About testing Alert window

Hi, all
I'm doing some test that involves alert popup windows. During the test the button's click event is dispatched and an alert window is poped up to confirm the operation. The program will not proceed unless the "OK" button of the alert window is clicked. However I can't find the reference to the alert window and the button on it. Can someone give me some hint, please. Thanks alot~
spt.

Ideally the code should expose the Alert instance that was created so
the test could access it. If that isn't possible Alert instances are
managed by the PopUpManager, which if you muck with the instance's
mx_internal popupInfo you could get a reference to the Alert.
-- Daniel R. <[email protected]> http://danielr.neophi.com/
On Mon, Aug 23, 2010 at 6:55 AM, sotestspacetimeriskind

Similar Messages

Sometimes I turn off my internet router intentionally & Firefox puts up an alert window about it being off. How do I disable this alert window?

When I'm out or go to bed at night, I turn off my wireless internet router. Sometimes I turn it off when I'm just going to be doing something that doesn't require me to be online. Whenever I do this, Firefox keeps putting up an alert window every two minutes telling me I have no connection (which I know). How do I disable this alert window so it doesn't keep showing up in the middle of a game or a document I'm doing?

Its an addon, not firefox.
Start Firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode to Troubleshoot the issue] and to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

There is an icon in the upper right hand corner about test your internet connection speed. is this malware

''locking - dupe of https://support.mozilla.org/en-US/questions/976623''
there is an icon in the upper right hand corner about test your internet connection speed. is this malware

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Failed Alert window when application loaded from SWFLoader

For example i've created two simple application.
Parent application must to load another child application
Main.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
               creationPolicy="all">
    <mx:SWFLoader id="subApp1" trustContent="true" source="../subapp/Subapp.swf"/>
</s:Application>
In child application i only call Alert.show in button click event.
Subapp.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
               pageTitle="Subapplication"
               xmlns:ns1="*" width="600" height="1000"
               creationPolicy="all">
    <s:Button id="btnAlert" label="Alert" click="Alert.show('test mess', 'Title')"/>
</s:Application>
As a result we receive an Alert-window displaced upwards of a window of a browser.
Screenshot:
Instead of a usual window which is normally displayed if child application to call directly
Screenshot:
The problem can be solved if i specify parent object for Alert call
<s:Button id="btnAlert" label="Alert" click="Alert.show('test mess', 'Title', Alert.OK, this)"/>
But it is not the desirable decision as the real child application very big.
Somebody worked with this sort of problems?
How it probably to solve?
Thank you very mach!

Harbs,
Things are getting weird here...
This is a crop of the GUI in Halo:
and this is what the CS Extension Builder theme looks like:
There's no more the vertical separator *nor* the arrow in the combobox! Let alone that the plus button has gotten a crazy size.
Uhm... it seems like there's something wrong.
And by the way, no matter what theme I chose, my Design tab always shows the bluish GUI:
Being Halo, shouldn't it be gray? Why on earth it's grayish blue to me?!
I've had some random warnings, not specifically in this project, like:
"Design mode: Cannot load CSXSLibrary-2.0-sdk-3.4-public.swc (reason: ERROR: Load Verify). It may require classes (such as Adobe AIR components) that are not supported by design mode. Check the Eclipse error log for more details. main.mxml /01/src Unknown Problem"
I'm wondering whether FB has some troubles with the preferences...
Could someone please test whether the change in theme leads to these dramatic changes in appearance?
Is it correct that the default appearance is this (bluish) one?
Thanks,
Davide

Everytime Adobe Reader 9 is extracting installation files, about half way, Windows XP SP3 reboots

Everytime Adobe Reader 9 is extracting installation files, about half way, Windows XP SP3 reboots. Therefore, I am unable to install the Adobe Reader on my computer. I would appreciate any help you can provide.

Thanks for the replies. I have followed most of the suggestions given in "Test Screen Name" response. Unfortunately, I have not been able to correctly identify and eliminate rootkit infections (viruses), if any. Furthermore, even when I try to install Adobe Reader X, the system freezes when about 53% of the installation is complete. I am still trying to figure this problem out.
Good news!
I just installed Adobe Reader 11 and it worked beautifully!
Thanks again for your suggestions.

How to get specific message on Alert Window as Window Title.

Hi all,
I want to know if it is possible to get Personal Message on Alert Window, instead of "Microsoft Internet Explorer" in JSP.
Like on alert window , instead of "Microsoft Internet Explorer", I want to show "My Project" as Window Title.
Thanks in advance.
Jitin

If you don't want it to say "Microsoft Internet Explorer," you can use a different browser. :-)
But, seriously...
If you really want to customize the appearance of a dialog, you can make one with DHTML that looks like anything you want. You can make it look like a system dialog if you want, but you don't have to. (In fact, if you make it look like a Windows dialog, it will stick out like a sore thumb if someone is using another OS.)
I had to create some of these for an online testing application I wrote, because they wanted the tests to be timed, and I discovered that, in Internet Explorer, you could stop the clock just by opening certain dialogs, so I had to suppress "right-clicking," remove the menu bars, and use custom dialogs to communicate with the user. Since then I've re-used these dialogs in a number of other projects. They're pretty handy.

Alert window in openscript

Hi All,
I'm recording a siebel script in OPENSCRIPT.My siebel(v8.0) application has a VALIDATE button which on clicking throws a ALERT windowwith msg: OM00194: Validations are Successful
During recording,this ALERT window is not being captured.So,the script fails at this stage during playback.Error msg is:
Siebel content failure. Siebel Error: 8126615OM00194: Validations are Successful
I'm attaching the java code for the step:
beginStep("[15] VerifyOrder", 4297);
               http.post(155, "http://10.196.215.47/ecommunications_enu/start.swe", null, http.postdata(http.param("s_1_1_37_0", "{{_Siebel_CORRLIB_FIELD_1245668427044__S_BC1_S75_R04_F36_#_Walk-In}}"), http.param("SWER", "0"), http.param("SWEVI", ""), http.param("SWERowId", "{{_Siebel_CORRLIB_ROWID_1245668390059__S_BC1_S39_R01_FID_#_1-2GUS74}}"), http.param("SWEMethod", "VerifyOrder"), http.param("SWEC", "{{@SWECInc(1)}}"), http.param("SWEReqRowId", "1"), http.param("SWERPC", "1"), http.param("SWENeedContext", "true"), http.param("SWEApplet", "BSNL Order Entry - Order Form Dashboard"), http.param("SWEActiveApplet", "BSNL Order Entry - Order Form Dashboard"), http.param("SWEView", "BSNL Order Entry - Detail Orders View"), http.param("SWEField", "s_1_1_47_0"), http.param("SWECmd", "InvokeMethod"), http.param("SWESP", "false"), http.param("s_1_1_43_0", "N"), http.param("s_1_1_33_0", ""), http.param("SWEBID", "-1"), http.param("SWEActiveView", "BSNL Order Entry - Detail Orders View"), http.param("s_1_1_45_0", ""), http.param("s_1_1_23_0", ""), http.param("SWEDIC", "false"), http.param("SWEP", ""), http.param("SWERowIds", "")), null, true, "UTF8", "UTF8");
                    siebel.solve("_Siebel_CORRLIB_FIELD_1245668442060__S_BC1_S75_R03_F41_#_N", "_Siebel_CORRLIB_FIELD__TEXT", null, false, Source.Html);
          endStep();
Pls suggest how to capture alert window in openscript.

Hi
The alert will only happen if you are sending data that is not in the correct format, Siebel is very picky about this things, there is no workaround for this or need for one, you just need to send the correct data and the error message will not be generated.
Make sure that you are not sending duplicates or erroneous data , note that the error is occurring during the verifyOrder call if the order is correct, you will not get the error message.
Regards
Alex

Hp Envy Dv7t Quad Edition NOT tested for Windows 10

I have been waiting for 5 days for the windows 10 update, my windows app says notify me when ready, i check tge update history and it has over 10+ failed attempts to install this new operating system.I havnt gotten a notification even tho it has been trying to download but failing. I tried the command prompt trick to force it and i waited 4 hours until it all downloaded. Then it was preparing to install and it failed. I've also checked if it is even compatible as i bought it january 2013 but it had windows 8 at the time. It tells me on the hp site that it hasnt been tested for Windows 10 and that is my theory on why my update has failed constantly. Even the update trouble shooters show the problem and cant fix it. I dont know what to do at this point i know im not going to maually do it using the creation tool. I am hoping i can get answers or get hp to verify my computer so i can finaly upgrade to windows 10 since it has tried to download and now i am in deep teritory of fear ill mess up my computer. If anyone can help get my model verified or give me a logical answer, i will be gratful.

Hi all. First off, I'm on a HP ENVY TouchSmart m6-k015dx Sleekbook, Windows 10. I've had it for two years now. A while back, it fell off of my bed in college but I didn't have any trouble with it until recently.
It took me a while to discover the issue, I thought it was the touch pad because after updating to Windows 10, my buttons on the touch pad will not work. But sometimes when I would adjust my screen, it causes the cursor to move on its own, a bunch of these clear dots show up all down the middle of the screen, and it just clicks and moves things on its own. It's very annoying. The only temporary fix I have found is to use a little pressure onto the touch screen with my hands. It seems to send it back to normal until it acts up again. I'm just wondering, could me dropping it all those months ago be the cause? Should I take it to the shop? It's my school computer so it would have to be either a quick fix over a weekend or something because I need it for school. I've saw others have this same problem and it recommended to download some update, but where I'm windows 10 I can't find it. I just got to thinking that maybe it's where I dropped it a while back. The issue is very annoying and if there's a way to either disable the touch screen or something for Windows 10 to download to maybe try and fix it, that'd be great. It started this over the summer and I'm about to start classes again so I'd hate for this to be an ongoing issue while doing papers and the like.

Problème de téléchargement de Photoshop Elément 10 version test sur Windows 7

Le téléchargement de la version de test de Photoshop Elément 10 sur PC Windows 7 semble bien se passer et pourtant je n'en trouve aucune trace.

Merci pour cette réponse mais j'avais fait ce contrôle avant d'envoyer mon message.
Date: Mon, 6 Feb 2012 14:39:47 -0700
From: [email protected]
To: [email protected]
Subject: Problème de téléchargement de Photoshop Elément 10 version test sur Windows 7
    Re: Problème de téléchargement de Photoshop Elément 10 version test sur Windows 7
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You should be able to locate the application under Start>All Programs. Vous devriez être en mesure de localiser l'application dans le menu Démarrer> Tous les programmes.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4189611#4189611
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4189611#4189611. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

DTM test on Windows Vista

Hi,
I want to do DTM test for Windows Vista, Win 7, Win 8 and Win 12. I am able to perform DTM test for Win 7, Win 8 and Win 12 using HCK 2.1 however HCK 2.1 is not supporting Windows vista. Also as per Microsoft "HCK 2.0 is now retired and no further submissions
will be accepted using that kit". I want to know whether I can DTM test for Win Vista. If it is possible with earlier version then would I able to merge Win Vista result with other OS e.g. Win7 or Win 8.
Thanks,
Sach

Hi,
I want to do DTM test for Windows Vista, Win 7, Win 8 and Win 12. I am able to perform DTM test for Win 7, Win 8 and Win 12 using HCK 2.1 however HCK 2.1 is not supporting Windows vista. Also as per Microsoft "HCK 2.0 is now retired and no further submissions
will be accepted using that kit". I want to know whether I can DTM test for Win Vista. If it is possible with earlier version then would I able to merge Win Vista result with other OS e.g. Win7 or Win 8.
Thanks,
Sach
Hi Sach,
If you just need to gets a WHQL signature for Windows Vista, then you can run HCK test/submit Win8.1 certification and gets WHQL signature for Vista. Please refer the screenshot and latest WLP.
PS. You have to make sure your device driver no issue on Vista before to do this.
Thanks, Steve

I like ti known about compatibility between Windows 8 and iTunes

I like ti known about compatibility between Windows 8 and iTunes

It works for some and not for others.
At this time, there is no publicly available version of iTunes that is supported on Windows 8.
Only Apple knows when that will change.

How to put variable value in Alert window?

Hi, everytime I use:
Alert.show("this is the value of the variable: " +
theVariableName);
the alert stops working and no error message was given.
Does anyone know how to put the variable inside the Alert
window?

Is theVariableName defined in the object that is opening the
Alert window?
If you can post your code it will help.

Thoughts about the bin window - bugs or features and workarounds...

Hi there,
I really have big toubles using the bin window. It is even worse in OSX.5 (the only thing I don't like with OSX.5 and Logic8!).
There are some Problems:
1. I can't move any audio-files to wherever I want them to without Logic is copying them back into the audio-folder by saving the song. The problem is that I want Logic to copy imported audio files into the audio-folder but if I change something manually Logic should remember that without working against me. So for example: I am bouncing a lot of audio into the bounce folder. In Logic 7 all the finished bounces were located there on the hard drive. Easy to find and to organize. But in Logic 8 they are moved to the audio-folder and I have to search very carefully which files I want to send to my client. That's the biggest source of trouble for me right now.
2. If I am making groups, Logic is sometimes copying even that audio-files back into the normal audio-folder. The problem here is: sometimes. I really have no idea what the problem is. Sometimes just some audiofiles are staying in the group (on the hd) for a couple of Logic-saves and then are moved back at the 10th save or something.
3. I am not able to organize my groups and audio files very well. So if I have group that always is shown on top of the bin window and I have a audio-bounce called "zoo" it is the last one in the list. Then I have to move it the whole way up to the group. That costs me about a half our per day. Way too much. There should be some kind of easier handling. For example a second window for groups or something. The next one is that I have to call the group something like 001AASFX or ZZZ_SFX so that I am able to find it fast enough in the finder. It was so much easier to go the bounce folder in Logic 7 days.
4. The hide-regions keycommand was unstable with OSX.4.10 but now with OSX.5 it is not working at all. If I choose a audiofile in the bin window and hit the standard keycommand for hiding regions just the region for that audiofile is hiding and instantly shown again. I want to have a shorter way to move my bounced files into the group that is the whole way up to the list's beginning.
So I wonder if that are new features or if it is really buggy. I am not able to work with that structure right now and with that kind of unstable location behavior. Are there any workarounds, tips, tricks? Is there anyone who feels like me? May I hope for a update?
That's it
Xcell
Message was edited by: Axel Rohrbach

Hey Jim,
thanks for the support. Seems to be something Apple has to work on. There are some posts and questions about the bin window in every forum I know but there is never a "this is not want we want and there are bugs" - thread. In fact the whole Logic 8 structure with the one-window-gui is great and works much better than I expected. So it is no general "what the **** are they doing"-thing
Nevertheless, is there a way to get this to apple? I don't know if they are aware of these problems and perhaps the testers are making music with one bounce and that's it. Just one file is not that difficult to handle, organize and to find. But there are other users working in different ways (like us I think).
@ David: I am sorry but you are wasting time and thread-space. If you don't say anything if you do not feel comfortable nothing will change. You are not able to let it rain in Austria (yet) but there are real guys working at apple and it's not a kind of wonder that there is logic at all. So am trying to discuss here something and hope for any reaction or attention and don't need any "go deeply into your self and you will find a way"-stuff. Thanks anyway to bring god back to that forum.
Xcell
Message was edited by: Axel Rohrbach

About 64 bit window

hello! my question about 64 bit window is that
is it possible that in case of data corrupted we can copy files from 64 bit window secondary partition to DOS BOOTABLE USB drive of FAT16 ?
as 64 bit window supports NTFS and FAT 16 is for smaller capacity then how can we done this
kindly guide
saiq@

Sheng thought probably you understood something from Internet
answers.microsoft.com
Double Click on that link then it opens
Toy cab also copy it and past in your browser
Success
Cor

Create Unit Test Vectors From The Unit Test Configuration Window

I have recently been using more test vectors in the unit test framework.
The principle works well but if you are in a unit test and decide you need a test vector you must:
Close the unit test configuration
Create a test vector
Set up your vector (entering values and data types, which is much easier if you could see the actual unit test case)
Close the vector configuration window
Open the unit test configuration
Assign the new vector file to the unit test
Now you can assign vectors to test inputs
This seems convoluted and forces unnecessary context switchs.
I propose that at a minimum, you should be able to create a new vector file and launch it's configuration without leaving the unit test configuration window. I suspect that the whole process could be streamlined even further though.
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

Oops supposed to be ideas exchange, sorry!
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

About testing Alert window

Similar Messages

Maybe you are looking for