list Box?

Hi,
I have a requirement in Adobe Designer where my List Box should also show Horizontal Scroll bar in it.
Is it possible?
Thanks.

Thanks Debadas,
But i need both (Horizontal & Vertical) the scroll bars and depending on the data length either or both should be visible, without changing the data visiblity or text rotation.
Regards,

Scroll bar error in list box

Hello all,
I work for a company using BI 7.0.
We provide reports in Bex Web 7.0 to our users. They requested us for a problem in list box of selection (or filter).
for example the user wants to filter on a characteristic. This characteristic has multiple possible values.
He chooses a value on the first page of the list box. then he wants to select an other value and uses the scroll bar. So he clicks in the gap of the scroll bar in order to go to the next page of values. It happens correctly but we figured out that doing so the new page wasn't exactly the exact next values available.
Indeed for example the first page displays 10 values (from 1 to 10) so by clicking in the gap we should go to the 10 next values 11 to 20 but it is not what is happening because the displayed values are 13 to 22, so the values 11 and 12 were passed by the scroll bar and we need to do singles click on the scroll bar to display values 11 and 12.
Does someone have an answer for this issue ?
Thank you by advance.
Jérémy

Thank you for your answer Michael.
I tried to apply the modification but there was no fix to my problem.
Here are screenshots to explain my problem :
Screen 1 = First page
http://www.monsterup.com/image.php?url=upload/1264688014660.jpg
Screen 2 = second page
http://www.monsterup.com/image.php?url=upload/1264688015650.jpg
Screen 3 = missigne values between fisrt and second page
http://www.monsterup.com/image.php?url=upload/1264688015672.jpg
Any other clue ?
Thanks
Jérémy

About scroll bar in list

Similar Messages

Maybe you are looking for